Background Mobile phone addiction has attracted widespread attention in society,and psychological abuse and neglect is an important factor in predicting mobile phone addiction,whereas limited research has been done to evaluate its impact on mobile phone addiction.Objective To explore the correlation of psychological abuse and neglect with mobile phone addiction,and to test the pathway of self-esteem and interpersonal alienation,so as to provide references for preventing and curbing mobile phone addiction in junior high school students.Methods In May 2022,a cluster sampling was utilized to select 800 students in two middle schools in a county of Hainan Province,and all students were assessed using Child Psychological Abuse and Neglect Scale(CPANS),Mobile Phone Addiction Index(MPAI),Rosenberg Self-esteem Scale(SES)and Interpersonal Alienation Scale of Adolescent StudentsAlienation Scale.Pearson correlation analysis was adopted to determine the correlation among the above-mentioned scales,and Process Macro 3.5 for SPSS was used to test the mediation effect.Results CPANS score was negatively correlated with SES score(r=-0.278,P<0.01),and positively correlated with Interpersonal Alienation Scale score and MPAI score(r=0.471,0.372,P<0.01).SES score was negatively correlated with Interpersonal Alienation Scale score and MPAI score(r=-0.438,-0.196,P<0.01).Interpersonal Alienation Scale score was positively correlated with MPAI score(r=0.392,P<0.01).Interpersonal alienation(indirect effect value was 0.104)played a mediation role in the relationship between psychological abuse and neglect and mobile phone addiction.Self-esteem and interpersonal alienation exhibited a chained mediation effect on the relationship between psychological abuse and neglect and mobile phone addiction(indirect effect value was 0.026),accounting for 6.99%of the total effect.Conclusion Psychological abuse and neglect can not only directly predict mobile phone addiction,but also can indirectly affect mobile phone addiction through separate mediation of interpersonal alienation or chained mediation of self-esteem and interpersonal alienation.

Objective To investigate the influence of different cell structures on the static and dynamic mechanical performance of porous titanium alloy scaffolds,and to provide a theoretical mechanical basis for the application of scaffolds in the repair of mandibular bone defects.Methods Porous titanium alloy scaffolds with diamond,cubic,and cross-sectional cubic cell structures were manufactured using three-dimensional printing technology.Uniaxial compression tests and ratcheting fatigue with compression load tests were conducted to analyze the static and dynamic mechanical performances of scaffolds with different cell structures.Results The elastic moduli of the diamond cell,cross-sectional cubic cell,and cubic cell scaffolds were 1.17,0.566,and 0.322 GPa,respectively,and the yield strengths were 71.8,65.1,and 31.8 MPa,respectively.After reaching the stable stage,the ratcheting strains of the cross-sectional cubic,diamond,and cubic cell scaffolds were 3.3%,4.0%,and 4.5%,respectively.The ratcheting strain increased with increasing average stress,stress amplitude,and peak holding time,and decreased with increasing loading rate.Conclusions The evaluation results of the static mechanical performance showed that the diamond cell scaffold was the best,followed by the cross-sectional cubic cell scaffold and the cubic cell scaffold.The evaluation results of the dynamic mechanical performance showed that the cross-sectional cubic cell scaffold performed the best,followed by the diamond cell scaffold,whereas the cubic cell scaffold performed the worst.The fatigue performance of the scaffold is affected by the loading conditions.These results provide new insights for scaffold construction for the repair of mandibular bone defects and provide an experimental basis for further clinical applications of this scaffold technology.

Objective To study stress relaxation behaviors of cartilage scaffolds under different degradation cycles by using finite element analysis combined with theoretical models. Methods Based on the established degradation theoretical model, the elastic modulus of the scaffold was calculated under different degradation cycles. The finite element model of cartilage scaffolds was established and stress relaxation simulation was performed to analyze the variation of scaffold relaxation stress with time. The stress relaxation constitutive model was established to predict mechanical properties of the scaffold. Results The elastic modulus of cartilage scaffolds at 14 th, 28th, 42nd, 56th day after degradation was 32. 35, 31. 12, 29. 91, 28. 74 kPa, respectively. The upper layer for cartilage scaffolds was the largest. The overall relaxation stress of the scaffold decreased rapidly with time and then tended to be stable. At 8th week after degradation, the stress which the scaffold couldwithstand was still within the physiological load range of the cartilage. The predicted results of the stress relaxation constitutive model were in good agreement with the finite element simulation results. Conclusions The elastic modulus of the scaffold gradually decreases with the increase of degradation time. The longer the degradation period is, the less stress the scaffold can withstand. At the same degradation period, the larger the applied compressive strain, the larger the stress on the scaffold. Both the finite element simulation and stress relaxation constitutive model can effectively predict stress variations of cartilage scaffolds under degradation

Objective:To systematically review the disease treatment and management experience of parents of children with attention deficit hyperactivity disorder (ADHD) .Methods:Qualitative or mixed studies on the treatment and management experience of parents of children with ADHD were searched in databases such as PubMed, Embase, Cochrane Library, Web of Science, PsycINFO, Scopus, CINAHL, ProQuest, China National Knowledge Infrastructure, WanFang Data, and VIP. The search period was from database establishment to October 8, 2022. The quality of the included literature was evaluated using the quality evaluation criteria for qualitative research of the Joanna Briggs Institute Evidence-Based Health Care Center. Nvivo 11 software was used to integrate the results through aggregation integration methods.Results:A total of 13 articles were included and 36 research results were extracted.The results were categorized into 10 new categories and formed into 4 integrated results, including the impact of disease cognition of parents of children with ADHD on medical seeking behavior, psychological adjustment of parents of children during treatment, disease response of parents of children, and social resource needs for treatment and management of children.Conclusions:The role and responsibility of parents in the treatment and management of ADHD children are very important. We need to strengthen the popularization of knowledge about ADHD, enhance parents' awareness of the disease, pay attention to parents' psychological status, provide multi-channel social support, meet the treatment and educational needs of children, and promote the construction of an individualized and multidisciplinary comprehensive management system to improve the short-term and long-term outcomes of ADHD children.

Objective To study the effect of irrigation mechanical stimulation on scaffold degradation by numerical simulation, so as to predict its degradation degree. MethodsBased on perfusion experimental data, the fluid-solid coupling model was established by Comsol. The finite element model of scaffold was established by ABAQUS. Based on the models, the degradation performance of scaffold was simulated and predicted. Results The fluid-solid coupling simulation showed that the initial pressure at the speed of 15.79 mL/min was two-fold of that at 7.89 mL/min. Along the thickness of scaffold from the surface to the bottom, the pressures between the two velocities were decreased and gradually close to each other. The degradation of scaffold structure could be simulated dynamically by combining the degradation constitutive model with the finite element model. The obtained degradation data were consistent with the experimental data, and the residual molecular weight reached 0.643 on the 56th day. Compared with the experimental data, the simulation accuracy was higher than 98%. Conclusions The larger the perfusion velocity is, the greater the pressure on scaffold will be. Under the same perfusion velocity, the maximum force occurs on the surface of scaffold. The degradation pattern of scaffold can be predicted by applying the degradation constitutive model and the finite element model.

The small molecule nutrients and cell growth factors required for the normal metabolism of chondrocyte mainly transport into the cartilage through free diffusion. However, the specific mass transfer law in the cartilage remains to be studied. In this study, using small molecule rhodamine B as tracer, the mass transfer models of cartilage were built under different pathways including surface pathway, lateral pathway and composite pathway. Sections of cartilage at different mass transfer times were observed by using laser confocal microscopy and the transport law of small molecules within different layers of cartilage was studied. The results showed that rhodamine B diffused into the whole cartilage layer through surface pathway within 2 h. The fluorescence intensity in the whole cartilage layer increased with the increase of mass transfer time. Compared to mass transfer of 2 h, the mean fluorescence intensity in the superficial, middle, and deep layers of cartilage increased by 1.83, 1.95, and 3.64 times, respectively, after 24 h of mass transfer. Under lateral path condition, rhodamine B was transported along the cartilage width, and the molecular transport distance increased with increasing mass transfer time. It is noted that rhodamine B could be transported to 2 mm away from cartilage side after 24 h of mass transfer. The effect of mass transfer under the composite path was better than those under the surface path and the lateral path, and especially the mass transfer in the deep layer of cartilage was improved. This study may provide a reference for the treatment and repair of cartilage injury.
Cartilage, Articular ; Rhodamines/pharmacology* ; Chondrocytes

Objective:To compare the efficacy of 3D printing technology-assisted and conventional open reduction and internal fixation of multiple rib fracture.Methods:A retrospective cohort study was conducted to analyze the clinical data of 61 patients with multiple rib fracture admitted to Mindong Hospital Affiliated to Fujian Medical University and Fujian Provincial Hospital from July 2018 to March 2020. There were 44 males and 17 females, with age range of 18-73 years [(45.1±12.9)years]. Unilateral lung contusion and laceration occurred in 31 patients, while bilateral in 30. There were 19 patients accompanied by hempneumothorax and 16 by flail chest. Totally, 31 patients received 3D printing technology assisted open reduction and internal fixation (3D-assisted incision group) and 30 patients received conventional open reduction and internal fixation (conventional incision group). The incision length, operation time, intraoperative blood loss, postoperative 3-day visual analogue scale (VAS), duration of pain, indwelling time of chest tube, total length of hospital stay, postoperative bone callus formation time and rate of rib bone plate loosening were comapared in two groups. The short form 36 health survey (SF-36) score (ie, physical function, physical function, physical pain, general health, energy, social function, emotional function, mental health) preoperatively, at postoperative 6-month and at the last follow-up was compareted between two groups. Complications were observed at the same time.Results:All patients were followed up for 18-38 months [(26.4±5.5)months]. In 3D-assisted incision group, the incision length was (5.9±1.3)cm, with operation time for (84.6±7.8)minutes, intraoperative blood loss for (85.5±13.9)ml, postoperative 3-day VAS for (2.5±0.5)points, duration of pain for (5.9±0.7)days, indwelling time of chest tube for (3.4±0.7)days, total length of hospital stay for (7.0±1.0)days, postoperative callus formation time for (2.6±0.7)weeks and rate of rib bone plate loosening for 3.2%(1/31). By contrast, in conventional incision group, the incision length was (10.9±2.4)cm, with operation time for (127.1±12.5)minutes, intraoperative blood loss for (183.0±30.9)ml, postoperative 3-day VAS for (6.5±0.9)points, duration of pain for (11.2±1.8)days, indwelling time of chest tube for (7.8±0.8)days, total length of hospital stay for (15.1±1.2)days, postoperative callus formation time for (4.6±0.8)weeks and rate of rib bone plate loosening for 20.0%(6/30) ( P<0.05 or 0.01). There was no significant difference in preoperative SF-36 score between the two groups ( P>0.05). At 6 months after surgery, the subscores of SF-36 in 3D-assisted incision group were higher than those in conventional incision group except for "mental health" ( P<0.05 or 0.01). At the last follow-up, all the subscores of SF-36 in 3D-assisted incision group were higher than those in conventional incision group ( P<0.05 or 0.01). There were no obvious complications such as pulmonary infection or atelectasis. Conclusions:For multiple rib fracture, 3D printing technology-assisted open reduction and internal fixation is superior to conventional open reduction and internal fixation for it can shorten incision length, operation time, indwelling time of chest tube, total length of hospital stay and postoperative bone callus formation time, reduce intraoperative blood loss, relieve postoperative pain, reduce rate of rib bone plate loosening and improve quality of life of the patients.

The vagina contains at least a billion microbial cells,dominated by lactobacilli.Here we perform metagenomic shotgun sequencing on cervical and fecal samples from a cohort of 516 Chinese women of reproductive age,as well as cervical,fecal,and salivary samples from a second cohort of 632 women.Factors such as pregnancy history,delivery history,cesarean section,and breastfeeding were all more important than menstrual cycle in shaping the microbiome,and such information would be necessary before trying to interpret differences between vagino-cervical micro-biome data.Greater proportion of Bifidobacterium breve was seen with older age at sexual debut.The relative abundance of lactobacilli especially Lactobacillus crispatus was negatively associated with pregnancy history.Potential markers for lack of menstrual regularity,heavy flow,dysmenor-rhea,and contraceptives were also identified.Lactobacilli were rare during breastfeeding or post-menopause.Other features such as mood fluctuations and facial speckles could potentially be predicted from the vagino-cervical microbiome.Gut and salivary microbiomes,plasma vitamins,metals,amino acids,and hormones showed associations with the vagino-cervical microbiome.Our results offer an unprecedented glimpse into the microbiota of the female reproductive tract and call for international collaborations to better understand its long-term health impact other than in the settings of infection or pre-term birth.

RNF20, an E3 ligase critical for monoubiquitination of histone H2B at lysine 120 (H2Bub), has been implicated in the regulation of various cellar processes; however, its physiological roles in adipocytes remain poorly characterized. Here, we report that the adipocyte-specific knockout of Rnf20 (ASKO) in mice led to progressive fat loss, organomegaly and hyperinsulinemia. Despite signs of hyperinsulinemia, normal insulin sensitivity and improved glucose tolerance were observed in the young and aged CD-fed ASKO mice. In addition, high-fat diet-fed ASKO mice developed severe liver steatosis. Moreover, we observed that the ASKO mice were extremely sensitive to a cold environment due to decreased expression levels of brown adipose tissue (BAT) selective genes, including uncoupling protein 1 (Ucp1), and impaired mitochondrial functions. Significantly decreased levels of peroxisome proliferator-activated receptor gamma (Pparγ) were observed in the gonadal white adipose tissues (gWAT) from the ASKO mice, suggesting that Rnf20 regulates adipogenesis, at least in part, through Pparγ. Rosiglitazone-treated ASKO mice exhibited increased fat mass compared to that of the non-treated ASKO mice. Collectively, our results illustrate the critical role of RNF20 in control of white and brown adipose tissue development and physiological function.

Objective:To investigate the clinical effect of thoracoscopy combined with puncture-positioned internal fixation of multiple rib fractures accompanied with hemopneumothorax.Methods:A retrospective case-control study was used to analyze the clinical data of 68 patients with multiple rib fractures accompanied with hemopneumothorax admitted to Fujian Provincial Hospital from September 2016 to December 2018, including 49 males and 19 females, aged 25-86 years [(47.3±7.4)years]. There were 55 patients with unilateral lung contusion and laceration, and rest 13 patients with bilateral lung contusion and laceration. A total of 36 patients were treated by thoracoscopy combined with puncture-positioned internal fixation (thoracoscopy group) and 32 patients by open reduction group (open reduction group). The incision length, operation time, intraoperative blood loss, chest tube drainage time, ICU hospitalization time, total hospitalization time, and complications were recorded. Numeric rating scale (NRS) score was assessed at postoperative 1, 2, 3, 7 days. The MOS 36-item short-form health survey (SF-36) was conducted at the latest follow-up.Results:All patients were followed up for 8-34 months [(18.9±4.3)months]. Thoracoscopy group showed incision length of (4.3±1.3)cm, operation time of (66.3±12.1)minutes, intraoperative blood loss of (86.5±23.4)ml, chest tube drainage time of (5.3±1.1) days, ICU hospital stay of (2.3±0.8)days, total hospital stay of (6.8±1.7)days, and total complication rate of 8%, showing significant differences compared to open reduction group [(11.6±2.2)cm, (105.9±19.4)minutes, (191.4±35.6)ml, (8.1±1.6)days, (4.7± 1.4)days, (10.6±2.1)days, 29%] ( P<0.05 or 0.01). In thoracoscopy group, the NRS scores at day 1, 2, 3, and 7 were respective (6.6±1.2)points, (5.9±1.0)points, (4.4±0.9)points and (2.7±0.7)points, significantly lower than those in open reduction group [(7.3±1.2)points, (7.0±1.1)points, (5.7±1.0)points and (3.9±0.8)points] ( P<0.05 or 0.01). The SF-36 score in thoracoscopy group was (86.4±12.1)points, significantly higher than that in open reduction group [(75.6±11.5)points] ( P<0.01). Conclusions:Compared with open reduction and internal fixation, thoracoscopy combined with puncture-positioned internal fixation for multiple rib fractures has the advantages of smaller surgical incision, shorter operation time, less intraoperative bleeding, shorter chest tube drainage time, shorter ICU hospital stay, shorter total hospital stay, and less postoperative complications. The technique can also reduce the postoperative pain and improve the patients' quality of life.