Linxian County in Henan Province, Northern China is known as the region with the highest incidence and mortality rate of esophageal cancer worldwide. Since 1959, the Henan medical team has conducted field work on esophageal cancer prevention and treatment in Linxian. Through three generations of effort exerted by oncologists over 65 years of research on esophageal cancer prevention and treatment in Linxian, the incidence rate of esophageal squamous cell carcinoma in this area has dropped by nearly 50%, and the 5-year survival rate has increased to 40%, reaching the international leading level. This article aims to summarize the history, present opportunities and new challenges, and explore the experience of esophageal cancer prevention and treatment in Linxian (referred to as the “Linxian experience”), providing reference and guidance to cancer prevention and treatment research in China.

Objective To investigate the screening results and factors affecting abnormal detection rates among high-risk groups of esophageal cancer and to explore effective intervention measures. Methods We investigated and collected the information on gender, education level, age, marital status, symptoms of reflux esophagitis (heartburn, acid reflux, belching, hiccup, foreign body sensation in the pharynx, and difficulty swallowing), consumption of pickled vegetables, salt use, and esophageal cancer incidence of villagers in a natural village in Wenfeng District, Anyang City, Henan Province. Changes in reflux esophagitis symptoms in the high-incidence area of esophageal cancer before and after 16 years were observed, and the relationship of such changes with esophageal cancer was analyzed. Results In 2008, 711 cases were epidemiologically investigated, including 213 cases with one of the symptoms of reflux esophagitis such as heartburn, acid reflux, belching, hiccups, foreign body sensation in the pharynx, and difficulty swallowing (sorted in accordance with the abovementioned symptoms; if there are multiple symptoms, then the former is taken); 55 cases with at least two related symptoms, among which the most symptom was heartburn in 108 cases (15.1%); followed by acid reflux, belching, etc. In 2024, the same group of people was investigated, and eight people were missing because of relocation. A total of 703 people were successfully investigated, of which 189 cases (26.8%) had one of the symptoms of reflux esophagitis, such as heartburn (sorted in accordance with relevant symptoms, if there are multiple symptoms, then the former will be selected); 167 cases (23.7%) had at least two related symptoms, among which the most symptom was heartburn in 139 cases (19.7%); followed by acid reflux. Over 16 years, among the 703 people investigated, 45 cases had esophageal cancer and they had one or more of the abovementioned symptoms. No significant differences in the reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.26); no significant differences in the composition of reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.299). Conclusion The detection rate of reflux esophagitis-related symptoms in the population in a high-risk area of esophageal cancer has not decreased in the past 16 years, and the high-risk factors still exist. Esophageal cancer is closely related to reflux esophagitis, and clinical practice can provide early diagnosis and treatment for high-risk population.

Objective To investigate the relationship between tooth loss and the occurrence of esophageal cancer in a natural village in Wenfeng District, Anyang City, Henan Province. Methods A prospective cohort study was conducted to observe the occurrence of tooth loss and esophageal cancer among the asymptomatic residents of the natural village for 16 years from January 2008 to July 2024. Data were analyzed by chi-square test, binary logistic regression, and restricted cubic spline. Results Among the total population of 711 cases, 136 cases were lost to follow-up and 575 cases were included in the final statistics, including 45 cases with esophageal cancer. Significant statistical difference was found between esophageal cancer patients with and without tooth loss (P<0.05). Logistic regression analysis showed that tooth loss was associated with the occurrence of esophageal cancer (OR=3.977, 95%CI: 1.543-10.255). After the adjustment for confounders, tooth loss remained significantly associated with the occurrence of esophageal cancer (OR=3.038, 95%CI: 1.035-8.914). A nonlinear dose-response relationship was observed between the number of teeth lost and the incidence of esophageal cancer. When the number of teeth lost was less than 12, the risk of esophageal cancer increased with the number of teeth lost. When more than 12 teeth were lost, the risk of esophageal cancer decreased as the number of teeth lost increased. Conclusion Tooth loss is a risk factor for the occurrence of esophageal cancer in this natural village. When the number of teeth lost is less than 12, the risk of esophageal cancer increases with the number of teeth lost.

Objective To understand the disease spectrum of a natural village in an area with high incidence of esophageal cancer to provide a reference for precise prevention and control. Methods From 2008 to 2024, 711 asymptomatic people over the age of 35 years in a natural village with high incidence of esophageal cancer in China were surveyed, and 171 of them were subjected to gastroscopy, biopsy, and pathological examination. All participants were followed up for a long time, and their disease history was recorded. Results A total of 16 years of follow-up were performed, and 703 people were effectively followed up. In 2008, 171 people underwent gastroscopy, and 160 people had biopsy and pathological results in endoscopic screening. By 2024, 76 people had been diagnosed with malignant tumors of 12 different types, and among these people, 45 had esophageal cancer. Conclusion Esophageal cancer remains a significant cause of morbidity and mortality from malignant tumors in this region. Biopsy and pathological examination should be strengthened during gastroscopy, and follow-ups and regular check-ups should be given high importance to reduce the incidence and mortality rates of esophageal cancer.

Objective To evaluate the role of autophagy in the treatment of neuropathic pain(NP)with hydrogen-rich saline.Methods Forty adult male Sprague-Dawley rats with successful intubation were randomly divided into 5 groups(n= 8)using a random number table:the sham operation group(group S),the neuropathic pain group(group C),the hydrogen-rich saline group(group H),the autophagy inhibitor group(group M)and the hydrogen-rich saline + autophagy inhibitor group(group HM).There were 8 rats in each group.The NP model was established by chronic constriction of the sciatic nerve(CCI)in rats.The autophagy inhibitor 3-methyladenine(3-MA)was intraperitoneally injected with 30μg/kg in the group M and the group HM.The hydrogen-rich saline(0.6 mmol/L)was intraperitoneally injected with 10 mL/kg in the group H and the group HM.The other groups were intraperitoneally injected with the same amount of normal saline twice a day for 7 consecutive days.Paw withdrawal threshold to mechanical stimulation(MWT)and paw withdrawal latency to thermal stimulation(TWL)were measured at 1 day before and 1,3,5,7 and 14 days after modeling(T0-T5).After the last measurement of pain threshold,the L4-L6 segment of spinal cord was removed for determination of the expression of autophagy-related proteins microtubule-associated protein light chain 3(LC3)Ⅱ,Beclin-1 and p62 proteins by Western blot assay.The expression levels of superoxide dismutase(SOD)and malondialdehyde(MDA)in spinal cord tissue were detected.Results Compared with the group S,MWT and TWL were decreased in the group C at T2-5,the expression levels of LC3 Ⅱ,Beclin-1 and p62 were increased,SOD activity was decreased,and MDA content was increased at T5(P＜0.05).Compared with the group C,MWT and TWL were increased in the group H at T2-5,LC3 Ⅱ and Beclin-1 protein expression levels were increased,p62 protein expression levels were decreased,SOD activity was increased,and MDA content was decreased at T5(P＜0.05).MWT and TWL were decreased in the group M at T2-5,LC3 Ⅱ and Beclin-1 protein expression levels were decreased,p62 protein expression levels were increased,SOD activity was decreased,and MDA content was increased at T5(P＜0.05).Compared with the group M,MWT and TWL were increased in the group HM at T2-5,LC3 Ⅱ and Beclin-1 protein expression levels were increased,p62 protein expression levels were decreased,SOD activity was increased,and MDA content was decreased at T5(P＜0.05).Conclusion Hydrogen-rich saline can alleviate neuropathic pain and inhibit oxidative stress in spinal cord in rats,and the mechanism may be related to the increase of autophagy.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.

Objective To evaluate the effectiveness of filter membranes made from different materials in monitoring the health status of rodents in barrier environment facilities by investigating their microbial capture performance.Methods Pasteurella pneumotropica(Pp)and Staphylococcus aureus(Sa)were used as representative strains to simulate the process of microbial capture by filter membranes under laboratory conditions.The microbial capture effectiveness of five self-selected filter membranes(M1,M2,M3,M4,and M5)with adsorption and breathability properties and a commercial filter membrane(T1)were comprehensively evaluated based on captured dust mass,minimum detection limit,and differences in Ct values obtained through fluorescence quantitative PCR detection.The best-performing self-selected filter membrane was placed in the ventilation ducts of cage racks within the barrier facility,with sentinel mice in corresponding cage racks as the control group.Staphylococcus epidermidis and Escherichia coli were used as indicator bacteria to calculate the positive detection rate and coincidence rate,thereby exploring the feasibility of using microbial capture filter membranes to monitor the health status of experimental animals in barrier facilities.Results In terms of the captured dust mass,the self-selected filter membrane M3(non-woven filter membrane with a diameter of 0.1 μm);showed a capture effectiveness second only to T1,with a capture mass of 0.126 g.For Sa,all filter membranes except M4 had a minimum detection limit of 102 CFU/g.For Pp,the minimum detection limit for all filter membranes was 102 CFU/g.However,the Ct value of the quantitative fluorescence PCR amplification results for M3 was significantly lower than that of other materials,indicating that M3 had the best capture performance among the five self-selected materials.In the filter detection verification experiment,the positive detection rate of Staphylococcus epidermidis in sentinel mouse feces and M3 was 50.00％(6/12)and 58.33％(7/12),respectively,with a coincidence rate of 92％.The positive detection rate of Escherichia coli in both sentinel mouse feces and M3 was 50.00％(6/12),with a coincidence rate of 100％.Conclusion Among the 5 self-selected filter membranes,M3 exhibits the best capturing performance.Within the barrier environment facilities,M3 outperforms sentinel mice in monitoring Staphylococcus epidermidis.Therefore,non-woven filter membrane with a diameter of 0.1 μm;can be used as the material for microbial capture filter membranes,providing valuable insights for the selection and application of microbial capture filter membranes used in PCR monitoring of cage exhaust air dust.

To compare the differences in clinical features and treatment choices between peripheral spondyloarthritis(pSpA) and axial spondyloarthritis(axSpA), and better understand the clinical characteristics and medication needs of pSpA.

Objective:To investigate the effects of customized dental-bone supported osteotomy guide plate in bilateral sagittal split osteotomy.Methods:24 patients(48 sides)with maxillofacial deformity underwent BSSO were included.The maxillofacial region of all patients was scanned by CT,the plaster dental models were scanned using laser surface scanner,and the 3D models were established.The osteotomy guide plates of the inner horizontal and anterior sagittal bone incision of mandible ramus were manufactured by digital technology.All splits underwent operation with(27 side)and without(21 sides)the osteotomy guide plate respectively by the same doc-tor,and the time for the inner horizontal and anterior sagittal bone incision of mandible ramus was recorded.Postoperative CT scan was performed to evaluate the surgical effects according to the lingual split scale(LSS)classification.Results:The wound in all patients healed well and no serious complication was observed.The time for the inner horizontal and anterior sagittal bone incision of mandible ramus in plate group and no plate group was(125.67±2.23)s and(141.15±3.69)s respectively(P＜0.05).The probability of mandi-ble splitting according to Hunsuck standard osteotomy line increased from 42.86％to 66.67％,and the probability of osteotomy line passing through mandibular nerve canal decreased from 33.33％to 7.41％,by using osteotomy guide plate.In addition,LSS4 type of osteotomy line was avoided by using osteotomy guide plates.Data analysis showed that the split pattern of sagittal split osteotomy of the mandibular ramus was influenced by the application of osteotomy guide plates(P＜0.05).Conclusion:The customized dental-bone supported osteotomy guide plate is effective in the completion of the operation and reducing time consuming and surgical complication in BSSO.