Objective To explore the safety of Yttrium-90 resin microsphere selective internal radiation therapy (⁹⁰Y-SIRT) on malignant liver tumors. Methods A retrospective analysis was conducted on 64 patients with malignant liver tumors who underwent ⁹⁰Y-SIRT from February 2023 to November 2024 at Weifang People’s Hospital. The clinical characteristics of the patients and the occurrence of adverse reactions after treatment were analyzed to assess the safety of ⁹⁰Y-SIRT. Results Among the 64 patients, there were 52 males (81.25%) and 12 females (18.75%); the average age was (56.29±11.08) years. Seven patients (10.94%) had tumors with maximum diameter of less than 5 cm, 38 patients (59.38%) had tumors with maximum diameter of 5-10 cm, and 19 patients (29.68%) had tumors with maximum diameter of greater than 10 cm. There were 47 cases (73.44%) of solitary lesions and 17 cases (26.56%) of multiple lesions; 53 cases (82.81%) were primary liver cancers and 11 cases (17.19%) were metastatic liver cancers. Of the 64 patients, 63 successfully completed the Technetium-99m macroaggregated albumin (^99mTc-MAA) perfusion test and received the ⁹⁰Y-SIRT; one patient received ⁹⁰Y-SIRT after the second ^99mTc-MAA perfusion test due to a work error. The most common adverse reactions included grade 1 alanine aminotransferase (ALT) elevation in 26 cases (40.62%) and grade 2 in 2 cases (9.37%), grade 1 aspartate aminotransferase (AST) elevation in 27 cases (42.18%) and grade 2 in 7 cases (10.93%); grade 1 nausea in 17 cases (26.56%) and grade 2 in 6 cases (9.37%); grade 1 abdominal pain in 12 cases (18.75%), grade 2 in 5 cases (7.81%), and grade 3 in 1 case (1.56%); grade 1 vomiting in 11 cases (17.18%), grade 2 in 5 cases (7.81%), and grade 3 in 1 case (1.56%). Conclusion The adverse reactions of ⁹⁰Y-SIRT for treating malignant liver tumors are mild, indicating good safety.

Objective: To investigate the association between monocyte to high-density lipoprotein cholesterol ratio (MHR) and periodontitis and to provide new epidemiologic evidence on the factors affecting periodontitis. Methods: Data on MHR, periodontitis, and other covariates were selected from the NHANES(National Health and Nutrition Examination) database for 3 cycles of subjects in 2009-2010, 2011-2012, and 2013-2014, and a total of 8 456 study subjects were included. The study participants were grouped according to the prevalence of periodontitis (presence or absence), and three regression models (unadjusted covariates, partially adjusted covariates, and fully adjusted covariates) were constructed to analyze the relationship between MHR and periodontitis by using a weighted logistic regression method with stepwise adjustment for confounders. MHR was divided into four groups from Q1 to Q4 according to quartiles from small to large for weighted trend analysis, and the nonlinear relationship between MHR (continuous) and periodontitis was analyzed using a restricted cubic spline with subgroup analysis and sensitivity analysis. Results: All three logistic regression models showed a positive association between MHR and periodontitis (OR = 2.92, 95%CI: 2.14-3.99, P<0.001 (not adjusted); OR = 1.97, 95%CI: 1.39-2.78, P<0.001 (partially adjusted); OR = 1.62, 95%CI: 1.10-2.39, P = 0.017 (fully adjusted)). Trend analysis showed a significantly higher risk of developing periodontitis in the Q4 group compared with the Q1 group in both single (OR = 1.92, 95% CI: 1.58-2.33, P<0.001) and multifactorial analyses (OR = 1.30, 95% CI: 1.03-1.64, P = 0.029). Restricted cubic spline results did not support a nonlinear relationship between MHR and periodontitis (P for nonlinear>0.05), subgroup analysis showed no significant interaction between the covariates and MHR (P>0.05), and sensitivity analysis also showed a positive correlation between MHR and periodontitis (OR = 1.67, 95%CI: 1.31-2.14, P<0.001). Conclusion MHR is positively associated with the risk of developing periodontitis.

Objective: To investigate the prevalence and influencing factors of menopausal syndrome among postmenopausal women in Pan'an County, Zhejiang Province, so as to provide the basis for guiding the health management of postmenopausal women. Methods: From May 2023 to April 2024, the postmenopausal women aged 40 to 69 years in Pan'an County were selected using the random cluster sampling method. Demographic information, lifestyle and prevalence of gynecological diseases were collected through questionnaire surveys. The prevalence of menopausal syndrome was assessed by modified Kupperman Score Scale. Factors affecting menopausal syndrome were analyzed by a multivariable logistic regression model. Results: A total of 816 postmenopausal women were surveyed, with an mean age of (57.63±2.92) years and a mean natural menopause age of (49.85±2.13) years. There were 574 cases with menopausal syndrome, with a prevalence of 70.34%. Flashes and sweating, insomnia and irritability were common symptoms, accounting for 62.87%, 47.43% and 41.18%, respectively. Multivariable logistic regression analysis showed that monthly personal income of ≤5 000 yuan (<3 000 yuan, OR=3.124, 95%CI: 1.829-5.335; 3 000-5 000 yuan, OR=2.399, 95%CI: 1.370-4.201) and having gynecological diseases (OR=1.970, 95%CI: 1.292-3.004) were associated with a higher risk of menopausal syndrome, while average (OR=0.141, 95%CI: 0.072-0.276) or sufficient sleep quality (OR=0.095, 95%CI: 0.049-0.185) were associated with a lower risk of menopausal syndrome. Conclusion The prevalence of menopausal syndrome among postmenopausal women in Pan'an County is relatively high, and is mainly influenced by personal economic status, sleep quality and the presence of gynecological diseases.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the optimal construction method and the biological basis for establishing a mouse model of ischemic heart disease（IHD） with Qi and Yin deficiency syndrome by intraperitoneal injection of isoproterenol（ISO）. MethodsA total of 144 male C57BL/6J mice were randomly assigned into three normal groups and nine model groups according to body mass， with 12 mice in each group. The model groups 1， 4， and 7 were administered ISO via intraperitoneal injection at a dose of 5 mg·kg^-1·d^-1 for four consecutive days， the model groups 2， 5， and 8 received ISO at a dose of 10 mg·kg^-1·d^-1 for seven consecutive days， while the model groups 3， 6， and 9 were given ISO at a dose of 15 mg·kg^-1·d^-1 for 14 consecutive days. The normal groups were administered an equivalent volume of normal saline via intraperitoneal injection. After the modeling process， body mass， 24-hour food and water intake， grip strength， and spontaneous activity of the mice were measured. Cardiac function was assessed using echocardiography， the serum levels of norepinephrine（NE）， cyclic adenosine monophosphate（cAMP）， and cyclic guanosine monophosphate（cGMP） were determined via enzyme-linked immunosorbent assay（ELISA）. The content of adenosine triphosphate（ATP） in myocardial tissue was measured by biochemical analysis， while histopathological changes in myocardial tissue were observed via hematoxylin-eosin（HE） staining. An orthogonal experimental design was applied for intuitive analysis and variance analysis to screen the optimal modeling conditions of the mouse model of IHD with Qi and Yin deficiency syndrome. A data-dependent acquisition（DDA） proteomic technique was employed to quantitatively detect differentially expressed proteins in myocardial tissue between the optimal model group and the normal group. And bioinformatics analysis was conducted to explore the potential biological mechanisms underlying the Qi and Yin deficiency model of IHD. ResultsOrthogonal results showed that the injection cycle had a great influence on model establishment， and the optimal modeling condition was identified as intraperitoneal injection of ISO at 15 mg·kg^-1·d^-1 for 14 consecutive days. Under this condition， compared with the normal group， the model group demonstrated significant reductions in body mass， food intake， water intake， grip strength， total distance and average speed of exercise， ejection fraction（EF）， fractional shortening（FS）， serum levels of NE and cGMP， and myocardial ATP content（P<0.01）， while immobility time， cAMP level， and the cAMP/cGMP value were significantly increased（P<0.05， P<0.01）. HE staining results revealed that myocardial tissue in the model group had disordered cell arrangement， inflammatory cell infiltration， myocardial fiber rupture， and fibrous tissue proliferation. Proteomic analysis identified 141 differentially expressed proteins in the model group compared with the normal group， with 52 up-regulated and 89 down-regulated. Gene Ontology（GO） functional annotation and Kyoto Encyclopedia of Genes and Genomes（KEGG） pathway enrichment analysis indicated that the cellular components（CC） were mainly related to mitochondria and the inner mitochondrial membrane， the biological processes（BP） were associated with complement activation， platelet activation， and responses to metal ions， suggesting that the potential functional pathways involved the complement and coagulation cascade， as well as porphyrin metabolism. ConclusionContinuous intraperitoneal injection of ISO at a dose of 15 mg·kg^-1 for 14 days successfully establishes a mouse model of IHD with Qi and Yin deficiency syndrome， and the underlying mechanisms may be related to the regulation of iron ions by complement C3， C5 and Cp， and plays a role in the regulation through the BP of complement activation， platelet activation， and responses to metal ions， and the signaling pathways of the complement and coagulation cascade and porphyrin metabolism.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the optimal construction method and the biological basis for establishing a mouse model of ischemic heart disease（IHD） with Qi and Yin deficiency syndrome by intraperitoneal injection of isoproterenol（ISO）. MethodsA total of 144 male C57BL/6J mice were randomly assigned into three normal groups and nine model groups according to body mass， with 12 mice in each group. The model groups 1， 4， and 7 were administered ISO via intraperitoneal injection at a dose of 5 mg·kg^-1·d^-1 for four consecutive days， the model groups 2， 5， and 8 received ISO at a dose of 10 mg·kg^-1·d^-1 for seven consecutive days， while the model groups 3， 6， and 9 were given ISO at a dose of 15 mg·kg^-1·d^-1 for 14 consecutive days. The normal groups were administered an equivalent volume of normal saline via intraperitoneal injection. After the modeling process， body mass， 24-hour food and water intake， grip strength， and spontaneous activity of the mice were measured. Cardiac function was assessed using echocardiography， the serum levels of norepinephrine（NE）， cyclic adenosine monophosphate（cAMP）， and cyclic guanosine monophosphate（cGMP） were determined via enzyme-linked immunosorbent assay（ELISA）. The content of adenosine triphosphate（ATP） in myocardial tissue was measured by biochemical analysis， while histopathological changes in myocardial tissue were observed via hematoxylin-eosin（HE） staining. An orthogonal experimental design was applied for intuitive analysis and variance analysis to screen the optimal modeling conditions of the mouse model of IHD with Qi and Yin deficiency syndrome. A data-dependent acquisition（DDA） proteomic technique was employed to quantitatively detect differentially expressed proteins in myocardial tissue between the optimal model group and the normal group. And bioinformatics analysis was conducted to explore the potential biological mechanisms underlying the Qi and Yin deficiency model of IHD. ResultsOrthogonal results showed that the injection cycle had a great influence on model establishment， and the optimal modeling condition was identified as intraperitoneal injection of ISO at 15 mg·kg^-1·d^-1 for 14 consecutive days. Under this condition， compared with the normal group， the model group demonstrated significant reductions in body mass， food intake， water intake， grip strength， total distance and average speed of exercise， ejection fraction（EF）， fractional shortening（FS）， serum levels of NE and cGMP， and myocardial ATP content（P<0.01）， while immobility time， cAMP level， and the cAMP/cGMP value were significantly increased（P<0.05， P<0.01）. HE staining results revealed that myocardial tissue in the model group had disordered cell arrangement， inflammatory cell infiltration， myocardial fiber rupture， and fibrous tissue proliferation. Proteomic analysis identified 141 differentially expressed proteins in the model group compared with the normal group， with 52 up-regulated and 89 down-regulated. Gene Ontology（GO） functional annotation and Kyoto Encyclopedia of Genes and Genomes（KEGG） pathway enrichment analysis indicated that the cellular components（CC） were mainly related to mitochondria and the inner mitochondrial membrane， the biological processes（BP） were associated with complement activation， platelet activation， and responses to metal ions， suggesting that the potential functional pathways involved the complement and coagulation cascade， as well as porphyrin metabolism. ConclusionContinuous intraperitoneal injection of ISO at a dose of 15 mg·kg^-1 for 14 days successfully establishes a mouse model of IHD with Qi and Yin deficiency syndrome， and the underlying mechanisms may be related to the regulation of iron ions by complement C3， C5 and Cp， and plays a role in the regulation through the BP of complement activation， platelet activation， and responses to metal ions， and the signaling pathways of the complement and coagulation cascade and porphyrin metabolism.

Objective: To evaluate the application of blood conservation measures in obstetric patients with different red blood cell transfusion volumes and to assess the impact of different transfusion volumes on postpartum outcomes. Methods: A retrospective investigation was conducted on 448 obstetric patients who received blood transfusions at the Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine from January 2016 to December 2022. Patients were divided into four groups (1-2 units group, 3-4 units group, 5-6 units group, and >6 units group) based on the volumes of red blood cells (RBCs) transfused during and within 7 days after delivery. The maternal physiological indicators, pre- and postpartum laboratory test indicators, obstetric complications, application of blood conservation measures, use of blood products, and postpartum outcomes were reviewed. The clinical characteristics, application of blood conservation measures, and their impact on postpartum outcomes were compared among different transfusion groups. Results: There were statistically significant differences in the multivariate logistic analysis of history of previous cesarean section (OR=1.781), eclampsia/pre-eclampsia/(OR=1.972) and postpartum blood loss>1 000 mL（OR=1.699）(P<0.05) among different transfusion groups. In terms of blood conservation measures, the more RBCs transfused, the higher the rate of mothers receiving blood conservation measures such as balloon occlusion, arterial ligation, autologous blood transfusion with a cell saver, and hysterectomy. With the increase in the volume of RBCs transfusion, the demand for fresh frozen plasma（FFP）, cryoprecipitate, and platelet transfusions also increased. The hospitalization days for the four groups of parturients were 6.0 (4.0-9.0), 7.5 (5.0-14.8), 7.0 (4.5-13.0) and 11.0 (9.0-20.5), respectively (P<0.05) and the rates of ICU transfer were 2.0% (5/250), 9.4% (12/128),18.2% (6/33) and 51.4% (19/37), respectively (P<0.05). Both increased significantly with the increase in the volume of RBCs transfusion, and the differences between groups were statistically significant. Conclusion: Parturients who received higher volume of RBCs had multiple risks factors for bleeding before childbirth, had higher postpartum blood loss, and had a higher rate of application of various blood conservation measures. In addition, an increase in the volume of RBCs transfusion may have adverse effects on postpartum recovery.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Based on ultra-performance liquid chromatography-quadrupole-electrostatic field Orbitrap high-resolution mass spectrometry(UPLC-Q-Orbitrap HRMS) technology and molecular docking, the bitter-tasting substances(hereafter referred to as "bitter substances") in Cistanche deserticola extract were investigated, and the bitter taste and efficacy relationship was explored to lay the foundation for future research on de-bittering and taste correction. Firstly, UPLC-Q-Orbitrap HRMS was used for the qualitative analysis of the constituents of C. deserticola, and 69 chemical components were identified. These chemical components were then subjected to molecular docking with the bitter taste receptor, leading to the screening of 20 bitter substances, including 6 phenylethanol glycosides, 5 flavonoids, 3 phenolic acids, 2 cycloalkenyl ether terpenes, 2 alkaloids, and 2 other components. Nine batches of fresh C. deserticola samples were collected from the same origin but harvested at different months. These samples were divided into groups based on harvest month and plant part. The bitterness was quantified using an electronic tongue, and the content of six potential bitter-active compounds(pineconotyloside, trichothecene glycoside, tubulin A, iso-trichothecene glycoside, jinshihuaoside, and jingnipinoside) was determined by high-performance liquid chromatography(HPLC). The total content of phenylethanol glycosides, polysaccharides, alkaloids, flavonoids, and phenolic acids was determined using UV-visible spectrophotometry. Chemometric analyses were then conducted, including Pearson's correlation analysis, gray correlation analysis, and orthogonal partial least squares discriminant analysis(OPLS-DA), to identify the bitter components in C. deserticola. The results were consistent with the molecular docking findings, and the two methods mutually supported each other. Finally, network pharmacological predictions and analyses were performed to explore the relationship between the targets of bitter substances and their efficacy. The results indicated that key targets of the bitter substances included EGFR, PIK3CB, and PTK2. These substances may exert their bitter effects by acting on relevant disease targets, confirming that the bitter substances in C. deserticola are the material basis of its bitter taste efficacy. In conclusion, this study suggests that the phenylethanol glycosides, primarily pineconotyloside, mauritiana glycoside, and gibberellin, are the material basis for the "bitter taste" of C. deserticola. The molecular docking technique plays a guiding role in the screening of bitter substances in traditional Chinese medicine(TCM). The bitter substances in C. deserticola not only contribute to its bitter taste but also support the concept of the "taste-efficacy" relationship in TCM, providing valuable insights and references for future research in this area.
Molecular Docking Simulation ; Taste ; Chromatography, High Pressure Liquid ; Cistanche/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Humans ; Mass Spectrometry