OBJECTIVE To prepare reactive oxygen species （ROS）-responsive methotrexate （MTX）-modified paclitaxel （PTX）/icariin （ICA） micelles （MTX-oxi-Ms@PTX/ICA）， and perform technology optimization and in vitro anti-tumor effect evaluation. METHODS Synergistic toxicity concentration range of PTX and ICA was screened by synergistic toxicity test. The micelles were prepared by thin film hydration method， and their technology was optimized by response surface methodology. The fundamental characteristics of the micelles prepared by the optimal technology were evaluated. The micelles’ cytotoxicity， targeting ability to renal carcinoma RENCA cells of mice， and their inhibitory effects on invasion and migration were assessed. RESULTS Results of synergistic toxicity experiments demonstrated that the strongest synergistic effect occurred when PTX concentrations ranged from 2.5 to 10 μmol/L and ICA concentrations ranged from 5 to 15 μmol/L. The optimal technology of MTX-oxi-Ms@PTX/ ICA was determined to include 80 mg Soluplus®， Soluplus® and TPGS1000 mass ratio of 4∶1 （mg/mg）， 2 mg DSPE-PEG2000-TK- PEG5000， 2 mg DSPE-PEG2000-MTX， 1 mg PTX， and 1.5 mg ICA， with a hydration temperature of 35 ℃ and a formulation volume of 5 mL. Under the optimal conditions， average encapsulation efficiency of PTX and ICA in 3 batches of MTX-oxi- Ms@PTX/ICA reached 92.75%， the critical micelle concentration （CMC） was 0.007 9 mg/mL， the particle size was （62.09±1.68） nm， the polydispersity index （PDI） was 0.046±0.032， and the Zeta potential was （－2.47±0.15） mV. Within 30 days of placement， there was no significant change E-mail：yingqiang_1126@163.com in particle size and polydispersity index of micelle. In vitro release experiments showed that MTX-oxi-Ms@PTX/ICA released drugs more rapidly in oxidative environments. The half maximal inhibitory concentration of MTX-oxi-Ms@PTX/ICA against RENCA cells was （5.170±0.036） μmol/L. In vitro cellular uptake experiments indicated that compared with unmodified micelles， MTX modified micelles had stronger targeting effects on cancer cells， and also significantly enhanced the inhibitory ability of invasion and migration of RENCA cells （P＜0.05）. CONCLUSIONS MTX-oxi-Ms@PTX/ICA micelles are successfully prepared， which exhibit high encapsulation efficiency， low critical micelle concentration， and good stability. These micelles demonstrate significant cytotoxicity against RENCA cells and effectively inhibit cancer cell invasion and migration.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Background Manganese is an essential trace element for the human body and maintains normal development of many organs including the brain. However, long-term exposure to a high manganese environment or excessive manganese intake will lead to manganese poisoning and result in neurological diseases, and currently no effective treatment plan is available. Objective To develop an animal model for subchronic manganese exposure and assess the impact of Dendrobium nobile Lindl. alkaloids (DNLA) on manganese associated behavioral and hippocampal effects in rats. Methods Fifty male SPF SD rats were randomly allocated into a control group (0.9% normal saline by intraperitoneal injection), two experimental groups [7.5 mg·kg⁻¹ (low) or 15 mg·kg⁻¹ (high) of MnCl₂·4H₂O by intraperitoneal injection], and two DNLA antagonistic groups [15 mg·kg⁻¹ MnCl₂·4H₂O by intraperitoneal injection then either 20 mg·kg⁻¹ (low) or 40 mg·kg⁻¹ (high) DNLA by oral administration]. All groups of rats were adminaistered 5 d per wek, once a day, for consecutive 13 weeks. Following modeling, neurobehavioral assessments were conducted using open field, Morris water maze, and Y maze. Inductively coupled plasma mass spectrometry (ICP-MS) was utilized to measure manganese levels in the blood and brain tissues of the rats, and hematoxylin-eosin (HE) staining was employed to examine neuronal morphological changes in the hippocampal tissues of the rats. Results The neurobehavioral tests revealed that the manganese-exposed rats exhibited decreased total movement distance, prolonged central zone dwelling time, and reduced motor activity in the open field test, indicating tendencies toward depression and anxiety (P<0.05). In the Y-maze test, the mean exploration distance in the novel arm, the number of entries into the novel arm, and the time spent in the novel arm of the managanses-exposed rats were all reduced, while the latency period increased, suggesting impaired spatial exploration and learning-memory functions (P<0.05). In the Morris water maze navigation test, the escape latency was significantly longer in the manganese-exposed rats compared to the control group, and the number of platform crossings decreased in the spatial probe test, indicating a significant decline in spatial learning and memory (P<0.05). The ICP-MS analysis showed elevated manganese concentrations in the blood and hippocampus of the exposed rats (P<0.05), and the histopathological observation revealed hippocampal damage. Following the DNLA intervention, the manganese-exposed rats showed increased total movement distance and reduced central zone dwelling time in the open field test (P<0.05). In the Y-maze test, the mean exploration distance in the novel arm, the number of entries into the novel arm, and the time spent in the novel arm increased, while the latency period decreased, suggesting alleviation of anxiety and improved exploratory behavior (P<0.05). In the Morris water maze test, the escape latency gradually shortened, and both the number of platform crossings and the percentage of time spent in the target quadrant increased, indicating improved spatial learning and memory (P<0.05). Additionally, the manganese levels in the blood and hippocampus decreased (P<0.05), and the hippocampal pathological changes were partially restored. Conclusion DNLA demonstrates the ability to counteract multiple neurotoxic effects following the elevation of manganese levels in the blood and hippocampal tissues of rats induced by subchronic manganese exposure. Specifically, DNLA is shown to ameliorate the behavioral alterations observed in rats after manganese exposure, and mitigate the hippocampal damage in manganese-exposed rats.

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

ObjectiveTo conduct a systematic review of the effect of active music therapy on cognitive function for older adults with cognitive impairment based on International Classification of Diseases, the 11th Revision (ICD-11), and International Classification of Functioning, Disability and Health (ICF). MethodsA PICO framework was constructed. Thematic keyword searches were conducted in databases including PubMed, Web of Science, Embase, CNKI, VIP, and Wanfang data, for literature on the effect of active music therapy on cognitive function for older adults with cognitive impairment, published up to November 5th, 2023. Information on authors, countries, publication date, sample characteristics, study designs, intervention methods, measurement tools and outcomes were extracted. The methodological quality of the researches was evaluated using the Physiotherapy Evidence Database (PEDro) scale. ResultsEight researches from six countries were included, which were all randomized controlled trials involving 356 older adults with mild cognitive impairment and dementia. The articles were published from 2014 to 2020, with an average of 7.4 of the PEDro scale. Active music therapy was used by singing and playing instruments. Interventions took place in hospitals, nursing homes, and health centers. The intervention duration ranged from mostly 30 to 60 minutes a time, with a few 120 minutes a time. Interventions were implemented mostly one to three times a week, lasting from eight to twelve weeks. Health outcomes focused on cognitive function, including overall cognitive function, executive function, attention function and memory function. ConclusionA theoretical framework for the benefits of active music therapy on the cognitive function for older adults with cognitive impairment has been constructed based on ICD-11 and ICF. Active music therapy can improve overall cognitive function, executive function, attention function and memory function for older adults with cognitive impairment.

Diabetes is a common chronic non-infectious disease. Diabetic patients not only suffer from metabolic disorders, but are also prone to immune deficiencies and are at a higher risk of being infected with human papillomavirus (HPV). Many studies at home and abroad have shown that the HPV infection rate of patients with diabetes is higher than that of non-diabetic patients. Patients with diabetes can benefit from HPV vaccination, and the tolerance is good. HPV vaccination is recommended for diabetic patients. This article reviews the research on diabetes, HPV infection, and HPV vaccine, which will provide references for HPV vaccination in diabetic patients.

Objective: To investigate the prevalence and associated factors of depressive symptoms among middle and high school students in Zhejiang Province, so as to provide scientific basis for the implementation of depressive intervention. Methods: Based on the health status and associated factors of middle and high school students in the project "Monitoring of Common Diseases and Health Influencing Factors of Students" during 2018 to 2021, a total of 73 309 students including middle school, ordinary high school and vocational high school surveyed in 11 cities of Zhejiang Province were selected by multi stage stratified cluster random sampling method. From 2018 to 2021, there were 6 008, 21 917, 23 712 and 21 672 students, respectively. The Chi square test and Logistic regression model were used to analyze the influencing factors of depressive symptoms in middle and high school students. Results: From 2018 to 2021, depressive symptoms detection rate of middle school students was 14.8%, with higher rate in girls (17.1%) than in boys (12.7%), higher rate in high school (17.1% in ordinary high school, 17.6% in vocational high school) than middle school (12.5%)( χ 2=278.77, 327.22, P <0.05). Univariate analysis showed that there were statistically significant differences in depressive symptoms detection rate among middle school students with different years (2018: 16.7%，2019: 17.9% , 2020: 13.1%, 2021: 13.0%), residence (yes: 16.3%, no:13.5%), body mass index classification (not overweight or obesity: 14.8%, overweight: 14.2%, Obesity: 15.7%), weekly exercise days (0-2 d: 17.1%, 3-5 d: 12.5%, 6-7 d: 13.1%) and bullying (yes: 35.5%, no: 10.7%) ( χ 2=293.40, 118.35, 7.83, 287.24, 4 978.84, P <0.05). Multivariate Logistic regression analysis showed that female students, ordinary high schools, vocational high schools, obesity, school bullying were positively correlated with depression ( OR =1.65, 1.70, 1.60, 1.12, 5.21), exercise 3 to 5 days per week, exercise 6 to 7 days per week were negatively correlated with depression ( OR=0.77, 0.81, P <0.01). Conclusions Depressive symptoms among middle and high school students in Zhejiang Province are prominent. Strengthening mental health education for students and providing attention and support from families, schools, and society are essential steps to reduce the occurrence of depressive symptoms among these students.