OBJECTIVE To establish the fingerprint of Pinghuo tea standard decoction and a method for determination of multi-component to clarify the transfer relationship of quantities and quality from pieces and standard decoction. METHODS Fifteen batches of Pinghuo tea standard decoction were prepared and the extract rate was determined； the fingerprint of the preparation was established by using high-performance liquid chromatography（HPLC）； the similarity evaluation and the determination of common peaks were performed， and chemometric analysis was performed； the same method was used to determine the content of indicator components and the transfer rate was calculated. The chromatographic column was Venusil C18 column with mobile phase consisted of acetonitrile-0.1% phosphoric acid solution （gradient elution）； the column temperature was 30 ℃， and the detection wavelengths were 238 nm （0-37 min， 85-102 min） and 330 nm （37-85 min） at a flow rate of 1.0 mL/min with an injection volume of 10 μL. RESULTS The similarity of HPLC fingerprints for 15 batches of Pinghuo tea standard decoction was not lower than 0.968. A total of 24 common peaks were calibrated and 9 peaks were recognized， which were as follows neochlorogenic acid （peak 3）， chlorogenic acid （peak 6）， geniposide （peak 9）， glycyrrhizin （peak 10）， galuteolin （peak 11）， isochlorogenic acid A （peak 14）， luteolin （peak 21）， kaempferol （peak 23） and glycyrrhizic acid （peak 24）. Cluster analysis， principal component analysis and orthogonal partial least squares discriminant analysis showed consistent results， all of which could classify the 15 batches of samples into three categories. The linear range of indicator components in 15 batches of Pinghuo tea standard decoction， such as geniposide， luteolin， isochlorogenic acid A， glycyrrhizin， and glycyrrhizic acid， were 0.020 580-0.411 600， 0.001 617-0.080 850， 0.006 076-0.607 600， 0.005 125-0.071 740， and 0.017 288-0.432 200 mg/mL， respectively； RSDs of precision， repeatability， stability and recovery rate tests were all not higher than 4% （n＝6）. The mass fractions ranged 3.227 9-10.002 2， 0.297 4-0.554 6， 3.350 1-6.159 6， 0.720 6-1.073 3， 2.003 1-3.030 1 mg/g； transfer rates from the pieces and standard decoction were 19.762 8%-35.840 5%， 12.123 3%-21.254 0%， 46.097 2%-82.869 4%， 58.708 8%-91.629 6%， 39.114 3%-63.710 6%. The transfer rates of the extract from 15 batches of Pinghuo tea standard decoction ranged from 61.15%-84.68%. CONCLUSIONS Established HPLC fingerprint and content determination methods in this study are simple and accurate， which can provide reference for the quantitative value transfer study， quality control， clinical application and the development of subsequent formulations of Pinghuo tea standard decoction.

Objective: To investigate the situation and influencing factors of school bullying experienced by primary and middle school students, so as to provide the basis for formulating school bullying intervention measures and promoting students' physical and mental health development. Methods: All the counties (cities, districts) in Zhejiang Province were stratified to urban and suburban areas, primary, junior high and senior high school students were selected using a stratified cluster sampling method. Basic information, lifestyle and school bullying were collected through questionnaire surveys. Factors affecting school bullying experienced by primary and middle school students were analyzed using a multivariable logistic regression model. Results: Totally 137 846 valid questionnaires were recovered, with an effective recovery rate of 97.17%. There were 72 526 males (52.61%) and 65 320 females (47.39%). There were 47 561 primary school students (34.50%), 47 701 junior high school students (34.61%) and 42 584 senior high school students (30.89%). A total of 3 987 students suffered from school bullying, accounting for 2.89%. The proportions of being maliciously teased, being intentionally excluded from group activities/isolated, being teased about physical defects or appearance, being hit/kicked/pushed/shoved/locked in a room, being threatened, and being extorted for money were 2.04%, 1.18%, 1.11%, 0.86%, 0.84% and 0.83%, respectively. Multivariable logistic regression analysis showed that the students who were males (OR=1.122, 95%CI: 1.048-1.202), lived in suburban areas (OR=1.322, 95%CI: 1.233-1.418), lived in areas with medium (OR=1.086, 95%CI: 1.006-1.173) or underdeveloped (OR=1.298, 95%CI: 1.191-1.415) economic level, had higher academic levels (junior high school, OR=1.380, 95%CI: 1.270-1.499; senior high school, OR=1.210, 95%CI: 1.083-1.351), lived on campus (OR=1.489, 95%CI: 1.372-1.616), engaged in fights (OR=6.029, 95%CI: 5.585-6.509), attempted to smoke (OR=1.320, 95%CI: 1.128-1.545), drank (OR=1.735, 95%CI: 1.575-1.912), were scolded and beaten by parents (OR=1.972, 95%CI: 1.822-2.135) and were obese (OR=1.240, 95%CI: 1.132-1.360) were more likely to experience school bullying. Conclusion The harm of school bullying to the physical and mental health of primary and middle school students should be taken seriously, and active policy measures should be adopted to strengthen intervention.

ObjectiveTo establish steroid-induced osteonecrosis of the femoral head （SANFH） cell model by using dexamethasone （DEX）-induced bone marrow mesenchymal stem cells （BMSCs） and demonstrate that Gushing Granules （GSNs） exert an improving effect by activating the phosphatidylinositol-3-kinase/protein kinase B/B-lymphoma-2 gene related promoter （PI3K/Akt/Bad） signalling pathway. MethodsFirstly， SD rats were orally administered with drugs at a dose of 0.9 g·kg^-1 to prepare GSN-containing serum， and CCK-8 screening was used to determine the optimal dosage and duration of action. Then， BMSCs were cultured and treated with 1×10^-6 mol·L^-1 DEX， 10% GSN-containing serum， and inhibitor LY294002 of PI3K/Akt signalling pathway for 24 hours to model and group SANFH cells. Cell viability and proliferation were detected by using CCK-8 assay kit and EdU staining kit. Flow cytometry was used to detect cell apoptosis. An alkaline phosphatase （ALP） assay kit was employed to detect ALP expression. In order to detect the PI3K/Akt/Bad signalling pathway and protein and mRNA expression of apoptosis-related proteins such as apoptosis regulatory factors B-cell lymphoma-2 gene （Bcl-2）， and Bcl-2-associated X protein （Bax）， osteocalcin （OCN）， and Collagen Ⅰ， we used Western blot and Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR）. ResultsThe CCK-8 assay kit determined that the optimal dosage for GSN-containing serum is 10%， and the duration of action is 48 hours. After modelling and grouping the cells in each group， the detection results showed that the SANFH model group had significantly lower cell viability， cell proliferation， and ALP expression， as well as protein and mRNA expressions of PI3K， Akt， Bad， Bcl-2， OCN， and Collagen I compared to the blank group. The nucleic acid and protein levels of the Bax index and the cell apoptosis rate detected by flow cytometry significantly increased （P<0.05，P<0.01）. After treatment with GSN-containing serum， cell viability， cell proliferation， and ALP expression， as well as expressions of PI3K， Akt， Bad， Bcl-2， OCN， and Collagen Ⅰ nucleic acids and proteins were significantly increased， while the nucleic acid and protein levels of the Bax index and the cell apoptosis rate detected by flow cytometry significantly decreased（P<0.05，P<0.01）. Compared with the GSN drug-containing serum group， the simultaneous treatment with the inhibitor LY294002 and GSN drug-containing serum reversed the improvement effect of GSN. Specifically， the cell viability， cell proliferation， ALP expression， and the nucleic acid and protein levels of PI3K， Akt， Bad， Bcl-2， OCN， and Collagen Ⅰ were all significantly decreased， while the nucleic acid and protein levels of the Bax index and the cell apoptosis rate detected by flow cytometry were significantly increased （P<0.05， P<0.01）. ConclusionGSNs antagonize DEX-induced apoptosis of BMSCs by activating the PI3K/Akt/Bad signalling pathway， providing a scientific theoretical basis for the clinical treatment of SANFH with GSNs.

[Objective] To investigate the seroprevalence characteristics of hepatitis E virus (HEV) among blood donors with hepatitis B virus (HBV) infection, so as to provide data support for the monitoring, prevention and treatment of HEV. [Methods] From January to December 2022, 219 samples positive for hepatitis B surface antigen (HBsAg), 142 occult hepatitis B virus infection (OBI) samples (HBV group) and 873 samples tested negative (control group) were collected. 361 samples were further tested with viral load assay and serological testing for five serological markers (HBsAg, HBsAb, HBeAg, HBeAb and HBcAb), and the DNA load was measured using real time fluorescence quantitative PCR. Commercially available enzyme-linked immunosorbent assays (ELISA) were used for the detection of anti-HEV IgG, anti-HEV IgM and HEV antigen (Ag). The Chi-square test or Fisher's exact test was used to assess the differences in the reactivity rates of anti-HEV IgG and anti-HEV IgM among different blood donor populations and different variables. Multivariable logistic regression was used to examine potential risk factors associated with anti-HEV IgG seroprevalence. [Results] In the HBV group, HBsAg positive donors exhibited low expression of antigen. The HBV DNA load of OBI infected donors ranged from 1 to 131.43 IU/mL (median 11.24 IU/mL). The prevalence of anti-HEV IgG and IgM antibody in the HBV group were 34.63% and 1.11%, respectively. Among them, the prevalence of anti-HEV IgG and anti-HEV IgM in the HBV group was 34.63% and 0, respectively (P<0.05), while in the OBI donors, they were 41.55% and 2.82%, respectively. In the normal donors, the reactivity rates for anti-HEV IgG and anti-HEV IgM were 18.67% and 1.49%, respectively. Statistical analysis showed that there was a difference in the reactivity rate of anti-HEV IgG between the HBV-infected donors and the normal donors (34.63% vs 18.67%, P<0.05), but no difference in the reactivity rate of anti-HEV IgM (1.11% vs 1.49%, P>0.05). No HEV Ag was detected in either group of blood donors. Multivariate logistic regression analysis indicated that age was an independent risk factor for anti-HEV IgG reactivity in both groups of blood donors. [Conclusion] The reactivity rate of anti-HEV IgG among HBV-infected blood donors was significantly higher than that in the normal donors in Wuhan, with age being an independent risk factor. Therefore, for HBV-infected donors, it is essential to strengthen and prioritize the prevention and treatment of HEV to reduce the spread of HEV.

BACKGROUND:Gradient artificial bone repair scaffolds can mimic unique anatomical features in musculoskeletal tissues,showing great potential for repairing injured musculoskeletal tissues. OBJECTIVE:To review the latest research advances in gradient artificial bone repair scaffolds for tissue engineering in the musculoskeletal system and describe their advantages and fabrication strategies. METHODS:The first author of the article searched the Web of Science and PubMed databases for articles published from 2000 to 2023 with search terms"gradient,bone regeneration,scaffold".Finally,76 papers were analyzed and summarized after the screening. RESULTS AND CONCLUSION:(1)As an important means of efficient and high-quality repair of skeletal system tissues,gradient artificial bone repair scaffolds are currently designed bionically for the natural gradient characteristics of bone tissue,bone-cartilage,and tendon-bone tissue.These scaffolds can mimic the extracellular matrix of native tissues to a certain extent in terms of structure and composition,thus promoting cell adhesion,migration,proliferation,differentiation,and regenerative recovery of damaged tissues to their native state.(2)Advanced manufacturing technology provides more possibilities for gradient artificial bone repair scaffold preparation:Gradient electrospun fiber scaffolds constructed by spatially differentiated fiber arrangement and loading of biologically active substances have been developed;gradient 3D printed scaffolds fabricated by layered stacking,graded porosity,and bio-3D printing technology;gradient hydrogel scaffolds fabricated by in-situ layered injections,simple layer-by-layer stacking,and freeze-drying method;and in addition,there are also scaffolds made by other modalities or multi-method coupling.These scaffolds have demonstrated good biocompatibility in vitro experiments,were able to accelerate tissue regeneration in small animal tests,and were observed to have significantly improved histological structure.(3)The currently developed gradient artificial bone repair scaffolds have problems such as mismatch of gradient scales,unclear material-tissue interactions,and side effects caused by degradation products,which need to be further optimized by combining the strengths of related disciplines and clinical needs in the future.

Objective: Previous studies have discovered a correlation between cigarette smoking and cortical thickness and surface area, but the causal relationship remains unclear. The objective of this investigation is to scrutinize the causal association between them. Methods: To derive summary statistics from a genome-wide association study (GWAS) on cortical thickness, surface area, and four smoking behaviors: 1) age of initiation of regular smoking (AgeSmk); 2) smoking initiation (SmkInit); 3) smoking cessation (SmkCes); 4) cigarettes per day (CigDay). Linkage disequilibrium score regression (LDSC) was employed to examine genetic association analysis. Furthermore, for traits with significant genetic associations, Mendelian randomization (MR) analyses were conducted. Results: The LDSC analysis revealed nominal genetic correlations between AgeSmk and right precentral surface area, left caudal anterior cingulate surface area, left cuneus surface area, left inferior parietal surface area, and right caudal anterior cingulate thickness, as well as between CigDay and left caudal middle frontal surface area, between SmkCes and left entorhinal thickness, and between SmkInit and left rostral anterior cingulate surface area, right rostral anterior cingulate thickness, and right superior frontal thickness (rg=-0.36–0.29, p<0.05). MR analysis showed a unidirectional causal association between left caudal middle frontal surface area and CigDay (βIVW=0.056, pBonferroni=2×10-4). Conclusion Left caudal middle frontal surface area has the potential to serve as a significant predictor of smoking behavior.

Objective: This study aims to investigate the anatomical relationship among the nerve roots, intervertebral space, pedicles, and intradural rootlets of the cervical spine for improving operative outcomes and exploring neuroventral decompression approach in posterior endoscopic cervical discectomy (PECD). Methods: Cervical computed tomography myelography imaging data from January 2021 to May 2023 were collected, and the RadiAnt DICOM Viewer Software was employed to conduct multiplane reconstruction. The following parameters were recorded: width of nerve root (WN), nerve root-superior pedicle distance (NSPD), nerve root-inferior pedicle distance (NIPD), and the relationship between the intervertebral space and the nerve root (shoulder, anterior, and axillary). Additionally, the descending angles between the spinal cord and the ventral (VRA) and dorsal (DRA) rootlets were measured. Results: The WN showed a gradual increase from C4 to C7, with measurements notably larger in men compared to women. The NSPD decreased gradually from the C2–3 to the C5–6 levels. However, the NIPD showed an opposite level-related change, notably larger than the NSPD at the C4–5, C5–6, and C7–T1 levels. Furthermore, significant differences in NIPD were observed between different age groups and genders. The incidence of the anterior type exhibited a gradual decrease from the C2–3 to the C5–6 levels. Conversely, the axillary type exhibited an opposite level-related change. Additionally, the VRA and DRA decreased as the level descended, with measurements significantly larger in females. Conclusion A prediction of the positional relationship between the intervertebral space and the nerve root is essential for the direct neuroventral decompression in PECD to avoid damaging the neural structures. The axillary route of the nerve root offers a safer and more effective pathway for performing direct neuroventral decompression compared to the shoulder approach.

The standard of Pharmaceutical packaging materials is an important part of the Chinese Pharmacopoeia. This article focuses on working background, general idea, working process, main framework, and its role and significance of the pharmaceutical packaging materials standards system in the Chinese Pharmacopoeia 2025 Edition, which can contribute to accurately understand and utilize the standards in the Chinese Pharmacopoeia 2025 Edition.

Objective To introduce an innovative technique, the "balance-shaped sternal elevation device" and its application in the subxiphoid uniportal video-assisted thoracoscopic surgery (VATS) for anterior mediastinal masses resection. Methods Patients who underwent single-port thoracoscopic assisted anterior mediastinal tumor resection through the xiphoid process at the Department of Thoracic Surgery, West China Hospital, Sichuan University from May to June 2024 were included, and their clinical data were analyzed. Results A total of 7 patients were included, with 3 males and 4 females, aged 28-72 years. The diameter of the tumor was 1.9-17.0 cm. The operation time was 62-308 min, intraoperative blood loss was 5-100 mL, postoperative chest drainage tube retention time was 0-9 days, pain score on the 7th day after surgery was 0-2 points, and postoperative hospital stay was 3-12 days. All patients underwent successful and complete resection of the masses and thymus, with favorable postoperative recovery. Conclusion The "balance-shaped sternal elevation device" effectively expands the retrosternal space, providing surgeons with satisfactory surgical views and operating space. This technique significantly enhances the efficacy and safety of minimally invasive surgery for anterior mediastinal masses, reduces trauma and postoperative pain, and accelerates patient recovery, demonstrating important clinical significance and application value.

Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.