BACKGROUND:Zinc-based alloy medical implant materials have excellent mechanical properties,complete degradability and good biocompatibility,and are mainly used in orthopedic implants,cardiovascular stents,bile duct stents,tracheal stents,nerve catheters,etc. OBJECTIVE:To review the research progress of biodegradable zinc-based alloys in bone defect repair and prospect the promising research direction and achievements of zinc-based materials. METHODS:After searching PubMed,Web of Science,WanFang Data,and CNKI databases from the establishment of the database to June 2023,various relevant articles on biodegradable zinc-based alloys for bone implant material research were collected.The basic characteristics of biodegradable zinc based alloys were summarized,and the role of zinc-based alloys in promoting bone tissue repair was sorted and summarized.The current research hotspots and shortcomings were discussed. RESULTS AND CONCLUSION:(1)Zinc-based alloys have good biocompatibility.Using zinc-based alloys as the matrix material,with the help of scaffold structure construction technology and coating optimization process,the bone conductivity of zinc-based alloys will be effectively improved,and their degradation products will have efficient bone induction to regulate the gene expression of osteoblasts and osteoclasts,thereby promoting the repair and reconstruction of bone defects.(2)However,in the research on optimizing zinc-based alloys,the coating process is relatively insufficient,and additive loading technology is still lacking.(3)Zinc-based alloys have excellent mechanical and biological properties.Through special processes,their bone conductivity and osteoinductivity can be increased to effectively improve their ability to promote bone repair and reconstruction,and it is expected to further achieve the development of personalized transplant materials.Further research and development are needed to optimize the integration of coating and additive loading technologies into zinc-based alloys.

BACKGROUND:Buqi Huoxue Compounds have significant clinical efficacy in treating ischemic stroke with Qi deficiency and phlegm stasis;however,the exact mechanism of action is not clear. OBJECTIVE:To observe the effect of Buqi Huoxue Compounds on the expression of vascular endothelial growth factor,basic fibroblast growth factor,brain-derived neurotrophic factor and autophagy related protein Beclin1 and p62 in a rat model of cerebral ischemia/reperfusion. METHODS:Forty male Sprague-Dawley rats were randomly divided into sham operation group,model group,Buqi Huoxue Compounds group and autophagy inhibitor group,with 10 rats in each group.In the latter three groups,a rat model of cerebral ischemia/reperfusion injury was established.The Buqi Huoxue Compounds group was intragastrically given Buqi Huoxue Compounds(6.49 g/kg,administered three times a day)2 hours after reperfusion;the autophagy inhibitor group was intragastrically given Buqi Huoxue Compounds(6.49 g/kg,administered three times a day)2 hours after reperfusion and intraperitoneally given 3-methyladenine 2 hours before gavage and at days 1-3 of gavage.The sham operation group and model group were given equal amounts of saline by gavage for 7 consecutive days.Neurological function,cerebral infarct volume,brain tissue morphology and expression of vascular endothelial growth factor,basic fibroblast growth factor,brain-derived neurotrophic factor and autophagy-related proteins Beclin1 and p62 in the ischemic cortical region of rats were detected at 24 hours after the final administration. RESULTS AND CONCLUSION:Zea-Longa scoring results showed that the neurological function of rats was severely damaged after modeling and neurological deficit of rats in the Buqi Huoxue Compounds group was less than that in the model group and the autophagy inhibitor group(P＜0.05).TTC staining showed that cerebral infarct foci were observed in the model group,Buqi Huoxue Compounds group,and autophagy inhibitor group,and the cerebral infarct volume in the Buqi Huoxue Compounds group was lower than that in the model group and the autophagy inhibitor group(P＜0.05).The results of hematoxylin-eosin staining in ischemic brain tissues showed that there were large gaps between nerve cells in the model group and cell arrangement was not neat,and cytoplasmic agglutination and pyknosis were observed.Immunohistochemical staining results showed that vascular endothelial growth factor was mostly expressed in neuronal cells,glial cells and capillary endothelium;basic fibroblast growth factor and brain-derived neurotrophic factor were mostly expressed in neuronal cells and glial cells;and there was no significant difference in the expression of vascular endothelial growth factor,basic fibroblast growth factor,and brain-derived neurotrophic factor among the four groups(P＞0.05).The results of western blot assay showed that compared with the sham operation group,Beclin1 protein expression was decreased(P＜0.05)and p62 protein expression was elevated(P＜0.05)in the model group;compared with the model group,Beclin1 protein expression was increased(P＜0.05)and p62 protein expression was reduced(P＜0.05)in the Buqi Huoxue Compounds group;compared with the Buqi Huoxue Compounds group,Beclin1 protein expression was decreased(P＜0.05)and p62 protein expression was elevated(P＜0.05)in the autophagy inhibitor group.To conclude,Buqi Huoxue Compounds attenuate cerebral ischemia-reperfusion injury in rats by promoting autophagy.

BACKGROUND:Several observational studies have found a close relationship between thyroid function levels and sarcopenia,but the causal relationship between thyroid function levels and the onset of sarcopenia is not yet clear. OBJECTIVE:To investigate the causal relationship between thyroid function levels and sarcopenia using a two sample Mendelian randomization method. METHODS:A two sample Mendelian randomization analysis was conducted using genome-wide association study data on thyrotropin,free triiodothyronine,free tetraiodothyronine,subclinical hyperthyroidism,subclinical hypothyroidism,and four related phenotypes of sarcopenia-lefthand grip strength,right hand grip strength,limb lean mass,and gait speed.The inverse-variance weighted method,weighted median method,simple mode method,weighted median estimator method,and MR Egger regression method were used as analysis methods,while heterogeneity test,pleiotropy test,MR-PRESSO,leave-one-out method,funnel plot and other methods were used for sensitivity analysis. RESULTS AND CONCLUSION:Elevated levels of thyroid-stimulating hormone increased left-(β=0.02,SE=0.01,P=0.01)and right-handed grip strength(β=0.02,SE=0.01,P=0.01),an increase in free triiodothyronine decreased left-(β=-0.06,SE=0.02,P=9.5×10-5)and right-handed grip strength(β=-0.07,SE=0.02,P=9.3×10-5),and subclinical hyperthyroidism decreased gait speed(β=-4.4×10-3,SE=1.7×10-3,P=0.01).The sensitivity analysis results were basically consistent with the main analysis results.To conclude,an increase in thyroid-stimulating hormone is a protective factor for sarcopenia,and elevation of free triiodothyronine and subclinical hyperthyroidism may increase the risk of sarcopenia.

To introduce the general thinking, guidelines, work objectives and elaboration process of the general technical requirements adopted by volume Ⅳ of the Chinese Pharmacopoeia 2025 Edition, and to summarize and figure out the main characteristics on dosage forms, physico-chemical testing, microbial and biological testing, reference standards and guidelines The newly revised general chapters of pharmacopoeia give full play to the normative and guiding role of the Chinese Pharmacopoeia standard, track the frontier dynamics of international drug regulatory science and the elaboration of monographs, expand the application of state-of-the-art technologies, and steadily promote the harmonization and unification with the ICH guidelines； further enhance the overall capacity of TCM quality control, actively implement the 3 R principles on animal experiments, and practice the concept of environmental-friendly； replace and/or reduce the use of toxic and hazardous reagents, strengthen the requirements of drug safety control This paper aims to provide a full-view perspective for the comprehensive, correct understanding and accurate implementation of general technical requirements included in the Chinese Pharmacopoeia 2025 Edition.

Objective To compare the imaging characteristics and surgical methods of pulmonary nodules in the external 1/3 group and internal 2/3 group. Methods A retrospective analysis of clinical data from patients who underwent thoracoscopic preoperative CT-guided lung nodule localization at the Department of Radiology, the First Affiliated Hospital of Xiamen University from September 2020 to April 2022 was conducted. Results A total of 215 patients were enrolled (247 pulmonary nodules), including 70 males and 145 females, with a median age of 48 years. Based on the location of the nodules under CT guidance, those located in the external 1/3 area of the lung were classified into an external 1/3 group, while those located in the middle 1/3 and inner 1/3 areas were classified into an internal 2/3 group. There was no statistical difference between the two groups in terms of general clinical data, nature of pulmonary nodules, distribution of pulmonary nodules in lobes, localization time, or localization complications (P>0.05). However, there were statistical differences in the distance of pulmonary nodules from the pleura [0.6 (0.0-1.9) cm vs. 1.8 (0.0-4.5) cm, P<0.001], size of pulmonary nodules [0.7 (0.2-1.8) cm vs. 1.0 (0.2-2.0) cm, P<0.001], and surgical methods (P=0.002). In the external 1/3 group, 92.1% of nodules underwent thoracoscopic wedge resection, while fewer patients underwent other procedures; in the internal 2/3 group, 77.1% of nodules underwent thoracoscopic wedge resection, and 19.3% underwent segmentectomy. Conclusion The diameter of pulmonary nodules, the distance of pulmonary nodules from the pleura, and surgical methods differ between the external 1/3 group and internal 2/3 group. Thoracic surgeons can develop more precise surgical plans based on the location and size of pulmonary nodules.

AIM: To evaluate the repeatability and accuracy of iCare IC100 tonometer in measuring intraocular pressure(IOP)by comparing the correlation and difference with Goldmann applanation tonometry(GAT)and non-contact tonometer(NCT), and to compare the correlation of the three types of IOP measurement with the central corneal thickness(CCT).METHODS: Prospective study. A total of 90 outpatients(90 eyes)in Liaoning Aier Eye Hospital from March 2019 to May 2019 were randomly selected as study subjects. All patients were measured IOP using iCare IC100, NCT, and GAT. The interclass correlation coefficient(ICC)was used to evaluate the repeatability of IOP measured 3 times consecutively using an intraocular tonometer. The correlation and consistency of iCare IC100, GAT and NCT were compared by one-way ANOVA, Pearson linear correlation analysis and Bland-Altman analysis. The linear regression analysis was used to analyze the correlation of the three tonometers with CCT.RESULTS: The mean IOP measured with iCare IC100, GAT and NCT was 19.74±6.90, 19.88±7.07 and 18.47±6.31 mmHg, respectively(F=1.180, P=0.309). The measurements of iCare IC100 with GAT, iCare IC100 with NCT and GAT with NCT were all positively correlated(r=0.930, 0.946, 0.918, all P<0.05), the Bland-Altman analysis showed that the mean differences between iCare IC100 and GAT, iCare IC100 and NCT, GAT and NCT were -0.142±2.61, 1.27±2.24, and 1.41±2.81 mmHg, respectively, with 97%(87/90), 96%(86/90), and 97%(87/90)IOP differences distributed within their 95% confidence intervals. The IOP measured with iCare IC100 and CCT, GAT and CCT and NCT and CCT were all positively correlated(r=0.426, 0.353, 0.451, all P<0.01). The linear regression equations between iCare IC100, GAT and NCT measurement and CCT were iCare IC100 IOP=-19.62+0.074×CCT; GAT IOP=-13.54+0.063×CCT; NCT IOP=-19.65+0.072×CCT; that is, for every 10 μm increase in CCT, iCare IC100 measurement increased by 0.74 mmHg, GAT measurement increased by 0.63 mmHg, and NCT measurement increased by 0.72 mmHg.CONCLUSION: The iCare IC100 tonometer has good repeatability and accuracy in measuring IOP, and the CCT has a greater impact on the measurement of iCare IC100 than the GAT and NCT.

AIM: To evaluate the repeatability and accuracy of iCare IC100 tonometer in measuring intraocular pressure(IOP)by comparing the correlation and difference with Goldmann applanation tonometry(GAT)and non-contact tonometer(NCT), and to compare the correlation of the three types of IOP measurement with the central corneal thickness(CCT).METHODS: Prospective study. A total of 90 outpatients(90 eyes)in Liaoning Aier Eye Hospital from March 2019 to May 2019 were randomly selected as study subjects. All patients were measured IOP using iCare IC100, NCT, and GAT. The interclass correlation coefficient(ICC)was used to evaluate the repeatability of IOP measured 3 times consecutively using an intraocular tonometer. The correlation and consistency of iCare IC100, GAT and NCT were compared by one-way ANOVA, Pearson linear correlation analysis and Bland-Altman analysis. The linear regression analysis was used to analyze the correlation of the three tonometers with CCT.RESULTS: The mean IOP measured with iCare IC100, GAT and NCT was 19.74±6.90, 19.88±7.07 and 18.47±6.31 mmHg, respectively(F=1.180, P=0.309). The measurements of iCare IC100 with GAT, iCare IC100 with NCT and GAT with NCT were all positively correlated(r=0.930, 0.946, 0.918, all P<0.05), the Bland-Altman analysis showed that the mean differences between iCare IC100 and GAT, iCare IC100 and NCT, GAT and NCT were -0.142±2.61, 1.27±2.24, and 1.41±2.81 mmHg, respectively, with 97%(87/90), 96%(86/90), and 97%(87/90)IOP differences distributed within their 95% confidence intervals. The IOP measured with iCare IC100 and CCT, GAT and CCT and NCT and CCT were all positively correlated(r=0.426, 0.353, 0.451, all P<0.01). The linear regression equations between iCare IC100, GAT and NCT measurement and CCT were iCare IC100 IOP=-19.62+0.074×CCT; GAT IOP=-13.54+0.063×CCT; NCT IOP=-19.65+0.072×CCT; that is, for every 10 μm increase in CCT, iCare IC100 measurement increased by 0.74 mmHg, GAT measurement increased by 0.63 mmHg, and NCT measurement increased by 0.72 mmHg.CONCLUSION: The iCare IC100 tonometer has good repeatability and accuracy in measuring IOP, and the CCT has a greater impact on the measurement of iCare IC100 than the GAT and NCT.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.

The medicinal use of Malvae Semen has a long history. In this paper， by consulting the ancient materia medica， prescription， agronomy， literature and other aspects of the classics， the name， origin， evolution of scientific name， quality， harvesting and processing， functions and indications and others of Malvae Semen were systematically sorted out and verified， so as to provide a basis for the development and utilization of famous classical formulas containing this herb. According to the textual research， Shennong Bencaojing began to use Dongkuizi as the correct name， which was used in the past dynasties， and there were also aliases such as Kuicaizi， Huacai， and Kuizi. Through the original research， it can be seen that Kuicai is the mainstream original plant of Malvae Semen， that is， Malva verticillata var. crispa， the Alcea rosea and M. cathayensis are also used. In modern times， the seeds of Abutilon theophrasti have been passed off as Malvae Semen， while the seeds of M. verticillata var. crispa have rarely been used in medicine. And Abutili Semen has been another medicinal material with different efficacy since the collection of Newly Revised Materia Medica in the Tang dynasty. Since the Ming and Qing dynasties， the cultivation of Kuicai has been decreasing， while A. theophrasti is more common and easy to obtain， and Abutili Semen and Malvae Semen are similar in morphology and confused， which should be corrected. In addition， Malvae Fructus is a Mongolian customary medicinal herb， which is different from the traditional use of seeds in traditional Chinese medicine. Kuicai， as an important vegetable in history， was widely cultivated and gradually shrunk after the Song dynasty， it is now mainly produced in southern provinces. The quality evaluation of Malvae Semen is better for those with dry bodies， full grain， grayish brown color， no mud， and no impurities. The harvesting is generally in the autumn and winter. After drying， it is seeded， sieved peel and impurities， mashed， or slightly stir-fried to yellow-white color with gentle fire. It is sweet， cold and slippery in nature and taste， with the main effects of laxation， diuresis， lactation and elimination of swelling. The efficacy of Abutili Semen is clearing heat and removing toxicity， promoting diuresis and removing nebula， the efficacy is quite different from that of Malvae Semen. Based on the results of textual research， it is suggested that M. verticillata var. crispa should be used as the medicinal source of Malvae Semen in the development of famous classical formulas， the corresponding processing methods should be selected according to the requirements of drug processing in the formulas， while the raw products are recommended to be used if the processing is not specified.