ObjectiveTo establish a model that can quickly identify the aroma components in different parts of Nardostachys jatamansi， so as to provide a quality control basis for the market circulation and clinical use of N. jatamansi. MethodsHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） combined with Smart aroma database and National Institute of Standards and Technology（NIST） database were used to characterize the aroma components in different parts of N. jatamansi， and the aroma components were quantified according to relative response factor（RRF） and three internal standards， and the markers of aroma differences in different parts of N. jatamansi were identified by orthogonal partial least squares-discriminant analysis（OPLS-DA） and cluster thermal analysis based on variable importance in the projection（VIP） value >1 and P<0.01. The odor data of different parts of N. jatamansi were collected by Heracles Ⅱ Neo ultra-fast gas phase electronic nose， and the correlation between compound types of aroma components collected by the ultra-fast gas phase electronic nose and the detection results of HS-SPME-GC-MS was investigated by drawing odor fingerprints and odor response radargrams. Chromatographic peak information with distinguishing ability≥0.700 and peak area≥200 was selected as sensor data， and the rapid identification model of different parts of N. jatamansi was established by principal component analysis（PCA）， discriminant factor alysis（DFA）， soft independent modeling of class analogies（SIMCA） and statistical quality control analysis（SQCA）. ResultsThe HS-SPME-GC-MS results showed that there were 28 common components in the underground and aboveground parts of N. jatamansi， of which 22 could be quantified and 12 significantly different components were screened out. Among these 12 components， the contents of five components（ethyl isovalerate， 2-pentylfuran， benzyl alcohol， nonanal and glacial acetic acid，） in the aboveground part of N. jatamansi were significantly higher than those in the underground part（P<0.01）， the contents of β-ionone， patchouli alcohol， α-caryophyllene， linalyl butyrate， valencene， 1，8-cineole and p-cymene in the underground part of N. jatamansi were significantly higher than those in the aboveground part（P<0.01）. Heracles Ⅱ Neo electronic nose results showed that the PCA discrimination index of the underground and aboveground parts of N. jatamansi was 82， and the contribution rates of the principal component factors were 99.94% and 99.89% when 2 and 3 principal components were extracted， respectively. The contribution rate of the discriminant factor 1 of the DFA model constructed on the basis of PCA was 100%， the validation score of the SIMCA model for discrimination of the two parts was 99， and SQCA could clearly distinguish different parts of N. jatamansi. ConclusionHS-SPME-GC-MS can clarify the differential markers of underground and aboveground parts of N. jatamansi. The four analytical models provided by Heracles Ⅱ Neo electronic nose（PCA， DFA， SIMCA and SQCA） can realize the rapid identification of different parts of N. jatamansi. Combining the two results， it is speculated that terpenes and carboxylic acids may be the main factors contributing to the difference in aroma between the underground and aboveground parts of N. jatamansi.

Objective To assess the risk of hearing loss caused by occupational noise exposure in workers in an automobile manufacturing plant in Tianjin, China, and to perform risk management. Methods Occupational health field investigation and noise exposure measurements were conducted from July to December 2023, and physical examination data were collected. ISO 1999:2013(E) Acoustics-Estimation of Noise-Induced Hearing Loss and WS/T 754-2016 ^“Guidelines for Risk Management of Occupational Disease Hazards Caused by Noise^” were used to predict the risk of high-frequency hearing loss and occupational noise induced deafness for operational workers and make a risk classification. Results The noise intensity of each workshop was 79.4 to 95.5 dB(A), and the maximum noise intensity of welding and stamping exceeded the standard. The results of the assessment showed that the noise level remained unchanged, and the risk of HFHL and ONID in workers increased as the predicted age and length of service increased. It was predicted that after the age of 40, the maximum risk of hearing loss in welding workers would be high risk, and the risk of stamping workers would be at higher risk, suggesting that welding and stamping were the key control posts of noise hazards in the enterprise. The N50 prediction values of permanent hearing threshold displacement caused by potential noise at all frequencies for final assembly and painting workers were lower than the measured values. Conclusion The consequences of hearing loss for workers in the welding and stamping shop noise operations at this automobile manufacturing plant are relatively serious and require risk management.

The lacrimal gland organoids are innovative in vitro cultured tissue model that mimics the lacrimal gland, retaining its original histological and molecular biological properties. This model can more accurately reproduce the physiological environment of the lacrimal gland, including its ductal system and tear film protein secretion. It offers a new platform for studying the physiopathological basis of the lacrimal gland, establishing disease models, conducting regenerative medicine applications, and performing drug screening. Currently, organoids technology is continuously evolving, with ongoing updates to the methods for in vitro culturing of the lacrimal gland. These advancements gradually address challenges related to cultivation complexity, cost, and time, demonstrating a wide range of application potential. In this paper, we summarize the latest progress in lacrimal gland organoids research both domestically and internationally, exploring the development of lacrimal gland organoids, 3D construction technologies, and their potential for clinical applications, in order to provide new insights for clinical research on lacrimal gland-related diseases and to promote broader application of lacrimal gland organoids in drug development and personalized diagnosis and treatment.

The lacrimal gland organoids are innovative in vitro cultured tissue model that mimics the lacrimal gland, retaining its original histological and molecular biological properties. This model can more accurately reproduce the physiological environment of the lacrimal gland, including its ductal system and tear film protein secretion. It offers a new platform for studying the physiopathological basis of the lacrimal gland, establishing disease models, conducting regenerative medicine applications, and performing drug screening. Currently, organoids technology is continuously evolving, with ongoing updates to the methods for in vitro culturing of the lacrimal gland. These advancements gradually address challenges related to cultivation complexity, cost, and time, demonstrating a wide range of application potential. In this paper, we summarize the latest progress in lacrimal gland organoids research both domestically and internationally, exploring the development of lacrimal gland organoids, 3D construction technologies, and their potential for clinical applications, in order to provide new insights for clinical research on lacrimal gland-related diseases and to promote broader application of lacrimal gland organoids in drug development and personalized diagnosis and treatment.

Objective To explore the accuracy of machine learning algorithms based on SHOX2 and RASSF1A methylation levels in predicting early-stage lung adenocarcinoma pathological types. Methods A retrospective analysis was conducted on formalin-fixed paraffin-embedded (FFPE) specimens from patients who underwent lung tumor resection surgery at Affiliated Hospital of Nantong University from January 2021 to January 2023. Based on the pathological classification of the tumors, patients were divided into three groups: a benign tumor/adenocarcinoma in situ (BT/AIS) group, a minimally invasive adenocarcinoma (MIA) group, and an invasive adenocarcinoma (IA) group. The methylation levels of SHOX2 and RASSF1A in FFPE specimens were measured using the LungMe kit through methylation-specific PCR (MS-PCR). Using the methylation levels of SHOX2 and RASSF1A as predictive variables, various machine learning algorithms (including logistic regression, XGBoost, random forest, and naive Bayes) were employed to predict different lung adenocarcinoma pathological types. Results A total of 272 patients were included. The average ages of patients in the BT/AIS, MIA, and IA groups were 57.97, 61.31, and 63.84 years, respectively. The proportions of female patients were 55.38%, 61.11%, and 61.36%, respectively. In the early-stage lung adenocarcinoma prediction model established based on SHOX2 and RASSF1A methylation levels, the random forest and XGBoost models performed well in predicting each pathological type. The C-statistics of the random forest model for the BT/AIS, MIA, and IA groups were 0.71, 0.72, and 0.78, respectively. The C-statistics of the XGBoost model for the BT/AIS, MIA, and IA groups were 0.70, 0.75, and 0.77, respectively. The naive Bayes model only showed robust performance in the IA group, with a C-statistic of 0.73, indicating some predictive ability. The logistic regression model performed the worst among all groups, showing no predictive ability for any group. Through decision curve analysis, the random forest model demonstrated higher net benefit in predicting BT/AIS and MIA pathological types, indicating its potential value in clinical application. Conclusion Machine learning algorithms based on SHOX2 and RASSF1A methylation levels have high accuracy in predicting early-stage lung adenocarcinoma pathological types.

[Objective] To evaluate the efficacy and safety of sacral neuromodulation (SNM) in the treatment of patients with benign prostatic hyperplasia (BPH) complicated with underactive bladder (UAB) who respond poorly to transurethral resection of the prostate (TURP). [Methods] A retrospective analysis was performed on 10 patients with BPH and UAB treated with TURP by the same surgeon in Zhongda Hospital Southeast University during Jan.2018 and Jan.2023.The residual urine volume was not significantly relieved after operation, and the maximum urine flow rate and urine volume per discharge were not significantly improved.All patients underwent phase I SNM, and urinary diaries were recorded before and after surgery to observe the average daily frequency of urination, volume per urination, maximum urine flow rate, and residual urine volume. [Results] The operation time was (97.6±11.2) min.During the postoperative test of 2-4 weeks, if the residual urine volume reduction by more than 50% was deemed as effective, SNM was effective in 6 patients (60.0%). Compared with preoperative results, the daily frequency of urination [(20.2±3.8) times vs. (13.2±3.2) times], volume per urination [(119.2±56.7) mL vs. (246.5±59.2) mL], maximum urine flow rate [(8.7±1.5) mL/s vs. (16.5±2.6) mL/s], and residual urine volume [(222.5±55.0) mL vs. (80.8±16.0) mL] were significantly improved, with statistical significance (P<0.05). There were no complications such as bleeding, infection, fever or pain.The 6 patients who had effective outcomes successfully completed phase II surgery, and the fistula was removed.During the follow-up of 1 year, the curative effect was stable, and there were no complications such as electrode displacement, incision infection, or pain in the irritation sites.The residual urine volume of the other 4 unsuccessful patients did not improve significantly, and the electrodes were removed and the vesicostomy tube was retained. [Conclusion] SNM is safe and effective in the treatment of BPH with UAB patients with poor curative effects after TURP.

The presence of physiological barriers in the eye （both external and internal） makes conventional ophthalmic medications （eye drops， ointments， gels， etc.） less bioavailable and difficult to reach the posterior segment of the eye. Although intravitreal injection can deliver drugs to the posterior segment of the eye， it has disadvantages such as infection， injury， and poor tolerance. Ophthalmic microneedle breaks through the intra- and extra-ocular barriers， enabling the drug to reach the target site accurately and to be released continuously greatly avoiding intraocular infections and injuries， and improving the bioavailability of the drug， which has obvious advantages as an ophthalmic drug delivery tool. Ophthalmic microneedle can be classified into hollow microneedle， dissolving microneedle， and coated microneedle according to the usage methods. Each type of microneedle has its own advantages and has shown satisfactory performance in the treatment of diseases such as bacterial and fungal keratitis， glaucoma， exudative age-related macular degeneration， diabetic macular edema， non-infectious uveitis， corneal neovascularization， and even choroidal melanoma.

BACKGROUND:Zinc-based alloy medical implant materials have excellent mechanical properties,complete degradability and good biocompatibility,and are mainly used in orthopedic implants,cardiovascular stents,bile duct stents,tracheal stents,nerve catheters,etc. OBJECTIVE:To review the research progress of biodegradable zinc-based alloys in bone defect repair and prospect the promising research direction and achievements of zinc-based materials. METHODS:After searching PubMed,Web of Science,WanFang Data,and CNKI databases from the establishment of the database to June 2023,various relevant articles on biodegradable zinc-based alloys for bone implant material research were collected.The basic characteristics of biodegradable zinc based alloys were summarized,and the role of zinc-based alloys in promoting bone tissue repair was sorted and summarized.The current research hotspots and shortcomings were discussed. RESULTS AND CONCLUSION:(1)Zinc-based alloys have good biocompatibility.Using zinc-based alloys as the matrix material,with the help of scaffold structure construction technology and coating optimization process,the bone conductivity of zinc-based alloys will be effectively improved,and their degradation products will have efficient bone induction to regulate the gene expression of osteoblasts and osteoclasts,thereby promoting the repair and reconstruction of bone defects.(2)However,in the research on optimizing zinc-based alloys,the coating process is relatively insufficient,and additive loading technology is still lacking.(3)Zinc-based alloys have excellent mechanical and biological properties.Through special processes,their bone conductivity and osteoinductivity can be increased to effectively improve their ability to promote bone repair and reconstruction,and it is expected to further achieve the development of personalized transplant materials.Further research and development are needed to optimize the integration of coating and additive loading technologies into zinc-based alloys.

BACKGROUND:Scholars at home and abroad consider New Zealand rabbits to be an ideal model animal because of the similar anatomical morphology of the lumbar spine to that of the human lumbar spine.There is a lack of systematic comparison of different ways to establish rabbit intervertebral disc degeneration models under X-ray guidance. OBJECTIVE:To establish a rabbit model of lumbar disc degeneration using X-ray guided acupuncture,end-plate injection and combined method,and to compare the modeling effects of these three methods. METHODS:Eighteen 6-month-old New Zealand white rabbits were randomly selected and divided into four groups:acupuncture group,endplate injection group,combined group and blank control group.In the acupuncture group,three consecutive segments of the intervertebral discs(L2/3,L3/4,L4/5)were needled and modeled;in the endplate injection group,50 μL of anhydrous ethanol was injected at a single point on the endplates of the three consecutive segmental discs;in the combined group,three consecutive segmental intervertebral discs were needled and injected with 50 μL of anhydrous ethanol at four azimuthal points on the endplates of the corresponding segmental discs;and the blank control group received no interventions.X-ray examination was performed to measure the disc height index at 2,4,and 8 weeks after surgery.The intervertebral disc tissues were then taken for anatomical observation and pathological examination. RESULTS AND CONCLUSION:(1)Anatomical examination showed that fibrous annulus rupture,nucleus pulposus degeneration,and total disc structure disorder were the main manifestation in the acupuncture group,endplate injection group,and combined group,respectively.(2)X-ray examination showed that the disc height index showed the most obvious reduction in the acupuncture group at 2 weeks after operation,significant reductions in the endplate injection group at 2 and 4 weeks after operation,and significant reductions in the combined group at 2,4,and 8 weeks after operation.(3)Pathological examination showed that the fibrous ring structure was damaged and the inner annulus fibrosus protruded inward in the acupuncture group;endplate fissure,disordered arrangement and nucleus loss were observed in the endplate injection group;total disc structure disorder with the nucleus pulposus losing water and shrinking and no obvious border with the broken annulus fibrosus was found in the combined group.To conclude,acupuncture,endplate injection and the modified endplate injection method can establish the rabbit intervertebral disc degeneration model.Compared with the single method,the modified endplate injection method can greatly accelerate and aggravate the degeneration of the intervertebral disc,and can effectively shorten the experiment period.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.