Objective: To analyze the infection characteristics of newly reported HIV/AIDS cases in Hangzhou City, so as to provide the reference for effective AIDS intervention. Methods: Newly reported HIV/AIDS cases in Hangzhou City in 2022 were recruited. Demographic information, HIV testing status, infection routes and sexual behaviors were collected using questionnaire surveys. Blood samples were collected before antiviral treatment, and HIV-1 pol gene sequences were detected to construct molecular transmission networks. The characteristics of HIV/AIDS cases, including infection routes, time, and location were analyzed. Factors affecting infection time and location among HIV/AIDS cases were analyzed using a multivariable logistic regression model. Results: A total of 1 007 HIV/AIDS cases were reported in Hangzhou City in 2022, with 907 cases (90.07%) completing questionnaire surveys. Among them, 833 were males (91.84%), and 532 had out-of-province household registrations (58.65%). Ninety-one molecular transmission networks were established, and 276 cases were involved, with homosexual contact as the main infection route (199 cases, 72.10%). There were 311 recently infected cases (35.34%) and 569 previously infected cases (64.66%) among 880 cases whose infection time could be determined. There were 531 locally infected. cases (70.24%) and 225 imported cases (29.76%) among 756 cases whose infection location could be determined. Multivariable logistic regression analysis showed that the HIV/AIDS cases who were identified through voluntary counseling and testing (OR=1.826, 95%CI: 1.055-3.175) and sought sexual partners through homosexual dating apps (OR=2.461, 95%CI: 1.193-5.234) were more likely to be recently infected; the cases who lived in Hangzhou City for more than one year (>1 to 5 years, OR=2.853, 95%CI: 1.552-5.358; >5 years, OR=3.534, 95%CI: 1.382-9.804), sought sexual partners through entertainment venues (OR=3.449, 95%CI: 1.390-8.935), online/social apps (OR=2.416, 95%CI: 1.084-5.488) and homosexual dating apps (OR=3.734, 95%CI: 1.677-8.493) were more likely to be locally infected; student cases were more likely to be infected outside Hangzhou City (OR=0.115, 95%CI: 0.019-0.525). Conclusions The newly reported HIV/AIDS cases in Hangzhou City in 2022 were primarily infected through homosexual contact, previously and locally. Seeking sexual partners through homosexual dating apps is an important influencing factor for recent and local infections, highlighting the need for strengthening traceback investigations of related cases.

Objective: To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma. Methods: This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed. Results: The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration. Conclusion Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening(microstomia)due to systemic scleroderma.Methods This study followed medical ethics,and informed consent has been obtained from patients.A case of Ken's Type Ⅰ mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression.Individual trays were made based on the patient's left and right mandibular dentition,and segmented molds were obtained.Simultaneously,intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles.After each part of the model was obtained,the man-dibular model was scanned and digitally aligned to form the final denture model,and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing(CAD/CAM)technology.At the same time,combined with the literature,the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.Results The denture was well retained and achieved a good repair ef-fect.The patients expressed satisfaction with the mastication efficiency and other functions of the denture.The findings of the literature review show that the integration of digital technology with the traditional impression method,along with computer fitting,can accurately obtain the patient's oral model and facilitate successful follow-up repairs.However,when the anterior mandibular dentition of the patient is absent,the margin of error is increased in this procedure,which deserves further exploration.Conclusion Utilizing digital technology as the leading method,combined with the tradi-tional impression method of segmental impression,for the repair of dental defects in patients with limited mouth open-ing,has proven to be effective.Thus,patients report a positive medical experience with high satisfaction,indicating that this approach is worthy of clinical promotion.

Objective To investigate the effect of the socket-shield technique(SST)concurrent with immediate im-plant placement and provisionalization(IIPP)in the aesthetic restoration of anterior teeth.Methods A case of maxil-lary anterior tooth stumps with a thin labial bone wall was treated with SST for preservation of labial soft and hard tissue fullness,combined with an immediate implant placement and immediate provisional crown for restoring the shape of the tooth and gingival molding.Results Immediate implant placement and provisionalization restored the morphology and function of the affected tooth in the shortest possible time.The patient's labial soft and hard tissue contours in the affected tooth area were well preserved in the 18-month follow-up after the application of the SST,which presented a better aesthetic result.The literature review indicates that the indications for SST are unrestorable maxillary anterior teeth,whose dental,periodontal and periapical tissues are healthy and intact.In the esthetic zone,root shielding is effec-tive in maintaining the soft and hard tissue contour on the labial side of the implant.However,there is no consensus on the technical details of SST,such as the ideal coronal height and thickness of the shield,and the management of the gap between the shield and the implant.Thus,more clinical studies and histologic evidence are needed to provide a refer-ence for clinical decision-making.In addition,digital technology can improve the accuracy of implant placement and shield preparation.Conclusion The correct application of SST combined with IIPP in the esthetic zone can ensure es-thetic results.However,more high-quality evidence-based medical evidence is needed for its long-term efficacy,and in-dications should be strictly controlled during clinical application.

Objective: To investigate the immune reconstitution of HIV/AIDS patients and its influencing factors after receiving antiviral therapy (ART) in Hangzhou City, so as to provide insights into improving the treatment effects and quality of life in HIV/AIDS patients. Methods: A retrospective cohort of HIV/AIDS patients who began antiviral treatment between January 1, 2016 and August 31, 2021 and had a baseline CD4+T lymphocyte (CD4) counts of less than 500 cells/μL or a baseline CD4/CD8+T lymphocyte (CD8) ratio of less than 0.8 in Hangzhou City was followed up until August 31, 2023. Demographic information, antiviral therapy in formation, CD4 counts, and CD4/CD8 were collected from the Chinese Disease Prevention and Control Information System. A good immune reconstitution was defined as having CD4≥500 cells/μL and CD4/CD8≥0.8. The immune reconstitution status of HIV/AIDS patients were analyzed, and factors affecting immune reconstitution were identified using a multivariable Cox proportional risk regression model. Results: A total of 3 349 HIV/AIDS patients were enrolled, with a median age at ART of 31 (interquartile range, 20) years. There were 3 075 males (91.82%), 1 600 cases with college education and above (47.78%) and 2 455 cases at WHO clinical stage Ⅰ-Ⅱ(73.31%). There were 1 368 cases with good immune reconstitution, accounting for 40.85%, and the proportion of HIV/AIDS patients with good immune reconstitution that began ART in 2016 was the highest, reaching 51.90%. Multivariable Cox proportional risk regression model identified WHO clinical stage (Ⅰ-Ⅱ, HR=2.529, 95%CI: 2.023-3.162), timely ART (HR=1.196, 95%CI: 1.027-1.394), initial treatment regimen (TDF+3TC+NVP/EFV, HR=2.185, 95%CI: 1.891-2.524; integrase inhibitors, HR=8.509, 95%CI: 6.706-10.795), baseline CD4/CD8 (≥0.1, HR: 1.600-4.515, 95%CI: 1.061-6.661), baseline hemoglobin (<90 mg/dL, HR=0.327, 95%CI: 0.121-0.880), hepatitis B infection (HR=0.619, 95%CI: 0.457-0.840) and hepatitis C infection (HR=0.308, 95%CI: 0.099-0.956) as factors affecting immune reconstitution in HIV/AIDS patients. Conclusion The immune reconstitution in HIV/AIDS patients after ART is associated with WHO clinical stage, timely ART, initial treatment regimen, baseline CD4/CD8, baseline hemoglobin and hepatitis B or C infection.