ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the effects of Fangji Fulingtang on macrophage polarization and oxidative stress in the mouse model of myocardial fibrosis. MethodThe mouse model of myocardial fibrosis was established by subcutaneous injection of isoproterenol （ISO， 5 mg·kg^-1·d^-1）. Fifty C57BL/6J mice were randomly assigned into control （0.9% NaCl）， model （0.9% NaCl）， low- and high-dose （3.315 g·kg^-1·d^-1 and 13.26 g·kg^-1·d^-1， respectively） Fangji Fulingtang （FFD-L and FFD-H， respectively）， and metoprolol tartrate （Meto， 15 mg·kg^-1·d^-1） groups， with 10 mice each group. After 2 weeks of treatment， the heart appearance， cardiac weight index （CWI）， heart weight （HW）/tibia length （TL） ratio， and myocardial histopathological alterations were observed. Meanwhile， the serum levels of creatine kinase-MB （CK-MB）， transforming growth factor-β₁ （TGF-β₁）， tumor necrosis factor-α （TNF-α）， interleukin （IL）-1β， IL-6， IL-10， malondialdehyde （MDA）， superoxide dismutase （SOD）， and glutathione （GSH） were measured by enzyme-linked immunosorbent assay （ELISA）. The expression levels of CD86 and CD206 were observed by immunohistochemical staining. ResultCompared with the model group， the FFD-L， FFD-H， and Meto groups showed improved heart appearance， decreased CWI and HW/TL ratio （P<0.01）， lowered serum levels of CK-MB， TGF-β₁， TNF-α， IL-1β， and IL-6 （P<0.05， P<0.01）， and elevated IL-10 level （P<0.05）. Furthermore， the three groups showed reduced infiltration of inflammatory cells， myocardial injury， collagen deposition， and myocardial fibrosis， decreased CD86， SOD， and GSH （P<0.01）， and increased CD206 and MDA （P<0.01）. ConclusionFangji Fulingtang can mitigate ISO-induced myocardial fibrosis by regulating macrophage polarization and oxidative stress.

Volatile oil microemulsion gel of traditional Chinese medicine has the dual characteristics of microemulsion and gel， which can improve the solubility and stability of drugs， promote drug absorption and achieve long-term sustained release effect. In recent years， it has been widely used in clinical diseases such as internal medicine， gynecology and pediatrics. In this paper， the characteristics， prescription design， molding process and quality evaluation of volatile oil microemulsion gel of traditional Chinese medicine were reviewed by searching relevant literature. The results showed that the volatile oil microemulsion gel had the characteristics of improving the stability of the drug， increasing the transdermal penetration of the drug， strong adhesion， easy to wash， convenient preparation， etc. The prescription design consists of oil phase， surfactant， cosurfactant and gel matrix. The molding process includes the molding process of microemulsion and the molding process of gel， and the formation of microemulsion mainly uses the pseudo-ternary phase diagram method. The quality evaluation can be divided into 2 parts： volatile oil of traditional Chinese medicine and microemulsion gel. The quality evaluation of volatile oil can be studied qualitatively and quantitatively. Microemulsion gel should meet the relevant requirements and be tested for in vitro release and transdermal absorption.

Objective To analyze the infiltration abundance of macrophage M2 in breast cancer tissues and explore the correlation between VSIG4 and macrophage M2 and the potential mechanism of regulating the invasion and migration of breast cancer patients. Methods We downloaded the RNA-seq data of TCGA-BRCA and assessed the infiltration abundance of immune cells in the samples by CIBERSORT, and established a prognostic risk prediction model. Then, we analyzed the effect of macrophage M2 and VSIG4 on the prognosis of breast cancer patients. In addition, we analyzed the signaling pathway associated with VSIG4 by gene set enrichment analysis and predicted its upstream regulation of miRNA. Results The infiltration abundance of macrophage M2, age, PR status and pathological stage were involved in the establishment of risk prediction model, and the model had a good prediction performance (AUC=0.816). High infiltration of macrophage M2 (HR=1.35, P < 0.05) and high expression of VSIG4 (HR=1.4, P=0.039) suggested poor prognosis of breast cancer patients. VSIG4 could be regulated by upstream miR-29a-3p and significantly correlated with Toll-like receptor, cell adhesion, production and release of cytokine. Conclusion VSIG4 is significantly associated with breast cancer patients' prognosis and infiltration of macrophage M2, regulated by the upstream miR-29a-3p and promotes the invasion and migration of breast cancer cells. It can be used as a potential prognostic marker for breast cancer.

Objective:To understand the current status of anti-hypertensive drug use in patients with hypertension in the Southwest areas of China.Methods:Based on the Program of Screening and Intervention Subjects with High Risk Cardiovascular Diseases, this study presented information on adults aged 35-75 in Southwest China by convenient sampling method, from January 2016 to November 2018. Basic information and cardiovascular related data were collected. Data on hypertensive patients were recorded, including names, doses and frequency of anti-hypertensive drugs they used. Information on the use of anti-hypertensive drugs among different hypertension subgroups, potential related characteristics, types and combination patterns of drugs, etc., were analyzed. Results:A total of 394 957 subjects were included in the study, with 159 014 identified as being hypertensive [mean age (58.8±9.5) years, 40.2 % male]. 29.8 % of them ever received antihypertensive drugs. A total of 30 445 of the patients reported detailed information of the drugs they ever used and 22.5 % of them received therapy of combined drugs. Rates of using combination therapy were consistent among subgroups with different age, gender, blood pressure level and history of cardiovascular and cerebrovascular diseases. Results from the multivariate logistic regression analysis showed that patients with previous cardiovascular and cerebrovascular events, obesity or diabetes were more likely to have received combined therapy, while patients with less education or lower income were in the opposite. Calcium antagonists (58.6 %) were the main drugs being used in single drug therapy, while traditional fixed-dose combination drugs (31.4 %) were the most common ones in the drug-combination therapy, followed by angiotensin converting enzyme inhibitor/angiotensin receptor blocker combined with calcium antagonists (22.4 %). Angiotensin converting enzyme inhibitor/angiotensin receptor blocker combined with beta blocker was the main drug used in patients with coronary heart disease. Conclusions:Treatment programs using the antihypertensive drugs for hypertensive patients in Southwest China needs to be improved, since the irrational use of antihypertensive drugs still exists. However, we would encourage the use of combination therapy for hypertensive patients.

Objective To investigate the changes and the mechanism of blood perfusion in perfusion weighted image ( PWI)-diffusion weighted image ( DWI) mismatched regions after infarction and to assess the effect on prognosis .Methods We assessed 84 patients with acute cerebral infarction within 72 hours of onset in the territory of anterior circulation , who admitted to Affiliated Drum Tower Hospital , Nanjing University Medical School between January 2009 and June 2011.All patients were imaged with 3.0 T MRI on day one.The patients were divided into mismatched group (31 patients) and matched group (53 patients) according to the basis of PWI-DWI.The two groups received the same treatment including anti-platelet, oxygen free radical scavenger and lowing cholesterol therapy .Barthel index was used to evaluate neurological deficit on day 0, day 12 and three months later.We also compared the perfusion parameters of day 0 with day 12 by PWI from mismatched group.Results On day 12, the value of relative cerebral blood flow increased by 7.37%(t=-2.076, P<0.05) and the value of relative mean transit time decreased by 11.06%(t=2.972,P<0.01) compared with that on day 0 from mismatched group.However, there was no significant difference in Activity of Daily Living scale ( ADL) score between the two groups after 12 days′treatment.After three months, the patients of mismatched group had higher ADL score (75.48 ±3.26) than that of matched group (66.23 ±3.04; t=2.079, P<0.05).Conclusion The patients of mismatched group had better neurofunction than matched group , possibly related to improvement of perfusion in mismatched area.