ObjectiveTo analyze the results of fit testing and its influencing factors on half-mask respirator among workers exposed to organic solvents. Methods A total of 84 workers exposed to organic solvents were selected as the research subjects using a convenience sampling method. The qualitative fit test apparatus of respiratory protection was tested after the workers had put on the half-mask respirats, and 11 facial indicators of the subjects were measured. Results The overall pass rate of the respirator fit testing was 71.4% (60/84). The lowest pass rate was 63.1% (53/84), which occurred during bending movements of workers. The head width, minimum forehead width, face length, nose length, nose depth, head circumference and head length were higher in workers who passed respirator fit testing, compared with those in the failing group (all P<0.05). The result of binary logistic regression analysis showed that gender and face width were influencing factors of the respirator fit testing (both P<0.05). Female workers had a lower pass rate of the fit testing than male workers, and workers with larger face width had a lower pass rate in the fit testing. Conclusion Drastic movement may lead to a decrease in the seal of half-mask respirator of workers exposed to organic solvents. When providing half-mask respirator to workers exposed to organic solvents, employers need to pay attention to the fit of respirators of female works and those with larger face width to ensure the effectiveness of respiratory protection for workers.

Respiratory protective equipment (RPE) is an effective measure to protect the health of workers. The domestic and foreign facial classfication of fit testing of RPE is mainly categorized into Los Alamos National Laboratory (LANL) classification, National Institute for Occupational Safety and Health (NIOSH) classification, principal component analysis (PCA) classification, Chinese Han adult facial classification, and Chinese young male facial classification. The LANL classification has low applicability. The NIOSH classification included different ethnicity and region of the study subjects, which is more representative for the American population. The PCA facial classification is complex to use and has low matching with RPE sizes. The Chinese Han adult facial classification and Chinese young male facial classification included more facial data of Chinese Han population and young population. There are qualitative and quantitative fit testing. Qualitative methods include the isoamyl acetate method, saccharin solution aerosol method, aerosol bitter testing solution method, and irritant smoke method which are cost-effective and easy to use, but are highly subjective to the study subjects. Quantitative methods include the aerosol generated method, environmental aerosol condensation nucleus counting method, and the controlled negative pressure method, which accurately quantify the facial fit of RPE but require specific testing equipment and high costs. It is necessary to include occupational populations from multiple industries, combine facial fit testing and fit testing methods of RPE, and establish a follow-up database based on digital information platforms, to achieve dynamic monitoring of respiratory protection levels among different occupational populations in the future.

Oxalate is an organic dicarboxylic acid that is a common component of plant foods.The kidneys are essential organs for oxalate excretion,but excessive oxalates may induce kidney stones.Jupiter micro-tubule associated homolog 2(JPT2)is a critical molecule in Ca2+mobilization,and its intrinsic mecha-nism in oxalate exposure and kidney stones remains unclear.This study aimed to reveal the mechanism of JPT2 in oxalate exposure and kidney stones.Genetic approaches were used to control JPT2 expression in cells and mice,and theJPT2 mechanism of action was analyzed using transcriptomics and untargeted metabolomics.The results showed that oxalate exposure triggered the upregulation of JPT2,which is involved in nicotinic acid adenine dinucleotide phosphate(NAADP)-mediated Ca2+mobilization.Tran-scriptomic analysis revealed that cell adhesion and macrophage inflammatory polarization were inhibited by JPT2 knockdown,and these were dominated by phosphatidylinositol 3-kinase(PI3K)/AKT signaling,respectively.Untargeted metabolomics indicated that JPT2 knockdown inhibited the produc-tion of succinic acid semialdehyde(SSA)in macrophages.Furthermore,JPT2 deficiency in mice inhibited kidney stones mineralization.In conclusion,this study demonstrates that oxalate exposure facilitates kidney stones by promoting crystal-cell adhesion,and modulating macrophage metabolism and in-flammatory polarization via JPT2/PI3K/AKT signaling.

OBJECTIVE: To explore the predictive value of acute physiology and chronic health evaluation II (APACHE II), sequential organ failure assessment (SOFA), quick sequential organ failure assessment (qSOFA) and modified early warning score (MEWS) in evaluating the prognosis of patients in intensive care unit (ICU) of secondary hospitals, and to provide guidance for clinical application. METHODS: The clinical data of adult critical patients admitted to the ICU of Wanzhou District First People's Hospital from October 2022 to April 2023 were retrospectively analyzed. According to the clinical outcome of ICU, the patients were divided into improvement group and death group. The general information, blood routine, heart, liver and kidney function indicators, coagulation indicators, blood gas analysis, APACHE II score, SOFA score, qSOFA score, MEWS score at the time of admission to the ICU, the number of cases of invasive mechanical ventilation (IMV) and continuous blood purification (CBP) were compared between the two groups. Univariate analysis was performed, and multivariate Logistic regression analysis was used to analyze the related factors of death. Receiver operator characteristic curve (ROC curve) was used to analyze the predictive value of the four scores in ICU patients. RESULTS: A total of 126 patients were included, of which 45 patients died in the ICU and 81 patients improved and transferred out. Univariate analysis of death-related critically ill patients showed that procalcitonin (PCT), serum creatinine (SCr), blood urea nitrogen (BUN), albumin (ALB), prothrombin time (PT), activated partial prothrombin time (APTT), D-dimer, pH value, HCO₃^-, blood lactic acid (Lac), number of patients treated with IMV and CBP, APACHE II score, SOFA score, qSOFA score and MEWS score were significantly different between the two groups (all P < 0.05). Multivariate Logistic regression analysis showed that the APACHE II score [odds ratio (OR) = 1.115, 95% confidence interval (95%CI) was 1.025-1.213, P = 0.011], SOFA score (OR = 1.204, 95%CI was 1.037-1.398, P = 0.015), MEWS score (OR = 1.464, 95%CI was 1.102-1.946, P = 0.009), and APTT (OR = 1.081, 95%CI was 1.015-1.152, P = 0.016) were independent risk factors affecting the mortality of critically ill patients in the ICU. ROC curve analysis showed that APACHE II, SOFA, qSOFA, and MEWS scores could predict the prognosis of critically ill ICU patients, among which SOFA score had the strongest predictive effect, and the area under the curve (AUC) was 0.808. There was a statistically significant difference in the time required for the four scores (F = 117.333, P < 0.001), among which the MEWS scoring required the shortest time [(1.03±0.39) minutes], and the APACHE II scoring required the longest time [(2.81±1.04) minutes]. CONCLUSIONS APACHE II, SOFA, qSOFA, and MEWS scores can be used to assess the severity of critically ill patients and predict in-hospital mortality. The SOFA score is superior to other scores in predicting severity. The MEWS is preferred because its assessment time is shortest. Early warning score can help secondary hospitals to detect potentially critical patients early and provide help for clinical rapid urgent emergency decision-making.
Adult ; Humans ; Sepsis/diagnosis* ; ROC Curve ; Retrospective Studies ; Critical Illness ; Early Warning Score ; Organ Dysfunction Scores ; Intensive Care Units ; Prognosis ; Hospitals

Objective:To investigate the clinical, imaging, and pathological characteristics of renal oncocytoma, and to improve the understanding, diagnosis, and treatment of renal oncocytoma.Methods:The imaging and pathological data of two patients misdiagnosed with renal cell carcinoma in the 970 Hospital of PLA Joint Logistics Support Force from January to March 2021 were retrospectively analyzed. The relevant literature was reviewed and discussed.Results:The tumors were located in the left kidney of two patients, with diameters of 2.7 cm and 3.2 cm respectively. The patients underwent retroperitoneal laparoscopic removal of partial left kidney and retroperitoneal laparoscopic removal of the whole left kidney separately. The pathological results confirmed the diagnosis of renal oncocytoma.Conclusion:Renal oncocytoma is a rare benign renal cell tumor which is difficult to be diagnosed before surgery. Contrast-enhanced CT can provide evidence for the identification of renal oncocytoma. Its final diagnosis depends on pathological results.

Background Most of the studies on grading and classification of occupational health compre-hensive risks for specific employers still remain in the establishment and description of methodology, and practical application studies are rarely reported. Objective To explore the application of an occupational disease hazards comprehensive risk assessment method issued by the National Disease Control and Prevention Bureau in conjunction with the National Health Commission and a self-developed occupational health grading and classification method in petroleum refining enterprises, and to provide practical experience for the implementation of differentiated law enforcement by relevant regulatory authorities. Methods Two occupational health grading and classification methods were practiced in three petroleum refining enterprises in Guangdong Province. The occupational hazards comprehensive risk assessment method was provided by the Notice on Carrying out Pilot Work of Occupational Health Classification Supervision and Law Enforcement of the National Disease Control and Prevention Bureau and the National Health Commission. The principle was to derive the occupational health risk level according to nature of occupational hazards, exposure level, and number of workers exposed to them in an employer, and then to classify them into Class A, Class B, and Class C by combining with local occupational health management status level. The occupational health grading and classification method was self-developed according to available domestic and foreign occupational health risk assessment methods. Its principle was to calculate the risk level of each workstation in an employer based on published carcinogenicity classification or LD₅₀/LC₅₀ of chemical toxicants, level of noise, exposure parameters such as exposure level and exposure frequency, estimate the comprehensive risk R_o of the target employer by the Romanian comprehensive risk calculation method, and then calculate a comprehensive risk R_o' weighted by the occupational health management index of the target employer and classify it into class A, class B, and class C. Finally, assessment results, scope of application, inquired indicators, advantages,disadvantages and professional competence requirements of the two grading and classification methods were compared. Results The occupational hazards that were evaluated in three enterprises in this study were benzene, toluene, xylene, gasoline, hydrogen sulfide, and noise. The exposure levels of benzene, toluene, xylene, and gasoline were all below 10% OEL (occupational exposure limit), and hydrogen sulfide and noise were disqualified. Occupational hazards such as benzene and hydrogen sulfide were serious occupational hazards in the three enterprises, and the number of workers exposed was 461, 912, and 224, respectively; the HRs (hazard ratings) of benzene, toluene, xylene, gasoline, hydrogen sulfide, and noise were level 5, 3, 2, 3, 5, and 3 respectively. The occupational health management status of the three enterprises was graded as B, A, and B, respectively by the occupational disease hazards comprehensive risk assessment method. The occupational health management index of the three enterprises was graded as B, A, and A, respectively by the occupational health grading and classification method. The comprehensive risk assessment results showed that two enterprises classified into as the highest class C and one into class B by the occupational disease hazards comprehensive risk assessment method, while all three enterprises were classified into class B by the occupational health grading and classification method. Conclusion The two grading and classification methods are not consistent in the evaluation results of petroleum refining enterprises, and there are differences in the evaluation scope, indicators to be collected, and professionalism. It is recommended that occupational health regulators should fully consider the advantages and disadvantages of the two methods and choose the appropriate assessment method according to the actual regulatory purpose.

Objective:To understand the current situation of noise hazard in a motor manufacturing enterprise, and to explore the protective effect of workers wearing hearing protective device and its possible influencing factors.Methods:In November 2021, a total of 179 noise workers wearing hearing protective devices in a motor manufacturing company in a city were selected as research objects. Personal attenuation rating (PAR) of workers wearing hearing protective devices was measured. Baseline PAR was analyzed for different subgroups of basic demographic information, noise exposure, and the use of hearing protective devices to evaluate the effect of the intervention. Baseline PAR was compared using nonparametric tests.Results:There were 179 workers from 35 positions in 4 types of work, and the over-standard noise rate was 51.2% (42/82), among which the noise exposure intensity of motor equipment debugging workers was the highest [94.4 dB (A) ]. Compared the baseline PAR of different characteristics, it was found that the baseline PAR of male workers, workers whose daily noise exposure time were <8 h, workers who had used the hearing protective devices for 10 to 14 years, and workers who thought the hearing protective devices were comfortable were all higher, and the differences were statistically significant ( P<0.05). Baseline PAR passing rate was 43.0% (77/179), and PAR of 102 workers who did not pass baseline test increased from 0 (0, 3) dB before intervention to 14 (12, 16) dB after intervention, with statistical significance ( P<0.05) . Conclusion:The noise hazard in this motor manufacturing enterprise is serious, and the protective effect of workers wearing hearing protective devices is not good. Gender, daily noise exposure time, years and comfort of wearing hearing protective device are the possible influencing factors of poor protective effect.

Objective:To understand the current situation of noise hazard in a motor manufacturing enterprise, and to explore the protective effect of workers wearing hearing protective device and its possible influencing factors.Methods:In November 2021, a total of 179 noise workers wearing hearing protective devices in a motor manufacturing company in a city were selected as research objects. Personal attenuation rating (PAR) of workers wearing hearing protective devices was measured. Baseline PAR was analyzed for different subgroups of basic demographic information, noise exposure, and the use of hearing protective devices to evaluate the effect of the intervention. Baseline PAR was compared using nonparametric tests.Results:There were 179 workers from 35 positions in 4 types of work, and the over-standard noise rate was 51.2% (42/82), among which the noise exposure intensity of motor equipment debugging workers was the highest [94.4 dB (A) ]. Compared the baseline PAR of different characteristics, it was found that the baseline PAR of male workers, workers whose daily noise exposure time were <8 h, workers who had used the hearing protective devices for 10 to 14 years, and workers who thought the hearing protective devices were comfortable were all higher, and the differences were statistically significant ( P<0.05). Baseline PAR passing rate was 43.0% (77/179), and PAR of 102 workers who did not pass baseline test increased from 0 (0, 3) dB before intervention to 14 (12, 16) dB after intervention, with statistical significance ( P<0.05) . Conclusion:The noise hazard in this motor manufacturing enterprise is serious, and the protective effect of workers wearing hearing protective devices is not good. Gender, daily noise exposure time, years and comfort of wearing hearing protective device are the possible influencing factors of poor protective effect.

PiggyBac is a transposable DNA element originally discovered in the cabbage looper moth (Trichoplusia ni). The T. ni piggyBac transposon can introduce exogenous fragments into a genome, constructing a transgenic organism. Nevertheless, the comprehensive analysis of endogenous piggyBac-like elements (PLEs) is important before using piggyBac, because they may influence the genetic stability of transgenic lines. Herein, we conducted a genome-wide analysis of PLEs in the brown planthopper (BPH) Nilaparvata lugens (Stål) (Hemiptera: Delphacidae), and identified a total of 28 PLE sequences. All N. lugens piggyBac-like elements (NlPLEs) were present as multiple copies in the genome of BPH. Among the identified NlPLEs, NlPLE25 had the highest copy number and it was distributed on five chromosomes. The full length of NlPLE25 consisted of terminal inverted repeats and sub-terminal inverted repeats at both terminals, as well as a single open reading frame transposase encoding 546 amino acids. Furthermore, NlPLE25 transposase caused precise excision and transposition in cultured insect cells and also restored the original TTAA target sequence after excision. A cross-recognition between the NlPLE25 transposon and the piggyBac transposon was also revealed in this study. These findings provide useful information for the construction of transgenic insect lines.
Amino Acid Sequence ; Animals ; Animals, Genetically Modified ; DNA Transposable Elements/genetics* ; Hemiptera/genetics* ; Transposases/genetics*

The osteoporotic fracture, also known as fragility fracture, occurs due to osteoporosis. With the acceleration of aging in China, the incidence of osteoporotic fracture increases rapidly, which causes significant changes in the spectrum of orthopedic trauma. The osteoporotic fracture has both the commonness and particularity of fracture, which poses challenges to orthopedic surgeons. Meanwhile, the fast improvement of interdisciplinary research and the advancement of basic research in bone metabolism have brought many opportunities to facilitate the treatment of osteoporotic fracture. The authors intend to illustrate the challenges and solutions during the treatment of osteoporotic fracture by elaborating the awareness, fracture assessment, drug development, implant design, postoperative rehabilitation and refracture prevention to establish an improved protocol for the therapy.