OBJECTIVE To evaluate the long-term cost-effectiveness of canagliflozin or semaglutide in patients with type 2 diabetes mellitus（T2DM）poorly controlled with metformin. METHODS Based on the perspective of China’s health system， a Markov model was used to calculate the long-term costs and utilities of canagliflozin or semaglutide combined with metformin for T2DM patients in China for 30 years based on the data from SUSTAIN 8 study. The incremental cost-effectiveness ratio（ICER） and incremental net monetary benefit （INMB） were calculated using one time the 2024 per capita gross domestic product（GDP） as the willingness-to-pay（WTP） threshold. One-way sensitivity analysis， probability sensitivity analysis and scenario analysis were conducted to confirm the stability of the conclusions. RESULTS Compared with canagliflozin + metformin， ICER of semaglutide combined with metformin was 260 485.67 yuan/quality-adjusted life year （QALY），which was higher than the WTP threshold set in this study （95 749 yuan/QALY），and the corresponding INMB was －61 576.24 yuan，indicating that the canagliflozin + metformin regimen was more cost-effective. The cost of diabetes without complications treatment in the semaglutide + metformin group had the greatest influence on INMB，but changes in parameters within the selected range did not drive decision reversal. With the increasing of WTP threshold，the economic acceptability of semaglutide + metformin regimen increased. Under the current WTP threshold，the annual cost of semaglutide should be reduced by 42.95% to make the semaglutide + metformin regimen more cost- effective. CONCLUSIONS From the perspective of China’s health system， canagliflozin + metformin is more cost-effective than semaglutide + metformin for T2DM patients yueru. with poor glycemic control with metformin alone.

Liver transplantation is the most effective radical treatment for hepatocellular carcinoma (HCC), especially for patients with HCC complicated by cirrhosis. Since most patients are in an advanced stage of unresectable state when they are present, the preoperative downstaging treatment for liver transplantation in HCC is of great significance for increasing the opportunity for surgery, reducing the dropout rate from the liver transplant waiting list, and thereby lowering the postoperative recurrence rate. Currently, immune checkpoint inhibitor (ICI)-based combination immunotherapy and targeted therapy is the most effective treatment for preoperative downstaging in liver transplantation for HCC. However, the immunoenhancing effects of ICI may increase the risk of post-transplant rejection. Therefore, it is necessary to find a "critical point" that allows ICI to effectively inhibit tumor growth during preoperative downstaging treatment without causing severe rejection after transplantation. This article reviews the latest advances in preoperative ICI treatment protocols, efficacy assessment, indications, contraindications, drug discontinuation timing, and principles of prevention and treatment of rejection in liver transplantation for HCC.

Objective: To identify biomolecular markers closely related to the occurrence of kidney renal clear cell carcinoma (KIRC) and verify their expression levels in clinical samples. Methods: Stage Ⅰ KIRC mRNA sequencing data were obtained from The Cancer Genome Atlas (TCGA).Principal component analysis (PCA) was used for dimensionality reduction to screen differentially expressed genes (DEGs)，which then underwent GO and KEGG analyses.Weighted gene co-expression network analysis (WGCNA) was used to screen genes significantly related to KIRC，and a protein-protein interaction (PPI) network was constructed to screen hub genes.The diagnostic value of hub genes was evaluated with receiver operating characteristic (ROC) curve，and their prognostic value was analyzed using survival curve plots.The correlation between the mRNA expressions of hub genes and the pathological stages of KIRC was analyzed.Clinical samples of 20 patients with stage Ⅰ KIRC treated in our hospital were included，and the expressions of the hub genes in cancerous and adjacent tissues were detected with reverse transcription real-time quantitative polymerase chain reaction (RT-qPCR)，Western blotting，and enzyme-linked immunosorbent assay (ELISA). Results: A total of 8223 DEGs were screened out，including 4092 up-regulated ones and 4131 down-regulated ones.GO analysis showed that DEGs were related to bioadhesion，plasma membrane composition，and transporter activity.KEGG analysis showed that DEGs were related to pathways such as cell adhesion molecules，cytokine-cytokine receptor interactions，and interactions between viral proteins and cytokines and cytokine receptors.WGCNA analysis obtained 171 genes that were significantly related to stage Ⅰ KIRC.The hub gene，lymphocyte cytosolic protein 2 (LCP2)，screened out by the PPI network，was significantly related to stage Ⅰ KIRC.The area under the ROC curve was 0.96.The expression level was negatively correlated with the overall survival rate of patients.The expression of LCP2 was related to the stage and lymph node metastasis.Clinical verification showed that the mRNA and protein relative expressions of LCP2 in KIRC tissues were significantly higher than those in adjacent tissues (P<0.000 1). Conclusion: LCP2 is significantly up-regulated in stage Ⅰ KIRC tissues and can be used as a potential biomarker for the early diagnosis and treatment of KIRC.

Nasal drug delivery efficiency is highly dependent on the position in which the drug is deposited in the nasal cavity. However, no reliable method is currently available to assess its impact on delivery performance. In this study, a biomimetic nasal model based on three-dimensional (3D) reconstruction and three-dimensional printing (3DP) technology was developed for visualizing the deposition of drug powders in the nasal cavity. The results showed significant differences in cavity area and volume and powder distribution in the anterior part of the biomimetic nasal model of Chinese males and females. The nasal cavity model was modified with dimethicone and validated to be suitable for the deposition test. The experimental device produced the most satisfactory results with five spray times. Furthermore, particle sizes and spray angles were found to significantly affect the experimental device's performance and alter drug distribution, respectively. Additionally, mometasone furoate (MF) nasal spray (NS) distribution patterns were investigated in a goat nasal cavity model and three male goat noses, confirming the in vitro and in vivo correlation. In conclusion, the developed human nasal structure biomimetic device has the potential to be a valuable tool for assessing nasal drug delivery system deposition and distribution.

ObjectiveTo explore whether the mechanism of Shuangshen Ningxin capsules （SSNX） in alleviating myocardial ischemia-reperfusion injury （MIRI） in rats is related to the regulation of mitochondrial fission and fusion. MethodThis study focused on Sprague Dawley （SD） rats and ligated the left anterior descending branch of the coronary artery to construct a rat model of MIRI. The rats were divided into the sham operation group， model group， SSNX group （90 mg·kg^-1） and trimetazidine group （5.4 mg·kg^-1）. The activity of superoxide dismutase （SOD） and the content of malondialdehyde （MDA） were detected by micro method. Changes in mitochondrial membrane potential （△Ψm） and the degree of mitochondrial permeability transition pore （mPTP） opening were detected by the chemical fluorescence method. The intracellular adenosine triphosphate （ATP） level was detected by the luciferase assay. The messenger ribonucleic acid （mRNA） and protein expression levels of mitochondrial fission and fusion related factors dynamin-related protein 1 （DRP1）， mitochondrial fission 1 protein （FIS1）， optic atrophy protein 1 （OPA1）， mitochondrial outer membrane fusion protein 1 （MFN1）， and MFN2 were detected by real-time polymerase chain reaction （real-time PCR） and Western blot. ResultCompared with the sham operation group， the model group showed a decrease in serum SOD activity and an increase in MDA content. The opening level of mPTP， the level of △Ψm and ATP content decreased， the protein expressions of mitochondrial fission factors DRP1 and FIS1 increased， and the protein expressions and mRNA transcription levels of fusion related factors OPA1 and MFN1 decreased. Compared with the model group，SSNX significantly increased serum SOD activity， reduced MDA content， increased intracellular ATP level and △Ψm， reduced the opening level of mPTP， downregulated the protein expressions of mitochondrial fission factors DRP1 and FIS1， and increased the mRNA transcription levels and protein expressions of fusion related factors OPA1 and MFN1. ConclusionSSNX inhibits the expressions of mitochondrial fission factors DRP1 and FIS1， and increases the expressions of fusion related factors OPA1 and MFN1， inhibiting mitochondrial fission and increasing mitochondrial fusion， thereby alleviating MIRI.

Objective To design a mobile personnel radiation protection equipment for operation in environments with high radiation such as spent fuel reprocessing plants, to achieve simultaneous protection against γ radiation, neutron radiation, and radioactive aerosol, to reduce the internal and external exposure dose of radioactive workers, and to meet the requirement of operation for two hours. Methods The core parts of the mobile personnel radiation protection equipment included a shielding chamber and a respiratory maintenance system. An automated chassis was used for the movement and lifting of the shielding chamber. MCNP software was used to simulate and calculate the protective effects of shielding chamber made of different materials and material thicknesses. Experimental verification of the shielding chamber design was conducted. Mathematical models were established to describe the variations in the content of various gases in the chamber with personnel operation time. A respiratory maintenance system, a harmful gas absorption device, and an automated mobile chassis were designed. Results The shielding chamber made of polyethylene with a thickness of 80 mm achieved an 80% neutron shielding rate. The respiratory maintenance system could support workers for 2 hours of operation inside the equipment. The mobile chassis allowed operation of the equipment with one person. Conclusion This mobile personnel radiation protection equipment can solve the problem in simultaneous protection against γ radiation, neutron radiation, and radioactive aerosol. The equipment can provide radiation protection for radioactive workers, reduce exposure dose, and reduce personnel burden. This system provides technical means for the operation and maintenance of equipment in high-radiation sites such as spent fuel reprocessing plants.

OBJECTIVE To investigate the diagnostic efficacy of serum calcitonin(Ctn)in medullary thyroid cancer(MTC),the correlation between preoperative serum Ctn and clinicopathological features,and the risk factors affecting the progression of MTC disease during follow-up.METHODS The clinical data of 50 patients admitted to the Hospital of Integrated Traditional Chinese and Western Medicine of Nanjing University of Chinese Medicine from 2011 to 2022 were systematically reviewed,the ROC curve calculated the diagnostic efficacy of Ctn and CEA levels on MTC,and the risk factors for lymph node metastasis in the central region of MTC were analyzed in univariate and multivariate,and the survival curve without disease progression was drawn to predict risk factors.RESULTS The ROC curve yields the preoperative cut-off value of Ctn was 23.81 pg/ml and the cut-off value of CEA was 3.035 ng/ml for the diagnosis of MTC.The age of disease,tumor diameter,and preoperative serum Ctn and CEA levels in MTC patients were higher than those in non-MTC patients.Ctn≥289.62 pg/ml was an independent risk factor for central lymph node metastasis in MTC.The survival curve showed that invasion of the capsule,central region metastasis,and TNM stage above T2 were risk factors for predicting disease progression(P<0.05).Patients with MTC who have disease progression have higher preoperative Ctn.CONCLUSION Serum Ctn has important clinical value in the differential diagnosis,preoperative evaluation and postoperative follow-up of MTC.

Objective To investigate the multi spiral computed tomography(MSCT)characteristics of intraductal papillary neo-plasm of the bile duct(IPNB)and to distinguish the benign and malignant ones.Methods The MSCT and clinical data of 23 patients with IPNB confirmed by pathology were analyzed retrospectively.According to the pathology,they were divided into benign and malignant groups,including 12 cases of benign group(7 cases with low to medium grade intraepithelial neoplasia,and other 5 cases with high grade intraepithelial neoplasia)and 11 cases of malignant group with invasive carcinoma.All patients underwent plain and tri-phasic enhanced CT scans of upper abdomen.The enhanced scan included arterial phase,portal phase and delayed phase.The location,size,growth mode,enhancement type,invasion and metastasis,bile duct manifestations and bile duct stones were analyzed.Independent sample t-test was used to count the transverse diameter,longitudinal diameter and aspect ratio of tumor.Chi square test was used to compare the difference in other parameters between benign and malignant groups.Results There were no significant differences between benign and malignant IPNB groups in the location of the disease,the transverse diameter of the tumor,the dilatation of the bile duct and the presence of the stones(P>0.05).However,the significant differences in tumor growth mode,tumor longitudinal diameter and aspect ratio,enhancement type,invasion of bile duct wall and bile duct truncation were found(P<0.05).Conclusion Benign IPNB is common,while the IPNB with diffuse growth,progressive enhancement,invasion of bile duct wall and extrabiliary structures,and distant metastasis may indicate malignance,and the final diagnosis depends on the pathology.

BACKGROUND:The treatment of distal tibial fractures with soft tissue injury has always been challenging,and the new retrograde tibial nailing is a new choice.Up to now,there were few reports on the biomechanical properties between the new retrograde tibial nailing,anterograde intramedullary nailing and supercutaneous locking plate. OBJECTIVE:To explore the biomechanical stability of new retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate in the treatment of distal tibial fractures with soft tissue injury using finite element analysis so as to offer a scientific foundation for clinical application. METHODS:The finite element model of transverse distal tibia fracture was established by relevant software utilizing the CT data of the tibia from a 42-year-old healthy male.Retrograde tibial nailing,antegrade intramedullary nailing and supercutaneous locking plate finite element models were assembled under the principle of fracture fixation.Finally,meshing,applying loads,and data processing were accomplished with the ANSYS 2019 software.Moreover,the stress distribution and displacement of the tibia and internal fixation of each model were compared. RESULTS AND CONCLUSION:(1)The displacement of fracture end in the three groups increased with the increase of load.In all mode loads,the average displacement of the fracture end was the least in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the highest in the antegrade intramedullary nailing group.At 800 N vertical load,the displacement difference of the fracture end was statistically significant(P<0.05).There was no statistical significance in other load modes.(2)Under different loads,the tibial stress in the three groups was the highest in the middle of the tibia,and gradually decreased to the proximal and distal ends.The stress distribution of the tibial shaft was the highest in the retrograde tibial nailing group,followed by the supercutaneous locking plate group,and the least in the antegrade intramedullary nailing group.(3)Under different loads,the stress of the tibial stress raiser in the three groups was significantly higher in the supercutaneous locking plate group than in the other two groups,with statistical significance(P<0.05).(4)Under different loads,the stress of the fixators in the three groups was the largest in the supercutaneous locking plate group,followed by the retrograde tibial nailing group,and the minimum in the antegrade intramedullary nailing group.There were significant differences in the stress of fixator stress raiser among the three groups under different loading modes(P<0.05).(5)It is indicated that all three fixation methods have the good anti-rotation ability and axial stability.Retrograde tibial nail shows better biomechanical stability.

BACKGROUND:The treatment of distal tibial comminuted fractures with soft tissue injury has always been challenging.The new retrograde tibial nailing and supercutaneous locking plate are important treatment methods,but their strain and stress shielding at the fracture end during different periods of fracture healing and different load conditions have not been reported. OBJECTIVE:To explore the biomechanical stability of retrograde tibial nailing and supercutaneous locking plate in different periods of fracture healing by finite element analysis to offer a scientific foundation for clinical application and rehabilitation exercise. METHODS:The finite element model of distal tibial comminuted fracture was established by utilizing the CT data of the tibia from a 40-year-old healthy male.Retrograde tibial nailing,supercutaneous locking plate,and callus models were assembled in accordance with the principle of fracture fixation.The finite element analysis was performed using ANSYS software to compare the displacement of the fracture end,the stress shielding of the tibia,the stress of the callus,and the stress distribution of the tibia and the fixation device during different periods of fracture healing. RESULTS AND CONCLUSION:(1)The relative displacement of the tibial fracture decreased gradually with the healing of the fracture,and the displacement decreased significantly after 3 months.At 0 and 1 months after operation,the vertical displacement and total displacement of the supercutaneous locking plate group were higher than those in the retrograde intramedullary nail group.The Z-axis displacement(horizontal medial and lateral displacement)of the two fixation methods was more obvious than the X-axis and Y-axis,and the Z-axis displacement of supercutaneous locking plate group was the most obvious.The maximum Z-axis displacement of the two fixation methods was located on the outside of the tibia,and the minimum displacement was located on the inside of the tibia.(2)The stress shielding rate at different periods of fracture healing gradually decreased with time.The stress shielding rate of the retrograde intramedullary nail was higher than that of the supercutaneous locking plate at different stages of fracture healing.After 3 months,the stress shielding rate of the supercutaneous locking plate was reduced to about 4%,and the stress shielding rate of the retrograde intramedullary nail was reduced to about 40%.(3)The stress of the stress concentration site of the callus in the two fixation methods increased with the increase of the load,and the stress of the callus in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The maximum stress distribution of the callus was approximately equally distributed among the two modes of fixation,both in the lateral portion of the tibia.(4)As the fracture healed,the maximum stress of the tibia in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The average stress of the maximum stress area of the tibia in the supercutaneous locking plate group under 1 500 N load was 285 MPa,while that in the retrograde intramedullary nail group was 26 MPa.(5)As the fracture healed,the stress of the fixation device in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was significantly higher than that in the retrograde intramedullary nail group.After 3 months,the stress of the two fixation devices decreased significantly.(6)It is indicated that in the early stage of fracture healing,the strain on the fracture end in the retrograde intramedullary nail group is small,and the maximum stress of the tibia is moderate,allowing early loaded.The fractured ends in the supercutaneous locking plate group had too large strain and too large maximum stress of the tibia,which needed to be partially loaded under protection and could not be fully loaded.In the middle and late stages of fracture healing,the tibial retrograde intramedullary nail and the supercutaneous locking plate could be completely loaded,and the stress shielding rate of the supercutaneous locking plate was significantly lower than the tibial retrograde intramedullary nail.