Objective To compare the efficacy and safety of video-assisted thoracoscopic surgery (VATS) thymectomy for the treatment of thymoma through subxiphoid uniportal approach using double sternum retractors, and subxiphoid and subcostal arch approach. Methods We retrospectively analyzed the clinical data of the patients diagnosed with thymoma who underwent VATS thymectomy from June 2023 to June 2024 in West China Hospital. Patients were categorized based on the surgical approach into two groups: a subxiphoid uniportal VATS thymectomy (SUVT) group and a subxiphoid and subcostal arch VATS thymectomy (SASAT) group. Comparisons were made between the two groups regarding surgical duration, intraoperative blood loss, postoperative drainage, thymoma size and location, and postoperative pain assessed using the visual analogue scale (VAS). Results The SUVT group consisted of 20 patients, including 11 males and 9 females, with an average age of (51.5±14.3) years. The SASAT group comprised 40 patients, including 26 males and 14 females, with an average age of (50.0±13.0) years. Compared to the SASAT group, the SUVT group had significantly larger thymomas [ (5.9±2.7) cm vs. (4.2±2.1) cm, P=0.010] and a higher proportion of neoplasms located in the superior mediastinum (30.0% vs. 2.5%, P=0.007). Additionally, the VAS pain scores on postoperative days 3, 7, and 30 were significantly lower in the SUVT group compared to the SASAT group (P<0.05). There were no statistical differences between the two groups in demographic characteristics, operative time, intraoperative blood loss, duration and volume of postoperative drainage, length of postoperative hospital stay, or the VAS pain score on the first postoperative day. Conclusion SUVT using double sternum retractors significantly reduces postoperative pain and provides superior efficacy in the resection of larger thymomas or those situated in the superior mediastinum.

Objective To analyze the diagnostic quality of imported malaria in Hubei Province from 2019 to 2022, and to further improve the diagnostic level and consolidate the achievements in eliminating malaria. Methods The samples of reported malaria cases in Hubei were collected by the provincial reference laboratory (PRL) from 2019 to 2022. The microscopy and fluorescent PCR were performed to confirm the infection of plasmodium species of each case．The positive coincidence rate and species coincidence rate were analyzed and compared． Results A total of 257 imported malaria cases were reported in Hubei Province from 2019 to 2022. Among 229 malaria cases were confirmed, the overall coincidence for malaria diagnosis was 91.24% (229/251), and the overall coincidence rate for parasite species identification was 86.03% (197/229). The difference in species coincidence rate among different years was statistically significant (χ²=10.458, P<0.05). The coincidence rates of malaria diagnosis and parasite species identification in different cities (prefectures) of Hubei Province were 71.43% to 100.00% and 50.00% to 100.00%, respectively, with significant differences among different regions (χ²=29.283, P<0.05). The coincidence rates of malaria diagnosis and parasite species identification were 72.73% to 100.00% and 0.00% to 100.00% in different diagnostic institutions, and the coincidence rate of species identification in hospitals (87.61%) was higher than that in Centers for Disease Control institutions (54.55%) (χ²=81.275, P<0.05). The coincidence rates of Plasmodium falciparum, P. vivax, P. malariae, and P. ovale identification were 91.50%, 88.57%, 80.00%, and 58.06%, respectively (χ²=19.777, P<0.05). Conclusion The quality of the qualitative diagnosis of malaria cases reported online from 2019 to 2022 is generally high. However, the ability of Plasmodium typing needs to be improved. In the future, technical training and quality control should be strengthened to improve the malaria surveillance capability during the post-elimination stage.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Humans ; Acute Disease ; Pancreatitis/diagnosis* ; Follow-Up Studies ; Patient Discharge ; Disease Progression

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Objective:To investigate the impact of daily step count on glycemic outcomes in community residents with impaired glucose tolerance (IGT).Methods:This was a prospective cohort study, in October 2018, 204 residents who met the criteria of IGT were recruited in the Shijingshan District in Beijing. The subjects were tested for fasting blood glucose, oral glucose tolerance test 2-hour blood glucose (2hBG), glycated hemoglobin A 1c (HbA 1c), lipid profile, liver and kidney function, as well as measurements of height, weight and waist circumference. A dedicated mobile application was used to deliver prediabetes health knowledge monthly. Online guidance was provided to answer questions and daily step count was collected using the application. Three years later, a follow-up was conducted to assess the participants′ glycemic outcomes and other indexes, and a total of 142 participants completed the follow-up review. According to daily step count, the subjects were categorized into high step count group (42 cases,>7 000 steps daily), moderate step count group (54 cases, 5 000-7 000 steps daily), and low step count group (46 cases,<5 000 steps daily). Subjects were categorized into diabetes group (30 cases), prediabetes group (77 cases) and normal glucose tolerance group (35 cases) with glycemic outcomes. Independent sample t test was used to compare the differences in blood glucose, blood lipids, and step counts between the two groups. Kruskal-Wallis H test or one-way ANOVA was used to compare the differences in blood glucose, blood lipids, and step counts between multiple groups. The χ2 test was used to compare the differences in glycemic outcomes between multiple groups. Multivariate logistic regression analysis was used to assess the impact of daily step counts and body mass index on glycemic outcomes. Linear regression analysis was used to evaluate the relationship between daily step counts and 2 h BG. Results:A total of 142 participants completed the 3-year follow-up, including 43 males and 99 females, with a mean age of (60.15±5.67) years. At baseline, males had significantly higher body mass index, waist circumference, and fasting blood glucose when compared to those in females [(26.97±2.43) vs (24.89±2.93) kg/m 2, (92.68±7.75) vs (83.83±8.60) cm, (5.83±0.61) vs (5.62±0.52) mmol/L], the total cholesterol and HDL-C were also significantly lower in males than those in females [(5.10±1.16) vs (5.55±0.95) mmol/L, (1.35±0.34) vs (1.56±0.35) mmol/L] (all P<0.05). After 3-year follow-up, 21.1% (30/142) of IGT participants progressed to diabetes, with an annual conversion rate of approximately 7%. The normal glucose tolerance group showed significantly higher daily step counts when compared with the prediabetes and diabetes groups [(7 886±2 867) vs (5 981±2 655) vs (4 117±2 674) steps] ( H=31.778, P<0.001). Individuals with higher daily step counts exhibited lower body mass index, 2 h BG, and HbA 1c level when compared with those in the ones with moderate and low step counts [(24.26±3.09) vs (25.44±3.38) vs (26.26±3.59) kg/m 2, (7.50±1.71) vs (9.15±3.30) vs (11.19±3.84) mmol/L, 5.97%±0.46% vs 6.14%±0.99% vs 6.40%±0.96%] (all P<0.05). Higher step count was positively correlated with the reversal of prediabetes to normal blood glucose levels (moderate step count, OR=0.297, 95% CI: 0.109-0.804; low step count, OR=0.055, 95% CI: 0.010-0.287), lower daily step count correlated positively with prediabetes progressing to diabetes ( OR=4.857, 95% CI: 1.140-20.689) (all P<0.05). For every additional 1 000 steps per day, the 2 h BG decreased by 0.5 mmol/L. Conclusion:As daily step count increases, the glucose metabolism improves in IGT community residents. Higher daily step count is associated with reversal of IGT to normal glucose tolerance, while lower daily step count may be associated with the progression of IGT to diabetes.

AIM To evaluate the quality of Beidougen Formula Granules.METHODS Fifteen batches of standard decoctions and three batches of formula granules were prepared,after which paste rate and contents,transfer rates of magnoflorine,daurisoline,dauricine were determined.HPLC specific chromatograms were established,and cluster analysis was adopted in chemical pattern recognition.RESULTS For three batches of formula granules,the paste rates were 15.1%-16.6%,the contents of magnoflorine,daurisoline,dauricine were 18.93-19.39,9.42-9.60,6.79-6.85 mg/g with the transfer rates of 34.42%-35.25%,43.81%-44.65%,27.27%-27.51%from decoction pieces to formula granules,respectively,and there were seven characteristic peaks in the specific chromatograms with the similarities of more than 0.95,which demonstrated good consistence with those of standard decoctions and accorded with related limit requirements.Fifteen batches of standard decoctions were clustered into two types,and the medicinal materials produced from Jilin,Hebei,Shangdong could be used for the preparation of formula granules.CONCLUSION This reasonable and reliable method can provide references for the quality control and clinical application of Beidougen Formula Granules.

Objective To investigate the efficacy and safety of intravenous thrombolysis with low-dose and standard-dose recombinant tissue plasminogen activator(rt-PA)in the elderly patients(aged over 80 years)with acute ischemic stroke(AIS).Methods A total of 201 elderly patients with AIS treated at Tianjin Fourth Central Hospital from February 2019 to February 2023 were prospectively included and randomly assigned to the rt-PA low-dose group(n=93,0.6 mg/kg)and rt-PA standard-dose group(n=108,0.9 mg/kg).The incidence of intra-cranial hemorrhage,symptomatic intracranial hemorrhage,fatal intracranial hemorrhage,neurologic deterioration within 7 days and mortality within 90 days were observed to evaluate the safety.The neurologic improvement rate and good prognosis rate at 90 days were used to evaluate the effectiveness.A stratified analysis of 90-day outcomes was performed based on stroke severity and age.Results The incidence of intracranial hemorrhage,symptomatic intracranial hemorrhage and fatal intracranial hemorrhage within 7 days in rt-PA low-dose group was lower than that in rt-PA standard-dose group(P＜0.05).There were no statistically significant differences between the two groups concerning the residual safety index and the effectiveness index.The 90-day good prognosis rate of moderate stroke sub-group and of≥90 years of age sub-group in rt-PA low-dose group were both higher than that of rt-PA standard-dose group(P＜0.05).Conclusions For AIS patients with moderate stroke and aged over 90 years,intravenous thrombolytic therapy with rt-PA 0.6 mg/kg is recommended.

Digital polymerase chain reaction(dPCR)is a PCR technology that realizes accurate quantification of single-copy nucleic acid molecules by dividing the reaction system into tens of thousands of independent PCR reaction units for single-molecule-level amplification and integrating Poisson distribution.Due to its single-copy sensitivity and accurate quantification without the need of standard curves,dPCR has been widely used in disease diagnosis.By introducing technologies such as stepped emulsification and three-dimensional imaging,dPCR has been greatly improved in terms of accuracy,multiplexability and turnaround time,significantly enhancing its performance in clinical disease diagnosis.Based on this,this paper traced the technological development history of dPCR,gave an overview of its application in detection of tumors,infections and other diseases,and further discussed the challenges and opportunities of the development of dPCR,with the aim of providing a reference for the development and utilization of dPCR in the future,and promoting the high-quality development of molecular technology in clinical testing.

Objective To explore clinical effect of modified Chinese-way technique under shoulder arthroscopy in treating massive rotator cuff tears.Methods From January 2019 to June 2022,22 patients with massive rotator cuff tears who underwent arthroscopic rotator cuff repair with improved Chinese-way technique,including 10 males and 12 females,aged from 46 to 76 years old with an average of(64.14±7.45)years old;the courses of disease ranged from 5 to 14 months with an average of(8.32±2.42)months;19 patients were complete repaired,and 3 patients were partial repaired.Visual analogue scale(VAS)and University of California at Los Angeles(UCLA)scale were used to evaluate pain and function of shoulder joint preopera-tively and 1 year postoperatively.Postoperative complications,the integrity of reconstructed tissue structure and the size of sub-acromial space were observed.Results All patients were followed up from 12 to 34 months with an average of(17.14±5.93)months.Re-tear were occurred in 4 patients during MRI follow-up,but clinical symptoms of patients were improved significant-ly and they were satisfied with the treatment,the others were no complications such as incision infection,peripheral nerve in-jury,loosening and falling off of internal fixation anchors.Preoperative and 1 year after operation VAS were(8.05±1.12)and(1.82±1.50),UCLA scores were(7.45±1.65)and(31.41±2.87)respectively,and the difference was statistically significant(P＜0.05).Conclusion The modified Chinese-way technique under shoulder arthroscopy for the massive rotator cuff tear could relieve pain obviously and recovery postoperative function well,with satisfactory curative effect.