With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.

Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

Liver fibrosis is a chronic liver injury resulting from factors like viral hepatitis, autoimmune hepatitis, non-alcoholic steatohepatitis, fatty liver disease, and cholestatic liver disease. Liver transplantation is currently the gold standard for treating severe liver diseases. However, it is limited by a shortage of donor organs and the necessity for lifelong immunosuppressive therapy. Mesenchymal stem cells (MSCs) can differentiate into various liver cells and enhance liver function when transplanted into patients due to their differentiation and proliferation capabilities. Therefore, it can be used as an alternative therapy for treating liver diseases, especially for liver cirrhosis, liver failure, and liver transplant complications. However, due to the potential tumorigenic effects of MSCs, researchers are exploring a new approach to treating liver fibrosis using extracellular vesicles (exosomes) secreted by stem cells. Many studies show that exosomes released by stem cells can promote liver injury repair through various pathways, contributing to the treatment of liver fibrosis. In this review, we focus on the molecular mechanisms by which stem cell exosomes affect liver fibrosis through different pathways and their potential therapeutic targets. Additionally, we discuss the advantages of exosome therapy over stem cell therapy and the possible future directions of exosome research, including the prospects for clinical applications and the challenges to be overcome.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

ObjectiveTo establish a geographical origin identification model for Foeniculi Fructus from Haiyuan， providing a new technical reference for the protection of Haiyuan's geo-authentic medicinal materials and its designation as a national geographical indication agricultural product. MethodsSamples of Foeniculi Fructus were collected from eight producing areas， including Minqin （Gansu）， Bozhou （Anhui）， Qingdao （Shandong）， Dezhou （Shandong）， Urumqi （Xinjiang）， Nujiang （Yunnan）， Gutuo （Inner Mongolia）， and Haiyuan （Ningxia）. Gas chromatography-ion mobility spectrometry （GC-IMS） was used to detect the volatile organic compounds （VOCs） in samples from these geographic origins. VOCs were qualitatively analyzed through dual matching with the National Institute of Standards and Technology （NIST） mass spectral database and the IMS drift time database. Using the Reporter module and Gallery Plot visualization tools within the LAV analytical platform， VOC fingerprint profiles characterizing geographic origins were constructed. A non-targeted analytical strategy was adopted， and 97 VOCs detected via GC-IMS were subjected to principal component analysis （PCA） and partial least squares discriminant analysis （PLS-DA） based on their differential distribution patterns to construct an origin identification model for Foeniculi Fructus from Haiyuan region. Key discriminative markers were screened using variable importance in projection （VIP） values greater than 1. ResultsA total of 97 VOCs were identified， including alcohols， aldehydes， ketones， esters， organic acids， terpenoids， ethers， alkenes， and benzenes. The PLS-DA model， based on VOCs data obtained by GC-IMS， effectively distinguished Foeniculi Fructus in Haiyuan region from those of other origins. During cross-validation， the model achieved a prediction parameter （Q²） of 0.976 and a goodness-of-fit parameter （R²） of 0.936， with no overfitting observed in permutation testing. Twelve key flavor markers with VIP > 1 were identified as characteristic indicators of Haiyuan origin. ConclusionA stable and highly predictive origin identification model for Foeniculi Fructus from Haiyuan was successfully established using GC-IMS technology， PLS-DA， and VIP-based marker screening. This model provides a novel technical strategy for accurately distinguishing Foeniculi Fructus in Haiyuan region from other regional varieties and offers new technical support for its protection as a geo-authentic medicinal material and a nationally designated geographical indication agricultural product in China.

ObjectiveTo explore the possible mechanism of Osteoking （OK） on postmenopausal osteoporosis （PMOP）. MethodForty adult female mice were randomly divided into a sham operation （Sham） group， osteoporosis model （OVX） group， estradiol intervention （E₂） group， and OK group， with 10 mice in each group. The modeling was completed by conventional back double incision ovariectomy， and the corresponding drugs were given one week later. After 12 weeks， the body mass and uterine index of mice were measured， and the pathological changes of bone tissue and the number of osteoclasts （OCs） were determined by hematoxylin-eosin （HE） and tartrate-resistant acid phosphatase （TRAP） staining， respectively. Bone mineral density （BMD）， trabecular number （Tb.N）， trabecular separation （Tb.Sp）， and bone volume fraction （BV/TV） were measured by microcomputed tomography （Micro-CT）. The maximum load of the femur was detected by a three-point bending test. The contents of tumor necrosis factor-α （TNF-α） and bone resorption marker C-terminal telopeptide of type Ⅰ collagen （CTX-1） were measured by enzyme linked immunosorbent assay （ELISA）. The protein expression levels of nuclear factor-kappa B p65 （NF-κB p65）， phosphorylated nuclear factor-kappa B p65 （p-NF-κB p65）， nuclear factor kappa B inhibitor alpha （IκBα）， phosphorylated nuclear factor kappa B alpha （p-IκBα）， nuclear factor of activated T cells 1 （NFATc1）， and proto-oncogene （c-Fos） were detected by Western blot. The mRNA expressions of OCs-related specific genes matrix metalloproteinase-9 （MMP-9）， NFATc1， TRAP， cathepsin K （CTSK）， and c-Fos were detected by real-time fluorescence quantitative polymerase chain reaction （Real-time PCR）. ResultCompared with the Sham group， the uterine index decreased significantly in the OVX group， and the body mass （BMI） increased significantly. The structure of bone trabeculae was completely damaged， and the number of OCs increased. BMD， Tb.N， BV/TV， and maximum load decreased， while Tb.Sp was up-regulated. The levels of TNF-α and CTX-1 in serum were up-regulated. The protein expressions of c-Fos， p-NF-κB p65/NF-κB p65， NFATc1， and p-IκBα/IκBα were increased. The mRNA expressions of NFATc1， c-Fos， CTSK， TRAP， and MMP-9 were up-regulated （P<0.05， P<0.01）. Compared with the OVX group， the body mass of the OK and E₂ groups decreased， and the uterine index increased. The bone trabeculae increased， and the number of OCs decreased. BMD， Tb.N， BV/TV， and maximum load increased， while Tb.Sp decreased. The levels of TNF-α and CTX-1 in serum were decreased. The protein expressions of c-Fos， p-NF-κB p65/NF-κB p65， NFATc1， and p-IκBα/IκBα were decreased， and the mRNA expressions of NFATc1， c-Fos， CTSK， TRAP， and MMP-9 were decreased （P<0.05， P<0.01）. ConclusionOK can inhibit the NF-κB/NFATc1 signaling pathway and reduce bone mass loss by reducing the level of inflammatory injury factors in PMOP mice， which is one of the mechanisms for treating PMOP.

BACKGROUND:With the innovation of examination technique,the number of patients with spinal metastases in different stages is increasing year by year.Percutaneous vertebroplasty is an important treatment for spinal metastases;however,there is no report on the biomechanical effect in different stages and different activities after operation. OBJECTIVE:To simulate thoracic T10 bone stress and displacement of the different locations of the tumor metastasis based on the three-dimensional finite element model. METHODS:According to thoracic three-dimensional CT images of a 30-year-old healthy male,Mimics software was used to construct a three-dimensional geometric model of thoracic vertebrae(T9-T11),including ribs,ligaments and intervertebral discs.Three-dimensional models of T9-T11 vertebral bodies and different parts of the posterior thoracic vertebrae invaded by thoracic metastatic tumors were simulated,including the control group with intact vertebral structure,unilateral metastasis involving the vertebral body area(experimental group 1),unilateral metastasis involving the vertebral body and pedicle area(experimental group 2),unilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 3),and bilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 4).Abaqus software was used to create a three-dimensional finite element model.The von Mises stress distribution and the displacement of the model were analyzed under the loading condition,buckling condition,extension condition,and rotation condition. RESULTS AND CONCLUSION:(1)In the study of the maximum total displacement of loading points in different experimental groups under loading,flexion,extension,and rotation conditions,with the increase of metastatic tumor invasion site and invasion surface,the total displacement of loading points increased,and the overall stiffness decreased,especially the total displacement of loading points in experimental group 4 was the largest.(2)Under flexion condition,the maximum Von Mises stress value increased significantly after vertebral body and pedicle destruction,while the maximum Von Mises stress value was almost unchanged when the thoracocostal joint destruction was added.(3)On the basis of finite element analysis and simulation of bone tumor model,the elements in the bone cement region were set as a single set,and the bone cement region was set as the corresponding material properties to simulate bone cement filling.The results showed that the maximum total displacement under loading,flexion,extension,and rotation conditions was less than that of each experimental group.(4)The maximum stress values of the simulated percutaneous vertebroplasty patients in the loading,flexion,extension and rotation conditions were significantly lower than those of the femoral model.(5)It is concluded that the three-dimensional finite element model based on thoracic T9-T11 conducive to the biomechanics characteristics of thoracic vertebrae tumor metastasis,and on the basis of the thoracic vertebrae tumor metastasis model can accurately simulate load point after percutaneous vertebral body under different conditions of total displacement and the maximum Von Mises stress situation.