BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.

Objective: To analyse the expression of differential mRNA in the plasma exosomes in patients with latent tuberculosis infection (LTBI) and active tuberculosis (ATB) using high-throughput sequencing, so as to provide insights into differential diagnosis of LTBI and ATB. Methods: The plasma samples were collected from the patients treated at The Affiliated Hospital of Hangzhou Normal University, including 16 cases of LTBI and 21 cases of ATB. The exosomes were extracted by Invitrogen extracellular extracts purification kit, and the size and morphology of exosomes were observed by transmission electron microscope (TEM). The exosomes were identified by Western blotting. Total RNA was extracted from plasma exosomes using high-throughput sequencing, differential expression mRNA was identified, and gene ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis were performed. Two differential mRNAs with the highest differential expression fold were selected, and five patients with ATB and three patients with LTBI were recruited for verification using real-time quantitative PCR. Results: The sequencing results of plasma exosomes showed that compared with ATB patients, 2 875 differentially expressed mRNAs were detected in exosomes of LTBI patients, of which 1 002 mRNAs were up-regulated and 1 873 mRNAs were down-regulated. The most significant differentially expressed downregulated and upregulated mRNA were M6PR and RGPD5, respectively. GO analysis and KEGG pathway analysis showed that differential mRNAs were enriched in protein serine kinase activity, rRNA binding molecular function, human cytomegalovirus infection, pancreatic cancer, endometrial cancer, insulin signaling pathway and FoxO signaling pathway. The real-time quantitative PCR showed that the expression of differential mRNA was consistent with sequencing. Compared with ATB patients, the relative expression level of M6PR in plasma exosomes in LTBI patients (0.954±0.212) was downregulated compared with that of ATB patients (2.168±0.226), while the relative expression level of RGPD5 (2.126±0.200) was upregulated compared with that of ATB patients (0.588±0.129) (both P<0.05). Conclusions There is a difference in mRNA expression of plasma exosomes between patients with LTBI and ATB. M6PR and RGPD5 may become markers for distinguishing plasma exosomes between LTBI and ATB.

To explore the value of portable oto-endoscopy system in clinical teaching of otolaryngology residents.

Objective:To learn about physicians’ concepts and commonly employed method in hyaluronic acid injection and provide reference data for the standardization of pain management.Methods:This study was a cross-sectional study. Convenient sampling method was used to distribute questionnaires to cosmetic injectors and patients experienced with hyaluronic acid injections to collect data on their views of pain associated with hyaluronic acid injections. The physician portion was collected offline from June 15 to July 20, 2022, and the patient portion was collected from November 14, 2022, to December 6, 2022, via the Questionnaire Star platform. The physician questionnaire consisted of 17 questions, question types included single choice, multiple choice and essay questions. The patient questionnaire consisted of 6 questions, question types included single choice and multiple choice. Relevant data were analyzed using SPSS 22.0 software for descriptive statistics, and data were presented in the form of cases and percentages (%).Results:Sixty-two physician questionnaires and 123 patient questionnaires were collected. 42 (67.74%) physicians observed from their daily practice that more than 50% of their patients were very concerned about pain during injection; 101 (82.11%) patients scored ≥5 out of 10 for concern about impending pain prior to hyaluronic acid filler injection. At the time of treatment, 48 (77.42%) physicians advised patients to choose a lidocaine-containing hyaluronic acid filler for reasons including a significant reduction in injection pain (53 cases, 85.48%) and patient comfort with the treatment experience (59 cases, 95.16%). 60 (48.78%) patients were willing to choose an anesthesia-containing product at the time of injection, but the price of the anesthesia-containing product influenced the patient’ s choice (55 cases 44.72%) .Conclusions:Pain from cosmetic injectable treatments is an important issue to both physicians and patients. Lidocaine-containing hyaluronic acid is recognized by physicians and patients for its analgesic effect and high safety profile. There is no perfect solution for pain in cosmetic injection treatment, and multidisciplinary collaboration may be needed to solve the problem.

Objective:To learn about physicians’ concepts and commonly employed method in hyaluronic acid injection and provide reference data for the standardization of pain management.Methods:This study was a cross-sectional study. Convenient sampling method was used to distribute questionnaires to cosmetic injectors from plastic surgery department of public hospitals or medical beauty institutions and patients experienced with hyaluronic acid injections to collect data on their views of pain associated with hyaluronic acid injections. The physician portion was collected offline from June 15 to July 20, 2022, and the patient portion was collected from November 14 to December 6, 2022, via the Questionnaire Star platform. The physician questionnaire consisted of 17 questions, question types included single choice, multiple choice and essay questions. The patient questionnaire consisted of 6 questions, question types included single choice and multiple choice. Relevant data were analyzed using SPSS 22.0 software for descriptive statistics, and data were presented in the form of cases(%).Results:Sixty-two physician questionnaires and 123 patient questionnaires were collected. 42 (67.74%) physicians observed from their daily practice that more than 50% of their patients were very concerned about pain during injection; 101 (82.11%) patients scored ≥5 out of 10 for concern about impending pain prior to hyaluronic acid filler injection. At the time of treatment, 48 (77.42%) physicians advised patients to choose a lidocaine-containing hyaluronic acid filler for reasons including a significant reduction in injection pain (53 cases, 85.48%) and patient comfort with the treatment experience (59 cases, 95.16%). 60 (48.78%) patients were willing to choose an anesthesia-containing product at the time of injection, but the price of the anesthesia-containing product influenced the patient’s choice (55 cases, 44.72%).Conclusion:Pain from cosmetic injectable treatments is an important issue to both physicians and patients. Lidocaine-containing hyaluronic acid is recognized by physicians and patients for its analgesic effect and high safety profile. There is no perfect solution for pain in cosmetic injection treatment, and multidisciplinary collaboration may be needed to solve the problem.

Objective To analyze the impact of patients ages on propofol dosage in painless gastroscopy.Methods A retrospective analysis was conducted on the clinical data of 158 painless gastroscopy patients from January 2017 to June 2020.They were divided into the young group(18～44 years old,n = 57),the middle-aged group(45～59 years old,n = 51),and the elderly group(≥60 years old,n = 50)based on their age.The anesthesia status and safety of each group were compared.Results The results showed that the dosage of propofol,average total dosage of propofol,MAP,HR,RR,SpO2 levels in the young group were higher than those in the middle-aged and elderly groups when consciousness disappeared,and the middle-aged group was higher than the elderly group;The onset time,anesthesia recovery time,orientation recovery time,and departure time in the young group of patients were shorter than those in the middle-aged and elderly groups,and the middle-aged group was shorter than the elderly group(P<0.05).The incidence of airway obstruction,hypoxemia,mandible support,mask ventilation,adverse cardiovascular events,sedation related adverse events,and incidence of obstructed endoscopy in the elderly group were higher than those in the young and middle-aged groups.The incidence of smooth endoscopy was lower than that in the young and middle-aged groups(P<0.05).Conclusion Aging may increase the dosage of propofol in patients underwent painless gastroscopy under anesthesia,prolong the onset time,anesthesia recovery time,orientation recovery time,and departure time,increase stress reactions and adverse reactions,and strengthen monitoring for elderly patients in clinical practice.

Tracheostomy is a very common airway procedure in the treatment of critically ill neurological patients. At present, the traditional tracheal cannula fixation belt is easy to be contaminated, difficult to disinfect, and needs to be replaced regularly. It is prone to infection, skin injury, unplanned extubation and other adverse events, which cannot meet the clinical treatment effect and patient safety management. In order to overcome the above problems, the medical staff of the neurology intensive care unit of Henan Provincial People's Hospital designed a new type of tracheal cannula fixation belt to increase patient comfort and reduce complications, and obtained a National Utility Model Patent of China (ZL 2022 2 0855188.8). The main structure of the device includes a following shaped bending plate, a fastening belt, a locking pin, and a distance adjustment hole. The left and right sides of the shaped bending plate are equipped with fastening belts with breathable and anti-wear pads. The inner side of the left fastening belt is equipped with two sets of locking pins, and the outer surface of the right fastening belt and breathable and anti-wear pad is equipped with multiple sets of distance adjustment holes. Additionally, the back of the shaped bending plate is equipped with breathable buffer pads. The fastening belt can drive the following bending plate to stick tightly to the patient's neck. The operator installs the locking pin card into the distance adjustment hole according to the "one back" principle, and the fastening belts on both sides fix the device with the cooperation of the locking pin, greatly reducing the probability of excessive displacement of the tracheal tube during use, effectively improving the fixation effect of the device, strengthening the adaptability of the device to different personnel, and thus enhancing the practicality of the device. The new type of tracheal cannula fixation band is convenient, safe and efficient, which can increase patient comfort, reduce complications. It has certain clinical value and is suitable for clinical promotion.

Objective To establish a method for HPLC fingerprint analysis and determine three main components of Modified Zengye Decoction.Methods The chromatographic column was Shimadzu WondaSil C18 column(250 mm×4.6 mm,5 μm),the mobile phase was acetonitrile-0.3％aqueous phosphoric acid with a gradient elution procedure,the volume flow rate was 1.0 mL/min,the detection wavelengths were 265,203,310 and 290 nm,the column temperature was 25 ℃,and the injection volume was 20 μL.The HPLC fingerprints of the 10 batches of Modified Zengye Decoction were established,and the similarity analysis was performed by using the similarity evaluation system of chromatographic fingerprint of traditional Chinese medicine(version 2012A).The common peaks were identified and assigned,and the contents of the three main components were quantitatively determined.Results There were 17 common peaks in the fingerprints of 10 batches of Modified Zengye Decoction with similarities ranging from 0.872-0.989.The fingerprints recognized peak 9,14 and 17 as ferulic acid,aurantiamarin and harpagoside,respectively.The contents of ferulic acid,aurantiamarin and harpagoside were 0.067 3-0.174 8,0.498 8-1.522 7,0.270 9-0.802 4 mg/g,and the transfer rate were 30.74％-55.63％,11.77％-35.94％,23.15％-68.56％,respectively.Conclusion The established HPLC fingerprint analysis method combined with main components quantitative analysis method can be used for the quality analysis and control of Modified Zengye Decoction with simple analysis method and reliable results.