Objective: To investigate the distribution of pupil diameter and its association with myopia in school age children, providing ideas into the mechanisms of the role of pupil diameter in the onset and development of myopia. Methods: Adopting a combination of stratified cluster random sampling and convenience sampling method, 3 839 children from six schools in Shandong Province were included in September 2021. Pupil diameters distribution was analyzed by age, sex, and myopic status. Pearson correlation analysis was used to assess the relationship between pupil diameter and cycloplegic spherical equivalent (SE), as well as axial length (AL) and other variables. Propensity score matching (PSM) was applied to match myopic and non myopic children at a 1∶1 ratio based on age and sex. A generalized linear model (GLM) was constructed with pupil diameter as the dependent variable to identify independent factors influencing pupil size and its association with myopia. Results: The mean pupil diameter of school age children was (5.77±0.80)mm. Pupil diameter exhibited a significant increasing trend with age ( F =49.34， P trend ＜ 0.01). Myopic children had a significantly larger mean pupil diameter [(6.10±0.73)mm] compared to non myopic children [(5.62±0.79)mm] with a statistically significant difference( t=18.10, P <0.01). Multivariable GLM analysis, adjusted for age, amplitude of accommodation, and uncorrected visual acuity, revealed a negative correlation between pupil diameter and cycloplegic SE (before PSM: β =-0.089, after PSM: β =-0.063, both P ＜0.01). Conclusions Myopic school age children exhibite larger pupil diameters than their non myopic counterparts. Pupil diameter may serve as a potential indicator for monitoring myopia development in school age children.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

Objective:To analyze the influencing factors of low liver regeneration in patients with hilar cholangiocarcinoma (HCCA) after portal vein embolization (PVE).Method:Clinical data of 62 patients with HCCA undergoing PVE at Henan Provincial People's Hospital (People's Hospital of Zhengzhou University) from January 2019 to March 2024 were retrospectively analyzed, including 33 males and 29 females, aged (59.1±10.3) years. Patients were divided into two groups based on the median regeneration rate of remnant liver volume (28.6%) three weeks after PVE: low regeneration ( n=31, <28.6%) and high regeneration group ( n=31, ≥28.6%). The proportion of lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, alkaline phosphatase (ALP), and tumor necrosis factor-α (TNF-α) were compared between two groups. Multivariate logistic regression analysis was used to indentify the influencing factors of low liver regeneration in patients with HCCA after PVE surgery. Results:The proportion of lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, ALP, and level of TNF-α were higher in the low regeneration group than those in the high regeneration group (all P<0.05). Multivariate logistic regression analysis showed that patients with regional lymph node metastasis ( OR=2.561, 95% CI: 1.265-5.185), history of alcohol consumption ( OR=2.616, 95% CI: 1.321-5.181), liver fibrosis ( OR=2.351, 95% CI: 1.265-4.369), biliary tract infection ( OR=2.461, 95% CI: 1.226-4.940), elevated level of ALP ( OR=2.687, 95% CI: 1.351-5.344), and elevated level of TNF-α ( OR=2.781, 95% CI: 1.452-5.326) had an increased risk of low liver regeneration after PVE (all P<0.05). Conclusion:Regional lymph node metastasis, history of alcohol consumption, liver fibrosis, biliary tract infection, and elevated ALP and TNF-α are risk factors for low liver regeneration in patients with HCCA after PVE surgery, which should be noted in clinical practice.

Objective:To evaluate the impact of orthopedic robotic assistance and conventional freehand methods on surgical strategies, the safety of pedicle screw placement, and clinical efficacy in patients with upper cervical spine diseases.Methods:From January 2017 to March 2023, a total of 63 cases with upper cervical spine disease, were divided into two groups based on the screw placement technique: the robot-assisted pedicle screw placement (RA) group (41 cases) and the conventional freehand pedicle screw placement (CF) group (22 cases), were retrospectively included. These patients in the RA and CF groups underwent two types of posterior cervical surgery, including occipitocervical fusion (9 cases and 8 cases) and fixation and fusion of atlantoaxial and distal vertebrae (32 cases and 14 cases). The outcome parameters, including the disease course, surgical time, intraoperative blood loss, fluoroscopy frequency, radiation dose, hospital stay, treatment costs, complications, the rate of the pedicle screw placement, accuracy of upper cervical pedicle screw placement, and the risk factors that possibly affected the accuracy were recorded and analyzed. Postoperative follow-up was conducted for at least 6 months, and the efficacy of patients was assessed using imaging parameters, ASIS classification, VAS, and JOA scores.Results:Both groups had no screw-related complications and no spinal cord or vertebral artery injuries. In the RA group, the pedicle screw placement rates for the patients with occipitocervical fusion, and fixation and fusion of atlantoaxial and distal vertebrae were 100% (48/48) and 89.6% (138/154), respectively, far exceeding the placement rate in the CF group 42.9% (18/42) and 78.3% (54/69) (χ 2=37.403, P<0.001; χ 2=5.128, P=0.024). The fluoroscopic exposure dose and operation time of the two types of surgical patients in the RA group were both higher than those in the CF group ( P<0.05). Compared with the CF group, the accuracy of C 1 screws in the RA group increased from 42% (11/26) to 80% (51/64), with statistical significance (χ 2=13.342, P=0.004); while the accuracy of C 2 screws improved from 77% (33/43) to 88% (63/72) with no statistical difference (χ 2=2.863, P=0.413). Non-parametric correlation analysis found a significant correlation between the accuracy of C 1 and C 2 pedicle screw placement and the order of guide wire insertion in the RA group ( r=0.580, P<0.001; r=0.369, P=0.001). Postoperatively, both groups showed significant differences in cervicomedullary angle (CMA), Chamberlain angle (CL), McGregor angle, Boogard angle, Bull angle, clivus-canal angle (CCA), occipitocervical (C 0-C 2) angle, posterior occipitocervical angle (POCA), C 2-C 7 angle, and anterior atlantodental interval (ADI) ( P<0.05). The ASIA classification improved to varying degrees for both groups postoperatively, but there were no statistically significant differences between preoperative, postoperative, and last follow-up evaluations. VAS and JOA scores significantly improved for both groups postoperatively and at the last follow-up ( P<0.05). Conclusion:Both orthopedic robotic-assisted and conventional freehand pedicle screw placement techniques achieved satisfactory therapeutic effects in the treatment of upper cervical spine diseases. The orthopedic robot can effectively ensure the accuracy of upper cervical pedicle screw placement, the increase placement rate of pedicle screws in the upper cervical spine, and reduce fluoroscopy exposure. However, it is necessary to avoid the vertebral displacement caused by the priority insertion of the guide needle, which may affect the accuracy of subsequent planning.

Background The converter stations of high-voltage direct current (HVDC) transmission lines generate special total electric fields. At present, few investigations have been conducted on total electric fields in the workplace of converter stations from an perspective of occupational health. Objective To understand the current situation of total electric field strength in the workplace of converter stations. Methods Using purposive sampling, a calibrated HDEM-1 direct current (DC) total electric field strength measurement system was used to measure the total electric fields of 12 converter stations serving 6 DC lines in Southeast and Southwest China according to the Measurement method for total electric field strength and ion current density of the converter stations and DC transmission lines (DL/T 1089—2008). The results were evaluated according to occupational exposure limits recommended by The limits of electromagnetic environment at ±800 kV UHV DC converter station (DL/T 275—2012), the American Conference of Governmental Industrial Hygienists (ACGIH), and the International Commission on Non-Ionizing Radiation Protection (ICNIRP). Results A total of 615 check points were planned, the total electric field strength was 0.05-37.05 kV·m⁻¹, and the median was 10.45 kV·m⁻¹. The total electric field strength of 39 check points (6.3%) exceeded 25 kV·m⁻¹ (the limits of ACGIH and ICNIRP), and the total electric field strength of 12 check points (2.0%) exceeded 30 kV·m⁻¹ (the limit of DL/T 275—2012). There were statistically significant differences in the total electric field strength values and the proportions of exceeding 25 kV·m⁻¹ between the neutral regions and the positive regions and between the neutral regions and the negative regions (P < 0.01). The proportion of total electric field strength exceeding 30 kV·m⁻¹ in the negative regions was higher than that in the positive regions (P < 0.01). There were no significant differences in the total electric field strength of converter stations at different voltage levels and different altitudes (P > 0.05). There were no significant differences in the proportions of total electric field exceeding 25 kV·m⁻¹ and exceeding 30 kV·m⁻¹ in converter stations at different voltage levels and different altitudes (P > 0.05). Conclusion The total electric field in some workplace of converter stations exceeds selected limits. Converter station operators may be exposed to high-strength total electric field for a short time.

Objective To investigate the application value of pre-implantation genetic testing(PGT)in patients with Turner syndrome.Methods The clinical data,embryonic development,PGT results and pregnancy outcome of 18 patients with Turner syndrome who underwent PGT in the reproductive center of 900th Hospital from January 2016 to June 2023 were retrospectively analyzed.Results All 18 patients had spontaneous puberty development,of which 4 patients had primary ovarian insufficiency(POI).A total of 24 oocyte retrieval cycles were performed in 18 patients,of which 6 patients had no biopsied embryos for 10 cycles.Sixty-one embryos were biopsied and 60 embryos were clearly diagnosed,including 25 with chromosomal abnormalities.Seven patients with mosaic Turner syndrome obtained clinical pregnancies after transplantation,including 4 healthy boys had already been delivered and 3 are in pregnancy.Conclusion There are numerous types of karyotype in Turner syndrome.The clinical phenotypes vary greatly in individuals with Turner syndrome,and prognosis of PGT is significant different.Patients with Turner syndrome who had biopsied embryos can obtain available embryo using PGT,and achieve ideal clinical outcomes.

Bone defects caused by different causes such as trauma, severe bone infection and other factors are common in clinic and difficult to treat. Usually, bone substitutes are required for repair. Current bone grafting materials used clinically include autologous bones, allogeneic bones, xenografts, and synthetic materials, etc. Other than autologous bones, the major hurdles of rest bone grafts have various degrees of poor biological activity and lack of active ingredients to provide osteogenic impetus. Bone marrow contains various components such as stem cells and bioactive factors, which are contributive to osteogenesis. In response, the technique of bone marrow enrichment, based on the efficient utilization of components within bone marrow, has been risen, aiming to extract osteogenic cells and factors from bone marrow of patients and incorporate them into 3D scaffolds for fabricating bone grafts with high osteoinductivity. However, the scientific guidance and application specification are lacked with regard to the clinical scope, approach, safety and effectiveness. In this context, under the organization of Chinese Orthopedic Association, the Expert consensus for the clinical application of autologous bone marrow enrichment technique for bone repair ( version 2023) is formulated based on the evidence-based medicine. The consensus covers the topics of the characteristics, range of application, safety and application notes of the technique of autologous bone marrow enrichment and proposes corresponding recommendations, hoping to provide better guidance for clinical practice of the technique.

Objective: To analyze the status of noise hazard in workplace of key industries in Guangdong Province. Methods: A total of 1 061 enterprises from 14 key industries in 21 prefecture-level cities in Guangdong Province were selected as the research subjects using stratified sampling method. The occupational health survey was carried out, and the noise intensity in the workplace was detected. Results: There were 12 606 workplaces and 5 570 work sites involved among 1 061 enterprises. The median and the 0-100th percentile value ［M (P₀-P₁₀₀)］ of noise intensity in workplace were 82.6 (46.5-112.6) dB(A), and 35.03% of the workplace exceeded the national noise intensity standard. The regions and industry with the highest rate of noise exceeded the national noise intensity standard in workplace were in the northern part of Guangdong and the stone processing industry respectively. The M (P₀-P₁₀₀) of noise intensity in the work sites was 83.7 (47.5-106.2) dB(A), and 36.00% of the work sites exceeded the national noise intensity standard. The regions and industry with the highest rate of noise exceeded the national noise intensity standard in work sites were in the Pearl River Delta region and the ferrous metal mining and dressing industry respectively. The rate of noise protection facilities setting was 66.45%, and the validity of personal protection was 61.73%. The occupational medical examination was performed in 73.24% of the research subjects, and 3.25% of the result was abnormal. The industry with the highest occupational medical examination rate was nonferrous metal smelting and rolling processing, and the industry with the highest abnormal rate of occupational medical examination was stone processing industry. Conclusion: Noise hazards in workplaces of key industries in Guangdong Province are relatively severe, necessitating strengthened supervision and management, noise control measures, and efforts to reduce noise exposure levels in workplaces and work sites.

Objective:To compare the characteristics of MSM with different types of primary sexual partners and to analyze the factors associated with MSM not being tested for HIV in the last six months.Methods:MSM were recruited in nine cities of Shandong Province from April to July 2021, and face-to-face questionnaires were conducted to collect information on sociodemographic characteristics, high-risk behaviors, and HIV testing of MSM. Blood samples were taken for serological tests of HIV and syphilis antibodies.Results:A total of 3 008 men who had anal sex with men in the last six months were divided into three groups according to the type of primary sexual partner in the last six months: the fixed sexual partner group (36.83%, 1 108/3 008), the commercial sexual partner group (3.06%, 92/3 008), and casual sexual partner group (60.11%, 1 808/3 008). There were statistically significant differences in the distribution of age, local residence time, education level, the primary place to find male sexual partners, use of new-type drugs in the last six months, consistent condom use every time during same-sex anal sex in the last six months, group sex in the last six months, no HIV testing in the last six months, having had a sexually transmitted disease in the last year, receiving peer education in the last year, and frequency of syphilis testing in the last year among different groups ( P<0.05). Multivariable logistic regression analysis showed that related factors of not being tested for HIV in the last six months in MSM were those aged less than 30 years old (a OR=1.39, 95% CI: 1.06-1.83), married/cohabiting (a OR=1.74, 95% CI: 1.39-2.16), high school education or less (a OR=1.39, 95% CI: 1.15-1.67), had not used new-type drugs in the last six months (a OR=2.27, 95% CI: 1.89-2.71), had not received peer education in the last year (a OR=1.59, 95% CI: 1.28-1.98), had never been tested for syphilis (a OR=11.30, 95% CI: 8.15-15.66), had not been tested in the last year but had been previously tested for syphilis (a OR=5.65, 95% CI: 4.19-7.62), the type of primary sexual partner in the last six months being a commercial sexual partner (a OR=1.80, 95% CI: 1.01-3.20), and the type of primary sexual partner in the last six months being a casual sexual partner (a OR=1.50, 95% CI: 1.26-1.80). Conclusions:The characteristics of MSM with different types of primary sexual partners are different, and the proportion of HIV testing still needs to be improved. In the future, we should make full use of the Internet and peer education to expand the coverage of HIV testing for MSM, targeting the characteristics of MSM with different types of primary sexual partners.