ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Objective To investigate the mechanism and protective effect of Humanin(HN)on rotenone(Rot)-induced toxic damage for dopamine neurons.Methods The Rot-poisened PC12 cell model was constructed,and the control group,the Rot poisening group,the HN pretreated Rot poisening group,and the HN treatment group were set up.ELISA was used to detect the content of HN inside and outside of Rot-infected cells,CCK-8 assay was used to detect cell viability,and ATP detection kit was used to detect the intracellular ATP content.Dichloro-dihydro-fluorescein diacetate(DCFH-DA)assay was used to detect the level of reactive oxygen species(ROS)in cells.Western blotting was performed to detect the expression level of mitochondrial autophagy regulatory proteins Pink1,Parkin,p62,LC3,mitochondrial biogenesis regulatory protein PGC1α,division/fusion regulatory proteins OPA1,MFN2,DRP1,p-DRP1 and antioxidant stress regulatory proteins Keap1 and Nrf2.HBAD-mcherry-EGFP-LC3 adenovirus transfected cells was used to observed the number of autophagosomes and autophagolysosomes.Results The results showed that the intracellular concentration of HN in PC12 in the Rot poisening group was significantly higher than that in the control group(P＜0.05);Compared with the control group,the Rot poisening group had significantly decreased activity of PC12 cells,decreased ATP content and increased production of ROS.After the poisen of Rot in PC12 cells,the expression of Pink1 and p-Parkin,the ratio of LC3Ⅱ/LC3Ⅰ and the expression of p-DRP1 in mitochondrial fusion protein was increased,while the expression of p62,the expression of mitochondrial biogenesis protein PGC1 α,mitochondrial fusion proteins MFN2 and OPA1,and antioxidant stress proteins Keap1 and Nrf2 were decreased(all P＜0.05).The number of autophagosomes and autophagolysosomes in PC12 cells in the Rot poisening group was higher than that in the control group(P＜0.05),and HN pretreatment(20 μmol/L)could significantly improve the changes mentioned above caused by Rot poisening(P＜0.05).Conclusion HN ameliorates Rot-induced toxic damage for dopamine neurons by inhibiting mitophagy and mitochondrial division and promoting mitochondrial biogenesis and fusion,and anti-oxidative stress.

Objective:To explore the application value of renal artery resistance index in the diagnosist of intra-abdominal hypertension (IAH) in critically ill patients.Methods:89 patients with risk factors of IAH in the intensive care unit of Zhangzhou Hospital Affiliated to Fujian Medical University from February 2022 to June 2022 were retrospective analyzed. The intra-abdominal pressure (IAP) were measured by bladder, and patients divided into IAH group (IAP≥12 mmHg) and non-IAH group (IAP <12 mmHg). The resistance index (RI) of the right renal aorta, segment artery and interlobar artery were measured by color Doppler ultrasound. The difference between the measurement indicators of patients in the IAH and non-IAH groups and the correlation with IAP were analyzed. As for different indicators to predict the diagnostic efficacy of IAH, ROC curve analysis was used to evaluate the effect. And further multivariate logistic regression analysis was to find independent risk predictor.Results:A total of 89 patients were included in the study, including 44 patients with normal IAP and 45 patients diagnosed IAH. There were significant differences in the right renal aorta, segmental artery and interlobar artery RI (all P<0.01). The interlobar artery RI≥0.698 was the highest diagnostic cut-off,area under the curve was 0.914, sensitivity was 82.2%, specificity was 97.7%, and Jordon index was 0.799. The Spearman correlation analysis of IAP and the ultrasonographic measurements revealed a strong correlation between right renal interlobar artery RI and IAP ( r=0.741, P<0.01). The multivariate logistic regression analysis showed that the right renal interlobar artery RI ( OR= 24.472, 95% CI:5.122~116.919, P<0.01) was an independent risk predictor of IAH ( P<0.01). Conclusion:Right renal interlobar artery RI had better diagnostic efficacy of IAH,renal ultrasound could be used as an alternative, non-invasive technique for the diagnosis and follow-up of IAH.

Objective To obtain the monitoring measurement range of quality indicators of red blood cells,plasma and derivatives and leukocyte-reduced apheresis platelets provided by blood stations in Hebei province,explore the distribution of monitoring values and the change of monitoring level,so as to further strengthen the homogenization construction of quality control laboratories in blood stations in Hebei.Methods In 2023,the sampling data of 12 blood stations in Hebei from 2015 to 2022 were collected,scatter plots were made and the range markers were set,and the"mean±SD"line was taken as the upper limit and lower limit of the measurement range.In 2024,the monitoring values in 2023 were added,and the changes of two measurement ranges were compared to analyze the stability and overall level.Results Comparison of the measurement range from 2015 to 2022 and the measurement range from 2015 to 2023 showed that the standard deviation of the content of deleukocyte suspension of red blood cells-hemoglobin,washed erythrocyte-hemoglobin,washed erythrocyte-su-pernatant protein,cryoprecipitate coagulation factor-FⅧ,fresh frozen plasma-FⅧ,leukocyte-reduced apheresis platelets-leukocyte residue and leukocyte-reduced apheresis platelet-red blood cell concentration decreased from 8.132 to 7.993,6.252 to 6.104,0.273 to 0.267,57.506 to 56.276,0.920 to 0.892,0.653 to 0.644 and 2.653 to 2.603,respectively.The narrowing of the standard deviation range of the above items led to more concentrated monitoring values and reduced disper-sion.Comparison of the measurement range from 2015 to 2022 and the measurement range from 2015 to 2023 showed that the mean value of leukocyte residue of the deleukocyte suspension of red blood cells,hemoglobin content of the wash eryth-rocyte,protein content of supernatant of the wash erythrocyte,hemolysis rate of the wash erythrocyte,FⅧ content of the cryoprecipitate coagulation factor,plasma protein content of the fresh frozen plasma,FⅧ content of the fresh frozen plasma,platelet content of the leukocyte-reduced apheresis platelets changed from 0.362 to 0.476,44.915 to 44.861,0.280 to 0.283,0.137 to 0.142,133.989 to 133.271,60.262 to 60.208,1.301 to 1.277 and 3.036 to 3.033,respectively,and was closer to the national standard line,which reflects an increase in the number of unqualified monitoring values or values close to the national standard line in 2023.The long-term qualified rate of coagulation items was low,and no improvement has been ob-served.The stability of biochemical items has been enhanced but overall deviation has occurred,with the average value close to the national standard line.The possibility of subsequent testing failure has increased.The counting items showed no obvi-ous common characteristics.Conclusion The use of"mean±SD"in the analysis can visually display the distribution of mo-nitoring values of different items in Hebei,forming an indicator measurement range covering the past nine years.It shows the characteristics of each item,and provides reference for subsequent quality control laboratory data analysis of each blood sta-tions to takes active measures to improve the monitoring level.

Objective:To verify the predictive value of the Second Revision of the International Staging System (R2-ISS) in newly diagnosed patients with multiple myeloma (MM) who underwent first-line autologous hematopoietic stem cell transplantation (ASCT) in a new drug era in China.Methods:This multicenter retrospective cohort study enrolled patients with newly diagnosed MM from three centers in China (Beijing Chao-Yang Hospital, Capital Medical University; the First Affiliated Hospital, Sun Yat-Sen University, and the Second Affiliated Hospital of Naval Medical University) from June 2008 to June 2018. A total of 401 newly diagnosed patients with MM who were candidates for ASCT were enrolled in this cohort, all received proteasome inhibitor and/or immunomodulator-based induction chemotherapy followed by ASCT. Baseline and follow-up data were collected. The patients were regrouped using R2-ISS. Progression-free survival (PFS) and overall survival (OS) were analyzed. The Kaplan-Meier method was used to analyze the survival curve and two survival curves were compared using the log-rank test. Cox regression analysis were performed to analyze the relationship between risk factors and survival.Results:The median age of the patients was 53 years (range 25-69 years) and 59.5% (240 cases) were men. Newly diagnosed patients with renal impairment accounted for 11.5% (46 cases). According to Revised-International Staging System (R-ISS), 74 patients (18.5 %) were diagnosed with stage Ⅰ, 259 patients (64.6%) with stage Ⅱ, and 68 patients (17.0%) with stage Ⅲ. According to the R2-ISS, the distribution of patients in each group was as follows: 50 patients (12.5%) in stage Ⅰ, 95 patients (23.7%) in stage Ⅱ, 206 patients (51.4%) in stage Ⅲ, and 50 patients (12.5%) in stage Ⅳ. The median follow-up time was 35.9 months (range, 6-119 months). According to the R2-ISS stage, the median PFS in each group was: 75.3 months for stage Ⅰ; 62.0 months for stage Ⅱ, 39.2 months for stage Ⅲ, and 30.3 months for stage Ⅳ; and the median OS was not reached, 86.6 months, 71.6 months, and 38.5 months, respectively. There were statistically significant differences in PFS and OS between different groups (both P<0.001). Multivariate Cox regression analysis showed that stages Ⅲ and Ⅳ of the R2-ISS were independent prognostic factors for PFS ( HR=2.37, 95% CI 1.30-4.30; HR=4.50, 95% CI 2.35-9.01) and OS ( HR=4.20, 95% CI 1.50-11.80; HR=9.53, 95% CI 3.21-28.29). Conclusions:The R2-ISS has significant predictive value for PFS and OS for transplant-eligible patients with MM in the new drug era. However, the universality of the R2-ISS still needs to be further verified in different populations.

Objective:To explore the efficacy of online pulmonary rehabilitation (PR) management among community-dwelling patients with stable chronic obstructive pulmonary disease (COPD).Methods:This study was a single-center randomized controlled trail with an unblinded design. A total of 130 patients with stable COPD who visited Zhuanqiao Community Health Service Center in Shanghai Minhang District from October 2020 to March 2022 were randomly divided into study group and control group with 65 cases in each group. Both groups received conventional treatment, while patients in study group attended online rehabilitation management, including face-to-face rehabilitation instruction and multiple online guidance. Pulmonary ventilation function including forced vital capacity (FVC), forced expiratory volume in the first second (FEV 1) and percentage of forced expiratory volume in the first second to forced expiratoty volume (FEV 1%pred), modified British Medical Research Council Dyspnea Scale (mMRC), chronic obstructive pulmonary disease assessment test (CAT), score of 6 minutes walking distance (6MWD) and DOSE (dyspnea, degree of airflow obstruction, smoking status, the number of exacerbation) index were measured at baseline and after 8 weeks of rehabilitation, and compared between two groups. Results:The baseline data of the two groups were comparable. After 8 weeks of management, FVC, FEV 1, FEV 1%pred, mMRC, CAT, 6MWD and DOSE index of both groups were improved compared with the baseline level(control group: t=-7.799, -7.581, -9.010, 3.565, 9.887, -16.677, 3.795; study group: t=-12.623, -13.914, -17.644, 7.404, 22.457, -26.826, 7.968; all P<0.05). The FEV 1%pred, CAT and 6MWD in the study group were better than those in the control group ( t=-2.939, 2.277,-2.130, all P<0.05); while there were no significant differences in FVC, FEV 1, mMRC and DOSE index between the two groups( t=-0.162, -1.280, 0.925, 1.939,all P>0.05). Conclusions:The online pulmonary rehabilitation management can better improve lung function, dyspnea symptoms and exercise tolerance of patients with stable COPD, which can be used for rehabilitation training and management of community-dwelling patients.

Objective:This study examines the application of echocardiography in the prenatal diagnosis of copy number variation (CNV) associated with fetal congenital heart disease (CHD).Methods:A retrospective analysis was conducted on 447 singleton pregnancies from Quanzhou Maternal and Child Care Hospital (Quanzhou Children's Hospital) from January 2019 to August 2022. These individuals underwent echocardiographic assessments suggestive of fetal CHD and subsequently received invasive prenatal diagnoses. Comprehensive karyotype analysis and chromosome microarray analysis (CMA) were performed for each case. The discrepancies in the chromosomal abnormality detection were analyzed between the results produced by CMA and karyotype analysis. Furthermore, differences in the detection of pathogenic copy number variation (pCNV) between the two methods in CHD cases with diverse cardiac phenotypes, including the presence or absence of extracardiac structural malformations, the type, and quantity of cardiac structural anomalies, were explored. Statistical analysis was conducted using the Chi-square test. Results:Compared with conventional karyotype analysis, CMA demonstrated a higher detection rate of fetal chromosomal abnormalities [10.5% (47/447) vs. 20.6% (92/447), χ 2=161.56, P<0.001]. In terms of distinct cardiac phenotypes, CHD cases with extracardiac structural anomalies displayed an escalated pCNV detection rate in comparison to isolated CHD cases [11.4% (45/394) vs. 32.1% (17/53), χ 2=16.68, P<0.001]. Within the cardiac structural anomaly subgroups, increased pCNV detection rates were observed in the septal defect subgroup, conotruncal malformation subgroup, and left ventricular malformation subgroup [18.4%(29/158), 25.9%(7/27), and 25.0%(7/28) vs. 7.6%(16/210); χ 2=9.15, 9.68, and 8.55, respectively, all P<0.05]. The CMA-identified pCNV correlated with CHD included 22q11.2 deletions/duplications in eight cases, 4p16.3 deletions in two cases, 11q23.3 microduplications in two cases, 1q21.1 microdeletions/microduplications in two cases, 4q28.3 microduplications in one case, and 10p15.3 microdeletions in one case. Conclusions:CMA technology exhibited an enhanced ability to detect pCNV in fetuses with CHD. Echocardiography can guide targeted CMA screening, thereby facilitating prenatal genetic assessment of CHD.