IgG4-related diseases have a low incidence and are easily misdiagnosed as tumors in clinical treatments. A 26-year-old male patient was admitted to the hospital because of a left adrenal tumor found in health examination for more than 5 months. The tumor in the left adrenal region could be seen from abdominal CT, and the retroperitoneal laparoscopic resection of the left adrenal tumor was performed. Postoperative pathology was consistent with IgG4-related diseases, and serum IgG4 was abnormally high. After 2 months’ follow-up, serum IgG4 returned to normal, and no special discomfort.

The incidence of solitary fibroma of seminal vesicle is low, and the source of seminal vesicle is rare. A 38-year-old patient was admitted to hospital because of intermittent gross hematuria for more than one month. Seminal vesicle space occupying lesions can be seen in pelvic MRI. Laparoscopic resection of right seminal vesicle tumor was performed, and the pathological diagnosis tended to solitary fibroma. During the 5-month follow-up, the symptoms of hematuria disappeared and no recurrence.

Objective To analyze the feasibility and safety in application of resectoscope combined with laparoscopy in the operation treatment of paraganglioma of urinary bladder.Methods 7 cases patients with paraganglioma of urinary bladder treated in our hospital from November 2014 to August 2018 were analyzed retrospectively.There were 5 males and 2 females,average age of 31.1 years (22-37 years),average body mass index was 22.3 kg/m2 (18.3-22.5 kg/m2).All the 7 cases patients complained of dizziness and palpitation after urination,average basal systolic blood pressure was 111.8 mmHg (97-124 mmHg),the average fluctuation of systolic blood pressure before and after urination was 64.9 mmHg(28-91 mmHg),the CT and cystoscopy prompt bladder tumor,the average diameter was 2.7 cm(2.1-3.5 cm).The average of plasma norepinephrine was 706.3 pg/ml(330-997 pg/ml);the average of plasma dopamine was 101.1 pg/ml(44-145 pg/ml);the average of 24h urinary vanilmandelic acid was 13.4 mg/24h (10.3-16.1 mg/24h).All the patients has controlled the blood pressure and dilate the blood vessels with phenoxybenzamine hydrochloride,accepted the operation of resectoscope combined with laparoscopy partial cystectomy and bladder sutura per abdomen after ample dilatancy.The patients had lithotomy position with trendelenburg,preparation of gas peritoneal cavity by transabdominal,inside the resectoscope by transurethral at the same time,mutilated bladder mucosa beside 1cm at the edge of the tumor,and cut full thickness bladder wall,take the extraperitional fat as the standard procedure;we could see the cutting edge clear at this time by laparoscopy,cut off the pelvic peritoneum,extraperitional fat and the tumor.The sample placed in bladder,close the bladder with absorbable or barbed wires,take out the sample by resectoscope.Results All the 7 cases patients operation was successfully completed,no cases has been transfered to open.The average time of operation is 85.3 min(65-100 min),the average amount of bleeding is 27.9 ml(10-50 ml).The average fluctuation of systolic blood pressure is 8.7 mmHg(6-15 mmHg).Bladder washout was stopped 24h after operation,catheter was removed 1 weeks after operation.There is no obvious complications occurred.The average hospital stay is 3.7 days (3-5 days).The average pain score of 4 cases 4h after operation is 3.8 (2-5),reevaluation 24h after operation is 2.3 (1-4).The average follow-up time is 7.9 months(2-15 months).All the 7 cases patients clinical symptoms disappeared,there is no fluctuation of systolic blood pressure before and after urination,there is no recurrence of the tumor.Conclusions To the paraganglioma of urinary bladder in fundus of bladder or anterior wall of bladder,we can accurate resection tumor by resectoscope combined with laparoscopy,reduce blood pressure fluctuations,reduce the surgical trauma and the distress of patients.It is a safety and effective minimally invasive surgery.

OBJECTIVETo evaluate the structural characteristics and biocompatibility of a novel nano-Ta-Ti alloy rod for its potential application in internal fixation.

METHODSTa coating of a Ti alloy rod with nano-Ta (tantalum) powder was performed using laser melting with symmetrical grooves repleted with nano-Ta powder along the whole length. The microstructure of the cross section of Ta-Ti alloy rod, pore diameter and components of the coating were analyzed using scanning electron microscopy. The influence of this nano-Ta-Ti alloy on proliferation and differentiation of MC3T3-E1 cells was evaluated by MTT cytotoxicity test and ALP activity test.

RESULTSUnder scanning electron microscope, the Ta-coating surface presented with a gross porous (200-300 µm) structure with dense fusion between Ta particles, and no new element was produced after laser melting. Biocompatibility evaluation showed that Ti alloys with and without Ta coating both promoted the proliferation of MC3T3-E1 cells, but the coated alloy showed better performance and obviously promoted the differentiation of the osteoblasts.

CONCLUSIONAlloying between Ta and Ti can be accomplished successfully by laser melting technique, and the alloy obtained has ideal surface structure and good biocompatibility.

3T3 Cells ; Alloys ; Animals ; Biocompatible Materials ; Cell Differentiation ; Cell Proliferation ; Materials Testing ; Mice ; Microscopy, Electron, Scanning ; Osteoblasts ; cytology ; Porosity ; Tantalum ; Titanium

Objective To evaluate the structural characteristics and biocompatibility of a novel nano-Ta-Ti alloy rod for its potential application in internal fixation. Methods Ta coating of a Ti alloy rod with nano-Ta (tantalum) powder was performed using laser melting with symmetrical grooves repleted with nano-Ta powder along the whole length. The microstructure of the cross section of Ta-Ti alloy rod, pore diameter and components of the coating were analyzed using scanning electron microscopy. The influence of this nano-Ta-Ti alloy on proliferation and differentiation of MC3T3-E1 cells was evaluated by MTT cytotoxicity test and ALP activity test. Results Under scanning electron microscope, the Ta-coating surface presented with a gross porous (200-300μm) structure with dense fusion between Ta particles, and no new element was produced after laser melting. Biocompatibility evaluation showed that Ti alloys with and without Ta coating both promoted the proliferation of MC3T3-E1 cells, but the coated alloy showed better performance and obviously promoted the differentiation of the osteoblasts. Conclusion Alloying between Ta and Ti can be accomplished successfully by laser melting technique, and the alloy obtained has ideal surface structure and good biocompatibility.

Objective To evaluate the structural characteristics and biocompatibility of a novel nano-Ta-Ti alloy rod for its potential application in internal fixation. Methods Ta coating of a Ti alloy rod with nano-Ta (tantalum) powder was performed using laser melting with symmetrical grooves repleted with nano-Ta powder along the whole length. The microstructure of the cross section of Ta-Ti alloy rod, pore diameter and components of the coating were analyzed using scanning electron microscopy. The influence of this nano-Ta-Ti alloy on proliferation and differentiation of MC3T3-E1 cells was evaluated by MTT cytotoxicity test and ALP activity test. Results Under scanning electron microscope, the Ta-coating surface presented with a gross porous (200-300μm) structure with dense fusion between Ta particles, and no new element was produced after laser melting. Biocompatibility evaluation showed that Ti alloys with and without Ta coating both promoted the proliferation of MC3T3-E1 cells, but the coated alloy showed better performance and obviously promoted the differentiation of the osteoblasts. Conclusion Alloying between Ta and Ti can be accomplished successfully by laser melting technique, and the alloy obtained has ideal surface structure and good biocompatibility.

[Objective]To study the role of nitric oxide on the degeneration of the cartilage endplate(CEP).[Method]Twenty-four New Zealand rabbits were divided into experiment and control groups.In the experiment group,the model of lumbar CEP degeneration was established by resection of all lumbar supraspinous and interspinous ligaments,excision of parts of zygapophysial joints and detachment of the posterior paravertebral muscles from lumbar vertebraes.Mechanical instability of the lumbar spine could induced the process of CEP degeneration.The X-ray examination of lumbar spine was examined by at 12,24 and 36 weeks with or without operation,respectively.Changes of the ultrastructure of CEP were also observed by scanning electron microscope(SEM) during this process,and the content of IL-1?,IL-6,TNF-? in the CEP were also detected during the periods.[Result]X-ray graph showed that the CEP calcified gradually with time increasing,and those of the experiment groups calcified more obviously than those of the control groups.The SEM showed that collagen fibers became thin,irregular and fissured and the content of proteoglycan decreased severely with the elapse of time.The changes in experiment groups were more obvious than those in control groups.The content of IL-1?,IL-6,TNF-? had a significant difference between the experiment groups and the control groups(P0.05).[Conclusion]It implies that inflammatary cytokin may play an important role in the development and progression of the degeneration of cartilage endplate.

[Objective]To analyze the reasons and counter treatment of complication after prosthetic disc nucleus implantation.[Method]From Feb 2002 to Aug 2004,80 patients of lumbar disc herniation were implanted with one single PDN device at our centre.65 patients of them came to the clinical,functional,and radiographic follow-up examinations,magnetic resonance images and follow-up records of all patients were reviewed carefully.They were divided into three groups.Group A:30 cases had at least 24 months follow-up data.Group B:23 cases had at least 36 months follow-up data.Group C:12 cases had at least 48 months follow-up data.[Result]After implantation,device migrations were noticed in 3 patients.24 cases experienced low back pain.In 24~48 month follow-up,the MR images of 39 patients had shown the abnormal signal pattern of the endplate where PDN-solo was implanted,even 32 of them had been found subsidence.In Group A,the height of intervertebral disc at the 24 month follow-up was decreased 4%.In Group B,at 36 month follow-up,it was decreased 12%.In Group C,at 48 month follow-up,it was decreased 18%.[Conclusion]After follow-up,the clinical effect of PDN is preferred.However,the complications of device dislocation,device subsidence remain problems that must be highlighted.This study suggested that the complications of PDN are serious.Therefore,the proper selecting patients for PDN replacement are crucial for good results.The indications for PDN must be restricted.

[Objective] To assess the outcomes of lumbar spinal pedicle subtraction osteotomy on single segment for correction of kyphosis in ankylosing spindylitis.[Methods]15 patients were treated with L2 or L3 pedicle subtraction osteotomy and internal fixation by pedicle screw system.All the patients underwent X-ray examinations in standing position before and after the operations.The angles in different part of the sagittal planes were measured and the preoperative and postoperative differences were compared.[Results]All the operations were well complete.The mean time of operations was 3h and the mean bleeding was 840 ml.The lumbar lordosis angle increase from(14.5?15.5)?to(48.4?11.9)?,the total spinal kyphosis angle and the thoracolumbar kyphosis angle improve from(36.1?14.7)?and(30.7?9.3)?to(0.2?14.2)?and(23.7?12.3)? respectively,the sacral slope increase from(12.0?12.7)?to(28.9?8.8)?,whereas thoracic kyphosis angle remained relative stable.[Conclusion]Lumbar spinal pedicle subtraction osteotomy on single segment is a satisfactory and reliable technique for correction of kyphosis in ankylosing spindylitis and the average correction of lumbar lordosis was 33.9?.

OBJECTIVE: To compare the biomechanical differences among the atlantoaxial transarticular screw fixation (Magerl) and other posterior fixation techniques. METHODS: Seven preserved atlantoaxial-complex specimens were harvested and fixated with Magerl, Magerl plus Gallie wiring, Magerl plus Brooks wiring, pure Brooks, pure Gallie, and Halifax interlaminar clamping fixation, respectively. The torque for every fixation technique was measured at the point of five-degree rotation of the atlantoaxial joint. RESULTS: The torque for Magerl was 6.59 Nmplus minus1.14 Nm, which was significantly higher than any other pure posterior techniques including Gallie (1.74 Nmplus minus0.31 Nm). Brooks (4.06 Nmplus minus0.48 Nm) and Halifax (3.44 Nmplus minus0.87 Nm) (P<0.01), but less than Magerl plus brooks (9.94 Nmplus minus1.45 Nm) (P<0.01). No statistically significant difference was found between Magerl and Magerl plus Gallie wiring (7.61 Nmplus minus1.10 Nm) or between Brooks and Halifax. CONCLUSIONS: Compared with other pure posterior fixation techniques the atlantoaxial transarticular screw fixation technique provides more torsion-resistance capacity. It is also suggested that combined Gallie wiring do not add any biomechanical superiority to this technique.