Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

OBJECTIVE To analyze the factors influencing patient satisfaction in the outpatient pharmacy of tertiary maternity and child specialist hospitals in Chongqing， and provide a reference for improving the pharmaceutical management capability of tertiary maternity and child specialist hospitals and enhancing patients’ medical experience. METHODS Utilizing KANO model， a questionnaire was developed and data were analyzed. Key influencing factors were identified through the categorization of requirement attributes， Better values， Worse values， and two-dimensional matrix analysis. The impact of these categorized demand factors on overall satisfaction was further validated through Structural Equation Modeling （SEM）. RESULTS Cronbach’s α coefficient for the survey questionnaire was 0.855， exceeding the acceptable threshold of 0.7； Bartlett test for sphericality yielded a value of 5 538.56 with P＜0.01， indicating good reliability and validity of the survey results. Through the KANO model’s factor selection process， the top four key factors influencing patient satisfaction in outpatient pharmacies were determined to be： medication pick-up time （r＝0.45）， pharmacist service attitude （r＝0.45）， rational medication consultation （r＝0.41）， self-service calling system （r＝0.40）， all of which were subsequently validated through SEM. CONCLUSIONS The four factors of medication pick-up time， self-service calling system， pharmacist service attitude， and rational medication consultation significantly influence patient satisfaction in the outpatient pharmacies of tertiary maternity and child hospitals in Chongqing.

ObjectiveTo investigate the possible mechanism of Wenyang Shengji Ointment （温阳生肌膏， WSO） in the treatment of diabetic wounds with yin syndrome. MethodsA total of 24 SD rats were randomly divided into a group （n=6） and modeling group （n=18）. The modeling group rats were fed with high-fat diet for 14 days and then were injected intraperitoneally with streptozotocin to induce diabetic model. After steroid injection， full-thickness skin defects were created on the back of the rats to establish a diabetic wound with yin syndrome model. The normal group was fed with regular diet， and full-thickness skin defects were created surgically on the back of the rats. The 18 successfully modeled rats were further divided into three groups， the model group， the WSO group， and the Beifuxin （Recombinant Bovine Basic Fibroblast Growth Factor Gel， BX） group， 6 rats in each group. The WSO group was given the ointment to the wound， the Beifuxin group was givne BX gel， and the normal group and model group was disinfected and treated with saline. All groups had their dressings changed once daily for 14 days. Wound healing was recorded on days 0， 3， 7， and 14， and the wound healing rate was calculated on day 3， 7， and 14. On day 14 after treatment， HE staining was performed to observe the pathological morphology of the wound tissue. Western Blot was used to detect the relative protein levels of hypoxia-inducible factor 1 alpha （HIF-1α） and vascular endothelial growth factor （VEGF）. Immunofluorescence was used to measure the fluorescence intensity of HIF-1α in the wound tissue， and ELISA was used to detect the methylglyoxal （MGO） content in the wound tissue. ResultsCompared with the normal group， the model group showed poor wound healing on day 3， 7， and 14， with a low wound healing rate （P＜0.01）. HE staining showed scab coverage on the wound， with inflammatory cell infiltration and disorganized collagen arrangement. The relative protein levels of VEGF were significantly reduced， while the relative protein levels of HIF-1α and the MGO content significantly increased （P＜0.01）， and the fluorescence intensity of HIF-1α was enhanced. Compared to the model group， the WSO group and Beifuxin group showed better wound healing on day 3， 7， and 14， with an increased wound healing rate （P＜0.01）. The wound tissue showed clear and complete epithelial structure， reduced inflammatory cells， mature granulation tissue， and organized collagen arrangement. MGO content was significantly reduced （P＜0.01）. The relative protein levels of HIF-1α and VEGF both significantly increased in the WSO group， while only VEGF increased in the Beifuxin group （P＜0.05 or P＜0.01）. Compared with the Beifuxin group， the WSO group had a thicker epidermal layer， prominent collagen formation， significantly increased HIF-1α fluorescence expression， reduced MGO content in the wound tissue， and higher relative protein levels of HIF-1α （P＜0.05）. ConclusionWSO can reduce the accumulation of MGO in diabetic wound tissue with yin syndrome and activate the HIF-1α/VEGF pathway， which could be one of the mechanisms for promoting wound healing.

BACKGROUND:How to effectively promote bone regeneration and bone reconstruction after bone injury has always been a key issue in clinical bone repair research.The use of biological and degradable materials loaded with bioactive factors to treat bone defects has excellent application prospects in bone repair. OBJECTIVE:To investigate the effect of polylactic acid-glycolic acid copolymer(PLGA)composite scaffold modified by lysine-grafted graphene oxide nanoparticles(LGA-g-GO)on osteogenic differentiation and new bone formation. METHODS:PLGA was dissolved in dichloromethane and PLGA scaffold was prepared by solvent evaporation method.PLGA/GO composite scaffolds were prepared by dispersing graphene oxide uniformly in PLGA solution.LGA-g-GO nanoparticles were prepared by chemical grafting method,and the PLGA/LGA-g-GO composite scaffolds were constructed by blending LGA-g-GO nanoparticles at different mass ratios(1%,2%,and 3%)with PLGA.The micromorphology,hydrophilicity,and protein adsorption capacity of scaffolds of five groups were characterized.MC3T3 cells were inoculated on the surface of scaffolds of five groups to detect cell proliferation and osteogenic differentiation. RESULTS AND CONCLUSION:(1)The surface of PLGA scaffolds was smooth and flat under scanning electron microscope,while the surface of the other four scaffolds was rough.The surface roughness of the composite scaffolds increased with the increase of the addition of LGA-g-GO nanoparticles.The water contact angle of PLGA/LGA-g-GO(3%)composite scaffolds was lower than that of the other four groups(P<0.05).The protein adsorption capacity of PLGA/LGA-g-GO(1%,2%,and 3%)composite scaffolds was stronger than PLGA and PLGA/GO scaffolds(P<0.05).(2)CCK-8 assay showed that PLGA/LGA-g-GO(2%,3%)composite scaffold could promote the proliferation of MC3T3 cells.Alkaline phosphatase staining and alizarin red staining showed that the cell alkaline phosphatase activity in PLGA/LGA-g-GO(2%,3%)group was higher than that in the other three groups(P<0.05).The calcium deposition in the PLGA/GO and PLGA/LGA-g-GO(1%,2%,and 3%)groups was higher than that in the PLGA group(P<0.05).(3)In summary,PLGA/LGA-g-GO composite scaffold can promote the proliferation and osteogenic differentiation of osteoblasts,and is conducive to bone regeneration and bone reconstruction after bone injury.

BACKGROUND:According to existing clinical studies,vertebroplasty treatment with both the external pedicle approach and the pedicle approach can improve the pain and quality of life of patients with spinal compression fractures.Compared with the pedicle approach,the external pedicle approach has a freer puncture angle,and good bone cement dispersion effect can be obtained by adjusting the puncture angle. OBJECTIVE:To compare the impact of vertebroplasty through individualized unilateral external pedicle approach and bilateral pedicle approach on the treatment of spinal compression fractures by quantifying the dispersion effect of bone cement. METHODS:A total of 80 patients with thoracolumbar compression fracture were divided into two groups by random number table method.The bilateral pedicle group(n=40)underwent vertebroplasty through a bilateral pedicle approach,while the unilateral external pedicle group(n=40)underwent individualized vertebroplasty through a unilateral external pedicle approach.Anteroposterior and lateral X-rays of the affected vertebrae from two groups of patients were photographed to assess effect and type of bone cement dispersion within 3 days after surgery.Visual analog scale score,tenderness threshold around fracture,and Oswestry dysfunction index were assessed before,1,7 days,and 1 month after surgery. RESULTS AND CONCLUSION:(1)Dispersion effect of bone cement in unilateral external pedicle group was better than that in bilateral pedicle group(P<0.001),and the amount of bone cement perfusion was higher than that in bilateral pedicle group(P<0.001).In the bilateral pedicle group,the bone cement dispersion types were mainly concentrated in type Ⅰ and type Ⅲ,while in the unilateral external pedicle group,the bone cement dispersion types were mainly concentrated in type I and type Ⅱ,and there was a significant difference in bone cement dispersion types between the two groups(P<0.001).(2)Postoperative visual analog scale scores and Oswestry disability index of both groups were lower than those before surgery(P<0.001),and postoperative tenderness threshold around fracture showed a trend of decreasing first and then increasing.At the same time point after treatment,there were no significant differences in visual analog scale score,Oswestry disability index,and tenderness threshold around fracture between the two groups(P>0.05).(3)The results indicate that individualized vertebroplasty via unilateral external pedicle approach can achieve better bone cement dispersion,and the treatment effect is consistent with the vertebroplasty via classical bilateral pedicle approach.

BACKGROUND:The decreased postural control ability due to mild cognitive impairment in elderly people leads to the increased risk of falls.Dual-task is the primary research paradigm for evaluating the relationship between cognition and postural control in the scenes close to real life.The sample entropy of the plantar center of pressure(COP)displacement during standing can represent the complexity of postural control. OBJECTIVE:Based on the COP displacement sample entropy,to analyze the differences in postural stability characteristics and control strategies between older adults with mild cognitive impairment and cognitively normal older adults during the dual-task with postural control and spatial working memory,aiming to explore the impact of cognitive impairment on the postural control ability during standing. METHODS:Sixteen older adults with mild cognitive impairment and 17 cognitively normal older adults were eligible and selected for the study.They completed five test tasks,including spatial working memory,double-feet balance stance,Romberg stance,double-feet balance stance-spatial working memory dual-task,and Romberg stance-spatial working memory dual-task,with three valid completions of each task.The plantar COP data were collected by the Kistler 3D force platform.The indicators included cognitive behavior(cognitive score and reaction time)and kinematic indexes(COP displacement and sample entropy). RESULTS AND CONCLUSION:The older adults with mild cognitive impairment performed the spatial working memory task with the greatest cognitive score and the shortest reaction time,the double-feet balance stance-spatial working memory dual-task with moderate cognitive score and reaction time,and the Romberg stance-spatial working memory dual-task with the smallest cognitive score and the longest reaction time,where the differences were significant among the tasks(P<0.05).In the older adults with mild cognitive impairment,the anterior-posterior and medial-lateral COP displacements were significantly greater,and their sample entropy values were significantly smaller in the double-feet balance stance-spatial working memory dual-task and Romberg stance-spatial working memory dual-task than in the double-feet balance stance and Romberg stance tasks(P<0.05).In the spatial working memory task,there were no significant differences in cognitive score and reaction time between the both groups(P>0.05);however,in the double-feet balance stance-spatial working memory dual-task and Romberg stance-spatial working memory dual-task,cognitive scores were significantly smaller and reaction times were longer in the older adults with mild cognitive impairment compared with the cognitively normal older adults(P<0.05).In the double-feet balance stance-spatial working memory dual-task and Romberg stance-spatial working memory dual-task,the older adults with mild cognitive impairment exhibited significantly greater anterior-posterior and medial-lateral COP displacements and significantly smaller sample entropy values compared with the cognitively normal older adults(P<0.05).All findings indicate that compared with cognitively normal older adults,older adults with mild cognitive impairment exhibit smaller complexity,poorer systematic adaption and decreased automatic regulation of the postural control during performing the dual-tasks,who are more susceptible to spatial working memory interference,leading to the increased risk of falls.

Abstract Upper cross syndrome (UCS) is an abnormal body posture phenomenon. The detection rate of UCS in adolescents is high in China, which has become a serious public health problem threatening the health of adolescents. Exercise therapy has a positive effect on the prevention and treatment of UCS.The article reviews the pathological mechanisms of muscle imbalance, muscle interaction inhibition, and neural control related to the occurrence and development of UCS both domestically and internationally in recent years.And it elucidates the effects and corresponding mechanisms of exercise interventions such as gentle exercise, stretching exercise and physical function training on UCS, so as to provide help for the correction of UCS.

Background The job content of aircraft maintenance workers is complex, with high intensity and high requirements, and they are prone to work-related musculoskeletal disorders (WMSDs), but related research is relatively rare. Objective To investigate the positive rate of WMSDs among aircraft maintenance workers, evaluate ergonomic load, and analyze the risk factors of WMSDs. Methods We used a self-compiled questionnaire for WMSDs and the Quick Exposure Checklist (QEC) to investigate the basic situation, positive rate of WMSDs, and the ergonomic load of 2271 male maintenance workers in 6 departments of an aircraft maintenance company, including airline maintenance, overall overhaul, accessory/landing gear overhaul, engine overhaul, product customization, and power assist. We used a logistic regression model to analyze the risk factors of WMSDs in the neck, shoulder, hand/wrist, and lower back. Results The positive rate of WMSDs in the past 12 months was 70.4% (1598/2271) and the positive rate of WMSDs in different body parts ranged from 6.6% to 49.5%, with the top three parts of lower back, neck, and knee, respectively. There were statistically significant differences in the positive rate among different departments (P<0.05). The average QEC scores for neck, hand/wrist, and back (static) were moderate, while those for shoulder and back (dynamic) were high, and the body part specific positive rate of WMSDs increased with the increase of ergonomic load level. Working years (5-<10 years, ≥20 years), working with back flexed or twisted or side bent (moderately, excessively), high maximum force level exerted by one hand, and feeling difficult (sometimes, often) and stressful (moderately, very) while working were associated with higher risks of lower back pain (OR=1.486, 1.505; 2.151, 3.769; 1.637; 2.110, 2.407; 1.637, 1.794; P<0.05). Working years (15-<20 years, ≥20 years), working with head/neck bent or twisted (occasionally, continuously), feeling difficult (sometimes) and stressful (very) while working were associated with higher risks of neck pain (OR=1.731, 1.586; 3.732, 8.341; 1.633; 1.696; P<0.05). Working years (15-<20 years, ≥20 years), working with hands in a high position (at shoulder or above), very frequent shoulder/arm movements, feeling difficult (sometimes, often) and stressful (moderately, very) while working were associated with higher risks of shoulder pain (OR=1.587, 1.709; 1.299; 1.521; 1.643, 2.239; 1.659, 1.977; P<0.05). Working with wrist at deviated or bent angle, high repetition of similar movements, feeling difficult (sometimes, often) and stressful (moderately, very) while working were associated with higher risks of hand/wrist pain (OR=1.692; 1.670; 1.827, 2.884; 2.190, 2.625; P <0.05) . Physical exercise after work (≥3 times·week⁻¹) was associated with a lower risk of neck pain (OR=0.582, P<0.05). Shift workers were at a lower risk of shoulder pain and hand/wrist pain (OR=0.737 and 0.554, P<0.05). Conclusion The high positive rate of WMSDs symptoms among aircraft maintenance workers is related to individual, occupational ergonomic, and psychological factors, and active prevention and intervention should be taken.

Objective To investigate the effect of sodium-glucose cotransporter 2 inhibitor (empagliflozin, EMPA) on myocardial remodeling in a mouse uremic cardiomyopathy (UCM) model induced by 5/6 nephrectomy, through the phosphatidylinositol 3 kinase (PI3K)/protein kinase B (PKB/AKT)/p65 signaling pathway. Methods The animals were divided into three groups: Sham group (n=6), UCM group (n=8), and UCM＋EMPA group (n=8). A UCM model was established in C57BL/6N mice using the 5/6 nephrectomy. Starting from 5 weeks post-surgery, EMPA or a placebo was administered. After 16 weeks, blood pressure, serum creatinine, blood urea nitrogen, 24-hour urine glucose and urine sodium were measured. Cardiac structure and function were assessed by echocardiography. Hematoxylin-eosin (HE) staining and Masson trichrome staining were used to observe pathological changes in the heart and kidneys. Wheat germ agglutinin (WGA) staining was used to evaluate myocardial hypertrophy. The real-time quantitative PCR (RT-qPCR) was used to detect the expression levels of myocardial hypertrophy- and fibrosis-related mRNAs. Western blotting was used to detect the expression levels of PI3K, AKT and p65 in myocardial tissues. Results After 16 weeks, UCM group exhibited significantly higher blood pressure, serum creatinine, blood urea nitrogen than sham group (P＜0.01); UCM＋EMPA group exhibited lower blood pressure, serum creatinine, blood urea nitrogen, and higher 24 h urine sodium and glucose than UCM group (P＜0.05). Echocardiographic results showed ventricular remodeling in the UCM group, evidenced by left ventricular wall thickening, left ventricular enlargement, increased left ventricular mass, and decreased systolic function (P＜0.05); ventricular remodeling was alleviated (P＜0.05), though there was no significant improvement in systolic function in UCM＋EMPA group. HE and Masson stainings revealed myocardial degeneration, necrosis, and interstitial fibrosis in UCM group (P＜0.01); the myocardial pathology improved with reduced collagen deposition in UCM＋EMPA group (P＜0.01). WGA staining confirmed myocardial hypertrophy in UCM group (P＜0.01), while myocardial hypertrophy was alleviated in UCM＋EMPA group (P＜0.01). RT-qPCR results showed myocardial hypertrophy- and fibrosis-related genes (NPPA, NPPB, MYH7, COL1A1, COL3A1, TGF-β1) were upregulated in UCM group (P＜0.05), but downregulated in UCM＋EMPA group. Western blotting showed PI3K, p-AKT/AKT ratio, and p-p65/p65 ratio were increased in UCM group, but decreased in UCM＋EMPA group (P＜0.05). Conclusion EMPA can improve myocardial hypertrophy and fibrosis in the UCM mouse model, and it may play the role through inhibiting the PI3K/AKT/p65 signaling pathway.

Objective: To analyze CD36 gene by PacBio Sequel Ⅱ the third-generation sequencing technology (TGS), including non-coding sequence, and to investigate the molecular mechanism of CD36 deficiency. Methods: Flow cytometry was performed in the southern Chinese population to detect the CD36 phenotype. Among them, 15 cases of CD36 type I deficiency, 15 cases of CD36 type Ⅱ deficiency, and 10 positive samples were selected. The TGS of the CD36 gene was performed and statistical analysis was conducted. Results: 40 samples (including 15 cases of type I deficiency, 15 cases of type Ⅱ deficiency, and 10 positive samples) were subjected by TGS of CD36 full-length sequences (except part of intron1). A total of 180 polymorphic loci were identified. Among them, 13 kinds were in the coding region, the rest were in non-coding region, with most mutations located in regulatory regions such as the 5′-UTR and 3′-UTR. Conclusion: The high polymorphism of CD36 non-coding regions, particularly in regulatory sequences, provides mechanistic insights into type Ⅱ CD36 deficiency.