OBJECTIVE: To explore the effect of Xuebijing injection on inflammation in sepsis by regulating intestinal microbiota and its metabolites. METHODS: A total of 45 male Sprague-Dawley (SD) rats were randomly divided into Sham operation group (Sham group), cecal ligation and perforation (CLP) induced sepsis group (CLP group), and Xuebijing intervention group (XBJ group, 4 mL/kg Xuebijing injection was injected intraperitoneally at 1 hour after CLP), with 15 rats in each group. The survival of rats was observed at 24 hours after operation and sacrificed. Feces were collected for 16S rRNA gene sequencing and liquid chromatography-mass spectrometry (LC-MS) analysis. RESULTS: At 24 hours after operation, all rats in the Sham group survived, the mortality of rats in the XBJ group was lower than that in the CLP group [47% (7/15) vs. 60% (9/15), P > 0.05]. Compared with the Sham group, the diversity of gut microbiota in the CLP group decreased, the dominant flora changed, and the abundance of inflammation-related flora increased. Xuebijing improved the changes in gut microbiota caused by sepsis, and α diversity showed an increasing trend (Ace index: 406.0±22.5 vs. 363.2±38.2, Chao1 index: 409.7±21.8 vs. 362.4±42.5, both P > 0.05). Restrictive constrained principal coordinate analysis (cPCoA) showed a high similarity in gut microbiota among the same group of rats. The CLP group was dominated by Bacteroidetes, while the Sham and XBJ groups were dominated by Firmicutes. In addition, compared with the CLP group, Xuebijing treatment increased the abundance of beneficial bacteria in septic rats, such as Verrucomicrobia, Akkermansia and Lactobacillus. LC-MS and orthogonal partial least squares discriminant analysis (OPLS-DA) showed that there were 12 main differential metabolites among the three groups, and there were certain correlations between these metabolites, which were related to amino acid and lipid metabolism. Correlation analysis showed a significant correlation between changes in metabolites and microbial communities. CONCLUSIONS Xuebijing can improve the survival rate of septic rats, regulate the composition of intestinal flora and related metabolites, which provides a new pathophysiological mechanism for Xuebijing in the treatment of sepsis.
Rats ; Male ; Animals ; Rats, Sprague-Dawley ; Gastrointestinal Microbiome ; RNA, Ribosomal, 16S ; Sepsis/metabolism* ; Inflammation

OBJECTIVES: Root canal therapy is the most effective and common method for pulpitis and periapical periodontitis. During the root canal preparation, chemical irrigation plays a key role. However, sodium hypochlorite (NaOCl), the widely used irrigation fluid, may impact the bonding strength between dentin and restorative material meanwhile sterilization and dissolving. Therefore, it's important to explore the influence of NaOCl on the adhesion between dentin and restoration materials to ensure clinical efficacy. This study aims to explore the effect of NaOCl on dentine adhesion and evaluate the effect of dentine adhesion induced by sodium erythorbate (ERY), and to provide clinical guidance on dentin bonding after root canal therapy. METHODS: Seventy freshly complete extracted human third molars aged 18-33 years old, without caries and restorations were selected. A diamond saw was used under running water to achieve dentine fragments which were divided into 10 groups with 14 fragments in each group: 2 control [deionized water (DW)±10% ERY] and 8 experimental groups (0.5%, 1%, 2.5%, and 5.25% NaOCl±10% ERY). The dentine specimens in the control group (treated with DW) and the experimental groups (treated with 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl) were immersed for 20 min using corresponding solutions which were renewed every 5 min. The other 5 groups were immersed in 10% ERY for 5 min after an initial washing with DW for 1 min. Then, we selected 4 dentine fragments from all 14 fragments in each group and the numbers and diameters of opening dentinal tubules were observed under scanning electron microscope (SEM). The other 10 dentine fragments from each group were used to make adhesive samples by using self-etch adhesive wand composite resin. All the above adhesive samples were sectioned perpendicular to the bonded interface into 20 slabs with a cross-sectional area of 1 mm×1 mm using a diamond saw under the cooling water, and then the morphology of 10 slabs in each group's bonding interface was observed from aspects of formation of resin tags, depth of tags in dentin, and formation of hybrid layer under SEM. The other 10 slabs of each group's microtensile bond strength and failure modes were also analyzed. RESULTS: Among the 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules gradually increased with the rise of concentration of NaOCl solution (all P<0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules increased after using ERY, but without significant difference (all P>0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, the scores of formation of resin tags under SEM gradually increased with the increase of concentration of NaOCl solution, while the score in the 5.25% NaOCl group decreased significantly compared with the score of the 2.5% NaOCl group (P<0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (all P>0.05). The scores of length of the tags under SEM in the 5.25% NaOCl group was significantly higher than the scores of DW, 0.5% NaOCl, and 1% NaOCl groups (all P<0.05), and it was also higher than the score of the 2.5% NaOCl group, but without significant difference (P>0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (P>0.05). The scores of formation of hybrid layer under SEM in the 2.5% NaOCl and 5.25% NaOCl groups significantly decreased compared with the score of the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). Microtensile bond strength was greater in the 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, but lower in the 5.25% NaOCl group than that in the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). The incidence of type "Adhesive" of failure modes in the 5.25% NaOCl group was significantly higher than that in other groups (all P<0.05), while the incidence of type "Adhesive" in the 5.25% NaOCl+10% ERY group was lower than that in the 5.25% NaOCl group (P<0.05). CONCLUSIONS The bonding strength to dentine increases with the increase of NaOCl concentration when the concentration lower than 2.5%; whereas it is decreased at a higher concentration (such as 5.25%). 10% ERY has a definite recovery effect on attenuated bonding strength to 5.25% NaOCl-treated dentine.
Adolescent ; Adult ; Ascorbic Acid ; Dental Bonding ; Dentin ; Dentin-Bonding Agents/pharmacology* ; Diamond/pharmacology* ; Humans ; Materials Testing ; Microscopy, Electron, Scanning ; Resin Cements/pharmacology* ; Sodium Hypochlorite/pharmacology* ; Tensile Strength ; Water/pharmacology* ; Young Adult

The continuous glucose monitoring system (CGMS) has been clinically applied to monitor the dynamic change of the subcutaneous interstitial glucose concentration which is a function of the blood glucose level by glucose sensors. It can track blood glucose levels all day along, and thus provide comprehensive and reliable information about blood glucose dynamics. The clinical application of CGMS enables monitoring of blood glucose fluctuations and the discovery of hidden hyperglycemia and hypoglycemia that are difficult to be detected by traditional methods. As a CGMS needs to work subcutaneously for a long time, a series of factors such as biocompatibility, enzyme inactivation, oxygen deficiency, foreign body reaction, implant size, electrode flexibility, error correction, comfort, device toxicity, electrical safety, et al. should be considered beforehand. The study focused on the difficulties in the technology, and compared the products of Abbott, Medtronic and DexCom, then summarized their cutting-edge. Finally, this study expounded some key technologies in dynamic blood glucose monitoring and therefore can be utilized as a reference for the development of CGMS.
Blood Glucose ; Blood Glucose Self-Monitoring/methods* ; Humans ; Hyperglycemia ; Hypoglycemia ; Monitoring, Ambulatory/methods* ; Monitoring, Physiologic

In order to solve the problem of dust hazard of vibrating screen machine and difficult treatment in catalyst production process, computational fluid dynamics software Fluent was used to carry out numerical simulation calculation of the local exhaust dust removal system for the main dust dispersing points of the vibrating screen machine, including fine/coarse particles outlet and product outlet blowing and cleaning the dust points. The optimal design scheme and key technical parameters of local ventilation and dust removal system of vibrating screen machine were proposed. The results showed that the dust diffusion could be prevented by setting up an upper suction hood without air blowing, but the exhaust air volume needed to be calculated accurately. On the premise of purge, it is necessary to control the air volume to form a wind speed band of 8 m/s with a height of 15 cm at the feed port, so as to effectively remove the dust on the surface of solid particles of catalyst products and ensure that the catalyst products will not be blown away when falling into the feed barrel. The simulated design was applied to the vibrating sieve powder machine of a catalyst company, and the maximum dust concentration in the workplace was reduced from 45.80 mg/m 3 to 5.46mg/m 3, which effectively improved the working environment in the workplace.

Objective:To understand the etiology of a confirmed case of Coronavirus Disease 2019 (COVID-19).Methods:The pharyngeal swabs, serum and nasal swabs of a case of COVID-19 were inoculated into Vero-E6 cell tubes for virus isolation. The cytopathic effect (CPE) were observed daily. Collecting cell’s isolation when CPE was over 75%, after repeated freezing and thawing for 3 times, the supernatant was centrifugally taken, and the images of the virus were obtained by transmission electron microscopic observation, and the nucleic acid of the virus was extracted, second generation sequencing and sequence evolution analysis were used to identify and type the virus strains.Results:One strain of 2019 novel coronavirus (2019-nCoV) was successfully isolated from the nasal swab of this case of COVID-19, and one strain of herpes simplex virus type 1 (HSV-1) was also successfully isolated from the throat swab of the same case.Conclusions:COVID-19 cases have the possibility of co-infection with 2019-nCoV and HSV-1.

In order to solve the problem of dust hazard of vibrating screen machine and difficult treatment in catalyst production process, computational fluid dynamics software Fluent was used to carry out numerical simulation calculation of the local exhaust dust removal system for the main dust dispersing points of the vibrating screen machine, including fine/coarse particles outlet and product outlet blowing and cleaning the dust points. The optimal design scheme and key technical parameters of local ventilation and dust removal system of vibrating screen machine were proposed. The results showed that the dust diffusion could be prevented by setting up an upper suction hood without air blowing, but the exhaust air volume needed to be calculated accurately. On the premise of purge, it is necessary to control the air volume to form a wind speed band of 8 m/s with a height of 15 cm at the feed port, so as to effectively remove the dust on the surface of solid particles of catalyst products and ensure that the catalyst products will not be blown away when falling into the feed barrel. The simulated design was applied to the vibrating sieve powder machine of a catalyst company, and the maximum dust concentration in the workplace was reduced from 45.80 mg/m 3 to 5.46mg/m 3, which effectively improved the working environment in the workplace.

Objective:To investigate the relationship between SNP and noise-induced hearing loss (NIHL) susceptibility in occupational noise exposure population in China.Methods:From 6297 for a certain steel works in contact with noise, contact length of 3 years or more and workplace noise exposure intensity of 80 dB (A) , ears or high frequency (3 000, 4 000, 6 000 Hz) average of hearing acuity 40 dB (HL) , or high frequency loss in both ears, on the basis of single whisper frequency (500, 1, 000, 2 000 Hz) average threshold of 26 dB (HL) or object as case group. A case-control study was designed with 1:1 matching. Subjects with the same gender, the same type of work, age ±5 years old, and working age ±2 years after noise exposure were selected as the control group. Subjects with any whisper frequency (500, 1, 000, 2, 000 Hz) whose hearing threshold in any frequency band was ≤25 dB (A) and whose average high-frequency hearing threshold in pure tone hearing test was <35 dB (A) were selected as the control group. Four sites of PON2 gene were genotyped by medium-and high-throughput SNP genotyping. Univariate logistic regression was used to analyze the relationship between single SNP polymorphism and NIHL.Results:A total of 286 case-control pairs were included. Smoking was statistically significant difference between cases and controls ( P<0.001) . Conclusion:No statistical difference has been found between single SNP polymorphism and NIHL. At the level of greater than 92 dB of high noise exposure, rs7785846 (CT+TT) genotype is a risk factor for occupational noise deafness, and its OR is 2.74 (95% CI: 1.09-6.89) compared with wild homozygous type (CC) . Conclusion. The rs7785846 (CT+TT) genotype carriers of PON2 gene are more susceptible to hearing impairment when exposed to high noise intensity.

Objective:To investigate the relationship between SNP and noise-induced hearing loss (NIHL) susceptibility in occupational noise exposure population in China.Methods:From 6297 for a certain steel works in contact with noise, contact length of 3 years or more and workplace noise exposure intensity of 80 dB (A) , ears or high frequency (3 000, 4 000, 6 000 Hz) average of hearing acuity 40 dB (HL) , or high frequency loss in both ears, on the basis of single whisper frequency (500, 1, 000, 2 000 Hz) average threshold of 26 dB (HL) or object as case group. A case-control study was designed with 1:1 matching. Subjects with the same gender, the same type of work, age ±5 years old, and working age ±2 years after noise exposure were selected as the control group. Subjects with any whisper frequency (500, 1, 000, 2, 000 Hz) whose hearing threshold in any frequency band was ≤25 dB (A) and whose average high-frequency hearing threshold in pure tone hearing test was <35 dB (A) were selected as the control group. Four sites of PON2 gene were genotyped by medium-and high-throughput SNP genotyping. Univariate logistic regression was used to analyze the relationship between single SNP polymorphism and NIHL.Results:A total of 286 case-control pairs were included. Smoking was statistically significant difference between cases and controls ( P<0.001) . Conclusion:No statistical difference has been found between single SNP polymorphism and NIHL. At the level of greater than 92 dB of high noise exposure, rs7785846 (CT+TT) genotype is a risk factor for occupational noise deafness, and its OR is 2.74 (95% CI: 1.09-6.89) compared with wild homozygous type (CC) . Conclusion. The rs7785846 (CT+TT) genotype carriers of PON2 gene are more susceptible to hearing impairment when exposed to high noise intensity.

Objective To explore the effectiveness of impulse oscillometry(IOS)in airway responsiveness measurement and to find out the positive threshold of IOS for asthma diagnosis. Methods Seventy-nine children aged 6-14 years who had suspicious asthma,were recruited into the study. The positive criteria of the methacholine bron-chial provocation test was a 20％ reduction in forced expiratory volume in the first second (FEV 1 )compared to base-line. Simultaneously measured changes in various parameters of IOS,including resonant frequency(Fres),impedance at 5 Hz(Zrs),resistances at 5 and 20 Hz(R5,R20),reactance at 5 Hz(X5),and area of reactance(AX). The results of the challenge test were divided into positive and negative groups according to the pulmonary ventilation function me-thod. The differences between the 2 groups of IOS parameters before and after the challenge test,and the correlation be-tween the change rate of FEV1 and the change rate of IOS parameters were compared,and the positive judgment criteria of IOS parameters in the determination of respiratory responsiveness were determined. Results The positive group of bronchial provocation test had 37 patients and negative group had 42 patients. There was no significant difference in the basic values of parameters between the positive group and the negative group (all P > 0. 05). Changes in Zrs,R5,X5 of IOS were correlated with changes in FEV1 (r = 0. 374,0. 310,0. 449,all P < 0. 05). By single factor analysis,the area under the receiver operating characteristic(ROC)carve (AUC)showed:basic value of Zrs increased by 45. 85％,R5 increased by 45. 72％,X5 increased by 80. 74％ respectively compared to the baseline showed the optimal combination of sensitivity and specificity. In multivariate Logistic regression models,when Zrs and R5 were combined to measure the airway responsiveness,the sensitivity and specificity were 73. 0％ and 81. 0％,respectively. Conclusions IOS and spirometry can be used to determine airway responsiveness in children during methacholine bronchial challenge. Zrs≥45. 85％,or R5≥45. 72％,or X5≥80. 74％,or Zrs and R5 of multiple regression formula can be used as the positive criteria for young children with airway heperresponsiveness,the combination of Zrs and R5 has higher sensitivity and specificity.

This study aimed to investigate the prevalence and molecular characteristics of Listeria monocytogenes in cooked products in Zigong City, China. The overall occurrence of the L. monocytogenes in the ready-to-eat (RTE) shops and mutton restaurants surveyed was 16.2% (141/873). An occurrence of 13.5% was observed in RTE pork, 6.5% in RTE vegetables, and more than 24.0% in either cooked mutton or cooked haggis. Serotype 1/2b (45.4%), 1/2a (33.3%), and 1/2c (14.2%) were the predominant types. By comparing the clonal complexes (CCs) based on multilocus sequence typing (MLST) of the L. monocytogenes from cooked foods in Zigong City and 33 listeriosis cases from different districts of China, CC87, CC9, CC8, and CC3 were showed to be prevalent in cooked products and CC87 and CC3 were the first two frequent types in the 33 clinic-source strains. All CC87 stains harbored the newly reported Listeria pathogenicity island 4 (LIPI-4) gene fragment ptsA, and all CC3 strains possessed the Listeria pathogenicity island 3 (LIPI-3) gene fragment llsX. These may increase the occurrence of the strains belonging to CC87 and CC3 in listeriosis cases in China and also underline the risk of infection owing to the consumption of the cooked products from Zigong. ST619 (serotype 1/2b) harbored both llsX and ptsA, indicating a potential hypervirulent sequence type in Zigong.
China ; epidemiology ; Cooking ; Fast Foods ; microbiology ; Food Contamination ; Food Microbiology ; Humans ; Listeria monocytogenes ; genetics ; pathogenicity ; Listeriosis ; epidemiology ; microbiology ; Meat ; microbiology ; Multilocus Sequence Typing ; Prevalence ; Seasons