This article discusses the characteristics of cmmunity herbal monographs for traditional herbal medicinal products and its establishment procedure. It also reviews the new development of cmmunity traditional herbal monographs. The purpose is to clarify the relationship between cmmunity herbal monographs and simplified registration for traditional herbal medicinal product in European Union and provide reference to the registration of taditional Chinese mdicinal products in Europe.
Drug Approval ; legislation & jurisprudence ; European Union ; Humans ; Phytotherapy ; Plants, Medicinal

The collagen I was made with the dialysis method of enzymolysising the pig skin, and the static deposition in vitro of calcium phosphate was comparative studied by X-ray diffraction (XRD) and infrared spectroscopy (FTIR) under the condition of pH7. 4, Ca/P 1.67 and whether adding the collagen I into the system. Then the chemical composition of the sedimentary product and the diversification of the collagen I 's IR and Raman spectra (RS) before and after the mineralization were analyzed. The results showed that,under the physiological pH condition that there was not any collagen I, though Ca/P reached up to 1.67, the sedimentary product was CaHPO4 x 2H2O yet, however, after adding collagen I into the system, the bone-like apatite was deposited, which proved that collagen I indeed had the effects on the inducing of the bone-like apatite's mineralization in vitro; there was obviously mutual coordination action between collagen I and its mineralization product--bone-like apatite, which caused that amide peak I red-shifted, amide peak II and amide peak III decreased significantly or disappeared on the IR of collagen I, which maybe was the mechanism that how collagen I induced the depositing of the bone-like apatite.
Animals ; Apatites ; metabolism ; Collagen Type I ; pharmacology ; Osteogenesis ; drug effects ; Skin ; chemistry ; Swine

Bone cement samples were made of tetracalcium phosphate (TTCP) and monocalcium phosphate monohydrate(MCPM) powder (Ca/P = 1.67) by using water and 5.24 mg/ml of self-made type I collagen sol as hardening liquid with the solid-liquid ratio of 3:1, their setting time and compressive strength were tested. The results showed that: the compressive strength of TTCP/MCPM bone cement containing collagen could increase from 17.8 +/- 1.9 MPa to 22.7 +/- 1.6 MPa, but its setting time hasn't been significantly affected; the compressive strength of both samples immersed in simulated body fluid (SBF) could increase, and the growth rate of the sample containing collagen increased especially; both samples immersed in SBF for 4d and 14d, whose compressive strength could increase to 31.8 +/- 3.9 MPa (collagen)/19.5 +/- 1.3 MPa and 38.1 +/- 3.1 MPa (collagen)/21.9 +/- 2.2 MPa. According to the IR analysis before and after the collagen was mineralized, it showed that: after the collagen was mineralized, the characteristic peaks of the collagen's amide I band showed red-shift, while the amide II band and the amide III band nearly disappeared, suggesting that chemical action occurred between the collagen and hydroxyapatite (HA), which should be the basis of the enhancement on the TTCP/MCPM bone cement caused by collagen; while according to the SEM and XRD patterns of the sample surface before and after the samples were immersed in SBF, it showed that: the immersion in SBF changed brushite (DCPD) into HA, at the same time, large number of new HA deposited, making the samples' surface more dense and smooth. It was not only the enhancement mechanism of immersion in SBF, but also showed the coagulating and hardening process of TTCP/MCPM bone cement was that: the DCPD was generated firstly, then it changed into HA.
Bone Cements ; chemistry ; Calcium Phosphates ; chemistry ; Collagen Type I ; chemistry ; Compressive Strength

The research of calcium phosphate cement (CPC) has been developing for more than 20 years. In this review, we present a brief introduction to recent advances in researches on apatite CPC, brushite CPC, composite CPC materials; on factors affecting CPC capability and application; and on new application of CPC. The view that emphasizes the significance of studies on CPC with quicker degradation and osteoblast activity is put forward, particularly.
Absorbable Implants ; Bone Cements ; chemistry ; therapeutic use ; Bone Substitutes ; chemistry ; therapeutic use ; Calcium Phosphates ; chemistry ; therapeutic use ; Humans

Aim To design and synthesize new phenyloxyisobutyric acid analogues as antidiabetic compounds. Methods Eight new target compounds were synthesized by combination of lipophilic moieties and acidic moiety with nucleophilic replacement or Mitsunobu condensation. The eight compounds were confirmed by 1H NMR, 13C NMR, IR and MS. Results In vitro insulin-sensitizing activity (3T3-L1adipocyte) demonstrated, that the cultured glucose concentration of up-clear solution detected with GODpioglitazone, compounds A and B were added to the insulin-resistant system. Conclusion In vitro insulin-sensitizing activity of target compound A is in between that of rosiglitazone and pioglitazone, and activity of target compound B is slightly less than that of pioglitazone.

To clarify the reason causing difference of serum proteins adsorbability on different carbonaceous materials, FT-IR-ATR spectra of human serum albumin (HSA) and human serum fibrinogen(HFG) before and after adsorbing on diamond like carbon film (DLC),diamond film (DF) and graphite were analyzed. It has been shown that there are hydrogen bond because of -NH at the interfaces of HSA-DLC, HFG-DF and HFG-graphite. Based on the results, earlier research conclusion that the adsorbability of HSA on DLC higher than that on DF and graphite, but on DF and graphite the adsorption of HFG takes precedence can be explained rationally.
Adsorption ; Blood Proteins ; metabolism ; Diamond ; chemistry ; Graphite ; chemistry ; Humans ; Hydrogen Bonding ; In Vitro Techniques ; Membranes, Artificial ; Spectroscopy, Near-Infrared

The correlations between surface energy parameters and carbon phase components in six diamond like carbon film (DLC) samples made in different ways and processing conditions were further investigated using the analysis of T-type correlation degree in the Grey system theory based on our earlier studies such as the determination of carbon phase and surface energy parameters, the analyses of carbon phase components, surface energy parameters and adhesive characteristic of platelets for DLC. The results showed: (1) as a whole critical surface tension has the closest relation with carbon phase components, chromatic dispersion branch of surface tension takes the second place, but for the other four parameters, the correlation is weak; (2) DLC phase has larger negative correlation (degrees -0.57, -0.33) with critical surface tension and chromatic dispersion branch of surface tension, while its correlation degrees with the other four parameters related to polarity are all positive values smaller than 0.20; (3) C-H phase and C-O phase have larger positive correlation (degrees 0.48, 0.25) with critical surface tension. We have come to three conclusions (1) DLC phase plays a dominant part in hemocompatibilioty of DLC by powerfully decreasing humidification and limitedly increasing polarity; (2) the energy mechanism of platelet deformation enhanced by C-H phase and C-O phase involves increasing the critical surface tension of DLC; (3) the hemocompatibility of DLC can be evaluated by using the critical surface tension as index and using the content of DLC phase and additional content limitation of C-H phase and C-O phase as standard. This study has provided a theoretical basis for evaluating the hemocompatibility of DLC based on surface properties.
Biocompatible Materials ; chemistry ; Carbon ; chemistry ; Diamond ; chemistry ; Humans ; Male ; Materials Testing ; Membranes, Artificial ; Models, Biological ; Platelet Adhesiveness ; drug effects ; Surface Properties

In this study, the diamond like carbon (DLC) samples made from different processes and processing conditions, were subjected to the test of platelet adhesion. The surface energy parameters such as surface tension, critical surface tension, interface tension, adhesive power, and polar branch and chromatic dispersion branch of surface tension based on determining balanced contact angle of ethanol, water and different ratios of ethanol/water solution on surfaces of the samples were calculated, respectively. Then the effects of these parameters on the amounts and deformation index of the platelets adhering to the samples were assessed by analyzing the T-type correlation degree in the Grey system. The results showed: (1) all degrees of correlation between surface energy parameters and adhesion amounts of platelet are positive, but for deformation index, the correlation degrees are negative except for critical surface tension; (2) the adhesion amounts of platelet increase with the rising polar branch of surface tension, while the deformation index increases with rising chromatic dispersion branch of surface tension; (3) Both adhesion amounts and deformation index of platelet are positively correlated with critical surface tension to a higher degrees; (4) the effects of polar branch of surface tension on adhesion amounts and deformation index of platelet keep pace with the surface tension, interface tension and adhesive power. Thus two important conclusions have been obtained: (1) the adhesive characteristic of platelets to the surface of DLC is closely related with the surface energy of DLC; the hemocompatibility of DLC is decided by the balance between the polarity of DLC surface and the limited humidifying water on the surface; there is a blood compatible range delimited by critical surface tension; (2) adhesion and deformation of platelets on surface of DLC have different energy mechanism: polar surface is advantageous to the adhesion, while the deformation is achieved with the aid of chromatic dispersion action stem from the surface.
Biocompatible Materials ; chemistry ; Carbon ; chemistry ; Diamond ; chemistry ; Humans ; Materials Testing ; Platelet Adhesiveness ; Surface Properties

In order to evaluate diamond like carbon film (DLC), DLC containing Si, graphite, diamond film (DF), low temperature isotropic carbon film (LTIC) and SiC, we investigated the correlations between surface energy parameters and hemocompatibility indices such as kinetic clotting time, hemolysis and platelet consumption. An analysis of T-type correlation degree in the Grey system theory was performed. The results showed: (1) all of correlation degrees between kinetic clotting time and polar surface energy parameters were positive, but for critical surface tension, the correlation degree was negative; among five of surface energy parameters, interface tension had the highest relation degree (0.63) with kinetic clotting time, and critical surface tension (-0.43) took the second place; (2) on the contrary, all of correlation degrees between hemolysis and polar surface energy parameters were negative, but for critical surface tension, the correlation degree was positive; and that which had closer correlations with hemolysis were still interface tension (-0.43) and critical surface tension (0.29); (3) critical surface tension had the highest relation degree (0.68) with platelet consumption, and surface tension (0.32) took the second place; (4) kinetic clotting time possessed higher negative correlation degrees with hemolysis (-0.57) and platelet consumption (-0.36). These data indicate that kinetic clotting time depended on a balance between the polarity of surface and the limited humidifying of water on the surface, and that platelet consumption was based on good humidification and power polarity of surface, while hemolysis was promoted by the aid of chromatic dispersion action stemming from the surface and fully humidifying of water on the surface. There was "seesaw effect" between kinetic clotting time and hemolysis or platelet consumption, hence the hemocompatibility of carbonaceous biomaterials could be equivalently evaluated by using kinetic clotting time as an index. It has been confirmed: (1) successive occurrences, including adhesion, deformation and collection of platelets on the material surfaces as results of protein adsorption, are the major mechanism of blood coagulation of carbonaceous materials; (2) the hemocompatibility of carbonaceous biomaterials can be evaluated by using critical surface tension as an index. These findings may underpin the hemocompatibility evaluation of carbonaceous biomaterials based on surface properties.
Adsorption ; Biocompatible Materials ; chemistry ; Blood Platelets ; cytology ; Carbon ; chemistry ; Diamond ; chemistry ; Feasibility Studies ; Graphite ; chemistry ; Hemolysis ; Platelet Adhesiveness ; Surface Properties

In the present paper, adhesive test, morphology observation, classified counting and deformation index calculation of the platelets on seven DLC samples made by different processes were carried out after XPS analysis, respectively. Then the effects of carbon phase components on amounts and deformation index of the platelets adhered to the samples were investigated by using the analysis of T-type correlation degree in the grey system theory. It has been shown from results that the amounts and the deformation index of the platelets adhered to the DLC samples made by plasma source ion implantation-ion beam enhanced deposition (PSII-IBED) are obviously less than those of DLC samples made by plasma CVD. The correlation degrees (negative) between the DLC carbon phase and the amounts as well as the deformation index of platelets are much more than those of the other four carbon phase components; besides, larger correlation degrees (positive) only appear between the deformation index of platelets and the C-H carbon phase or C-O carbon phase. It has been indicated that: (1) the effect of DLC carbon phase on platelets adhesion is much greater than that of the other four carbon phase components, the key to improvement in the hemocompatibility of DLC is to increase the DLC carbon phase content; (2) it is necessary to restrain the form or decrease the C-H carbon phase content and C-O carbon phase content so as to control their promotive action on deformation of the platelets adhered to the surface of DLC; (3) using PSII-IBED process to prepare DLC is helpful to improving the hemocompatibility of DLC. These conclusions are essential for designing and improving the deposition process of DLC.
Biocompatible Materials ; Carbon ; chemistry ; Diamond ; chemistry ; Humans ; Male ; Materials Testing ; Models, Biological ; Platelet Adhesiveness