The present study employed UPLC-MS/MS to analyze and identify compounds in the raw powder of Tongluo Shenggu capsules. An HPLC method for the determination of vitexin content was established. The analysis of this drug was performed on a 30 ℃ thermostatic Acquity UPLC® BEH C18 (2.1 mm×100 mm,1.7 μm) column, with the mobile phase comprising 0.2% formic acid-methanol flowing at 0.3 mL /min in a gradient elution manner. Mass spectrometry was detected by ESI sources in both positive and negative ion modes for qualitative identification of chemical constituents. 12 flavonoid and 3 stilbenes compounds in the raw powder of Tongluo Shenggu capsules were successfully identified. Additionally, an HPLC method for the determination of vitexin content was established using a XBridge C18 column (4.6 mm × 250 mm, 5 µm) with a mobile phase of 0.05% glacial acetic acid in methanol for gradient elution, at a column temperature of 30 °C, a flow rate of 1.0 mL/min, and an injection volume of 20 μL. The method demonstrated good linearity in the concentration range of 10 µg/mL to 40 µg/mL (R=1.000) with an average recovery rate of 96.7%. The establishment of these methods provides a scientific basis for the quality control and development of the raw powder of Tongluo Shenggu capsules.

Objective:This study aims to investigate the anxiety-like behavior induced by cystitis and its neurobio-logical mechanisms in the anterior cingulate cortex(ACC)by constructing a mouse model of cystitis.Methods:A cys-titis model was established using lipopolysaccharide(LPS).Anxiety-like behavior in mice was explored through the open field test,and single-nucleus RNA sequencing was used to analyze changes in gene expression of neurons in the ACC.Results:HE staining results indicated significant inflammatory responses in the bladders of LPS-treated mice,including extensive infiltration of inflammatory cells,tissue edema,and bladder epithelial shedding.The open field test showed that the time and distance of mice moving in the central area of the open field were significantly reduced,indica-ting obvious anxiety-like behavior.Quality control of single-nucleus sequencing data suggested good data quality.Di-mensionality reduction clustering of the top 2000 highly variable genes revealed seven different cell subpopulations in the ACC.Five major cell types were identified in the ACC,and neurons were further clustered into five different subpopula-tions,identifying two main cell types.Differential gene analysis indicated significant changes in gene expression in neu-rons,with functional enrichment in pathways related to synaptic dysfunction.Conclusion:Cystitis can induce changes in gene expression in specific cell subpopulations in the ACC,suggesting that neurons may play an important role in the anxiety-like behavior induced by cystitis.This provides a new perspective for understanding the relationship between cystitis and anxiety behavior and offers important experimental evidence for future exploration of the brain regions and molecular mechanisms underlying cystitis-induced anxiety behavior.

Since the implementation of drug registration in China, the classification of Chinese medicine has greatly met the needs of public health and effectively guided the transformation, inheritance, and innovation of research achievements on traditional Chinese medicine(TCM). In the past 30 years, the development of new Chinese medicine has followed the registration transformation model of " one prescription for single drug". This model refers to the R&D and registration system of modern drugs, and approximates to the " law-abiding" medication method in TCM clinic, while it rarely reflects the sequential therapy of syndrome differentiation and comprehensive treatment with multiple measures. In 2017, Opinions on Deepening the Reform of Review and Approval System and Encouraging the Innovation of Drugs and Medical Devices released by the General Office of the CPC Central Committee and the General Office of the State Council pointed out that it is necessary to " establish and improve the registration and technical evaluation system in line with the characteristics of Chinese medicine, and handle the relationship between the traditional advantages of Chinese medicine and the requirements of modern drug research". Therefore, based on the development law and characteristics of TCM, clinical thinking should be highlighted in the current technical requirements and registration system of research and development of Chinese medicine. Based on the current situation of registration supervision of Chinese medicine and the modern drug research in China, the present study analyzed limitations and deficiency of " one prescription for single drug" in the research and development of Chinese medicine. Additionally, a new type of " series prescriptions" was proposed, which was consistent with clinical thinking and clinical reality. This study is expected to contribute to the independent innovation and high-quality development of the TCM industry.
China ; Drugs, Chinese Herbal/therapeutic use* ; Medicine, Chinese Traditional ; Prescriptions ; Public Health

Objective: To understand the incidence of pneumoconiosis in Ningbo city from 1967 to 2019, and to analyze the distribution characteristics and change trend of pneumoconiosis. Methods: In February 2021, the data of pneumoconiosis patients in Ningbo city from 1967 to 2019 were sorted out. The data from 1967 to 1987 were from historical case files of Zhejiang Center for Disease Control and Prevention, the data from 1988 to 2005 were from the historical case files of Ningbo Center for Disease Control and Prevention, and the data from 2006 to 2019 were from the pneumoconiosis report card in China Disease Prevention and Control Information System; Followed up and supplement relevant information, including basic information, basic information of employers and information related to pneumoconiosis diagnosis, and comprehensively analyze the composition and development trend, population characteristics and industry characteristics of pneumoconiosis. Results: From 1967 to 2019, a total of 1715 cases of pneumoconiosis were reported in Ningbo City, including 1254 cases of stageⅠpneumoconiosis, 258 cases of stageⅡpneumoconiosis, 172 cases of stage Ⅲpneumoconiosis. 1202 cases of silicosis (70.09%) , 296 cases of asbestosis (17.26%) , 40 cases of welder's pneumoconiosis (2.33%) , 32 cases of graphite pneumoconiosis (1.87%) were reported. There were 1296 male cases (75.57%) and 419 female cases (24.43%) were reported. Silicosis (91.15%, 1102/1209) and welder's pneumoconiosis (100.00%, 40/40) were the most common pneumoconiosis in males, while asbestosis (90.24%, 268/297) and graphite pneumoconiosis (87.50%, 28/32) were the most common pneumoconiosis in females. The average age was (49.71±10.90) years old and the average length of service was (10.98±6.96) years. The top three reported pneumoconiosis cases were construction industry (336 cases, 19.59%) , ferrous metal smelting and rolling industry (317 cases, 18.48%) and non-metallic mineral products industry (315 cases, 18.37%) . The top three reported pneumoconiosis cases were 414 cases (24.14%) in Ninghai County, 294 cases (17.14%) in Yuyao City and 272 cases (15.86%) in Yinzhou District. Conclusion: With the development of industries in Ningbo City, government departments should strengthen supervision and management of enterprises involving silica dust and welding fume to curb the high incidence of pneumoconiosis.
Adult ; Asbestosis ; China/epidemiology* ; Female ; Graphite ; Humans ; Incidence ; Male ; Middle Aged ; Pneumoconiosis/epidemiology* ; Pulmonary Fibrosis ; Silicosis/epidemiology*

Disabled Persons/rehabilitation* ; Humans ; International Classification of Diseases ; International Classification of Functioning, Disability and Health

Objective: To analyze the post distribution of dust concentration in ferrous metal foundry enterprises and evaluate the occupational health risks, and provide basis for policies of the formulation of pneumoconiosis prevention and control. Methods: From August to September in 2020, the basic information, dust hazard information and occupational health management information of 59 ferrous metal casting enterprises were investigated, the dust concentration distribution was analyzed, and the risk assessment was carried out by using the quantitative assignment model. The dust concentration is tested by LSD method after logarithmic treatment. The 3 times time weighted average allowable exposure concentration of dust is taken as the peak concentration limit of dust; The time weighted average allowable exposure concentration of dust converted by exposure time is taken as the time weighted average exposure concentration limit of dust, and whether the time weighted average exposure concentration and peak concentration of dust at the same post exceed the limit is taken as the basis for exceeding the limit of dust post concentration to calculate the post exceeding the limit rate. Results: The dust hazards were mainly distributed in the posts of sand treatment, molding, sand falling, sand cleaning and cutting and grinding. Dust exposure time weighted average concentration was 0.44 (0.03, 5.11) mg/m(3), peak exposure concentration was 1.30 (0.18, 10.94) mg/m(3), and the over standard rate of Posts was 38.92% (79/203) . Weighted average exposure concentration of other dust (total dust) in the cutting and grinding post is 1.50 (0.15, 7.40) mg/m(3), peak exposure concentration is 0.90 (0.07, 12.48) mg/m(3), and the post exceedance rate is 4.88% (2/41) . Weighted average exposure concentration of silica dust (exhaling dust) in dust operation posts of investment casting enterprises is 0.43 (0.05, 6.35) mg/m(3), peak exposure concentration is 0.90 (0.12, 8.28) mg/m(3), and the post over standard rate is 35.77% (49/137) ; Weighted average exposure concentration of other dust (total dust) at the cutting and grinding post is 2.00 (11.00, 21.00) mg/m(3), and the post exceedance rate is 2.50% (2/80) . There was no significant difference in the concentration of respirable dust between sand casting and investment casting (P>0.05) . The concentration of respirable dust in sand casting was higher than that in sand treatment, molding and sand cleaning posts (P<0.05) . The concentration of silica dust in investment casting was higher than that in sand treatment and molding posts, and that in sand cleaning posts was higher than that in sand treatment posts (P<0.05) . 98.48% (454/461) of the dust operation posts have an occupational health risk value greater than or equal to 400, and 1.52% (7/461) of the dust operation posts have an occupational health risk value of 200~399. Conclusion: there is a high rate of exceeding the standard in the dust work posts in the ferrous metal foundry enterprises in Ningbo, and the workers have a high occupational health risk of pneumoconiosis or metal and its compound pneumoconiosis. Targeted measures should be taken to reduce the occupational health risk.
Air Pollutants, Occupational/analysis* ; Dust/analysis* ; Humans ; Occupational Exposure/analysis* ; Pneumoconiosis ; Sand ; Silicon Dioxide/analysis*

Raynaud's phenomenon is a symptom complex manifested as intermittent fingertip ischemia caused by cold or other sympathetic drivers. Secondary Raynaud's phenomenon is often more severe and could even lead to finger ulceration, making it particularly complicated to treat. We describe a case of severe Raynaud's phenomenon secondary to subclinical hypothyroidism lasting for more than 6 hours in a 65-year-old woman. The patient was also diagnosed with hypothyroidism, epilepsy, and secondary soft tissue infection of the right middle and ring fingers. After careful multidisciplinary consultation and discussion, the patient received vasodilation, anticoagulation, thyroxine supplementation, stellate ganglion block, hyperbaric oxygen therapy and debridement. The patient responded well to the medication, avoiding amputation or obviously dysfunction. Multidisciplinary team gathering the doctors from different departments proposes appropriate strategies for patients with severe Raynaud's phenomenon and could improve the prognosis and satisfaction of patient effectively.
Female ; Humans ; Aged ; Hypothyroidism/complications* ; Raynaud Disease/diagnosis*

OBJECTIVE: To observe the clinical efficacy of thunder-fire moxibustion combined with mifepristone for ovarian chocolate cyst dysmenorrhea with kidney deficiency and blood stasis. METHODS: Seventy patients were randomly divided into an observation group and a control group, 35 cases in each group. The patients in the the control group were treated with oral administration of mifepristone, 10 mg each time, once a day; based on the treatment of the control group, the patients in the observation group were treated with thunder-fire moxibustion at Guanyuan (CV 4), Zigong (EX-CA 1), Xuehai (SP 10), once every other day. Both the groups were treated for 3 months. The Cox menstrual symptom scale (CMSS) score, the maximum cross-sectional area of ectopic cyst, and the serum levels of transforming growth factor-β1 (TGF-β1) and interleukin-17 (IL-17) were observed before and after treatment in the two groups. The clinical efficacy was evaluated. RESULTS: Compared before treatment, the severity scores and duration scores of CMSS as well as the serum levels of TGF-β1 were reduced after treatment in the two groups ( CONCLUSION Thunder-fire moxibustion combined with mifepristone could significantly improve dysmenorrhea symptoms, shorten dysmenorrhea time and promote atrophy of ovarian heterotopic cyst in patients with ovarian chocolate cyst dysmenorrhea of kidney deficiency and blood stasis, and the mechanism may be related to the reduction of serum levels of TGF-β1 and IL-17.
Acupuncture Points ; Chocolate ; Cysts ; Dysmenorrhea/drug therapy* ; Female ; Humans ; Kidney ; Mifepristone ; Moxibustion

Objective: To analyze the clinical characteristics of vestibular syncope (VS) associated with drop attacks (DA) in delayed endolymphatic hydrops (DEH). Methods: DEH cases with complete data were retrospectively analyzed, including three DEH cases with DA and VS (VS group), and six DEH cases without DA or VS (control group). The clinical profile, the results of neurotological examinations [such as pure tone audiometry, electrocochleography (EcochG), caloric test, vestibular evoked myogenic potentials (VEMP), and video head impulse test (vHIT)] and treatment outcomes were analyzed. Results: (1) In the VS group, there were three cases of ipsilateral DEH; in the control group, there were six cases of ipsilateral type. One case in each group had a history of migraine. (2) The prevalence of abnormal results in caloric test, vHIT, cervical VEMP, and ocular VEMP in the VS group was 3/3, 1/3, 2/2, and 2/2, respectively, and in the control group was 3/6, 0/3, 1/6, and 4/6, respectively. Two cases in each group underwent EcochG, and no identifiable waveform was elicited on the affected side, and-SP/AP ratio of unaffected side was less than 0.4. (3) Patients in both groups were initially treated with conservative medication. Two cases in the VS group subsequently received intratympanic injections of dexamethasone. No DA or VS occurred during a follow-up period lasting over one year. All patients achieved good control of vertigo during the follow-up period. Conclusions: VS may occur in the patients with DEH. The differential diagnosis of syncope in patients with otogenic vertiginous disease can help improve clinical diagnosis and treatment.
Endolymphatic Hydrops/diagnosis* ; Humans ; Retrospective Studies ; Syncope ; Vestibular Evoked Myogenic Potentials ; Vestibule, Labyrinth

Objective To study fluid flow within alveolar bone under orthodontic and occlusal loading, so as to provide references for understanding the regulatory mechanism of bone remodeling during orthodontics. Methods An animal model for orthodontic tooth movement on rats was first constructed. The finite element model of tooth-periodontal ligament-alveolar bone was established based on micro-CT images and the strain field in alveolar bone under orthodontic or constant occlusal loading was analyzed. Then finite element model of alveolar bone was constructed from the bone near the cervical margin or apical root of mesial root. The fluid flow in this model under orthodontic and cyclic occlusal loading was further predicted by using fluid-solid coupling numerical simulation. Results The fluid velocity within alveolar bone cavity mainly distributed at 0-10 μm/s, and the fluid shear stress (FSS) was mainly distributed at 0-10 Pa. FSS on the surface of alveolar bone near the apical root was higher than that close to the cervical margin. Conclusions FSS at different levels could be produced at different location within alveolar bone cavity under orthodontic and cyclic occlusal loading, which might further activate biological response of bone cells on the surface of trabeculae and finally regulate the remodeling of alveolar bone and orthodontic movement of tooth. The results provide theoretical guidance for the clinical treatment of orthodontics.