OBJECTIVES: This study aimed to investigate the feasibility of measuring the soft tissue height of bone cristae around implant by digital method. METHODS: A total of 36 patients with dental implants were selected from the Dental Medicine Center of the First Affiliated Hospital of University of Science and Technology of China (Anhui Provincial Hospital) from August 2022 to December 2022. A total of 43 dental implants were enrolled. All postoperative cone beam CT (CBCT) imaging data and intraoral digital impressions obtained before surgery were immediately obtained by the patients on the day of completion of oral implant surgery and they were imported into oral implant surgery planning software for image fitting. Then, virtual implants of the same specification were placed in the planting area, and the implant position was adjusted to overlap with the implant shadow in the CBCT image. Supracrestal tissue height (STH) was measured at the implant view interface (digital group). During the operation, implant holes were prepared step by step in accordance with the standard preparation method, and implants were implanted. The upper edge of the implant was flushed with the crest of the alveolar ridge. STH was measured by perio-dontal probing (periodontal probe group). Paired t-test was used to compare the STH differences between the digital and periodontal probe groups. Bland-Altman test was used to analyze the consistency of the two methods. Intra-group correlation coefficient (ICC) was used to verify the reliability of the results measured by different surveyors using di-gital methods. RESULTS: No statistical significance was observed in the STH difference between the two methods (P>0.05). Bland-Altman test showed good consistency between the two methods, but the measurement of mandibular posterior teeth showed that the results of periodontal probe were greater than those of digital method. The ICC and 95%CI of the STH results measured digitally by different surveyors are 0.992 (0.986-0.996). CONCLUSIONS The digital me-thod is in good agreement with the periodontal probe method in measuring the soft tissue height of the bone cristae around the implant.
Humans ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography/methods* ; Dental Implants ; Feasibility Studies ; Reproducibility of Results ; Tooth/diagnostic imaging*

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.
Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Esthetics, Dental ; Female ; Gingiva/diagnostic imaging* ; Humans ; Incisor/diagnostic imaging* ; Male ; Maxilla/diagnostic imaging* ; Young Adult

OBJECTIVES: To explore the relationship between the height of alveolar bone resorption and sex and age in the adolescent dentition. METHODS: Multi-slice computed tomography (MSCT) was used to measure the height of alveolar bone resorption at labial, lingual, mesial and distal sites of teeth in 149 adolescents aged from 10 to 20 years. SPSS 25.0 software was used to analyze the relationship between the height of alveolar bone resorption and sex and age. RESULTS: There was no significant difference in the height of alveolar bone resorption between sex (P>0.05). The height of alveolar bone resorption was positively correlated with age in all types of teeth. The model constructed by combining the alveolar bone resorption height data of four sites (y=2.569x₁+3.106x₂+4.108x₃+1.451x₄-0.082, R²_max=0.756)had a better ability to infer age than that of combining two sites (y=5.942x₁+4.489x₂+0.612, R²_max=0.706) and a single site (R²_max=0.638). CONCLUSIONS The height of alveolar bone resorption is positively correlated with the age of adolescents. The combination of four sites has a stronger ability to infer the relationship between the height of alveolar bone resorption and age in adolescents and has higher accuracy in practical application.
Humans ; Adolescent ; Child ; Young Adult ; Adult ; Alveolar Process/diagnostic imaging* ; Cone-Beam Computed Tomography ; Bone Resorption/diagnostic imaging* ; Tomography, X-Ray Computed

OBJECTIVE: To explore the correlation among gingival thickness (GT), underlying alveolar bone thickness (BT), and other periodontal biotype characteristics in the maxillary anterior. METHODS: A total of 40 young volunteers with healthy periodontal were involved in this research. The periodontal probe was previously used to divide the gingiva from thick to thin. Two records were measured by cone beam CT (CBCT) GT, which was measured at the cement-enamel junction level; and BT, which was measured at 3 locations: 1, 3, 5 mm below the alveolar crest. Oral and gypsum measurements were used to analyze the associations of the crown width/crown length ratio (CW/CL), the keratinized mucosa width (KM), and the free gingival margin curvature. RESULTS: Significant difference in the GT was observed between the thick and thin biotypes, which were divided by periodontal probe (P<0.01). Difference was observed in each periodontal biotype characteristic between the thick (GT≥1 mm) and thin biotypes (GT<1 mm) (P<0.05). BT was positively associated with GT (r=0.293, P=0.001), CW/CL (r=0.273, P=0.003), KM (r=0.291, P=0.001), and free gingival margin curvature (r=0.290, P=0.001). CONCLUSIONS The transparency of the probing in the sulcus could analyze the GT qualitatively. The thick and thin biotypes have different periodontal biotype characteristics. Compared with individuals with thick biotype, those with thin biotype are susceptible to risk dental aesthetic.
Alveolar Process ; Cone-Beam Computed Tomography ; Gingiva ; Humans ; Maxilla ; Tooth Crown

Adequate bone volume is the primary condition for successful dental implants. However, sufficient bone volume is often encountered in the vertical direction, but the bone volume in the buccolingual direction is insufficient, making it less suitable to be implanted. If the traditional spitting technique is used in the mandible, fracture and necrosis can easily occur in the labial (buccal) bone plate due to the absence of elasticity, thick cortical bone, poor blood supply, and anastomotic branch. The two-stage ridge splitting technique can be used in patients with narrow alveolar ridge in the mandible. This study summarizes the principles and conditions of application, operational points, clinical efficacy, and analysis of the causes of buccal bone plate absorption.
Alveolar Bone Loss ; Alveolar Process ; Alveolar Ridge Augmentation ; Bone Transplantation ; Dental Implantation, Endosseous ; Dental Implants ; Humans ; Mandible ; surgery

OBJECTIVE: To measure the distance from cemento-enamel junction (CEJ) to alveolar crest (AC) of labial side of anterior teeth on skeletal Angle class III patients under direct vision during periodontal bone augmentation surgery and to make relevant analysis to find the relevant factors. METHODS: In the study, 46 skeletal Angle class III patients (10 males and 36 females) received periodontal bone augmentation surgery of anterior teeth were included, with 67 jaws (27 maxillae and 40 mandibles) and 400 anterior teeth (161 maxillary anterior teeth and 239 mandibular anterior teeth). The mean age was 23.65 years. Maxillary anterior teeth consisted of 54 central incisors, 53 lateral incisors and 54 canines. Mandibular anterior teeth consisted of 79 central incisors, 80 lateral incisors and 80 canines. CEJ-AC was measured in three sites (mesial sites, central sites and distal sites) by Williams periodontal probes during periodontal bone augmentation surgery under direct vision by the same researcher. RESULTS: The average CEJ-AC of 400 anterior teeth was (2.21±1.48) mm. The average CEJ-AC of maxillary anterior teeth was (1.72±1.13) mm, more than (2.54±1.60) mm of mandibular anterior teeth (P<0.05). The average CEJ-AC of canines was (2.42±1.78) mm, more than (2.06±1.27) mm of central incisors or (2.16±1.32) mm of lateral incisors (P<0.05). The average CEJ-AC of central sites was (3.04±2.01) mm, more than (1.79±0.86) mm of mesial sites or (1.81±0.89) mm of distal sites (P<0.05). CEJ-AC of 233 anterior teeth was more than 2 mm, accounting for 58.25%, and 117 anterior teeth with dehiscence were found, accounting for 29.25%. Multilevel and multivariate Logistic regression showed age, jaw, tooth and site were the relevant factors to the position of alveolar crest. CONCLUSION The position of alveolar crest of skeletal Angle class III patients who received periodontal bone augmentation surgery was lower than that of the general population, causing periodontal risks during decompensation orthodontics therapy before orthognathic surgery. The position of alveolar crest was lower in older patients than in younger patients, in mandibular teeth than in maxillary teeth, in canines than in central incisors or lateral incisors, and in central sites than in mesial sites or distal sites of labial side, which showed much higher risk.
Alveolar Process ; Cone-Beam Computed Tomography ; Female ; Humans ; Male ; Malocclusion, Angle Class III ; Mandible ; Maxilla ; Young Adult

OBJECTIVE: To observe and investigate the effect of vertical soft tissue thickness on the peri-implant tissue condition and the prevalence of peri-implant disease in patients with history of periodontitis. METHODS: Among 210 patients who showed initial interest of implant therapy, 92 patients were included in this study and received implant surgery during 2010 and 2015. Sixty-six patients with 66 implants finally came back for T2 evaluation. Prior to the implant therapy, all the patients had received periodontal treatment. During the implant placement surgery, the distance from palatal soft tissue edge to the alveolar crest, which was defined as vertical soft tissue thickness (VT), was measured after the buccal full thickness flap was elevated. According to the cut off point which was adopted from the operating characteristic curve, 66 implants within 66 patients were divided into two groups, which were called normal group (VT≤4.5 mm) and thick group (VT>4.5 mm), respectively. Information of the patient's general status, periodontal situation and implant information were recorded. After a follow-up period of 42.9 months, the parameters of peri-implant tissue and condition of peri-implant disease were recorded. Mann-Whitney U test as well as Chi-square test were used to compare the parameters between two groups. Moreover, Kaplan-Meier method was chosen to draw the event(peri-implantitis)-free survival curve. RESULTS: The survival rate of the implants was 100%. At the end of the follow-up examination(T2), the parameters including max PDi, mean PDi, max BIi, mean BIi, mean MBL, MBL at distal side, MBL at mesial side, mean PLIi presented significantly higher values in thick group than in normal group (P < 0.05). Moreover, the prevalence of peri-implantitis and peri-implant disease (peri-implant mucositis & peri-implantitis) in thick group was respectively 34.8% and 73.9%, which was significantly higher than 2.3% and 48.8% respectively in normal group (P<0.05). The prevalence of peri-implant mucositis did not show significant difference in the two groups. In addition, Kaplan-Meier analysis showed that there was significant difference between the event-free survivals of the two groups. CONCLUSION The vertical soft tissue thickness around implants in patients with periodontitis has a significant effect on the health of the peri-implant tissue. Excessive vertical soft tissue thickness may result in deeper peri-implant probing depth as well as more peri-implant marginal bone loss, and eventually increase the risk of peri-implant disease. The vertical remodeling of soft tissue may be a new direction to indicate the role of periodontitis in peri-implant tissue condition. Moreover, the biological mechanism of the association between soft tissue thickness and peri-implantitis risk as well as effective approaches to prevent the adverse effect of excessive soft tissue thickness on peri-implant tissue is necessary to be investigated.
Alveolar Bone Loss ; Alveolar Process ; Dental Implants ; Humans ; Mucositis ; Peri-Implantitis ; Periodontitis ; Tooth

At the department of prosthodontics, the elderly patients with severely atrophied alveolar ridge who have been wearing complete dentures for a long period frequently visit the clinic. In general, the open-mouth impression technique for manufacturing a mandibular complete denture to secure primary support on buccal shelf area has been prevalent. In addition, for securing retention and stability of mandibular denture, we should consider diagnosis, oral function, denture border, occlusal plane, teeth arrangement, and patient training, etc.. But in edentulous patients with severe alveolar bone atrophy, it may hardly secure retention and stability of mandibular complete denture. To promote these, some of clinicians are making an attempt manufacturing the mandibular complete dentures using closed-mouth impression technique based on several reports that compare various impression techniques including open-mouth and closed-mouth impression technique. This case report suggests closed-mouth impression technique may promote retention and stability of mandibular complete denture and compares between the two impression techniques clinically.
Aged ; Alveolar Bone Loss ; Alveolar Process ; Dental Occlusion ; Denture, Complete ; Dentures ; Diagnosis, Oral ; Humans ; Jaw, Edentulous ; Prosthodontics ; Tooth

PURPOSE: This study aimed to introduce a novel method to evaluate the alveolar bone and interdental septum in the anterior mandible using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Fifty-six CBCT scans from adult patients were selected. The CBCT scans were obtained before and after orthodontic treatment. The following measurements were taken: width of the alveolar bone and the interdental septum, height of the interdental septum, height of the bone plates, distance between the cementoenamel junction and marginal bone crests, and vertical positioning of the mandibular incisor, using the lingual plane as a reference. To test the reproducibility and the stability of the lingual plane, a triangle was traced in the anterior mandible. The intra-class correlation coefficient (ICC) was used to determine intra- and inter-examiner agreement. The paired Student t-test was used to evaluate the area of the triangle and the reproducibility of all measurements. RESULTS: The ICC was excellent for the alveolar bone and dental measurements (0.9989 and 0.9977, respectively), as well as for the interdental septum (0.9987 and 0.9961, respectively). The area of the triangles showed stability in the lingual plane (P>0.05). For the alveolar bone, mandibular incisor, and interdental septum measurements, no statistically significant differences were found between the 2 examiners (P>0.05), confirming the technical reliability of the measurements. CONCLUSION: The method used in this study provides a valid and reproducible assessment of alveolar bone dimensions in the anterior mandible measured on CBCT images.
Adult ; Alveolar Bone Loss ; Alveolar Process ; Bone Plates ; Cone-Beam Computed Tomography ; Humans ; Incisor ; Mandible ; Methods ; Tooth Cervix

As the number of elderly population increases, the proportion of edentulous patients is increasing, and the demand for traditional dentures will also increase. Arranging the artificial teeth according to the relationship and shape of the upper and lower alveolar ridge is an important factor increasing the stability of the denture. This case is a 79 year old female patient who wishes to make denture covered by national health insurance for psychological and economical reasons. With the alveolar bone severely atrophic, the dental CAD software was used for accurate diagnosis and the posterior teeth were arranged in a cross bite according to the interalveolar crest line angle by the program. After completion, the denture showed adequate stability and maintenance in periodic examinations and treatment, and the patient also expressed high satisfaction.
Aged ; Alveolar Process ; Denture, Complete ; Dentures ; Diagnosis ; Female ; Humans ; Malocclusion ; National Health Programs ; Rehabilitation* ; Tooth ; Tooth, Artificial