The adhesive protein secreted by marine sessile animals can resist the resistance of water and exert stickiness under the humid environment. It has become a candidate for the development of high-performance materials in the field of biomedicine and bionics. Barnacles are as one of the marine macrofoulers that can be firmly attached to the underwater substrate materials with different surface characteristics through its cement proteins. To date, the adhesion process of barnacle has been understood in-depth, but the specific underwater adhesion mechanism has not been elucidated and needs further exploration. This review first presented an overview of barnacle and its adhesion process, followed by summarizing the advances of barnacle adhesive protein, its production methods, and applications. Moreover, challenges and future perspectives were prospected.
Animals ; Thoracica/metabolism* ; Proteins/metabolism* ; Adhesives/metabolism*

Objective: To study the effect of hydroxyapatite (HA) based agents on the bonding properties of universal adhesive with different application modes, and to provide evidence for the use of adhesives after desensitization treatment. Methods: Sixty impacted third molars were extracted and selected (acquired from Department of Oral and Maxillofacial Surgery, College of Stomatology, Xi'an Jiaotong University). Four third molars were used to prepare 1 mm thick dentin disks and treated with 1% citric acid to simulate sensitive tooth models. The dentin surfaces were observed by scanning electron microscope (SEM) after treating with no desensitization (control group), desensitized by HA based toothpaste Biorepair and Dontodent Sensitive respectively (desensitizing toothpaste A group and B group), or HA paste treatment (desensitizing paste group ) (n=2 per group). The remaining teeth were selected to expose the mid-coronal dentin and establish dentin sensitivity models. Then, the specimens were divided into 4 former groups and received corresponding treatment. Each group was randomly divided into 2 subgroups, and intermediately strong universal adhesive (G-Premio Bond) was applied on the desensitized dentin by either etch-and-rinse mode or self-etch mode. Resin-dentin slice specimens (n=4 per subgroup), microtensile specimens (n=20 per subgroup) and slice specimens (n=6 per subgroup) were prepared. The microstructure and nanoleakage of the adhesive interfaces were observed by scanning electron microscopy (SEM). The microtensile strength (bond strength) and fracture mode were tested and recorded. The water permeability of the adhesive interface was observed by laser scanning confocal microscopy (LSCM). Results: SEM showed that desensitizing toothpaste and desensitizing paste could partially or entirely occlude most of the dentin tubules. For the etch-and-rinse mode, the bond strength of specimens treated with toothpaste A [(40.98±4.60) MPa], toothpaste B [(40.89±4.64) MPa] and HA paste [(41.48±3.65) MPa] was significantly higher than that of the control group [(38.58±4.28) MPa] (F=3.89,P<0.05). There was no statistically significant difference in bond strength among the 4 subgroups for self-etch modes (F=0.48,P>0.05). After desensitization, the bond strength of the control group and desensitizing groups in the self-etch mode was significantly higher than that in the etch-and-rinse mode (P<0.05). The overall fracture modes were mixed failure and interfacial failure in the control group and desensitizing groups. SEM showed speckled silver-stained particles deposited along the bottom of the hybrid layer on the bond interface of etch-and-rinse mode, and there were few silver-stained particles deposited on the bond interface of self-etch mode. LSCM showed continuous linear penetration in the hybrid layer of etch-and-rinse mode subgroups and discontinuous linear penetration in the hybrid layer of self-etch mode subgroups. Conclusions: HA based desensitizers have no adverse effect on the bond strength of intermediately strong universal adhesive and show good bonding performance accompanied with the self-etch mode.
Adhesives ; Dental Bonding ; Dental Cements ; Dentin ; Dentin-Bonding Agents ; Durapatite ; Humans ; Materials Testing ; Microscopy, Electron, Scanning ; Resin Cements ; Tensile Strength

Objective: To investigate the effects of primary preventive treatment under endoscope for esophageal and gastric varices on bleeding rate and its relevant factors. Methods: 127 cases with liver cirrhosis accompanied with esophageal and gastric varices without bleeding history were included in the endoscopic and non-endoscopic treatment group, respectively. Informed consent was obtained from both groups. Gastric varices (Lgf) and esophageal varices (Leg) were diagnosed according to LDRf classification criteria, and the corresponding treatment scheme was selected according to the recommended principle of this method.The incidence rate of bleeding from ruptured esophageal varices were observed at 3, 6 months, and 1, and 2 years in the treated and the untreated group, and the patients with different Child-Pugh scores were followed-up for 2 years. Gender, age, etiology, varicose degree, Child-Pugh grade, platelet count, prothrombin activity, portal vein thrombosis, collateral circulation, portal vein width and other factors affecting the bleeding rate were assessed. Measurement data were described as mean ± standard deviation (x¯±s), and qualitative data of categorical variables were expressed as percentage (%), and χ² test was used. Results: 127 cases were followed up for 2 years. There were 55 cases in the endoscopic treatment group (18 cases underwent band ligation, 2 cases underwent band ligation combined with tissue adhesive embolization, 28 cases underwent sclerotherapy, and 7 cases underwent sclerotherapy combined with tissue adhesive embolization). Recurrent bleeding and hemorrhage was occurred in 5 (9.1%) and 28 cases (38.9%), respectively (P<0.05). In addition, there were 72 cases in the untreated group (P<0.05). Severe varicose veins proportions in treated and untreated group were 91.1% and 85.1%, respectively (P>0.05). There was no statistically significant difference in liver cirrhosis-related medication and β-blocker therapy between the treated and untreated group (P>0.05). There was no statistically significant difference in the bleeding rate between the different treated groups (P>0.05). The bleeding rates at 3, 6 months, 1, and 2 years in endoscopic treated and untreated group were 2.00% vs. 2.59% (P>0.05), 2.30% vs. 5.88% (P>0.05), 3.10% vs. 7.55% (P>0.05) and 4.00% vs. 21.62% (P<0.05), respectively. All patients with Child-Pugh grade A, B and C in the treated and the untreated group were followed-up for 2 years, and the bleeding rates were 1.8% vs. 8.1% (P<0.05), 1.1% vs. 9.4% (P<0.05) and 9.1% vs. 10.1% (P>0.05), respectively. There were statistically significant differences in the rupture and bleeding of esophageal and gastric varices, varices degree, Child-Pugh grade and presence or absence of thrombosis formation in portal vein (P<0.05); however, no statistically significant differences in gender, age, etiology, platelet count, prothrombin activity, collateral circulation and portal vein width (P>0.05). There was no intraoperative bleeding and postoperative related serious complications in the treated group. Conclusion: The risk of initial episodes of bleeding from esophageal and gastric varices is significantly correlated with the varices degree, Child-Pugh grade, and portal vein thrombosis. Primary preventive treatment under endoscope is safe and effective for reducing the long-term variceal bleeding risk from esophageal and gastric varices.
Endoscopes ; Esophageal and Gastric Varices/complications* ; Gastrointestinal Hemorrhage/surgery* ; Humans ; Hypertension, Portal/complications* ; Ligation ; Liver Cirrhosis/complications* ; Prothrombin ; Sclerotherapy ; Tissue Adhesives ; Varicose Veins ; Venous Thrombosis/complications*

Objective: To evaluate the auditory efficacy and subjective satisfaction of adhesive bone conduction hearing aid in children with unilateral congenital aural atresia (UCAA). Methods: Ten subjects (5 males and 5 females) diagnosed with UCAA with an average age of 8.3 years old (ranged from 5 to 15) were included in Beijing Tongren Hospital, Capital Medical University from January to August 2019. The free sound field hearing threshold, word recognition score in quiet, speech reception threshold in noise and sound localization ability (results were measured by RMS error) tests were performed in unaided and aided situation, respectively. Subjective satisfaction questionnaires were also distributed to subjects. Paired t test and Wilcoxon signed rank test were used as statistical analysis methods. Results: The average hearing threshold in aided condition was improved by (21.9±4.4) dB (t=15.8，P<0.05). Speech recognition abilities were generally improved both under quiet and noise (P<0.05);however, when the binaural summation, squelch and head shadow effects were analyzed respectively, the binaural squelch effect was not statistically improved (P>0.05), while the other effects were improved in aided condition (P<0.05). In sound localization test, there was no significant difference of the RMS error value between the unaided and aided situation (P>0.05). The subjects got high satisfaction rates in three subjective questionnaires. Conclusion: The adhesive bone conduction hearing aid can provide significant audiological benefit for children with UCAA as well as raising the quality of their life.
Adhesives ; Adolescent ; Bone Conduction ; Child ; Child, Preschool ; Female ; Hearing Aids ; Hearing Loss, Conductive ; Humans ; Male ; Speech Perception ; Treatment Outcome

Hot melt pressure-sensitive adhesive(HMPSA) has broad application potential in the field of traditional Chinese medicine(TCM) plasters due to its high drug loading, weak skin irritation, satisfactory adhesion, etc. compared with rubber plasters.However, the structure of HMPSA is prone to suffer from the damage caused by volatile oils in TCM plasters. In view of this, a kind of HMPSA with a stable structure was prepared by physical blending of DINCH, polypropylene wax and liquid rubber(LIR) in the present study, which is denoted as DPL. The dosage of cinnamon volatile oil(CVO), the model drug, was selected with viscosity, softening point and cohesion as evaluation indexes. The interaction between DPL and HMPSA was investigated by Fourier transform infrared spectroscopy(FT-IR) and differential scanning calorimetry(DSC). The compatibility of HMPSA with CVO and its transdermal ability were studied by in vitro transdermal test, adhesion, scanning electron microscopy( SEM) and rheological evaluation. The results showed that 5% CVO began to damage the structure of HMPSA. The initial adhesion and holding adhesion of DPL-modified HMPSA(DPL-HMPSA) were not significantly changed compared with those of HMPSA, whereas the 180° peel strength was decreased. FI-IR unraveled that DPL formed the n-π conjugated system with styrene-isoprene-styrene block copolymer(SIS), and there was no significant difference in the glass transition temperature according to DSC results, which indicated the good compatibility of DPL with HMPSA. With 5% CVO loaded, the drug content of DPL-HMPSA was 1. 14 times higher than that of HMPSA, and the decrease rate of drug content in DPL-HMPSA was 16% lower than that in HMPSA after 3 months. SEM demonstrated that CVO did not cause obvious structural damage to DPL-HMPSA. Rheological evaluation revealed that the storage modulus and loss factor of DPL-HMPSA were higher than those of HMPSA, and the cohesion was also stronger. The percutaneous penetration rate of cinnamaldehyde in DPL-HMPSA was 2. 25 times that of HMPSA. In conclusion, DPL-HMPSA had more stable structure, better compatibility with CVO, and higher in vitro transdermal efficiency of cinnamaldehyde than before the modification. This study can provide reference for the mitigation of the matrix structure damage caused by volatile oil components in TCM plasters and the enhancement of the content and in vitro transdermal rate of drug.
Adhesives ; Administration, Cutaneous ; Cinnamomum zeylanicum ; Oils, Volatile ; Spectroscopy, Fourier Transform Infrared

OBJECTIVE: To study the safety of alginate based gastric mucosal protective adhesive and its feasibility as a submucosal injection. METHODS: The feasibility of using alginate-based gastric mucosal protective gel as submucosal injection was evaluated by RESULTS: After injection of different concentrations of alginate base mucosal protective adhesive solution, the uplift height was significantly higher than that of normal saline ( CONCLUSIONS Gastric mucosa protector is a promising new medical device product with feasibility and good biocompatibility as submucosal uplift injection agent.
Adhesives ; Alginates ; Animals ; Feasibility Studies ; Gastric Mucosa ; Injections ; Rats ; Swine

To investigate the effect of captopril on the dentin bonding durability of self-etch adhesive. Different concentrations of captopril ethanol solutions or captopril ethanol/water solutions were prepared to pretreat dentin as primer for the self-etch adhesives. The surface morphology of the dentin was observed with scanning electron microscopy (SEM). Based on the morphology analysis, the pretreatment condition was selected and two self-etch adhesives were employed to evaluate the improvement effect of the captopril pretreatment on the dentin bonding durability. : SEM showed that the pretreatment of captopril ethanol solutions and captopril ethanol/water solutions were able to remove the smear lay and partially expose collagen matrix. According to the SEM results, the pretreating condition of captopril ethanol/water solution with the pretreating time of was selected for further dentin bonding study. For Clearfil SEBOND system, the immediate bonding strength increased from to  (<0.05). After one-year aging, the bonding strength of the control group decreased markedly [(22.90±6.82) MPa, <0.05]; while the bonding strength of the captopril pretreated group kept steadily >0.05]. For Clearfil S BOND system, there was no significant difference in the immediate bonding strength between the experimental group [(4.07) MPa] and the control group[(4.11) MPa]. But after one-year aging, the bonding strength of the experimental group was higher than that of the control group <0.05]. : The pretreatment with captopril ethanol/water solution increases the dentin bonding strength of the self-etch adhesive systems and also improves the bonding durability.
Adhesives ; Captopril ; Dental Bonding ; Dentin ; Dentin-Bonding Agents ; Materials Testing ; Microscopy, Electron, Scanning ; Resin Cements

OBJECTIVE: To compare the bonding durability of three different self-etch adhesives to primary enamel and dentin, and to investigate the effect of mild salivary contamination followed by air drying on the bonding durability. METHODS: Two hundred and forty enamel specimens were divided randomly into 16 groups (n=15/group)according to the adhesive system [self-etch adhesives: Clearfil SE Bond(SE), AdperTM Easy One (EO), Scotchbond Universal (SBU); total-etch adhesive: AdperTM Single Bond Plus(SL)], contamination status (non-contaminated vs. salivary-contaminated) and storage condition (stored in distilled water for 24 h vs. aging mode 5 000 thermal cycles in 5 ℃ and 55 ℃). Two hundred and forty dentin specimens were assigned in the same way. Shear bond strength for 12 specimens in each group were measured. The adhesive interface for the residual specimens in each group was observed by scanning electron microscopy(SEM). Data were analyzed by three-way analysis of variance and Tukey test(P < 0.05). RESULTS: For primary enamel, total-etch adhesive showed higher initial shear bond strength values (28.92±1.83) MPa and shear bond strength values (27.27±3.03) MPa after thermal cycles compared with the other groups, and the difference between the groups was statistically significant (P < 0.01). Shear bond strength values of EO decreased significantly in salivary-treated groups, regardless of storage conditions, and the difference was statistically significant (P < 0.01). For primary dentin, shear bond strength values of EO decreased significantly in salivary-treated groups after 24 h (P < 0.01). After 5 000 thermal cycles, total-etch adhesive showed significantly lower shear bond strength values (14.31±1.97) MPa compared with the other groups, and the difference between the groups was statistically significant (P < 0.01), and shear bond strength values of EO were significantly lower than those in SE and SBU groups (P < 0.01), regardless of contamination status. CONCLUSION Total-etch adhesive SL has better bonding durability to primary enamel. SE and SBU have better bonding durability to primary dentin and have a certain resistance to salivary contamination, while the bonding performance of EO is compromised greatly by mild salivary contamination followed by air drying.
Acid Etching, Dental ; Adhesives ; Dental Bonding ; Dentin ; Dentin-Bonding Agents ; Materials Testing ; Resin Cements ; Shear Strength ; Tooth, Deciduous

Adenoviridae ; Adhesives ; Cell Culture Techniques ; Culture Media, Serum-Free ; Fluorescence ; Vero Cells

OBJECTIVES: The need for proper wound closure is of paramount importance after any intra-oral surgery. Various wound closure techniques have been described in literature using traditional non-absorbable suture materials. These include like synthetic absorbable sutures, surgical staples and tissue adhesives. Cyanoacrylates are among the most commonly used biocompatible tissue adhesives. To evaluate and compare intraoral wound healing using 3-0 silk sutures and n-butyl-2-cyanoacrylate after alveoloplasty.MATERIALS AND METHODS: A total of 20 patients requiring bilateral alveoloplasty in the same arch (upper or lower) were included in this study. Patients with any pre-existing pathology or systemic disease were excluded. After alveoloplasty was performed, the wound was closed using 3-0 braided silk sutures on one side, and using n-butyl-2-cyanoacrylate bio adhesive on the other side. Patients were evaluated based on the following parameters: time required to achieve wound closure; the incidence of immediate and postoperative hemostasis; the time to the use of the first rescue medication; the side where pain first arises; and the side where wound healing begins first.RESULTS: Compared to 3-0 silk sutures, cyanoacrylate demonstrated better hemostatic properties, reduced operative time, reduced postoperative pain and better wound healing.CONCLUSION: These data suggest that cyanoacrylate glue is an adequate alternative to conventional sutures to close the surgical wound after alveoloplasty, and better than are 3-0 silk sutures.
Adhesives ; Alveoloplasty ; Cyanoacrylates ; Enbucrilate ; Hemostasis ; Humans ; Incidence ; Operative Time ; Pain, Postoperative ; Pathology ; Silk ; Sutures ; Tissue Adhesives ; Wound Closure Techniques ; Wound Healing ; Wounds and Injuries