Humans ; Trauma Centers ; COVID-19/epidemiology* ; Workflow ; Singapore/epidemiology* ; Pandemics

OBJECTIVE: To automatically construct lips symmetry reference plane (SRP) based on posed smile, and to evaluate its advantages over conventional digital aesthetic design. METHODS: Eighteen subjects' three-dimensional facial and dentition data were gathered in this study. The lips SRP of experimental groups were used with the standard weighted Procrustes analysis (WPA) algorithm and iterative closest point (ICP), respectively. A reference plane defined by experts based on regional ICP algorithm, served as the truth plane. The angle error values between the lips SRP of WPA algorithm in the experimental groups and the truth plane were evaluated in this study, and the lips SRP of ICP algorithm of the experimental groups was calculated in the same way. The lips SRP based on posed smile as a reference for aesthetic design and evaluate preliminary clinical application. RESULTS: The average angle error between the lips SRP of WPA algorithm and the truth plane was 1.78°±1.24°, which was smaller than that between the lips SRP of ICP and the truth plane 7.41°±4.31°. There were significant differences in the angle errors among the groups (P < 0.05). In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile and the original symmetry plane by re-ference compared with the prosthetic design, the subjects' scores on the lips SRP of WPA algorithm based on posed smile (8.48±0.57) were higher than those on the original symmetry plane (5.20±1.31). CONCLUSION Automatically constructing the lips SRP of WPA algorithm based on posed smile was more accurate than ICP algorithm, which was consistent with the truth plane. Moreover, it can provide an important reference for oral aesthetic diagnosis and aesthetic analysis of the restoration effect. In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile can improve the patients' satisfaction in esthetic rehabilitation.
Esthetics, Dental ; Humans ; Lip ; Smiling ; Tooth ; Workflow

Objective: To compare the clinical performance of posterior single implant-supported monolithic zirconia crowns fabricated by full digital workflow and that of those fabricated by conventional workflow. Methods: This is prospective clinical research. Thirty-five patients who participated in a previous study during August 2017 to October 2018 at Department of Prosthodontics, Peking University School and Hospital of Stomatology were included in this 3-year follow-up study. The 35 patients, 17 females and 18 males, aged (49.0±15.4) years (24-86 years old), was allocated into two groups. In the full digital workflow group, intraoral scanning was taken immediately after implant placement, and a full zirconia implant crown was fabricated using model-free computer aided design/computer aided manufacturing (CAD/CAM) procedure (n=14). In the conventional group, a conventional impression was taken 3 months after implant placement and the stone model was produced. A full zirconia implant crown was fabricated using conventional model-based procedure (n=21). Three years following crown delivery, all the prostheses were evaluated in the aspect of color, surface roughness, contour and marginal integrity using modified US Public Health Service criteria (MUSPHS criteria). The soft and hard tissue around implant was evaluated using modified plaque index, probing depth (PD), number of implants with bleeding on probing, marginal bone loss (MBL). The biological and mechanical complication were also recorded. Statistical analysis was performed using independent samples t test, Mann-Whitney U test and Fisher's exact test. Results: The total survival rate of prosthesis and implant was 100% (35/35). No significant difference in MUSPHS criteria ratings on color, surface roughness, contour and marginal integrity of these crowns were found between the full digital workflow group and the conventional group (P>0.05). Sixteen out of the 35 crowns had a contour score of B due to loss of interproximal contact. Ten out of the 35 crowns had the screw hole sealing resin sinking or falling off, four in the full digital workflow group and six in the conventional group. There was no significant difference in the rate of prostheses mechanical complications between the two groups (P=1.000). For all the implants, there was no significant difference in MBL, PD, the modified plaque index, and number of implants with bleeding on probing between the two groups (U=119.50,133.00,142.50, t=-0.53, P>0.05). Conclusions: The clinical performance of implant-supported posterior single monolithic zirconia crowns fabricated by full digital workflow was stable. There was no significant difference in the clinical performance of the single implant crowns between the full digital workflow group and the conventional group.
Adult ; Aged ; Aged, 80 and over ; Crowns ; Female ; Follow-Up Studies ; Humans ; Male ; Middle Aged ; Prospective Studies ; United States ; Workflow ; Young Adult ; Zirconium

Severe cases infected with the coronavirus disease 2019 (COVID-19), named by the World Health Organization (WHO) on Feb. 11, 2020, tend to present a hypercatabolic state because of severe systemic consumption, and are susceptible to stress ulcers and even life-threatening gastrointestinal bleeding. Endoscopic diagnosis and treatment constitute an irreplaceable part in the handling of severe COVID-19 cases. Endoscopes, as reusable precision instruments with complicated structures, require more techniques than other medical devices in cleaning, disinfection, sterilization, and other reprocessing procedures. From 2016 to 2019, health care-acquired infection caused by improper endoscope reprocessing has always been among the top 5 on the list of top 10 health technology hazards issued by the Emergency Care Research Institute. Considering the highly infective nature of COVID-19 and the potential aerosol contamination therefrom, it is of pivotal significance to ensure that endoscopes are strictly reprocessed between uses. In accordance with the national standard "Regulation for Cleaning and Disinfection Technique of Flexible Endoscope (WS507-2016)," we improved the workflow of endoscope reprocessing including the selection of chemicals in an effort to ensure quality control throughout the clinical management towards COVID-19 patients. Based on the experience we attained from the 12 severe COVID-19 cases in our hospital who underwent endoscopy 23 times in total, the article provides an improved version of endoscopic reprocessing guidelines for bedside endoscopic diagnosis and treatment on COVID-19 patients for reference.
Adult ; Aged ; Aged, 80 and over ; Betacoronavirus ; China ; Coronavirus Infections ; diagnosis ; therapy ; Cross Infection ; prevention & control ; Disinfection ; methods ; Endoscopes ; virology ; Equipment Contamination ; prevention & control ; Female ; Humans ; Male ; Middle Aged ; Pandemics ; Peracetic Acid ; Personal Protective Equipment ; Pneumonia, Viral ; diagnosis ; therapy ; Sterilization ; methods ; Workflow

OBJECTIVES: To establish a system for control of cross-infection and workflow for preventing severe acute respiratory syndrome coronavirus 2 spread and ensuring the safety of medical staffs and patients in endoscopy center during the pandemic of the coronavirus disease 2019 (COVID-19). METHODS: Based on the national publication of relevant documents and relevant guidance of Digestive Endoscopy Branch of Chinese Medical Association, we explored and optimized the workflow, staff protection and sterilization of endoscope in digestive endoscopy center during the pandemic of the COVID-19. RESULTS: The prevention system of cross-infection and workflow in endoscopy during the pandemic of the COVID-19 were developed. The optimized workflow in endoscopy was conducted in 106 patients with necessary endoscopy from the Department of Gastroenterology, Third Xiangya Hospital, Central South University between January 24, 2020 and February 26, 2020, and no case of cross-infection was presented among the medical staffs, patients and family members. CONCLUSIONS Measures on control of cross-infection and workflow in digestive endoscopy center during the pandemic of the COVID-19 are effective, which are beneficial to preventing cross-infection in hospital and provide a scientific guidance for the general work in the digestive endoscopy centers during the pandemic of the COVID-19.
Betacoronavirus ; China ; Coronavirus Infections ; epidemiology ; prevention & control ; Cross Infection ; prevention & control ; Endoscopy ; Gastroenterology ; organization & administration ; Humans ; Pandemics ; prevention & control ; Pneumonia, Viral ; epidemiology ; prevention & control ; Workflow

OBJECTIVE: To evaluate the digital workflow coupling conic retention for the immediate restoration of adjacent posterior implants. METHODS: The patients with adjacent teeth missing in the posterior jaw seeking for implant restoration in the Department of Implantology, Peking University School and Hospital of Stomatology from March, 2017 to February, 2018 were recruited. After implant placement and commercial conic retention coping delivery, the patient had an intraoral scan for digital impression, and the computer-assisted design/computer-assisted manufacturing (CAD/CAM) technology was used for the fabrication of the immediate splinted prosthesis, which was made of polymethyl methacrylate (PMMA) and loaded immediately after delivery. Six months later, all the temporary prostheses were replaced by the permanent ones made of monolithic zirconia with CAD/CAM technology as well. The parallel periapical films were taken for the temporary and permanent prostheses post-delivery. The clinical effect of this workflow was evaluated by indices including the survival rates of implants and prostheses, the change of marginal bone level, and the implant-related and prosthesis-related complications; before the final restoration, the Visual Analogue Score (VAS) was used to evaluate the satisfaction of the patients. RESULTS: Ten patients (4 males and 6 females, 55.5 years old for average) were recruited. Totally 34 implants were placed; 14 prostheses were fabricated, temporary and permanent, respectively. After an observation period from 4 to 14 months, the survival rate for implants and prostheses were both 100%; the marginal bone level of the implants were (1.06±0.97) mm and (0.96±0.82) mm, immediate post-operation and 6 months later, respectively. The difference was not statistically significant (P>0.05). Neither implant- nor prostheses- related complications were observed. And the VAS of the patients' satisfaction was 87.2. CONCLUSION For the adjacent posterior implants, the immediate prostheses manufactured by digital workflow, coupling conic retention, were clinically feasible and patient-satisfactory.
Computer-Aided Design ; Female ; Humans ; Male ; Middle Aged ; Patient Satisfaction ; Prostheses and Implants ; Prosthesis Implantation ; Workflow

The COVID-19 pandemic has had a major impact in healthcare systems across the world, with many hospitals having to come up with protocols and measures to contain the spread of the virus. This affects various specialties' clinical practices in many ways. Since early 2020 in Singapore, the Department of Otorhinolaryngology at Tan Tock Seng Hospital had to rapidly adapt to this pandemic as we provided services to the main healthcare facility combating the virus in our country. We had to design new workflows and also remain flexible in view of the ever-changing situation. There are 6 important domains for an otolaryngology department or any clinical department in general to consider when making adjustments to their practices in an outbreak: (1) clinical work, (2) education, (3) research, (4) safety of patients and staff, (5) morale of medical staff and (6) pandemic frontline work. We hope that the sharing of our experiences and the lessons learnt will be useful for both our local and international colleagues.
Ambulatory Care ; Biomedical Research ; COVID-19/prevention & control* ; Delivery of Health Care/methods* ; Education, Medical ; Elective Surgical Procedures ; Health Workforce ; Humans ; Morale ; Otolaryngology/methods* ; Otorhinolaryngologic Surgical Procedures ; Personal Protective Equipment ; Personnel Staffing and Scheduling ; SARS-CoV-2 ; Singapore/epidemiology* ; Workflow

OBJECTIVE: To establish a complete workflow of digital design and manufacturing occlusal splint for sleep bruxism, which can be preliminarily applied in clinical use, thus observe the clinical efficacy. METHODS: Twenty-four patients with sleep bruxism were recruited in the study and randomly divided into two groups by using random number tables. Digital-occlusal-splint (experimental group) treatment plan and traditional-occlusal-splint (control-group) treatment plan were carried out for each group, respectively. For experimental group, digital models of patients' both dental arches and the occlusion relationship after elevation were captured using an intraoral scanner. The occlusal splint was carried out by computer aided design/computer aided manufacturing (CAD/CAM), including splint designing and milling. For control group, the traditional soft occlusal splint was fabricated by vacuum laminator. The two kinds of occlusal splints were tried in the patients from each group, and the occlusal contacts were tested respectively by T-scan analysis system, which recorded the changes of occlusal indicators in the two groups. The retention, appearance and occlusal comfort degree were evaluated by the two groups of patients. Mann-Whitney test was performed with IBM SPSS 20.0 software, and bilateral test was performed. P<0.05 was considered to be statistically significant. RESULTS: The complete workflow of digital design and manufacturing occlusal splint was successfully established. During the clinical use, there was no statistical difference in the retention evaluation of two kinds of occlusal splints between the two groups of patients (Z=-0.538, P=0.590). The appearance score (Z=2.038, P=0.042) and the occlusal comfort score (Z=-2.579, P=0.010) of the experimental group were higher than those of the control group, with statistically significant differences. The T-scan analysis results showed that only the second molar on both sides of the traditional occlusal splint had occlusal contact in intercupsal position, while the digital occlusal splint had stable and bilaterally balanced contact between the maxillary and mandibular teeth. Furthermore, the occlusal force was uniformly distributed in the experimental group. CONCLUSION The complete workflow of digital occlusal splint improves the occlusal design, greatly simplifies and optimizes the traditional process of making occlusal splint. This new method is resource-saving and environmental-friendly, and it is able to serve patients more conveniently and efficiently.
Dental Arch ; Dental Occlusion ; Humans ; Occlusal Splints ; Sleep Bruxism ; Workflow

Computer aided design and manufacturing and implant surgery using a guide template improve restoration-driven implant treatment procedures. This case utilized those digital technologies to make definitive prostheses for a patient. According to the work flow of digital dentistry, cone beam computed tomography established the treatment plan, which was followed to make the guide template for implant placement. The template guided the implants to be installed as planned. The customized abutments and surveyed fixed restorations were digitally designed and made. The metal framework of the removable partial denture was cast from resin pattern using an additive manufacturing technique, and the artificial resin teeth were replaced with the zirconia onlays for occlusal stability. These full mouth rehabilitation procedures provided functionally and aesthetically satisfactory results for the patient.
Computer-Aided Design ; Cone-Beam Computed Tomography ; Dentistry ; Denture, Partial, Removable ; Humans ; Inlays ; Mouth Rehabilitation* ; Mouth* ; Prostheses and Implants ; Tooth ; Workflow

The present study was designed to develop a practical strategy to tackle the problem of lacking standard compounds and limited references for identifying structure-related compounds in Streptocaulon griffithii Hook. f., especially those in trace concentrations, with a focus on antitumor activity. The cardiac glycosides (CGs)-enriched part was determined using in vitro bioactive assays in three cancer cell lines and then isolated using macroporous resins. The MS and MS/MS data were acquired using a high performance liquid chromatography coupled with hybrid quadrupole-time of flight (HPLC-Q-TOF-MS) system. To acquire data of trace compound in the extract, a multiple segment program was applied to modify the HPLC-Q-TOF-MS method. A mass defect filter (MDF) approach was employed to make a primary MS data filtration. Utilizing a MATLAB program, the redundant peaks obtained by imprecise MDF template calculated with limited references were excluded by fragment ion classification, which was based on the ion occurrence number in the MDF-filtered total ion chromatograms (TIC). Additionally, the complete cleavage pathways of CG aglycones were proposed to assist the structural identification of 29 common fragment ions (CFIs, ion occurrence number ≥ 5) and diagnostic fragment ions (DFIs, ion occurrence number < 5). As a result, 30 CGs were filtered out from the MDF results, among which 23 were identified. This newly developed strategy may provide a rapid and effective tool for identifying structure-related compounds in herbal medicines.
A549 Cells ; Animals ; Apocynaceae ; chemistry ; Cardiac Glycosides ; chemistry ; isolation & purification ; pharmacology ; toxicity ; Cell Line, Tumor ; Cell Survival ; drug effects ; Chromatography, High Pressure Liquid ; Computational Biology ; Data Mining ; Drugs, Chinese Herbal ; chemistry ; pharmacology ; Humans ; Inhibitory Concentration 50 ; MCF-7 Cells ; Mice ; Molecular Structure ; Plant Roots ; chemistry ; Plants, Medicinal ; chemistry ; Tandem Mass Spectrometry ; Workflow