Bacillus subtilis is recognized as a generally-regarded-as-safe strain, and has been widely used in the biosynthesis of high value-added products, including N-acetylneuraminic acid (NeuAc) which is widely used as a nutraceutical and a pharmaceutical intermediate. Biosensors responding to target products are widely used in dynamic regulation and high-throughput screening in metabolic engineering to improve the efficiency of biosynthesis. However, B. subtilis lacks biosensors that can efficiently respond to NeuAc. This study first tested and optimized the transport capacity of NeuAc transporters, and obtained a series of strains with different transport capacities for testing NeuAc-responsive biosensors. Subsequently, the binding site sequence of Bbr_NanR responding to NeuAc was inserted into different sites of the constitutive promoter of B. subtilis, and active hybrid promoters were obtained. Next, by introducing and optimizing the expression of Bbr_NanR in B. subtilis with NeuAc transport capacity, we obtained an NeuAc-responsive biosensor with wide dynamic range and higher activation fold. Among them, P535-N2 can sensitively respond to changes in intracellular NeuAc concentration, with the largest dynamic range (180-20 245) AU/OD. P566-N2 shows a 122-fold of activation, which is 2 times of the reported NeuAc-responsive biosensor in B. subtilis. The NeuAc-responsive biosensor developed in this study can be used to screen enzyme mutants and B. subtilis strains with high NeuAc production efficiency, providing an efficient and sensitive analysis and regulation tool for biosynthesis of NeuAc in B. subtilis.
N-Acetylneuraminic Acid/metabolism* ; Bacillus subtilis/metabolism* ; Promoter Regions, Genetic/genetics* ; Binding Sites ; Biosensing Techniques

OBJECTIVE: To delineate the origin and content of a mosaicism small supernumerary marker chromosome (sSMC) in a fetus with combined chromosomal karyotyping, chromosomal microarray analysis (CMA) and fluorescence in situ hybridization (FISH). METHODS: The fetus of a 31-year-old pregnant woman who had presented at the Maternal and Child Health Care Hospital of Longhua District of Shenzhen City in 2022 was selected as the study subject. Non-invasive prenatal testing suggested that the fetus has harbored a 8.75 Mb duplication in 4q12q13.1. With informed consent, amniotic fluid and peripheral blood samples were taken from the couple for chromosomal karyotyping analysis. The origin and content of a sSMC was identified by CMA, and its proportion in amniotic fluid was determined with a FISH assay. RESULTS: The karyotypes of the pregnant woman, her husband and the fetus were respectively determined as 46,XX, 46,XY,inv(9)(p12q12), and 47,XY,inv(9)(p12q12)pat,+mar[75]/ 46,XY,inv(9)(p12q12)pat[25]. CMA test of the amniotic fluid sample was arr[hg19]4p11q13.1(48978053_63145931)×3, which revealed no mosaicism. However, FISH analysis showed that 59% of interphase cells from the cultured amniotic fluid sample had contained three signals for the centromere of chromosome 4, whilst 65% of interphase cells from the re-sampled amniotic fluid had three such signals, which confirmed the existence of trisomy 8 mosaicism. CONCLUSION Chromosomal structural abnormality combined with mosaicism can be delineated with combined chromosomal karyotyping and molecular techniques such as FISH and CMA, which has enabled more accurate counseling for the family.
Humans ; Child ; Female ; Pregnancy ; Adult ; In Situ Hybridization, Fluorescence ; Mosaicism ; Genetic Techniques ; Amniotic Fluid ; Chromosomes, Human, Pair 4

With various diseases ravaging internationally, the demands for recombinant adenoviral vector (Adv) vaccines have increased dramatically. To meet the demand for Adv vaccine, development of a new cell culture process is an effective strategy. Applying hyperosmotic stress in cells before virus infection could increase the yield of Adv in batch culture mode. Emerging perfusion culture can significantly increase the yield of Adv as well. Therefore, combining the hyperosmotic stress process with perfusion culture is expected to improve the yield of Adv at high cell density. In this study, a shake flask combined with a semi-perfusion culture was used as a scaled-down model for bioreactor perfusion culture. Media with osmotic pressure ranging from 300 to 405 mOsm were used to study the effect of hyperosmotic stress on cell growth and Adv production. The results showed that using a perfusion culture process with a hyperosmotic pressure medium (370 mOsm) during the cell growth phase and an isosmotic pressure medium (300 mOsm) during the virus production phase effectively increased the yield of Adv. This might be due to the increased expression of HSP70 protein during the late phases of virus replication. The Adv titer in a bioreactor with such a process reached 3.2×10¹⁰ IFU/mL, three times higher than that of the traditional perfusion culture process. More importantly, this is the first time that a strategy of combining the hyperosmotic stress process with perfusion culture is applied to the production of Adv in HEK 293 cells. It also reveals the reason why the hyperosmotic stress process increased the yield of Adv, which may facilitate the process optimization of for producing other Adv in HEK 293 cells.
Humans ; HEK293 Cells ; Genetic Vectors/genetics* ; Batch Cell Culture Techniques ; Bioreactors ; Perfusion

Nowadays, engineered Komagataella phaffii plays an important role in the biosynthesis of small molecule metabolites and protein products, showing great potential and value in industrial productions. With the development and application of new editing tools such as CRISPR/Cas9, it has become possible to engineer K. phaffii into a cell factory with high polygenic efficiency. Here, the genetic manipulation techniques and objectives for engineering K. phaffii are first summarized. Secondly, the applications of engineered K. phaffii as a cell factory are introduced. Meanwhile, the advantages as well as disadvantages of using engineered K. phaffii as a cell factory are discussed and future engineering directions are prospected. This review aims to provide a reference for further engineering K. phaffii cell factory, which is supposed to facilitate its application in bioindustry.
Saccharomycetales/genetics* ; Genetic Techniques

Plasmids are the most commonly used gene carriers in the field of gene synthesis and sequencing. However, the main problems faced by traditional plasmid DNA extraction technology are low extraction throughput and high production cost, so they cannot meet the growing demand. In this study, a double-magnetic-bead method (DMBM) for plasmid extraction was developed based on the principle of plasmid extraction. The effects of the input of magnetic beads, the size of plasmid DNA fragments, and the volume of bacterial on plasmid DNA extraction were explored. In addition, the quality, throughput, and cost of plasmid DNA extraction were also compared between this technique and the commercial plasmid DNA extraction kits. The results showed that the DMBM can meet the needs of extracting plasmid DNA with different cell densities and fragment lengths. Moreover, the sensitivity and quality of plasmid extraction by the DMBM method were both superior to those of the centrifugal adsorption column method. In addition, this technique could be applied on a 96-channel automated nucleic acid extractor, resulting in higher purity of the extracted plasmid DNA, 80% reduction in extraction time, and 57.1% reduction in cost. It also reduces manual operations, achieving high-throughput and low-cost plasmid DNA extraction, thus may facilitate gene synthesis and sequencing.
Plasmids/genetics* ; DNA/genetics* ; Nucleic Acids ; Genetic Techniques ; Magnetic Phenomena

Humans ; Child ; Communicable Diseases/therapy* ; Molecular Diagnostic Techniques ; Genetic Testing

Acarbose is widely used as α-glucosidase inhibitor in the treatment of type Ⅱ diabetes. Actinoplanes sp. is used for industrial production of acarbose. As a secondary metabolite, the biosynthesis of acarbose is quite complex. In addition to acarbose, a few acarbose structural analogs are also accumulated in the culture broth of Actinoplanes sp., which are hard to remove. Due to lack of systemic understanding of the biosynthesis and regulation mechanisms of acarbose and its structural analogs, it is difficult to eliminate or reduce the biosynthesis of the structural analogs. Recently, the advances in omics technologies and molecular biology have facilitated the investigations of biosynthesis and regulatory mechanisms of acarbose and its structural analogs in Actinoplanes sp.. The genes involved in the biosynthesis of acarbose and its structural analogs and their regulatory mechanism have been extensively explored by using bioinformatics analysis, genetic manipulation and enzymatic characterization, which is summarized in this review.
Acarbose/metabolism* ; Diabetes Mellitus, Type 2/drug therapy* ; Genetic Techniques ; Humans

Gene expression labeling and conditional manipulation of gene function are important for elaborate dissection of gene function. However, contemporary generation of pairwise dual-function knockin alleles to achieve both conditional and geno-tagging effects with a single donor has not been reported. Here we first developed a strategy based on a flipping donor named FoRe to generate conditional knockout alleles coupled with fluorescent allele-labeling through NHEJ-mediated unidirectional targeted insertion in zebrafish facilitated by the CRISPR/Cas system. We demonstrated the feasibility of this strategy at sox10 and isl1 loci, and successfully achieved Cre-induced conditional knockout of target gene function and simultaneous switch of the fluorescent reporter, allowing generation of genetic mosaics for lineage tracing. We then improved the donor design enabling efficient one-step bidirectional knockin to generate paired positive and negative conditional alleles, both tagged with two different fluorescent reporters. By introducing Cre recombinase, these alleles could be used to achieve both conditional knockout and conditional gene restoration in parallel; furthermore, differential fluorescent labeling of the positive and negative alleles enables simple, early and efficient real-time discrimination of individual live embryos bearing different genotypes prior to the emergence of morphologically visible phenotypes. We named our improved donor as Bi-FoRe and demonstrated its feasibility at the sox10 locus. Furthermore, we eliminated the undesirable bacterial backbone in the donor using minicircle DNA technology. Our system could easily be expanded for other applications or to other organisms, and coupling fluorescent labeling of gene expression and conditional manipulation of gene function will provide unique opportunities to fully reveal the power of emerging single-cell sequencing technologies.
Alleles ; Animals ; CRISPR-Cas Systems ; DNA End-Joining Repair ; DNA, Circular/metabolism* ; Embryo, Nonmammalian ; Gene Editing/methods* ; Gene Knock-In Techniques ; Gene Knockout Techniques ; Genes, Reporter ; Genetic Loci ; Genotyping Techniques ; Green Fluorescent Proteins/metabolism* ; Integrases/metabolism* ; Luminescent Proteins/metabolism* ; Mutagenesis, Insertional ; Single-Cell Analysis ; Zebrafish/metabolism*

By inserting microRNAs into the intron of EF1α promoter, we constructed a novel lentiviral vector knocking down PD-1 gene via microRNA and applied it to CAR-T cells. Lentiviral transduction efficiency and PD-1-silencing efficiency were detected by flow cytometry. PD-1 expression was detected by Western blotting. Relative expression of microRNA was measured by Q-PCR. Cytotoxicity of CAR-T cells based on this vector was tested by luciferase bioluminescence and flow cytometry. Compared with lentiviral vector with microRNA transcribed by U6 promotor, the transduction efficiency of lentiviral vector with microRNA which was inserted into the intron of EF1α promoter was more significant, and the knockdown rate of PD-1 was more than 90%, which was validated by flow cytometry and Western blotting. And the relative expression level of microRNA in Jurkat cells transduced with this novel lentiviral vector was shown by Q-PCR. Compared with normal CAR-T cells, CAR-T cells based on this vector showed stronger cytotoxicity against PD-L1 positive Raji cells. We successfully constructed a novel lentiviral vector that knocked down PD-1 via microRNA and verified the superiority of its transduction efficiency and knockdown efficiency of PD-1. CAR-T cells based on this vector can exert a more powerful cytotoxicity, thus providing theoretical support for the subsequent treatment of PD-L1 positive tumors.
Cell Line, Tumor ; Gene Knockdown Techniques ; Genetic Vectors ; genetics ; Humans ; Lentivirus ; genetics ; MicroRNAs ; metabolism ; Programmed Cell Death 1 Receptor ; Promoter Regions, Genetic ; genetics

Overlap extension PCR is a common method for site-directed mutagenesis. As objective gene sequence growing longer, it is often difficult to obtain the target product in the second round of PCR, and it is highly possible to introduce unexpected mutations into a long gene fragment by PCR. To circumvent these problems, we can only amplify a small gene fragment which contain the target mutation by overlap extension PCR, and then ligate it with vector to get target plasmid. If the restriction site at the end of the amplified fragment was not a single one on plasmid vector, double fragments ligation method could be used to construct target plasmid. Partial amplification, combined with double fragments ligation, could solve lots of problems in long gene mutagenesis. Taking retinoblastoma gene 1 S780E mutagenesis as an example, it is difficult to amplify whole retinoblastoma gene 1 by overlap extension PCR because of long fragment interfering the overlapping extension of second round PCR. However, it is relatively easy to amplify the F3 (1 968-2 787) fragment which contains target mutation S780E. There is a Nhe I site which can be used for ligation on 5' end of F3 fragment, but another Nhe I site on the plasmid restrained from doing so directly. In order to circumvent this obstacle, we ligated F3 fragment, combining with F2 (900-1 968) fragment which was digested from wild type plasmid, with the vector which contain F1 (1-900) fragment of the gene. That double fragments ligated with one vector at the same time, though less efficient, can recombine into a complete plasmid. The sequences of the two selected recombinant plasmids were consistent with the target mutation, which verified the feasibility of this scheme. As an improvement of overlap extension PCR, partial amplification and double fragments ligation methods could provide solutions for site directed mutagenesis of many long genes.
Base Sequence ; Cloning, Molecular ; Genetic Vectors ; genetics ; Mutagenesis, Site-Directed ; methods ; Nucleic Acid Amplification Techniques ; Plasmids ; Polymerase Chain Reaction