Stress distribution of three NiTi rotary files under bending and torsional conditions using 3-dimensional finite element analysis.
10.5395/JKACD.2008.33.4.323
- Author:
Tae Oh KIM
1
;
Chan Joo LEE
;
Byung Min KIM
;
Jeong Kil PARK
;
Bock HUR
;
Hyeon Cheol KIM
Author Information
1. Department of Conservative Dentistry, School of Dentistry, Pusan National University, Busan, Korea. golddent@pusan.ac.kr
- Publication Type:Original Article
- Keywords:
Stress;
NiTi rotary instrument;
Cross-section;
Bending;
Torsion;
Finite element analysis
- MeSH:
Collodion;
Finite Element Analysis;
Pliability;
Torque
- From:Journal of Korean Academy of Conservative Dentistry
2008;33(4):323-331
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
Flexibility and fracture properties determine the performance of NiTi rotary instruments. The purpose of this study was to evaluate how geometrical differences between three NiTi instruments affect the deformation and stress distributions under bending and torsional conditions using finite element analysis. Three NiTi files (ProFile .06 / #30, F3 of ProTaper and ProTaper Universal) were scanned using a Micro-CT. The obtained structural geometries were meshed with linear, eight-noded hexahedral elements. The mechanical behavior (deformation and von Mises equivalent stress) of the three endodontic instruments were analyzed under four bending and rotational conditions using ABAQUS finite element analysis software. The nonlinear mechanical behavior of the NiTi was taken into account. The U-shaped cross sectional geometry of ProFile showed the highest flexibility of the three file models. The ProTaper, which has a convex triangular cross-section, was the most stiff file model. For the same deflection, the ProTaper required more force to reach the same deflection as the other models, and needed more torque than other models for the same amount of rotation. The highest von Mises stress value was found at the groove area in the cross-section of the ProTaper Universal. Under torsion, all files showed highest stresses at their groove area. The ProFile showed highest von Mises stress value under the same torsional moment while the ProTaper Universal showed the highest value under same rotational angle.
