Design of longitudinal auto-tracking of the detector on X-ray in digital radiography.
10.7507/1001-5515.201701042
- Author:
Xiaomin YU
1
,
2
;
Tianhao JIANG
3
;
Zhihong LIU
3
;
Xu ZHAO
3
Author Information
1. Key Laboratory of Biological Effect of Physical Field and Instrument, School of Electrical and Electronic Engineering, Chengdu University of Information Technology, Chengdu 610225, P.R.China.jonahyxm@
2. com.
3. Key Laboratory of Biological Effect of Physical Field and Instrument, School of Electrical and Electronic Engineering, Chengdu University of Information Technology, Chengdu 610225, P.R.China.
- Publication Type:Journal Article
- Keywords:
auto-tracking;
digital radiography system;
eccentric distance;
manual collimator
- From:
Journal of Biomedical Engineering
2018;35(2):297-300
- CountryChina
- Language:Chinese
-
Abstract:
One algorithm is designed to implement longitudinal auto-tracking of the the detector on X-ray in the digital radiography system (DR) with manual collimator. In this study, when the longitudinal length of field of view (LFOV) on the detector is coincided with the longitudinal effective imaging size of the detector, the collimator half open angle ( ), the maximum centric distance ( ) between the center of X-ray field of view and the projection center of the focal spot, and the detector moving distance for auto-traking can be calculated automatically. When LFOV is smaller than the longitudinal effective imaging size of the detector by reducing , the can still be used to calculate the detector moving distance. Using this auto-tracking algorithm in DR with manual collimator, the tested results show that the X-ray projection is totally covered by the effective imaging area of the detector, although the center of the field of view is not aligned with the center of the effective imaging area of the detector. As a simple and low-cost design, the algorithm can be used for longitudinal auto-tracking of the detector on X-ray in the manual collimator DR.
