OBJECTIVE: To investigate the biocompatibility of porous WE43 magnesium alloy scaffolds manufactured by 3D printing technology and to observe its effect in treating femoral defects in New Zealand white rabbits. METHODS: In vitro cytotoxicity test was performed using bone marrow mesenchymal stem cells from Sprague Dawley (S-D) rats. According to the different culture media, the cells were divided into 100% extract group, 50% extract group, 10% extract group and control group. After culturing for 1, 3 and 7 days, the cell activity of each group was determined by cell counting kit-8 (CCK-8). In the in vivo experiment, 3.0-3.5 kg New Zealand white rabbits were randomly divided into three groups: Experimental group, bone cement group and blank group, with 9 rabbits in each group. Each rabbit underwent surgery on the left lateral femoral condyle, and a bone defect with a diameter of 5 mm and a depth of 6 mm was created using a bone drill. The experimental group was implanted with WE43 magnesium alloy scaffolds, the bone cement group was implanted with calcium sulfate bone cement, and the blank group was not implanted. Then 4, 8 and 12 weeks after surgery, 3 rabbits in each group were euthanized by carbon dioxide anesthesia, and the femur and important internal organs were sampled. Micro-computed tomography (Micro-CT) scanning was performed on the left lateral femoral condyle. Sections of important internal organs were prepared and stained with hematoxylin-eosin (HE). Hard tissue sections were made from the left lateral femoral condyle and stained with methylene blue acid fuchsin and observed under a microscope. RESULTS: In the cytotoxicity test, the cell survival rate in the 100% extract group was higher than that in the control group (140.56% vs. 100.00%, P < 0.05) on 1 day of culture; there was no statistically significant difference (P>0.05) in cell survival rate among the groups on 3 days of culture; the cell survival rate in the 100% extract group was lower than that in the control group (68.64% vs. 100.00%, P < 0.05) on 7 days of culture. Micro-CT scanning in the in vivo experiment found that most of the scaffolds in the experimental group had been degraded in 4 weeks, with very few high-density scaffolds remaining. In 12 weeks, there was no obvious stent outline. In 4 weeks, a certain amount of gas was generated around the WE43 magnesium alloy scaffold, and the gas was significantly reduced from 8 to 12 weeks. Hard tissue sections showed that a certain amount of extracellular matrix and osteoid were generated around the scaffolds in the experimental group in 4 weeks. In the bone cement group, most of the calcium sulfate bone cement had been degraded. In 8 weeks, the osteoid around the scaffold and its degradation products in the experimental group increased significantly. In 12 weeks, new bone was in contact with the scaffold around the scaffold in the experimental group. There was less new bone in the bone cement group and the blank group. CONCLUSION The porous WE43 magnesium alloy scaffold fabricated by 3D printing process has good biocompatibility and good osteogenic properties, and has the potential to become a new material for repairing bone defects.
Animals ; Rabbits ; Printing, Three-Dimensional ; Alloys/chemistry* ; Tissue Scaffolds/chemistry* ; Magnesium/chemistry* ; Rats, Sprague-Dawley ; Biocompatible Materials ; Mesenchymal Stem Cells/cytology* ; Femur/surgery* ; Rats ; Absorbable Implants ; Male ; Bone Regeneration ; Tissue Engineering/methods* ; Cells, Cultured

OBJECTIVE: To investigate the current status of kinesiophobia after lumbar fusion surgery in patients with lumbar disc herniation (LDH) and to analyze its influencing factors. METHODS: A total of 489 LDH patients who underwent lumbar fusion surgery in our hospital from January 2021 to December 2022 and effectively filled out the tampa scale for kinesiophobia (TSK) and other questionnaires on the first day after surgery were collected as the study subjects, the current status of kinesiophobia in LDH patients after lumbar fusion surgery were investigated using the TSK. The LDH patients were grouped into a kinesiophobia group (n=221) and a non kinesiophobia group (n=268) based on whether there was kinesiophobia after lumbar fusion surgery. The self-designed general data questionnaires were used to collect data, and Logistic regression was applied to analyze independent risk factors for kinesiophobia after lumbar fusion surgery in the LDH patients. RESULTS: In the study, 221 out of the 489 LDH patients (45.19%) had kinesiophobia after lumbar fusion surgery. Univariate analysis showed that there were statistically significant differences between the phobic group and the non phobic group in terms of gender, education level, course of disease, whether there was hypoproteinemia, pain level, self-efficacy, social support, whether there was anxiety, and whether there was depression (P < 0.05). There were no statistically significant differences in terms of age, body mass index, monthly family income, marital status, residence, medical expense payment form, whether there was hypertension, whether there was diabetes, whether there was cardiovascular and cerebrovascular disease, whether there was respiratory disease, whether there was surgery experience, whether there was anemia, work conditions, and responsibility segments (P>0.05). Male (95%CI: 3.289-10.586, P < 0.001), education level below undergraduate level (95%CI: 6.533-45.162, P < 0.001), severe pain (95%CI: 10.348-72.025, P < 0.001), moderate pain (95%CI: 6.247-37.787, P < 0.001), low self-efficacy (95%CI: 4.238-15.095, P < 0.001), and medium self-efficacy (95%CI: 2.804-8.643, P < 0.001) were influencing factors for kinesiophobia after lumbar fusion surgery in the patients with LDH (P < 0.05). CONCLUSION The incidence of kinesiophobia after lumbar fusion surgery in patients with LDH is high, and its influencing factors include gender, education level, pain level, and self-efficacy.
Humans ; Spinal Fusion/psychology* ; Intervertebral Disc Displacement/psychology* ; Lumbar Vertebrae/surgery* ; Male ; Female ; Middle Aged ; Phobic Disorders/etiology* ; Surveys and Questionnaires ; Adult ; Risk Factors ; Aged ; Fear ; Kinesiophobia

OBJECTIVE: To assess the osteogenesis height in maxillary sinus segment one year after zygomatic implantation by imaging methods, and evaluate the influence of patient factors, maxillary sinus anatomical factors and surgical factors on postoperative osteogenesis height. METHODS: This study is a retrospective study, including patients who underwent zygomatic implantation and whose zygomatic implants passed through the maxillary sinus at the Department of Implantology, Peking University School and Hospital of Stomatology from July 2017 to January 2022. Preoperative and postoperative cone beam CT (CBCT)was taken to measure and calculate the average osteogenesis height (AOH) in maxillary sinus segment of the zygomatic implants, then the residual bone height, the width and morphology of the maxillary sinus floor in the buccal and palatal directions were measured. Besides, the integrity of Schneiderian membrane during implant surgery, and the general information of the patients and zygomatic implants were recorded. By comparing anatomical situations and surgical characteristics, the differences of AOH under different conditions were analyzed. Then AOH was divided into two groups (obvious osteogenesis group and non-obvious osteogenesis group) using the median as the threshold, and the influencing factors of osteogenesis were evaluated using mixed effect generalized linear model univariable and multivariable analysis. RESULTS: A total of 47 zygomatic implants were implanted in 24 patients. During the average follow-up period of 12.1 months, there was no implant failure, and the implant survival rate was 100%. Postoperative CBCT showed that 43 zygomatic implants had osteogenic images in the maxillary sinus segment, most of which originated from the floor of the maxillary sinus, and the median AOH was 3.1 mm [interquartile range (IQR): 4.0 mm]. In terms of maxillary sinus width, there were 31 cases (66.0%) of wide type and 16 cases (34.0%) of narrow type. In the aspect of buccal and palatal morphology, 17 cases were taper (36.2%), 20 cases were round (42.6%), and 10 cases were flat (21.3%). The median of residual bone height was 2.8 mm (IQR: 2.2 mm) before operation. Univa-riate analysis of mixed effect generalized linear model showed that postoperative obvious osteogenic rate was related to the residual bone height (OR=2.09, P=0.006). Multivariate analysis showed that the resi-dual bone height (OR=2.55, P=0.022) and the shape of a taper maxillary sinus (OR=11.44, P=0.040) had a significant impact on the postoperative obvious osteogenic rate. CONCLUSION The maxillary sinus floor showed osteogenic images 1 year after the zygomatic implantation surgery. Larger residual bone height and the shape of a taper maxillary sinus may be favorable factors for osteogenesis.
Humans ; Maxillary Sinus/surgery* ; Cone-Beam Computed Tomography ; Retrospective Studies ; Zygoma/diagnostic imaging* ; Male ; Female ; Osteogenesis/physiology* ; Middle Aged ; Adult ; Dental Implants ; Aged ; Dental Implantation, Endosseous/methods*

INTRODUCTION: The aim of this study was to elucidate the epidemiology and distribution of hand fractures in Singapore. METHODS: A total of 701 hand fractures in 596 patients aged 21 years and above from a single centre were reviewed from 2010 to 2011. Details regarding the patient demographics, occupation, mechanism of injury, associated injuries and treatment were obtained. RESULTS: Hand fractures were particularly significant in patients between the ages of 21 and 40 years 58.9% of the total cases. The relative risk of hand fractures in males was 5.5 times greater than that in females. The majority of hand fractures occurred at the workplace (47.7%), with crush injury being the main mechanism of injury (33.6%). The most common locations of hand fracture were the little finger ray (31.2%) and distal phalanges (37.7%). There were 170 cases that underwent surgical fixation, which accounted for 24.3% of all fractures. Fixation rate was similar for both closed and open fractures but was significantly higher in the proximal and middle phalanges compared to the distal phalanx and metacarpal ( P < 0.001). With regards to surgical fixation methods, wires were commonly used in either tuft fractures (100.0%) or intra-articular fractures (69.9%), whereas plates and screws were commonly used in shaft fractures (65.5%). CONCLUSION The most significant population that sustained hand fractures in Singapore are young to middle-aged males who are skilled manual workers. The most commonly involved ray and location of hand fractures are the little finger ray and the distal phalanges, respectively, as they are in a relatively more exposed location.
Humans ; Singapore/epidemiology* ; Male ; Female ; Adult ; Middle Aged ; Fractures, Bone/surgery* ; Hand Injuries/surgery* ; Young Adult ; Aged ; Hand Bones/injuries* ; Retrospective Studies ; Fracture Fixation, Internal

INTRODUCTION: Radiology plays an integral role in fracture detection in the emergency department (ED). After hours, when there are fewer reporting radiologists, most radiographs are interpreted by ED physicians. A minority of these interpretations may miss diagnoses, which later require the callback of patients for further management. Artificial intelligence (AI) has been viewed as a potential solution to augment the shortage of radiologists after hours. We explored the efficacy of an AI solution in the detection of appendicular and pelvic fractures for adult radiographs performed after hours at a general hospital ED in Singapore, and estimated the potential monetary and non-monetary benefits. METHODS: One hundred and fifty anonymised abnormal radiographs were retrospectively collected and fed through an AI fracture detection solution. The radiographs were re-read by two radiologist reviewers and their consensus was established as the reference standard. Cases were stratified based on the concordance between the AI solution and the reviewers' findings. Discordant cases were further analysed based on the nature of the discrepancy into overcall and undercall subgroups. Statistical analysis was performed to evaluate the accuracy, sensitivity and inter-rater reliability of the AI solution. RESULTS: Ninety-two examinations were included in the final study radiograph set. The AI solution had a sensitivity of 98.9%, an accuracy of 85.9% and an almost perfect agreement with the reference standard. CONCLUSION An AI fracture detection solution has similar sensitivity to human radiologists in the detection of fractures on ED appendicular and pelvic radiographs. Its implementation offers significant potential measurable cost, manpower and time savings.
Humans ; Singapore ; Emergency Service, Hospital ; Fractures, Bone/diagnostic imaging* ; Artificial Intelligence ; Retrospective Studies ; Adult ; Male ; Female ; Cost Savings ; Middle Aged ; Pelvic Bones/diagnostic imaging* ; Reproducibility of Results ; Aged ; Sensitivity and Specificity ; Radiography

OBJECTIVE: To compare the clinical efficacy of acupuncture with yin-yang regulation method versus local acupuncture in treating chronic low back pain (CLBP) in elderly patients with lumbar disc herniation (LDH), and to evaluate the changes in the multifidus muscle before and after treatment using musculoskeletal ultrasound. METHODS: A total of 128 elderly patients with CLBP due to LDH were randomly assigned to an observation group (64 cases, 2 cases dropped out) and a control group (64 cases, 2 cases dropped out). The control group received local acupuncture at bilateral L₃-L₅ Jiaji points (EX-B2), Shenshu (BL23), Dachangshu (BL25), Weizhong (BL40), Yaoyangguan (GV3), and ashi points. The observation group received acupuncture with yin-yang regulation method, which included an abdominal protocol with Baihui (GV20), Zhongwan (CV12), Qihai (CV6), Guanyuan (CV4), bilateral Tianshu (ST25), and Dahe (KI12), etc., and a lumbar protocol with Baihui (GV20), Dazhui (GV14), Jizhong (GV6), Yaoyangguan (GV3), and ashi points, etc., alternated bilaterally. Both groups were treated once every other day, three times per week, for a total of 12 sessions. The visual analogue scale (VAS) score, Oswestry disability index (ODI) score, and the indexs of musculoskeletal ultrasound multifidus muscle (resting and functional thickness and Young's modulus values) were observed before and after treatment, and the clinical efficacy was evaluated in the two groups. RESULTS: After 1 and 4 weeks of treatment, both groups showed lower VAS scores compared to baseline (P<0.05), the VAS scores in the observation group were lower than those in the control group (P<0.001). ODI scores in both groups were decreased after 1 and 4 weeks of treatment compared to baseline (P<0.05), with a further reduction at 4 weeks of treatment compared to 1 week of treatment (P<0.05); the observation group showed lower ODI score than the control group after 1 week of treatment (P<0.001). After treatment, both groups demonstrated increased resting and functional multifidus muscle thickness bilaterally compared to baseline (P<0.01), with an increased right-side thickness change rate (P<0.01), though no significant difference was observed between groups (P>0.05). Compared to baseline, after treatment, the observation group exhibited decreased Young's modulus values for bilateral resting and functional multifidus muscle (P<0.01), while the control group showed reductions only in bilateral resting and right-side functional Young's modulus values (P<0.01). After treatment, the bilateral functional Young's modulus values in the observation group were lower than that in the control group (P<0.05), and the bilateral resting and functional changes in Young's modulus values were greater in the observation group than those in the control group (P<0.01). The overall effective rate was 93.5% (58/62) in the observation group, which was higher than 79.0% (49/62) in the control group (P<0.05). CONCLUSION Acupuncture with yin-yang regulation method effectively alleviates pain, improves functional disability, increases multifidus muscle thickness, and reduces Young's modulus values in elderly patients with CLBP due to LDH, which has superior therapeutic effect compared to local acupuncture.
Humans ; Low Back Pain/physiopathology* ; Male ; Acupuncture Therapy ; Female ; Aged ; Intervertebral Disc Displacement/physiopathology* ; Middle Aged ; Yin-Yang ; Lumbar Vertebrae ; Acupuncture Points ; Treatment Outcome

OBJECTIVE: To explore the relationship between the effect of acupuncture and layered localization of computed tomography (CT) in treatment of lumbar disc herniation. METHODS: Based on the CT layered localization, the herniated lumbar discs were positioned in 5 layers, A, B, C, D and E among 300 patients with lumbar disc herniation. Combined with the horizontal and the frontal planes, the three-dimensional location was formed. Acupuncture was delivered at acupoints including bilateral Shenshu (BL23), Dachangshu (BL25), and Huantiao (GB30), Weizhong (BL40) on the affected side. One intervention of acupuncture was 30 min, once daily; 1 course of treatment was composed of 10 interventions and 2 courses were required. Before and after treatment, Japanese orthopaedic association (JOA) score was recorded, and the effect was evaluated. The curative effect was classified and compared with the CT layered localization. RESULTS: Of 300 patients, 226 cases were effective and the effective rate was 75.33%. The JOA scores of all patients, and in the effective group and the non-effective group were higher compared with the scores before treatment (P<0.05). With the layered localization considered, acupuncture was more effective on the cases positioned in C layer. Regarding the horizontal plane, the effect was better on the cases with zone 1 and zone 1-2 involved. In terms of the grade of frontal plane, acupuncture was more effective on the cases graded Ⅰ and Ⅱ. CONCLUSION The clinical effect of acupuncture on lumbar disc herniation is related with the layer and the horizontal zone of herniated disc positioned, as well as to the grade of the frontal plane.
Humans ; Acupuncture Therapy ; Intervertebral Disc Displacement/diagnostic imaging* ; Male ; Female ; Middle Aged ; Adult ; Tomography, X-Ray Computed ; Lumbar Vertebrae/diagnostic imaging* ; Acupuncture Points ; Aged ; Young Adult ; Treatment Outcome

This paper introduces Professor LIU Zhibin 's clinical experience in the treatment of subjective tinnitus with acupuncture based on the "kidney-bone-brain" axis. Professor LIU proposes that the disease is most closely related to the kidney and brain. The lesion is located in the brain, and the pathogenesis is kidney essence deficiency, marrow sea loss, and ear orifice dystrophy. The "kidney-bone-brain" shows close correlation in physiological function, pathological changes and treatment. According to the "kidney-bone-brain" axis, Professor LIU proposes that the treatment of subjective tinnitus should be tonifying kidney qi, tonifying essence and filling marrow, and the principle of local acupoint selection, touching bone acupuncture, matching distal acupoints and proximal acupoints, tonifying kidney and benefiting brain should be adopted. The acupoints of Tinggong (SI19) and Yifeng (TE17) are selected to be treated with touching bone acupuncture, combined with Taixi (KI3), Shenshu (BL23), Baihui (GV20) and Shenting (GV24), so as to achieve common benefit of kidney, bone and brain, and multi-angle treatment.
Humans ; Acupuncture Therapy/history* ; Tinnitus/physiopathology* ; Acupuncture Points ; Kidney/physiopathology* ; Brain/physiopathology* ; Bone and Bones/physiopathology* ; Female ; Male ; Adult ; Middle Aged

The development of bone in human body and the maintenance of bone mass in adulthood are regulated by a variety of biological factors. Myocyte enhancer factor 2C (MEF2C), as one of the many factors regulating bone tissue development and balance, has been shown to play a key role in bone development and metabolism. However, there is limited systematic analysis on the effects of MEF2C on bone tissue. This article reviews the role of MEF2C in bone development and metabolism. During bone development, MEF2C promotes the development of neural crest cells (NC) into craniofacial cartilage and directly promotes cartilage hypertrophy. In terms of bone metabolism, MEF2C exhibits a differentiated regulatory model across different types of osteocytes, demonstrating both promoting and other potential regulatory effects on bone formation, with its stimulating effect on osteoclasts being determined. In view of the complex roles of MEF2C in bone tissue, this paper also discusses its effects on some bone diseases, providing valuable insights for the physiological study of bone tissue and strategies for the prevention of bone diseases.
Humans ; MEF2 Transcription Factors/physiology* ; Bone and Bones/metabolism* ; Animals ; Bone Development/physiology* ; Osteogenesis/physiology* ; Myogenic Regulatory Factors/physiology*

Tripartite motif-containing (TRIM) family proteins are crucial E3 ubiquitin ligases that have garnered significant attention for their regulatory roles in bone metabolism in recent years. This article reviews the function and regulatory mechanisms of TRIM family proteins in bone metabolism, focusing on their dual roles in bone formation and resorption. It also provides a detailed analysis of signaling pathways and molecular mechanisms by which TRIM family members regulate the activities of osteoblasts and osteoclasts. Research findings suggest that modulating the expression or activity of TRIM family proteins could be beneficial for treating bone diseases such as osteoporosis. This review highlights the molecular mechanisms of TRIM family members in bone physiology and pathology, aiming to provide theoretical basis and scientific guidance for developing novel therapeutic strategies for bone diseases.
Humans ; Ubiquitin-Protein Ligases/physiology* ; Bone and Bones/metabolism* ; Animals ; Tripartite Motif Proteins/physiology* ; Osteoclasts/metabolism* ; Osteoblasts/metabolism* ; Signal Transduction/physiology* ; Osteogenesis/physiology*