ObjectiveTo observe the clinical efficacy and safety of Zhuyuwan in the treatment of hyperlipidemia. MethodsIn this study， hyperlipidemia patients treated in the Hospital of Chengdu University of Traditional Chinese Medicine （TCM） from September 2022 to December 2023 were randomly assigned into a control group and an observation group. Finally， 162 valid cases were included， encompassing 74 cases in the control group and 88 cases in the observation group. The control group was treated with atorvastatin calcium tablets， and the observation group with atorvastatin calcium tablets + Zhuyuwan extract granules. Both groups were treated for 8 weeks. The efficacy in terms of blood lipid level recovery， blood lipid levels， TCM syndrome distribution， efficacy in terms of TCM syndrome， and TCM symptom scores were compared between the two groups as well as between before and after treatment. Liver and kidney functions were monitored for safety assessment. ResultsIn terms of blood lipid level recovery， the total response rate in the observation group was 86.36% （76/88） and that in the control group was 86.49% （64/74）， with no statistically significant difference between the two groups. After treatment， both groups showed declines in levels of triglyceride （TG）， total cholesterol （TC）， and low-density lipoprotein cholesterol （LDL-C） （P<0.05） and elevations in the level of high-density lipoprotein cholesterol （HDL-C） （P<0.05）. Moreover， the observation group outperformed the control group in recovering the levels of TG， LDL-C， and HDL-C （P<0.05， P<0.01）. In terms of TCM syndrome， hyperlipidemia was mostly caused by phlegm turbidity and obstruction. The total response rate in terms of TCM syndrome in the observation group was 87.30% （55/63）， which was higher than that （63.46%， 33/52） in the control group （χ²=9.102， P<0.01）. After treatment， the scores of total TCM symptoms， primary symptoms， and secondary symptoms decreased in both groups （P<0.05）， and the observation group had lower scores than the control group （P<0.01）. The observation group was superior to the control group in alleviating obesity， chest tightness， and low food intake （P<0.05）. In terms of safety， the level of aminotransferase was slightly elevated in the control group， and no obvious adverse reaction was observed in the observation group， with no statistical significance in the incidence of adverse reactions. ConclusionZhuyuwan combined with atorvastatin can not only recover blood lipid levels and alleviate TCM symptoms but also reduce the occurrence of adverse reactions.

ObjectiveTo observe the clinical efficacy and safety of Zhuyuwan in the treatment of hyperlipidemia. MethodsIn this study， hyperlipidemia patients treated in the Hospital of Chengdu University of Traditional Chinese Medicine （TCM） from September 2022 to December 2023 were randomly assigned into a control group and an observation group. Finally， 162 valid cases were included， encompassing 74 cases in the control group and 88 cases in the observation group. The control group was treated with atorvastatin calcium tablets， and the observation group with atorvastatin calcium tablets + Zhuyuwan extract granules. Both groups were treated for 8 weeks. The efficacy in terms of blood lipid level recovery， blood lipid levels， TCM syndrome distribution， efficacy in terms of TCM syndrome， and TCM symptom scores were compared between the two groups as well as between before and after treatment. Liver and kidney functions were monitored for safety assessment. ResultsIn terms of blood lipid level recovery， the total response rate in the observation group was 86.36% （76/88） and that in the control group was 86.49% （64/74）， with no statistically significant difference between the two groups. After treatment， both groups showed declines in levels of triglyceride （TG）， total cholesterol （TC）， and low-density lipoprotein cholesterol （LDL-C） （P<0.05） and elevations in the level of high-density lipoprotein cholesterol （HDL-C） （P<0.05）. Moreover， the observation group outperformed the control group in recovering the levels of TG， LDL-C， and HDL-C （P<0.05， P<0.01）. In terms of TCM syndrome， hyperlipidemia was mostly caused by phlegm turbidity and obstruction. The total response rate in terms of TCM syndrome in the observation group was 87.30% （55/63）， which was higher than that （63.46%， 33/52） in the control group （χ²=9.102， P<0.01）. After treatment， the scores of total TCM symptoms， primary symptoms， and secondary symptoms decreased in both groups （P<0.05）， and the observation group had lower scores than the control group （P<0.01）. The observation group was superior to the control group in alleviating obesity， chest tightness， and low food intake （P<0.05）. In terms of safety， the level of aminotransferase was slightly elevated in the control group， and no obvious adverse reaction was observed in the observation group， with no statistical significance in the incidence of adverse reactions. ConclusionZhuyuwan combined with atorvastatin can not only recover blood lipid levels and alleviate TCM symptoms but also reduce the occurrence of adverse reactions.

Enhanced recovery after surgery has reduced the number and duration of medical catheter placements through perioperative optimization measures. However, in clinical practice, catheters are still inevitably heavily used, and the risk of catheter-related infections persists. Preventing bacterial adhesion and biofilm formation on catheter surfaces is crucial. Medical antibacterial-coated catheters introduce substances that prevent fouling and adhesion, inhibit or kill bacteria on the surface, forming an antibacterial functional surface, providing a new strategy to address catheter-related infections. This article summarizes the current research status of medical antibacterial-coated catheters, introduces the antibacterial strategies and principles of the coatings, describes their actual effects in clinical applications, and analyzes future research directions. These studies help reduce catheter-related infections, promote innovation in clinical nursing technology, and improve the quality and efficiency of nursing care.

Enhanced recovery after surgery has reduced the number and duration of medical catheter placements through perioperative optimization measures. However, in clinical practice, catheters are still inevitably heavily used, and the risk of catheter-related infections persists. Preventing bacterial adhesion and biofilm formation on catheter surfaces is crucial. Medical antibacterial-coated catheters introduce substances that prevent fouling and adhesion, inhibit or kill bacteria on the surface, forming an antibacterial functional surface, providing a new strategy to address catheter-related infections. This article summarizes the current research status of medical antibacterial-coated catheters, introduces the antibacterial strategies and principles of the coatings, describes their actual effects in clinical applications, and analyzes future research directions. These studies help reduce catheter-related infections, promote innovation in clinical nursing technology, and improve the quality and efficiency of nursing care.

OBJECTIVETo investigate an ideal modeling method of designing 3D mesh scaffold substitutes based on tissue engineering to restore mandibular bone defects. By analyzing the theoretical model from titanium scaffolds fabricated by 3D printing, the feasibility and effectiveness of the proposed methodology were verified.

METHODSBased on the CT scanned data of a subject, the Mimics 15.0 and Geomagic studio 12.0 reverse engineering software were adopted to generate surface model of mandibular bone and the defect area was separated from the 3D model of bone. Then prosthesis was designed via mirror algorithm, in which outer shape was used as the external shape of scaffold. Unigraphics software NX 8.5 was applied on Boolean calculation of subtraction between prosthesis and regular microstructure structure and ANSYS 14.0 software was used to design the inner construction of 3D mesh scaffolds. The topological structure and the geometrical parameters of 3D mesh titanium scaffolds were adjusted according to the aim of optimized structure and maximal strength with minimal weight. The 3D mesh scaffolds solid model through two kinds of computer-aided methods was input into 3D printing equipment to fabricate titanium scaffolds.

RESULTSIndividual scaffolds were designed successfully by two modeling methods. The finite element optimization made 10% decrease of the stress peak and volume decrease of 43%, and the porosity increased to 76.32%. This modeling method was validated by 3D printing titanium scaffold to be feasible and effective.

CONCLUSIONS3D printing technology combined with finite element topology optimization to obtain the ideal mandibular 3D mesh scaffold is feasible and effective.

Feasibility Studies ; Humans ; Mandible ; anatomy & histology ; Porosity ; Printing, Three-Dimensional ; Tissue Engineering ; methods ; Tissue Scaffolds ; Titanium

ObjectiveTo observe the treatment effects in 48 cases of advanced lung cancer patients,with the immune therapy of the dendritic cells loading of tumor autologous antigen (DCTAA) combining with the cells induced factor of the killer cells(CIK)from the matched umbilical cord blood cells.MethodsThe peripheral blood mononuclear cell(PBMC)from the matched umbilical cord blood cells was seperated,and induced to CIK and DC with some cytokines in vitro, such as CD3McAb, IL-2, IFN-γ IL-1α, etc. After 12 to 15 days, the amplified CIK cells obtained were obtained, with the strict quality control, infused the CIK cells to the patients body back in six times,about(5-8)×109 CIK cells in each time.In the fifth day of the cultivation,DETAA cells were loaded and DCTAA cells were collected in the eighth day,and then hypodermic injection was done. The patient' s general situation after the immune treatment was observed, such as the size of the tumors, clinical symptom score, the quality of life and immune indexes. Karnofsky score, weight, toxic side effects and the patient's survival were also studied.ResultsIn the 48 cases with the DCTAA-CIK treatment, complete remission (CR), partial remission (PR)was 37 cases, the overall remission rate was 77.1％. The improvement rate of clinical symptom scores was from 78.9 ％ to 84.7 ％, the increasing rate of Karnofsky score was 89.6 ％ (43/48). 1-year survival reached to 80.6 ％. There were significant difference in little toxic side effects(P ＜ 0.01). The proportion of CD3, CD4 and NK cells in peripheral blood cells increased significantly (P ＜ 0.01) after DCTAA-CIK cells treatment[(42.21±6.12)％, (24.42±3.01)％, 0.99±0.34, (24.98±3.02) ％; (71.58±7.64) ％, (37.25±2.13) ％, 1.62±0.45, (35.23±4.11) ％](t = 6.34, 5.67, 0.25, 4.43, P ＜0.01).ConclusionThe DCTAA-CIK immune therapy is benefit for advanced lung cancer,not only improve the immune function but also ameliorate the clinical symptoms.

0.05). The major toxic reactions in the two groups was tolerable myelo-suppression. The average cost of one patient for two therapeutic cycles was (23664?384.7) and (8519.94?369.1) respectively. Escalation of 1 % of response rate costed (485.02?34.65) and (185.62?23.77) respectively. Prolongation of 1 month of median survival duration costed (2211.59?59.1) and (946.66?43.3) respectively.TTP in group GP is longer than that in group NP(P