BACKGROUND:Nanocell vesicles possess functions such as re-epithelialization,antioxidation,anti-inflammation,and regulation of extracellular matrix remodeling.Meanwhile,apoptotic bodies have the immunomodulatory effects.Therefore,the combination of the two to form nanofusion vesicles can synergistically promote the healing of diabetic skin wounds.OBJECTIVE:To elucidate the impact of nanofusion vesicles on skin wound healing in a diabetic murine model.METHODS:(1)Material preparation and characterization:The primary bone marrow mesenchymal stem cells of C57BL/6J neonatal mice and the neutrophil apoptotic bodies of C57BL/6J mice were isolated and extracted.The nanofusion vesicles were prepared by micro-extrusion mechanism.(2)In vitro experiment:MTT assay was used to detect the proliferative effect of different concentrations of nanofusion vesicles on NIH-3T3 cells and human umbilical vein endothelial cells.Reactive oxygen species fluorescence probe was used to detect the antioxidant effect of nano-fusion vesicles on NIH-3T3 cells treated with hydrogen peroxide(H2O2).The inhibitory effect of nanofusion vesicles on RAW 264.7 macrophage inflammation induced by lipopolyside was detected by real-time quantitative RT-qPCR.(3)In vivo experiment:36 male C57BL/6J mice were employed to develop a murine model of diabetes mellitus.Following the successful induction of diabetes,two circular full-thickness wounds,each with a diameter of 6 mm,were created on either side of the diabetic mice's spine using a skin punch.The mice were divided into three groups by random number table method.The control group was injected with 0.1 mL of phosphate buffer solution.The nanovesicle group was injected with 0.1 mL nanovesicles(25 μg/mL).The nanofusion vesicle group was injected with 0.1 mL nanofusion(25 μg/mL)vesicles.After treatment for three consecutive days,the wound healing and histomorphological changes were observed.RESULTS AND CONCLUSION:(1)In vitro experiment:nanofusion vesicles,when administered at concentrations ranging from 0 to 100 μg/mL,exhibited no toxic effects and promoted the proliferation of NIH-3T3 and HUVEC cell lines.Notably,a concentration of 25 μg/mL nanofusion vesicle significantly enhanced the proliferation of NIH-3T3 cells.Furthermore,the survival rate of human umbilical vein endothelial cells was observed to increase in correlation with escalating concentrations of nanofusion vesicles.Nanofusion vesicles had a good antioxidant effect.In comparison to the H2O2 group,the fluorescence signal indicative of reactive oxygen species was progressively diminished in both the nanovesicle group and the nanofusion vesicle group.Furthermore,nanofusion vesicles possessed anti-inflammatory capabilities,effectively mitigating the inflammatory response in macrophages triggered by lipopolysaccharide stimulation.(2)In vivo experiment:Hematoxylin-eosin and Masson's trichrome staining revealed that in comparison to the control group,both the nanovesicle group and the nanofusion vesicle group exhibited a significant increase in granulation tissue formation and collagen fiber deposition within the wounds by day 6.Notably,the nanofusion vesicle group displayed the most pronounced effects.On day 12,the wound of nanofusion vesicle group was significantly reduced,and the healing rate was significantly faster than that of other groups(P＜0.01),and the effect of promoting wound healing was the most significant.Our findings demonstrated that nanofusion vesicles exhibited superior pro-cell proliferative,antioxidant,and anti-inflammatory properties,thereby exerting a beneficial effect on the promotion of skin wound healing in diabetic mouse models.

BACKGROUND:Periprosthetic joint infection is the most common cause of early failure after total knee replacement.The current methods of preventing periprosthetic joint infection by improving the surface of the prosthesis have limitations to varying degrees.OBJECTIVE:To construct a coating material that can stably improve the surface of the implant,prevent the initial floating bacterial infection of periprosthetic infection,and regulate the bone transfer function around the implant.METHODS:(1)Material preparation:YGF polypeptide(which promotes bone formation),LL-37 polypeptide(with antibacterial properties)and YGF+LL-37 composite peptide were prepared by Fmoc solid phase peptide synthesis technology.The titanium-based materials were immersed in the three polypeptide solutions for 2 hours to obtain YGF coating,LL-37 coating and composite peptide coating coated titanium sheets.(2)In vitro experiment:Uncoated titanium sheets and coated titanium sheets were co-cultured with Escherichia coli(or Staphylococcus aureus)and the colonies were counted by plate method.MC3T3 cells were inoculated on the surface of uncoated titanium sheet and coated titanium sheet,respectively.Alizarin red staining was used to observe the calcium salt deposition on the surface of the material.Western blot assay was used to detect the protein expression of RUNX2,osteocalcin,osteopontin,and bone morphogenetic protein 2.(3)Animal experiment:24 SD rats were randomly divided into three groups:the blank group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal;the control group(n=8)was implanted with uncoated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension;the experimental group(n=8)was implanted with composite peptide coated titanium nails in the femoral medullary canal+intra-articular injection of Staphylococcus aureus suspension.After 5 weeks of implantation,micro-CT examination,hematoxylin-eosin staining and immunohistochemical staining of femur specimens were performed.RESULTS AND CONCLUSION:(1)In vitro experiment:Compared with uncoated titanium sheet and YGF coated titanium sheet,LL-37 coated and composite peptide coated titanium sheet could significantly inhibit the growth and reproduction of Escherichia coli and Staphylococcus aureus.Compared with uncoated titanium sheets and LL-37-coated titanium sheets,YGF-coated and composite peptide-coated titanium sheets could promote calcium salt deposition in osteoblasts and increase the protein expression of RUNX2,osteocalcin,osteopontin and bone morphogenetic protein 2.(2)Animal experiment:Micro-CT test showed that the control group had less bone mass than the blank group and the experimental group.Hematoxylin-eosin staining showed that there was a large amount of fibrous tissue around the nail channel in the control group,only a small amount of tissue fibrosis around the nail channel in the blank group,and only a small amount of tissue fibrosis around the nail channel in the experimental group.Immunohistochemical staining showed that the protein expression of interleukin 1β and tumor necrosis factor α in the control group was higher than that in the blank group and the experimental group,and the expression of osteocalcin,RUNX2 and osteopontin in the experimental group was higher than that in the blank group and the control group.(3)The results show that the titanium-based material coated with YGF+LL-37 composite peptide coating has good antibacterial ability and can promote bone transfer around the implant.

BACKGROUND:Currently,there are many modeling methods for pelvic organ prolapse animal models,and the commonly used methods are vaginal balloon dilatation,oophorectomy and the combination of the two.There is no study comparing the three modeling methods in detail.OBJECTIVE:To construct and validate a rat animal model of pelvic organ prolapse using three different methods and to identify the advantages and disadvantages of various models.METHODS:Seventy-two 8-week SPF-grade female Sprague-Dawley rats were selected and randomly divided into four groups,namely,vaginal balloon dilatation group,ovariectomy group,ovariectomy combined with vaginal balloon dilatation group(the combined group),and the sham-operated group(no ovariectomy and no vaginal dilatation).The vaginal wall tissues of rats were collected at 4,8 and 12 weeks after the operation for hematoxylin-eosin staining,Masson staining,EVG staining and immunohistochemical staining of α-smooth muscle actin,Vimentin and matrix metalloproteinase 9 detection,and the pelvic floor muscle tissues were taken at 4,8 and 12 weeks after the operation for hematoxylin-eosin staining,Masson staining and EVG staining.RESULTS AND CONCLUSION:(1)Hematoxylin-eosi staining showed that there was no significant difference in the decrease of vaginal epithelial layer thickness in the vaginal balloon dilatation group compared with the sham-operated group,(P＞0.05),while the thickness of the vaginal epithelial layer was significantly reduced in the ovariectomy group and the ovariectomy combined with vaginal balloon dilation group(P＜0.001),and the reduction was more significant in the ovariectomy combined with vaginal balloon dilation group,remained stable at 8 weeks after surgery and lasted until 12 weeks.(2)The changes in the content of collagen fibers and elastic fibers in the vaginal wall stained by Masson and EVG staining were the same as the changes in the thickness of the vaginal epithelial layer stained by hematoxylin-eosin,and there were no changes in collagen fibers and elastic fibers in the pelvic floor muscle tissues of the treatment groups.(3)At 4,8 and 12 weeks after treatment,there was no significant difference in the expression levels of α-smooth muscle actin,Vimentin and matrix metalloproteinase 9 in the vaginal wall tissue of the balloon dilation group compared with the control group(P＞0.05),whereas the expression levels of α-smooth muscle actin and Vimentin were significantly decreased in the ovariectomy group and ovariectomy combined with vaginal balloon dilation group(P＜0.01)and the expression of matrix metalloproteinase 9 showed a significant increase(P＜0.01),with a more pronounced increase in the ovariectomy combined with vaginal balloon dilation group,and the increase reached a stable state at 8 weeks after surgery and could persist up to 12 weeks.To conclude,vaginal balloon dilatation could not maintain the degeneration of pelvic organ prolapse formed by the vaginal wall for a long period,and both ovariectomy and the combined method can be used.Ovariectomy combined with vaginal balloon dilatation can significantly accelerate and aggravate the formation of typical histological features of pelvic organ prolapse in vaginal wall tissues,effectively shorten the experimental period,and improve the efficiency.These effects reach a stable state at 8 weeks after surgery and can be sustained up to 12 weeks,which is practical and convenient for the study of pelvic organ prolapse animal models.

BACKGROUND:Radiotherapy significantly improves survival rates in patients with various malignant tumors.However,with prolonged post-treatment survival,many patients face the risk of radiation-related cardiac toxicity.This is especially true after chest radiotherapy,where the risk of radiation-induced heart disease significantly increases,becoming one of the most severe complications affecting prognosis survival.OBJECTIVE:To identify diagnostic markers of endothelial cellular senescence in radiation-induced heart disease through systematic transcriptomic analysis.METHODS:Firstly,genes associated with cellular senescence were screened from the CellAge database and intersected with the transcriptomic training dataset of a mouse model of radiation-induced heart disease to identify differentially expressed senescence-related genes.Secondly,weighted gene co-expression network analysis and machine learning were used to identify key hub genes that play critical roles in radiation-induced heart disease.The expression of these genes was validated using a dataset of radiation-induced endothelial injury.Additionally,the quanTlseq method was employed to assess the immune infiltration status related to radiation-induced heart disease.The expression levels of key genes and their association with survival in esophageal squamous cell carcinoma patients receiving chest radiotherapy were explored through the analysis of The Cancer Genome Atlas database.RESULTS AND CONCLUSION:(1)Systematic transcriptomic analysis identified CCND1 as the core gene of endothelial cellular senescence in radiation-induced heart disease,and this finding was validated in the mouse model of radiation-induced heart disease.(2)The diagnostic model constructed from these data indicated that CCND1 had high specificity and sensitivity for diagnosing radiation-induced heart disease.(3)Immune infiltration analysis revealed significant immune response dysregulation in the mouse model of radiation-induced heart disease,and CCND1 was closely related to various immune cells.(4)Kaplan-Meier survival analysis showed that CCND1 was associated with poorer disease-specific survival in esophageal squamous cell carcinoma patients receiving chest radiotherapy.This study systematically uncovers,for the first time,the pivotal role of CCND1 in endothelial cell senescence associated with radiation-induced heart disease.CCND1,a gene integral to cell cycle regulation,can induce cellular senescence when abnormally expressed.Furthermore,the findings highlight its potential as an early diagnostic marker.

BACKGROUND:Studies have shown that rheumatoid arthritis and osteoporosis are positively correlated,but the causal relationship and related mechanisms have not yet been confirmed.With the cross-fertilization of computer science and life sciences,Mendelian randomization and bioinformatics analyses based on genome-wide association study(GWAS)and transcriptome sequencing data can assess the causal relationship between two diseases,explore the related mechanisms,and mine the therapeutic targets,which will be beneficial to the precision treatment of rheumatoid arthritis combined with osteoporosis.OBJECTIVE:To explore the causal relationship between rheumatoid arthritis and osteoporosis using two-sample Mendelian randomization and to mine potential co-morbid targets and potential targeted drugs through summary-data-based Mendelian randomization and bioinformatics analyses,aiming to provide theoretical basis for mechanism exploration and precision treatment in the field of rheumatoid arthritis combined with osteoporosis.METHODS:(1)Firstly,GWAS data of rheumatoid arthritis,osteoporosis,and cis-expression quantitative trait locus(cis-eQTL)in Asian and European populations were downloaded from the GWAS Catalog,IEU Open GWAS,FinnGen,and eQTLGen databases,and were used for two-sample Mendelian randomization analysis and summary-data-based Mendelian randomization analysis.(2)Transcriptome sequencing data of rheumatoid arthritis(GSE93272 and GSE15573)were downloaded from the GEO database for bioinformatics analysis.(3)Subsequently,forward and inverse Mendelian randomization analyses between rheumatoid arthritis and osteoporosis were performed,and inverse variance weighted was used as the main metric for the analyses,and the results were corroborated with MR Egger,simple mode,weighted median and weighted mode.(4)Then,the genes closely related to rheumatoid arthritis and osteoporosis were identified based on the summary-data-based Mendelian randomization analysis,and the co-disease targets of rheumatoid arthritis and osteoporosis were mined based on cross-analysis.Meanwhile,the biological functions of the co-morbid targets were verified based on bioinformatics analysis and cellular experiments.(5)In addition,a rheumatoid arthritis risk prediction nomogram was constructed based on DYRK2,and its prediction performance was verified by receiver operating characteristic curve,correction curve and decision curve.Finally,the target potential drugs were mined based on Enrichr database and molecular docking was performed.RESULTS AND CONCLUSION:(1)Forward Mendelian randomization analysis of rheumatoid arthritis and osteoporosis showed statistically significant results except for GCST90044540 and GCST90086118,and all other results indicated a significant causal relationship and positive correlation between rheumatoid arthritis and osteoporosis.(2)Inverse Mendelian randomization analysis suggested that no significant causal relationship was seen between osteoporosis and rheumatoid arthritis.(3)Summary-data-based Mendelian randomization analysis identified a total of 412 and 344 genes positively associated with rheumatoid arthritis and osteoporosis,and 421 and 347 genes negatively associated.Based on the cross-analysis,26 co-morbid genes were subsequently obtained.Among them,DYRK2 was a potential therapeutic target,and subsequent bioinformatics analysis and cellular experiments confirmed its important role in the progression of rheumatoid arthritis and osteoporosis.(4)Furthermore,the constructed nomogram has excellent predictive performance.Finally,four potential DYRK2-targeting drugs(undecanoic acid,metyrapone,JNJ-38877605,and ACA)were discovered and molecular docking also demonstrated reliable targeting ability.(5)In conclusion,based on GWAS data from Asian and European populations,we successfully demonstrated that rheumatoid arthritis and osteoporosis are causally related at the genetic level,DYRK2 is a potential therapeutic target,and four small molecules are potential target drugs.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

OBJECTIVE:Elevated blood pressure increases the risk of cardiovascular diseases.Isometric exercise training has been shown to significantly reduce resting blood pressure,but the factors influencing its effectiveness remain unclear,and specific application guidelines are yet to be established.This study aims to evaluate the impact of isometric exercise training on resting blood pressure through meta-analysis,explore its moderating factors,and provide evidence-based recommendations based on its dose-response relationship.METHODS:Following the PRISMA guidelines,a systematic search was conducted in PubMed,Embase,Cochrane Library,Scopus,and Web of Science databases using keywords"Isometric exercise training,""Systolic blood pressure,"and"Diastolic blood pressure,"covering literature up to September 2024.Randomized controlled trials involving isometric exercise training and resting blood pressure were included.Three independent researchers performed literature screening and data extraction,assessing bias risk and quality grades using the Risk of Bias 2.0 tool and GRADE framework.Main effect pooling,publication bias assessment,subgroup,and regression analysis were conducted using R software(version 4.3.4).RESULTS:A total of 28 articles(comprising 32 randomized controlled trials)involving 977 participants were included.(1)Meta-analysis results indicated that isometric exercise training significantly reduced resting systolic blood pressure(MD=-8.01,95％CI=-9.22 to-6.80,P＜0.01,I2=18.20％,low evidence grade)and diastolic blood pressure(MD=-3.46,95％CI=-4.64 to-2.28,P＜0.01,I2=0％,moderate evidence grade)compared to no exercise.(2)Subgroup analysis results revealed significant influences of gender,health status,exercise modality,frequency,intensity,duration,sets per session,rest duration,and baseline blood pressure on the main effects for both systolic(P＜0.01)and diastolic blood pressure(P＜0.05).(3)Regression analysis results did not show any significant influencing factors,but body mass index(β=-4.11,P=0.091)showed a significant negative trend on the main effect for systolic blood pressure.(4)No significant publication bias was observed in the meta-analysis results(P＞0.05).CONCLUSION:(1)Isometric exercise training significantly lowers systolic(low evidence grade)and diastolic(moderate evidence grade)blood pressure with clinically meaningful thresholds.(2)Participant characteristics(gender,health status,baseline blood pressure,and body mass index)and isometric exercise training protocols(modality,frequency,intensity,duration,cycle,sets per session,and rest duration)influence its antihypertensive effects.(3)The article recommends the optimal blood pressure management prescription:three sessions per week,with four sets per session,each set lasting 2 minutes with a 2-minute rest,at an intensity of 95％HRpeak using isometric wall squat exercises;the intervention period can be adjusted around a 6-week node.Future high-quality research is urgently needed to further validate and support these conclusions.

BACKGROUND:Clinical studies suggest that both bone quality and excessive crown-to-implant ratio are factors that affect the success rate of implant surgery,but there is no consensus on how large the crown-to-implant ratio under each bone quality will affect the prognosis of implant repair.OBJECTIVE:To analyze the stress and strain of bone tissue around implant restorations with different crown-to-implant ratios under different bone types after stress loading using three-dimensional finite element method.Combined with the Frost bone mechanics regulation system theory,the physiological limits of bone strain were observed for each bone type within a certain range of crown to implant ratios.METHODS:Cone beam CT data were selected from a patient to establish solid bone block models with four different bone types(class Ⅰ bone:cortical bone thickness 3 mm+dense cancellous bone,class Ⅱ bone:cortical bone thickness 2 mm+relatively dense cancellous bone,class Ⅲ bone:cortical bone thickness 1 mm+relatively low-density cancellous bone,class Ⅳ bone:cortical bone thickness 1 mm+low-density cancellous bone).Implant restorations with five different crown-to-implant ratios(1,1.5,2,2.5,and 3)were created on each bone block model,for a total of 20 models.Vertical and oblique forces were applied to the dental crown to observe the von Mises stress values,strains,and displacement of the cortical and cancellous bones,as well as the degree of implant displacement.RESULTS AND CONCLUSION:(1)In the class Ⅰ bone model,when the crown-to-implant ratio reached 3 under oblique loading,the cortical bone strain exceeded the physiological limit.In the class Ⅱ bone model,under oblique loading,when the crown-to-implant ratio reached 2.5,the cortical bone strain exceeded the physiological limit.In the class Ⅲ bone model,under oblique loading,cortical bone exceeded the physiological limit when the crown-to-implant ratio reached 2.5,while cancellous bone reached the critical physiological limit at 1.In the class Ⅳ bone model,under oblique loading,when the crown-to-implant ratio reached 1.5,2,2.5,and 3,the cortical bone strain exceeded the physiological limit.In the class Ⅳ bone model,all five crown-to-implant ratios of cancellous bone exceeded physiological limits.(2)Under vertical load,the cancellous bone strain exceeded the physiological limit when the crown-root ratio reached 1,2,2.5,and 3 in the class Ⅲ bone model,and when the cancellous bone strain of the five crown-root ratios in the class Ⅳ bone model exceeded the physiological limit.(3)Under oblique or vertical load,the implant displacement of the 20 groups of models did not exceed 100 μm.(4)From the perspective of biomechanics,when patients with insufficient bone height choose implant restoration,the crown-root ratio that class Ⅰ bone can tolerate is up to 2.5 times,the crown-root ratio that class Ⅱ bone can tolerate is up to 2 times,and the crown-root ratio that class Ⅲ and class Ⅳ bones can tolerate is up to 1 times due to excessive strain of cancellous bone;but the crown-root ratio that cortical bone in class Ⅲ bone can tolerate is up to 2 times.Whether class Ⅲ bone can tolerate implant restoration with a high crown-root ratio and whether cancellous bone can tolerate higher strains needs further study.

BACKGROUND:Distinct risk factors for new adjacent vertebral fractures following percutaneous vertebroplasty in the elderly patients with osteoporotic vertebral compression fractures and underlying diseases may be different,yet there is a scarcity of pertinent research on this topic.OBJECTIVE:To investigate the high-risk factors for refracture in patients with osteoporotic vertebral compression fractures following percutaneous vertebroplasty and to delve deeper into the correlation between these risk factors and the recurrence of fractures in the operated vertebra as well as its adjacent vertebrae post-percutaneous vertebroplasty.METHODS:According to the inclusion criteria,412 patients with osteoporotic vertebral compression fractures who underwent percutaneous vertebroplasty at the Sixth Affiliated Hospital of Xinjiang Medical University between January 2018 and December 2023 were retrospectively screened.According to whether re-fracture occurred during the follow-up period,the patients were divided into a re-fracture group(n=75)and a non-re-fracture group(n=337).The following variables of the two groups of patients were reviewed:age,gender,body mass index,cement leakage,bone density T value,cement dosage,occupation,smoking,drinking,adverse reactions,medical insurance,hypertension,type 2 diabetes,chronic obstructive pulmonary disease,cerebral hemorrhage,coronary heart disease,psychological trauma,psychiatric treatment,osteoarthritis,gout,scoliosis,spinal surgery,chronic kidney,anti-osteoporosis treatment,previous fracture history(fracture caused by osteoporosis)and fracture injury plane.The above factors were analyzed using univariate analysis.The factors with P＜0.05 were subjected to binary logistic analysis to explore the related factors of postoperative vertebral recompression fracture.RESULTS AND CONCLUSION:(1)Univariate analysis showed that after percutaneous vertebroplasty,vertebral refracture was associated with age,smoking history of＞10 years,cement leakage,hypertension,type 2 diabetes,scoliosis,spinal surgery,and chronic kidney disease,with statistically significant differences(P＜0.05).(2)By binary Logistic regression,bone cement leakage condition(OR=2.547,95％CI:1.283-5.048,P＜0.05),smoking history＞10 years(OR=2.336,95％CI:1.157-4.701,P＜0.05),a history of hypertension(OR=4.657,95％CI:2.137-10.242,P＜0.05),a history of type 2 diabetes mellitus(OR=8.956,95％CI:3.941-21.301,P＜0.05),and a medical history of scoliosis(OR=3.754,95％CI:1.755-8.619,P＜0.05),medical history of spinal surgery(OR=2.700,95％CI:1.058-6.725,P＜0.05),and a history of chronic kidney disease(OR=2.812,95％CI:1.078-7.739,P＜0.05)were risk factors for refracture of the operated vertebral body and adjacent vertebrae.(3)The results showed that cement leakage,smoking for＞10 years,hypertension,type 2 diabetes mellitus,scoliosis,spinal surgery,and chronic kidney were risk factors for recurrent fractures of the operated vertebrae and adjacent vertebrae in patients with osteoporotic vertebral compression fractures.Surgeons should conduct a comprehensive assessment of patients before percutaneous vertebroplasty in order to more accurately predict the possibility of re-fracture and provide a basis for the formulation of personalized treatment plans to reduce the risk of future recurrent fractures.

BACKGROUND:Studies have shown that disorders of mineral metabolism may be responsible for premature aging and that the kl/FGF23 axis plays an important role in mineral metabolism.OBJECTIVE:To explore the effect of long-term endurance exercise on the kl/FGF23 axis in naturally aging mice,and to observe the impact of long-term endurance exercise on calcium and phosphorus metabolism,so as to provide a reference for the influence of long-term endurance exercise on natural aging.METHODS:Twenty-two 5-week-old SPF male balb/c mice were randomly divided into three groups:young and quiet control group,natural aging quiet group and natural aging exercise group.Mice in the young and quiet control group were then killed immediately.Mice in the natural aging quiet group were raised normally until 60 weeks of age.Mice in the natural aging exercise group were subjected to adaptive exercise for 1 week,followed by the maximum running speed test.The official exercise speed was set at 70％of the maximum running speed,and exercise was performed on Mondays,Wednesdays,and Fridays for 50 minutes each.Maximum running speed was retested at 8-week intervals to adjust the official exercise speed until the age of 60 weeks.(3)Enzyme-linked immunoassay was used to measure the levels of femoral fibroblast growth factor 23,renal fibroblast growth factor receptor 1,1α-hydroxylase,and serum 1,25(OH)2D3.RESULTS AND CONCLUSION:(1)Compared with the young and quiet control group,serum calcium and phosphorus levels in natural aging quiet group had no significant changes(P＞0.05),but bone calcium and phosphorus levels were significantly reduced(P＜0.01).Compared with the natural aging quiet group,the serum phosphorus level was significantly reduced(P＜0.05),the serum calcium level did not change(P＞0.05),and bone calcium and phosphorus levels were significantly increased in the natural aging exercise group(P＜0.05).(2)Compared with the young and quiet control group,the level of fibroblast growth factor 23 in the femur of the natural aging quiet group was significantly increased(P＜0.05).Compared with the natural aging quiet group,the level of fibroblast growth factor 23 in the femur of the natural aging exercise group was reduced,but it was not statistically significant(P＞0.05).(3)Compared with the young and quiet control group,the renal Klotho protein expression,the renal fibroblast growth factor receptor 1,1α-hydroxylase,and serum 1,25(OH)2 D3 levels in the natural aging quiet group were significantly decreased(P＜0.05,P＜0.01).Compared with the natural aging quiet group,the levels of the above-mentioned indicators were significantly increased in the natural aging exercise group(P＜0.05,P＜0.01).To conclude,long-term endurance exercise can regulate Klotho protein and fibroblast growth factor 23 through the kl/FGF23 axis,thereby affecting the expression of 1α-hydroxylase and the level of 1,25(OH)2D3,and further regulating the body's calcium and phosphorus metabolism,especially phosphate metabolism.This indicates that long-term endurance exercise can delay the natural aging of the body through the kl/FGF23 axis.