Objective This study reports on the obligatory parasitism of water mites Arrenurus sp. on Anopheles messeae at the Manzhouli Port, Inner Mongolia, China. Methods Duing July 2024, a survey on the mosquito diversity was conducted at the Manzhouli Port. Captured mosquitoes and their ectoparasites were identified to species level. Results A total of 1840 adult mosquitoes were collected, representing species from three genera: Culex(Cx. modestus, Cx. pipiens pallens), Aedes(Ae. dorsalis, Ae. flavidorsalis, Ae. flavescens), and Anopheles (An. messeae). Among all the mosqutioes specimens,3 out of 150 captured An. messeae were found to carry ectoparasitic mites, with number of 2,4,27 mites separately. Morphological and molecular identification reached the same result as water mites(Hydrachnidiae, Hydracrina). COI gene sequence showed 94% similarity with the closest species Arrenurus truncatellus. Conlusions Literature review suggests water mites are host-specific parasitism of mosquito species and herein with the first record of Arrenurus sp. parasiting on An. Messeae in the most high-latitude region globally.

Owing to its inherent advantages—such as being non-destructive, rapid, highly molecule-specific, and minimally interfered with by moisture—Raman spectroscopy has been widely adopted in the fields of skin barrier function assessment, monitoring the transdermal penetration of active cosmetic ingredients, and the identification and quality control of cosmetic products. Despite these strengths, the practical application of this technique faces a significant bottleneck: the strong fluorescence background generated by endogenous skin components and exogenous cosmetic additives. Endogenous skin substances, such as structural proteins (e.g., collagen and elastin), metabolic coenzymes (e.g., nicotinamide adenine dinucleotide), and pigments (e.g., melanin), together with exogenous cosmetic constituents like organic colorants, chemical sunscreens, and fragrances, often possess strong absorption and emission characteristics. When excited by lasers, these components produce a fluorescence background that can be 10⁶ to 10⁸ times stronger than the Raman scattering signals, effectively masking the inherently weak vibrational fingerprint information. In recent years, driven by the rapid development of optoelectronic hardware and artificial intelligence algorithms, fluorescence suppression strategies have evolved from isolated, single-method approaches into comprehensive, multi-level synergistic systems. These systems are categorized into three distinct tiers: sample preparation, signal acquisition, and data processing. At the sample preparation level, techniques such as photobleaching and surface-enhanced Raman spectroscopy (SERS) are employed to eliminate or bypass the generation of fluorescence at the source. At the signal acquisition level, instrumental improvements—including the use of long-wavelength near-infrared excitation (typically 785 nm or 1 064 nm), confocal spatial filtering, and shifted excitation Raman difference spectroscopy (SERDS)— are utilized to physically isolate Raman signals from the fluorescence background. Furthermore, at the data processing level, numerical baseline correction methods such as polynomial fitting, penalized least squares (e.g., airPLS, arPLS), wavelet transform, and derivative algorithms are increasingly integrated into the analytical pipeline to extract Raman spectral features from mixed signals without increasing hardware costs or acquisition time. This review provides a systematic categorization and critical evaluation of these fluorescence suppression methods, detailing their underlying principles, technical advantages, and inherent limitations in diverse experimental setups. By focusing on critical application scenarios—including skin barrier assessment, percutaneous absorption monitoring, the routine quality control of cosmetics, and the emerging field of portable on-site detection—this paper explores the current state of technique selection and optimization. Finally, the article discusses future development trends, emphasizing the necessity of constructing adaptive, tiered suppression strategies, developing intelligent and automated data processing algorithms, and promoting the integration of portable, multi-modal diagnostic devices. The objective of this review is to provide a comprehensive technical reference to facilitate the transition of Raman spectroscopy from a specialized laboratory tool into a routine, robust analytical platform for advancements in skin science and cosmetic research.

Objective To analyze the epidemiological characteristics and risk factors of chronic kidney disease in patients with 10 years of hypertension. Methods A total of 350 patients with 10 years or longer course of hypertension who underwent physical examination in the Second Affiliated Hospital of Air Force Medical University from June 2021 to June 2024 were selected. General information of the patients was collected through questionnaires. Renal function related indicators and imaging results were obtained through relevant laboratory tests and imaging examinations. Based on the results of renal function related indicators, the epidemiological characteristics of chronic kidney disease in hypertensive patients with 10 years of hypertension, as well as risk factors for chronic kidney disease in the hypertensive patients were identified. Results Among the 350 patients enrolled in this study, there were 71 (20.29%) with proteinuria, 32 (9.14%) with hematuria, and 40 (11.43%) with decreased renal function. A total of 80 (22.86%) cases with structural variations such as kidney stones and cysts were detected by renal B-mode ultrasound. There were 121 (34.57%) patients with hypertension and chronic kidney disease. There were statistically significant differences in gender, age, diabetes, hyperlipidemia and hyperuricemia between patients with chronic kidney disease and those without (P<0.05). Multivariate logistic regression analysis results showed that gender, age, diabetes, hyperlipidemia, and hyperuricemia were the risk factors for chronic kidney disease in patients with hypertension (P<0.05). Conclusion Patients with 10 years of hypertension have a high risk of chronic kidney disease, and the risk factors include gender, age, diabetes, hyperuricemia, and hyperlipidemia.

The innate immune system detects cellular stressors and microbial infections, activating programmed cell death (PCD) pathways to eliminate intracellular pathogens and maintain homeostasis. Among these pathways, pyroptosis, apoptosis, and necroptosis represent the most characteristic forms of PCD. Although initially regarded as mechanistically distinct, emerging research has revealed significant crosstalk among their signaling cascades. Consequently, the concept of PANoptosis has been proposed—an inflammatory cell death pathway driven by caspases and receptor-interacting protein kinases (RIPKs), and regulated by the PANoptosome, which integrates key features of pyroptosis, apoptosis, and necroptosis. The core mechanism of PANoptosis involves the assembly and activation of the PANoptosome, a macromolecular complex composed of three structural components: sensor proteins, adaptor proteins, and effector proteins. Sensors detect upstream stimuli and transmit signals downstream, recruiting critical molecules via adaptors to form a molecular scaffold. This scaffold activates effectors, triggering intracellular signaling cascades that culminate in PANoptosis. The PANoptosome is regulated by upstream molecules such as interferon regulatory factor 1 (IRF1), transforming growth factor beta-activated kinase 1 (TAK1), and adenosine deaminase acting on RNA 1 (ADAR1), which function as molecular switches to control PANoptosis. Targeting these switches represents a promising therapeutic strategy. Furthermore, PANoptosis is influenced by organelle functions, including those of the mitochondria, endoplasmic reticulum, and lysosomes, highlighting organelle-targeted interventions as effective regulatory approaches. Cardiovascular diseases (CVDs), the leading global cause of morbidity and mortality, are profoundly impacted by PCD. Extensive crosstalk among multiple cell death pathways in CVDs suggests a complex regulatory network. As a novel cell death modality bridging pyroptosis, apoptosis, and necroptosis, PANoptosis offers fresh insights into the complexity of cell death and provides innovative strategies for CVD treatment. This review summarizes current evidence linking PANoptosis to various CVDs, including myocardial ischemia/reperfusion injury, myocardial infarction, heart failure, arrhythmogenic cardiomyopathy, sepsis-induced cardiomyopathy, cardiotoxic injury, atherosclerosis, abdominal aortic aneurysm, thoracic aortic aneurysm and dissection, and vascular toxic injury, thereby providing critical clinical insights into CVD pathophysiology. However, the current understanding of PANoptosis in CVDs remains incomplete. First, while PANoptosis in cardiomyocytes and vascular smooth muscle cells has been implicated in CVD pathogenesis, its role in other cell types—such as vascular endothelial cells and immune cells (e.g., macrophages)—warrants further investigation. Second, although pathogen-associated molecular patterns (PAMPs) and damage-associated molecular patterns (DAMPs) are known to activate the PANoptosome in infectious diseases, the stimuli driving PANoptosis in CVDs remain poorly defined. Additionally, methodological challenges persist in identifying PANoptosome assembly in CVDs and in establishing reliable PANoptosis models. Beyond the diseases discussed, PANoptosis may also play a role in viral myocarditis and diabetic cardiomyopathy, necessitating further exploration. In conclusion, elucidating the role of PANoptosis in CVDs opens new avenues for drug development. Targeting this pathway could yield transformative therapies, addressing unmet clinical needs in cardiovascular medicine.

BACKGROUND:Intertrochanteric fracture of femur has various fracture types and fixation methods,and the mechanical stability of each fixation system is quite different.It is of scientific clinical significance to use finite element analysis method to carry out biomechanical research on various fixation systems. OBJECTIVE:To compare and analyze the mechanical stability of various internal fixations applied to femoral intertrochanteric fracture A031-A2.1 by finite element method. METHODS:Based on the validated finite element model of femur(Intact),the model was cut and made into A031-A2.1 intertrochanteric fracture of femur.Different internal fixation systems were implanted by simulating clinical operation methods,and fixation models of proximal femoral nail antirotation,dynamic hip screw,percutaneous compression plate and proximal femoral locking plate were established respectively.All nodes under the distal femur of the four groups of models were constrained,and compression loads of 700,1 400 and 2 100 N were applied to the femoral head.Von Mises stress distribution and compression stiffness of each group of models were observed through calculation and analysis,and mechanical stability of each group was compared. RESULTS AND CONCLUSION:(1)Through calculation and analysis,after calculating the compression stiffness by comparing the deformation of each model,the compression stiffness of each model under various loads showed the trend:physiological group>proximal femoral nail antirotation group>proximal femoral locking plate group>percutaneous compression plate group>dynamic hip screw group.The compressive stiffness of the complete physiological group model was significantly higher than that of all surgical group models.(2)The stress index was observed.Due to the stress shielding effect,the stress peak value of each fixed group was higher than that of physiological group,and the maximum peak value was concentrated on each internal fixation.Proximal femoral nail antirotation group had the smallest stress peak,while dynamic hip screw group had the highest stress.The stress distribution trend showed physiological group

Objective To investigate the detection rate and related influencing factors of gastrointestinal diseases in grass-roots personnel.Methods A total of 481 grass-roots personnel were enrolled and examined by magnetic-controlled capsule endoscopy(MCCE).Multivariate logistic regression were used to analyze the influencing factors of gastrointestinal diseases detected by MCCE.Results All personnel completed MCCE,and gastrointestinal diseases were detected in 154(32.0%)cases,including 106 cases of erosive gastritis,25 cases of chronic atrophic gastritis,17 cases of digestive tract polyp,16 cases of gastric ulcer,5 cases of reflux esophagitis,4 cases of cardia,1 case of duodenitis,and 1 case of enteritis.Gastrointestinal diseases was correlated with special operation posts,long-term tasks within recent 6 months,abdominal distension,belching,nausea and vomiting,diarrhea and other symptoms(all P＜0.05).Multivariate logistic regression analysis showed that the risk factors of gastrointestinal diseases were working in special operation posts,performing long tasks within 6 months,belching,nausea and vomiting symptoms(all P＜0.05).Conclusion The overall detection rate of gastrointestinal diseases(mainly acid related diseases)is relatively high,and its incidence is closely related to working in special operation posts and performing long-term tasks within recent 6 months.Personnel working in special operation posts should be more alert to gastrointestinal diseases.Gastrointestinal symptoms have reference value for the prediction of lesions,but more attention should be paid to the identification of functional gastrointestinal diseases with endoscopy.

Objective To explore the predictive value of fat attenuation index(FAI)and fibrous plaque index(FPI)for the prognosis of patients with acute coronary syndrome(ACS).Methods A retrospective cohort study was conducted on 334 ACS patients undergoing percutaneous coronary intervention(PCI)in the First Affiliated Hospital of Army Military Medical University and Yongchuan Hospital of Chongqing Medical University from March 2021 to July 2023.All patients received coronary computed tomography angiography(CCTA)to measure FAI and FPI.According to the occurrence of major adverse cardiovascular events(MACE)with 1 year of follow-up,they were divided into MACE group(n=108)and non-MACE group(n=226).The baseline data,CCTA data and results of laboratory tests were collected and compared between the 2 groups.Multivariate logistic regression analysis was used to analyze the relationship of FAI and FPI with the prognosis of ACS patients,and ROC curve was drawn to evaluate its predictive efficiency.Results Among the 334 ACS patients,108(32.34%)experienced MACE.When compared with the non-MACE group,the MACE group exhibited significantly larger proportions of diabetes(72.22%vs 31.86%)and left main coronary artery disease(18.52%vs 7.08%),but lower success rate of operation(79.63%vs 93.81%,P<0.05).Radiologic results showed that the proportion of severe stenosis(20.37%vs 10.62%),FAI(-80.12±6.41 HU vs-72.34±7.09 HU)and FPI(0.58±0.41 vs 0.26±0.12)were obviously increased in the MACE group than the non-MACE group(P<0.05).Laboratory tests indicated that there were statistical differences between the 2 groups in high-density lipoprotein-cholesterol(HDL-C,1.20±0.15 vs 1.09±0.16 mmol/L),miR-126(0.91±0.12 vs 0.96±0.15)and SST2(38.45±5.67 vs 34.30±4.89 ng/mL,P<0.05).Multivariate Logistic regression analysis revealed that FAI(OR=1.200,95%CI:1.136～1.268),FPI(OR=63.157,95%CI:14.126～282.374),moderate stenosis(OR=1.332,95%CI:1.024～1.859),severe stenosis(OR=1.480,95%CI:1.074～2.039),miR-126(OR=0.007,95%CI:0.001～0.077),and sST2(OR=1.192,95%CI:1.113～1.277)were independent predictors of MACE(P<0.05).ROC curve analysis displayed that stenosis degree(AUC=0.622,95%CI:0.561～0.683,P=0.001),FAI(AUC=0.790,95%CI:0.741～0.839,P=0.001)and FPI(AUC=0.700,95%CI:0.638～0.761,P=0.001),miR-126(AUC=0.646,95%CI:0.584～0.707,P=0.001),sST2(AUC=0.700,95%CI:0.638～0.761,P=0.001)had certain predictive values for ACS prognosis.Conclusion Coronary FAI and FPI can be used as independent prognostic indicators of ACS patients,and their numerical changes are closely related to plaque stability and inflammatory state.

As a serine protease,thrombin can convert soluble fibrinogen into insoluble fibrin and plays a pivotal role in the coagulation cascade.Therefore,the accurate quantitative assay of thrombin levels is of great value in the evaluation of coagulation function,clinical screening and prognostic monitoring of coagulation-related diseases,and screening of drugs for targeted therapy.Existing methods for thrombin detection can be divided into two categories,e.g.,the assay of concentration levels using nucleic acid aptamers as the affinity elements and the assay of activity levels based on the hydrolytic cleavage of substrate peptides.In recent years,electrochemical biosensors have attracted much attention in thrombin detection due to high sensitivity,high selectivity,simple instrument,fast response,and good portability.In this review,the latest research progress in methods for electrochemical detection of thrombin was summarized,focusing on the detection principles and the applied signal amplification strategies of related electrochemical biosensors.In addition,the challenges with respect to the practical use of electrochemical thrombin biosensors and the prospects were discussed.

Objective To construct an aptamer-functionalized carboxylated graphene oxide(CGO)fluo-rescent sensor to achieve highly sensitive and specific detection of ketamine(KET)and its metabolite norketamine(NK)using an aptamer capable of simultaneously recognizing KET and NK.Methods A specific aptamer for simultaneous recognition of KET and NK was screened using graphene oxide-sys-tematic evolution of ligand by exponential enrichment(GO-SELEX)and molecular docking tech-niques.The aptamer,labeled with Cy5 fluorescence,was chemically conjugated to CGO to construct an aptamer-functionalized CGO fluorescent sensor.By optimizing detection conditions,including the mass concentration of CGO,aptamer concentration,reaction temperature,and incubation time,quantita-tive analysis of the target analytes was achieved using the ratio of fluorescence intensity changes be-fore and after target addition.The stability of the sensor in biological matrices was evaluated by moni-toring fluorescence intensity changes over incubation time in blank blood and urine,in comparison with the traditional physical adsorption-based CGO fluorescent sensor.Spiked recovery experiments in blank blood and urine were conducted to compare performance with that of HPLC-MS/MS.Results A specific aptamer A5 was selected and chemically conjugated with CGO to construct the aptamer-functionalized CGO fluorescent sensor.Under optimized conditions,the proposed fluorescent sensor ex-hibited a linear detection range of 1.0-5.0 ng/mL for KET,with a limit of detection(LOD)of 0.86 ng/mL;while for NK,the linear detection range was 1.0-5.0 ng/mL,with an LOD of 0.70 ng/mL.Com-pared with the CGO fluorescent sensor constructed via physical adsorption,this sensor demonstrated greater stability in blood and urine.The spiked recovery rates of KET and NK in blank blood and urine ranged from 81.50%to 110.03%,exhibiting detection performance comparable to that of HPLC-MS/MS.Conclusion The aptamer screening method offers a novel approach for selecting aptamers tar-geting drugs and their metabolites.The constructed aptamer-functionalized CGO fluorescent sensor pro-vides an efficient and reliable strategy for the high-performance detection of KET and NK.

OBJECTIVES: To evaluate the effectiveness of single-balloon and double-balloon enteroscopy in diagnosing pediatric small bowel diseases and assess the diagnostic efficacy of computed tomography enterography (CTE) for small bowel diseases using enteroscopy as the reference standard. METHODS: Clinical data from 576 children who underwent enteroscopy at Hunan Children's Hospital between January 2017 and December 2023 were retrospectively collected. The children were categorized based on enteroscopy type into the single-balloon enteroscopy (SBE) group (n=457) and double-balloon enteroscopy (DBE) group (n=119), and the clinical data were compared between the two groups. The sensitivity and specificity of CTE for diagnosing small bowel diseases were evaluated using enteroscopy results as the standard. RESULTS: Among the 576 children, small bowel lesions were detected by enteroscopy in 274 children (47.6%).There was no significant difference in lesion detection rates or complication rates between the SBE and DBE groups (P>0.05), but the DBE group had deeper insertion, longer procedure time, and higher complete small bowel examination rate (P<0.05). The complication rate during enteroscopy was 4.3% (25/576), with 18 cases (3.1%) of mild complications and 7 cases (1.2%) of severe complications, which improved with symptomatic treatment, surgical, or endoscopic intervention. Among the 412 children who underwent CTE, the sensitivity and specificity for diagnosing small bowel diseases were 44.4% and 71.3%, respectively. CONCLUSIONS SBE and DBE have similar diagnostic efficacy for pediatric small bowel diseases, but DBE is preferred for suspected deep small bowel lesions and comprehensive small bowel examination. Enteroscopy in children demonstrates relatively good overall safety. CTE demonstrates relatively low sensitivity but comparatively high specificity for diagnosing small bowel diseases.
Retrospective Studies ; Treatment Outcome ; Double-Balloon Enteroscopy/statistics & numerical data* ; Single-Balloon Enteroscopy/statistics & numerical data* ; Humans ; Male ; Female ; Child ; Operative Time ; Tomography, X-Ray Computed/statistics & numerical data* ; Sensitivity and Specificity ; Intestine, Small/surgery* ; Intestinal Diseases/surgery*