OBJECTIVETo study the effects of Astragalus polysaccharide (APS), the primary effective component of the Chinese herb medicine Astragalus membranaceus (frequently used for its anti-hepatic fibrosis effects), on nanoscale mechanical properties of liver sinusoidal endothelial cells (SECs).

METHODSUsing endothelial cell medium as the control, 5 experimental groups were established utilizing different concentrations of APS, i.e. 12.5, 25, 50, 100, and 200 μg/mL. By using atomic force microscopy along with a microcantilever modified with a silicon dioxide microsphere as powerful tools, the value of Young's modulus in each group was calculated. SAS 9.1 software was applied to analyze the values of Young's modulus at the pressed depth of 300 nm. Environmental scanning electron microscopy was performed to observe the surface microtopography of the SECs.

RESULTSThe value of Young's modulus in each APS experimental group was significantly greater than that of the control group: as APS concentration increased, the value of Young's modulus presented as an increasing trend. The difference between the low-concentration (12.5 and 25 μg/mL) and high-concentration (200 μg/mL) groups was statistically significant (P<0.05), but no significant differences were observed between moderateconcentration (50 and 100 μg/mL) groups versus low- or high-concentration groups (P>0.05). Surface topography demonstrated that APS was capable of increasing the total area of fenestrae.

CONCLUSIONSThe values of Young's modulus increased along with increasing concentrations of APS, suggesting that the stiffness of SECs increases gradually as a function of APS concentration. The observed changes in SEC mechanical properties may provide a new avenue for mechanistic research of anti-hepatic fibrosis treatments in Chinese medicine.

Animals ; Astragalus Plant ; chemistry ; Biomechanical Phenomena ; drug effects ; Elastic Modulus ; Endothelial Cells ; cytology ; ultrastructure ; Liver ; cytology ; Microscopy, Atomic Force ; Microspheres ; Nanotechnology ; Polysaccharides ; pharmacology ; Rats ; Silicon Dioxide ; chemistry ; Surface Properties

The milk fat globule-EGF-factor 8 protein (MFG-E8) has been identified in various tissues, where it has an important role in intercellular interactions, cellular migration, and neovascularization. Previous studies showed that MFG-E8 is expressed in different cell types under normal and pathophysiological conditions, but its expression in hematopoietic stem cells (HSCs) during hematopoiesis has not been reported. In the present study, we investigated MFG-E8 expression in multiple hematopoietic tissues at different stages of mouse embryogenesis. Using immunohistochemistry, we showed that MFG-E8 was specifically expressed in CD34+ HSCs at all hematopoietic sites, including the yolk sac, aorta-gonad-mesonephros region, placenta and fetal liver, during embryogenesis. Fluorescence-activated cell sorting and polymerase chain reaction analyses demonstrated that CD34+ cells, purified from the fetal liver, expressed additional HSC markers, c-Kit and Sca-1, and that these CD34+ cells, but not CD34- cells, highly expressed MFG-E8. We also found that MFG-E8 was not expressed in HSCs in adult mouse bone marrow, and that its expression was confined to F4/80+ macrophages. Together, this study demonstrates, for the first time, that MFG-8 is expressed in fetal HSC populations, and that MFG-E8 may have a role in embryonic hematopoiesis.
Animals ; Antigens, CD34/analysis ; Antigens, Surface/*analysis ; Bone Marrow/ultrastructure ; Female ; Hematopoietic Stem Cells/*cytology ; Liver/embryology ; Mice/*embryology ; Milk Proteins/*analysis ; Placentation ; Pregnancy

Our previous studies showed that biomodification of demineralized dentin collagen with proanthocyanidin (PA) for a clinically practical duration improves the mechanical properties of the dentin matrix and the immediate resin-dentin bond strength. The present study sought to evaluate the ability of PA biomodification to reduce collagenase-induced biodegradation of demineralized dentin matrix and dentin/adhesive interfaces in a clinically relevant manner. The effects of collagenolytic and gelatinolytic activity on PA-biomodified demineralized dentin matrix were analysed by hydroxyproline assay and gelatin zymography. Then, resin-/dentin-bonded specimens were prepared and challenged with bacterial collagenases. Dentin treated with 2% chlorhexidine and untreated dentin were used as a positive and negative control, respectively. Collagen biodegradation, the microtensile bond strengths of bonded specimens and the micromorphologies of the fractured interfaces were assessed. The results revealed that both collagenolytic and gelatinolytic activity on demineralized dentin were notably inhibited in the PA-biomodified groups, irrespective of PA concentration and biomodification duration. When challenged with exogenous collagenases, PA-biomodified bonded specimens exhibited significantly less biodegradation and maintained higher bond strengths than the untreated control. These results suggest that PA biomodification was effective at inhibiting proteolytic activity on demineralized dentin matrix and at stabilizing the adhesive/dentin interface against enzymatic degradation, is a new concept that has the potential to improve bonding durability.
Chlorhexidine ; chemistry ; pharmacology ; Collagenases ; pharmacology ; Dental Bonding ; Dental Cements ; chemistry ; Dental Stress Analysis ; instrumentation ; Dentin ; drug effects ; ultrastructure ; Dentin-Bonding Agents ; chemistry ; Gelatinases ; pharmacology ; Humans ; Hydroxyproline ; analysis ; Matrix Metalloproteinase 8 ; pharmacology ; Matrix Metalloproteinase Inhibitors ; chemistry ; pharmacology ; Proanthocyanidins ; chemistry ; pharmacology ; Stress, Mechanical ; Surface Properties ; Tensile Strength ; Tooth Demineralization ; pathology ; physiopathology

The purpose of this study was to develop docetaxel-poly (lactide-co-glycolide) (PLGA) loaded nanoparticles by using nanoprecipitation method and optimize the relative parameters to obtain nanoparticles with higher encapsulation efficiency and smaller size. The physicochemical characteristics of nanoparticles were studied. The optimized parameters were as follows: the oil phase was mixture of acetone and ethanol, concentration of tocopheryl polyethylene glycol succinate (TPGS) was 0.2%, the ratio of oil phase to water phase was 1:5, and the theoretical drug concentration was 5%. The optimized nanoparticles were spherical with size between 130 and 150 nm. The encapsulation efficiency was (40.83±2.1)%. The in vitro release exhibited biphasic pattern. The results indicate that docetaxel-PLGA nanoparticles were successfully fabricated and may be used as the novel vehicles for docetaxel, which would replace Taxotere® and play great roles in future.
Acetone ; chemistry ; Antineoplastic Agents ; chemistry ; pharmacokinetics ; Chromatography, High Pressure Liquid ; Drug Compounding ; methods ; Ethanol ; chemistry ; Fractional Precipitation ; methods ; Lactic Acid ; chemistry ; Microscopy, Electron, Scanning ; Nanoparticles ; chemistry ; ultrastructure ; Nanotechnology ; methods ; Particle Size ; Polyethylene Glycols ; chemistry ; Polyglycolic Acid ; chemistry ; Succinates ; chemistry ; Surface Properties ; Taxoids ; chemistry ; pharmacokinetics

BACKGROUNDDendritic cells (DCs) are the most important professional antigen presenting cells that play a key role in initiating adaptive immune responses. The depletion and dysfunction of DCs contribute to the development of immunodeficiency or immunoparalysis in some lung diseases. In the present study, we investigated the effects of Fms-like tyrosine kinase-3 ligand (Flt3L) administration in vivo on lung DCs expansion to provide an experimental basis of Flt3L used as a potential therapeutic agent for the related lung disorders.

METHODSBalb/c mice were randomly divided into Flt3L group (n = 10) and control group (n = 10). Each mouse in the Flt3L group received subcutaneous administration of Flt3L at a dose of 10 µg once daily for nine consecutive days. Lung histology was observed, and CD11c and CD205 were immunologically labeled in lung tissue sections. Low-density lung cells were separated by density gradient centrifugation, and then subsets and MHC-II/I-A(d) expression of DCs were analyzed by flow cytometry.

RESULTSIn the Flt3L group the number and density of DC-like cells were markedly increased compared with the control group, mainly distributed in the alveolar septa. Immunological labeling in situ found that there were significantly higher numbers of CD11c(+) and CD205(+) DCs in lung mesenchymal tissue (P < 0.05), where they formed a denser reticular formation. Flow cytometry analysis demonstrated that the proportions of myeloid CD11c(+)CD11b(+) DCs and plasmacytoid CD11c(+)CD45R/B220(+) DCs in the low-density lung cells in the Flt3L group were significantly higher compared with the control group; showing 3.17- and 3.3-fold increase respectively (P < 0.05). The proportion of CD11c(+) DCs expressing MHC-II/I-A(d+) was significantly increased, with a 2.7-fold increase as compared with the control group (P < 0.05).

CONCLUSIONSFlt3L administration in vivo induces lung DCs expansion, favoring myeloid and plasmacytoid DC subsets, which are phenotypically more mature. Flt3L may be useful in the therapy to augment immune function of the lung.

Animals ; Antigens, CD ; metabolism ; Cells, Cultured ; Dendritic Cells ; drug effects ; metabolism ; ultrastructure ; Flow Cytometry ; Immunohistochemistry ; Lectins, C-Type ; metabolism ; Lung ; drug effects ; metabolism ; ultrastructure ; Male ; Membrane Proteins ; pharmacology ; Mice ; Mice, Inbred BALB C ; Microscopy, Electron, Transmission ; Minor Histocompatibility Antigens ; Random Allocation ; Receptors, Cell Surface ; metabolism

OBJECTIVETo compare the three dimensional morphology and surface roughness changes of enamel eroded for different etching time.

METHODSFifteen freshly extracted sound human pre-molars for orthodontic purpose were collected. The buccal surface of teeth were prepared into smooth enamel slices, and then were randomly divided into 5 groups based on their etching time 0 s (control group), 5 s, 10 s, 20 s, 30 s, respectively by 37% phosphoric acid. The three dimensional morphology was observed under atomic force microscope (AFM). The profile was analyzed, and the value of Ra, Rq, Rz and the surface area and volume were measured.

RESULTSThe AFM photograph showed that with the etching time from 0 s to 20 s the enamel surface demineralised gradually, the top structure of enamel rod and the fish scaled structure became obvious. But the morphology only changed a bit after 20 s. The surrounding inter-rod enamel eroded first, the depth increased to 2.8 µm at 20 s but decreased to 1.8 µm at 30 s. The value of Ra increased from (19.69 ± 3.42) nm to (359.51 ± 75.79) nm, and Rq from (22.02 ± 5.57) nm to (431.02 ± 83.09) nm, Rz from (0.24 ± 0.08) µm to (2.38 ± 0.26) µm. Except for groups 20 s and 30 s, the difference among other groups was statistically significant (P < 0.05). The surface area expanded from (406.77 ± 3.88) µm(2) to (546.69 ± 84.02) µm(2), and surface volume from (65.73 ± 14.46) µm(3) to (474.63 ± 52.50) µm(3).

CONCLUSIONSThe depth, surface roughness, surface area and volume caused by erosion increased with etching time. The three dimensional morphology greatly changed by acid-etching process.

Acid Etching, Dental ; methods ; Analysis of Variance ; Dental Enamel ; drug effects ; ultrastructure ; Humans ; Microscopy, Atomic Force ; Phosphoric Acids ; pharmacology ; Random Allocation ; Surface Properties ; drug effects ; Time Factors

OBJECTIVETo study the effect of Ti-TiO2 nanotubes with different diameters on the adhesion of fibroblast and osteoblast, and to find which diameter was more favorable for cells' respective adhesion.

METHODSPure titanium sheets were polished and then anodized at different potentials for 1 h with Ti as anode and Pt as cathode. TiO2 nanotubes formed at 1, 5, 10 and 20 V potentials served as experimental groups and polished pure titanium served as control group. Field emission scanning electron microscopy (Fe-SEM) was used to analyze the surface topography. Stained nucleus with Hoechst33342 were used to measure the cell adhesion. The cell shape on the sample surface were analyzed with Fe-SEM.

RESULTSTiO2 nanotube array of different inner diameters from 15 nm to 100 nm were grown on titanium sheets by anodization at potentials from 1 to 20 V. At 30, 60 and 120 min, fibroblast adhesion at nanotubes anodized at 5 V was (141 ± 9), (388 ± 14) and (489 ± 15) respectively, significantly less than any other nanotube surface at the same time (P < 0.01). Nanotubes anodized at 20 V had the least inhibitory effect for fibroblast adhesion with a number of (579 ± 14) at 120 min, and the cell shape was also inhibited. At 30, 60 and 120 min, osteoblast had a significant better adhesion on nanotubes formed at 5 V than it did on any other surface at the same time (P < 0.01), except the control group at 30 min, with the adhesion number of (198 ± 10), (431 ± 10) and (501 ± 10) respectively, and osteoblast had a abundant spread on nanotubes formed at 5 V; while osteoblast adhesion on nanotubes anodized at 20 V was (152 ± 11), (403 ± 9) and (465 ± 12) respectively, less than on any other nanotube surface within the same time (P < 0.05), and the cell shape on the surface changed to be more elongate.

CONCLUSIONSFibroblast adhesion is inhabited more or less on Ti-TiO2 nanotubes of different diameters. Nanotubes formed at 5 V have the most osteoblast adhesion, and inhibit fibroblast adhesion.

Animals ; Cell Adhesion ; Fibroblasts ; cytology ; ultrastructure ; Mice ; Microscopy, Electron, Scanning ; Nanotubes ; chemistry ; Osteoblasts ; cytology ; ultrastructure ; Surface Properties ; Titanium ; chemistry

OBJECTIVETo establish the femtosecond laser experimental platform in vitro for numerical controlled cavity preparation, and to evaluate the roughness quantitatively and observe the microscopic morphology of the cutting surface.

METHODSEnamel and dentin planes were prepared on human third molars. A universal motion controller was used to control the samples to do rectangle wave motion perpendicular to the incident direction of the laser at focus. The surface roughness was observed with confocal laser scanning microscope.

RESULTSPrecise ablation of the dental hard tissues can be achieved with the established femtosecond laser numerical control platform. For enamel, the surface roughness of the cavity inside laser scanning line was 7.173 µm at the bottom and 2.675 µm on the wall of the cavity. The surface roughness of the cavity between laser scanning lines was 13.667 µm at the bottom and 33.927 µm on the wall. For dentin, the surface roughness of the cavity bottom was 51.182 µm and 25.629 µm for the wall. Scanning electron microscope images showed no micro-cracks or carbonization on enamel, while carbonization, cracks and a small amount of crystalline particles were observed on dentin.

CONCLUSIONSPrecise tooth preparation can be achieved with femtosecond laser numerical control flatform. The surface roughness of cavity wall was less than that of the bottom and can meet the clinical needs. Suitable femtosecond laser output power should be set for different cutting objects, otherwise it may result in tissue damages.

Dental Cavity Preparation ; methods ; Dental Enamel ; surgery ; ultrastructure ; Dentin ; surgery ; ultrastructure ; Hardness ; Humans ; Laser Therapy ; methods ; Microscopy, Electron, Scanning ; Molar, Third ; surgery ; ultrastructure ; Surface Properties

This study compared a new type of polysaccharide-coated magnetic nanoparticles (in which the polysaccharide is derived from Angelica sinensis) with the dextran magnetic nanoparticles in terms of preparation, biocompatibility and tissue distribution in vivo and in vitro in order to examine the potential application of Angelica polysaccharide as a novel carrier in magnetic drug targeting (MDT). Magnetic nanoparticles were prepared by chemical co-precipitation. Their physical and chemical properties were determined by using the transmission electron microscope (TEM), laser particle size analyzer (DLS) and vibrating sample magnetometer (VSM), and their purity and structure by using X-ray diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR). The atomic absorption spectrometric method was performed for quantification of the iron content in different tissues. Histological sections were stained by Prussian blue staining to observe the disposition of magnetic nanoparticles in the liver and kidney. The results showed that both kinds of magnetic nanoparticles possessed small particle size, good dispersion and good magnetic properties. XRD showed the main component of the two magnetic nanoparticles was Fe(3)O(4) crystals, and FTIR proved Fe(3)O(4) was successfully coated by each polysaccharide, respectively. In vivo, Fe(3)O(4)-dextran accumulated in the liver, spleen and lung and Fe(3)O(4)-Angelica polysaccharide only in the spleen and lung. It was concluded that Angelica polysaccharide may be applied as a novel carrier in the preparation of magnetic nanoparticles.
Angelica sinensis ; chemistry ; Animals ; Coated Materials, Biocompatible ; chemical synthesis ; Liver ; chemistry ; Lung ; chemistry ; Magnetite Nanoparticles ; chemistry ; ultrastructure ; Male ; Materials Testing ; Organ Specificity ; Particle Size ; Polysaccharides ; chemistry ; Rats ; Rats, Sprague-Dawley ; Spleen ; chemistry ; Surface Properties ; Tissue Distribution

Cercaria caribbea LVIII Cable, 1963 (Digenea: Cyathocotylidae) was detected from a brackish water gastropod species (Cerithideopsilla cingulata) in a coatal area of Shinan-gun, Jeollanam-do (Province), the Republic of Korea, and its surface ultrastructure was studied using a scanning electron microscope. The cercariae were found freely swimming or enveloped within daughter sporocysts when the snail host was mechanically broken. They were morphologically characterized by a linguiform and ventrally concave body, a long and bifurcated tail, and the presence of a holdfast (=tribocytic) organ posterior to the ventral sucker. On the whole ventral and dorsal surfaces, peg-like tegumental spines were densely distributed. Around the oral sucker, several sensory papillae, each with a short cilium, were distributed, and on the tail, sensory papillae, each with an extensively long cilium, were observed. This is the first record describing a cyathocotylid cercaria from a brackish water gastropod in the Republic of Korea.
Animal Structures/ultrastructure ; Animals ; Cercaria/*isolation & purification/*ultrastructure ; Gastropoda/*parasitology ; Microscopy, Electron, Scanning ; Republic of Korea ; Surface Properties