ObjectiveTo explore the efficacy and mechanisms of Sini San in the treatment of depression and liver injury based on gut microbiota. MethodsThirty-two male Sprague-Dawley （SD） rats were randomly divided into a normal group， model group （M）， Sini San group （MS， 2.5 g·kg^-1）， and fluoxetine group （MF， 2 mg·kg^-1）. Except for the normal group， rats in the other three groups were subjected to chronic unpredictable mild stress （CUMS）. After 8 weeks， the open-field test and sucrose preference test were conducted. Enzyme-linked immunosorbent assay （ELISA） was used to detect serum corticosterone （CORT）， adrenocorticotropic hormone （ACTH）， corticotropin-releasing factor （CRF）， lipopolysaccharide （LPS）， Zonulin， interleukin-6 （IL-6）， tumor necrosis factor-α （TNF-α）， interleukin-1β （IL-1β）， γ-aminobutyric acid （GABA） levels in the hippocampus and prefrontal cortex， and brain-derived neurotrophic factor （BDNF） levels in the hippocampus. Real-time quantitative polymerase chain reaction （Real-time PCR） was used to detect hippocampal BDNF mRNA expression. Serum alanine aminotransferase （ALT） and aspartate aminotransferase （AST） levels were measured using the ultraviolet lactate dehydrogenase method. The ultrastructure of the intestinal epithelium was observed by electron microscopy， and gut microbiota in rat feces were analyzed using 16S rDNA high-throughput sequencing. ResultsCompared with the normal group， the sucrose preference of rats in the model group was significantly reduced （P0.01）， whereas it was significantly increased in the Sini San group compared with the model group （P0.05）. Compared with the normal group， hippocampal GABA protein levels and BDNF mRNA expression in the model group were significantly decreased （P0.05）， and compared with the model group， both were significantly increased in the Sini San group （P0.05， P0.01）. Compared with the normal group， serum LPS and Zonulin levels in the model group were significantly increased （P0.05， P0.01）， and compared with the model group， Zonulin levels in the Sini San group were significantly decreased （P0.05）. No obvious changes were observed in the ultrastructure of the jejunal mucosa among groups. Compared with the normal group， widened and blurred tight junctions， sparse and shortened microvilli， and mitochondrial swelling with cristae disruption in epithelial cells were observed in the ileal and colonic mucosa of the model group， which were markedly improved in the Sini San and fluoxetine groups. The results of 16S rDNA high-throughput sequencing showed that Sini San improved CUMS-induced dysbiosis of Bacteroidetes and Proteobacteria. Correlation analysis indicated that Bacteroidetes and Proteobacteria were significantly correlated with depression-related indicators， liver function， and intestinal mucosal permeability. ConclusionSini San exerts antidepressant and hepatoprotective effects by improving Bacteroidetes and Proteobacteria and inhibiting the increase in intestinal mucosal permeability in CUMS rats.

ObjectiveTo explore the efficacy and mechanisms of Sini San in the treatment of depression and liver injury based on gut microbiota. MethodsThirty-two male Sprague-Dawley （SD） rats were randomly divided into a normal group， model group （M）， Sini San group （MS， 2.5 g·kg^-1）， and fluoxetine group （MF， 2 mg·kg^-1）. Except for the normal group， rats in the other three groups were subjected to chronic unpredictable mild stress （CUMS）. After 8 weeks， the open-field test and sucrose preference test were conducted. Enzyme-linked immunosorbent assay （ELISA） was used to detect serum corticosterone （CORT）， adrenocorticotropic hormone （ACTH）， corticotropin-releasing factor （CRF）， lipopolysaccharide （LPS）， Zonulin， interleukin-6 （IL-6）， tumor necrosis factor-α （TNF-α）， interleukin-1β （IL-1β）， γ-aminobutyric acid （GABA） levels in the hippocampus and prefrontal cortex， and brain-derived neurotrophic factor （BDNF） levels in the hippocampus. Real-time quantitative polymerase chain reaction （Real-time PCR） was used to detect hippocampal BDNF mRNA expression. Serum alanine aminotransferase （ALT） and aspartate aminotransferase （AST） levels were measured using the ultraviolet lactate dehydrogenase method. The ultrastructure of the intestinal epithelium was observed by electron microscopy， and gut microbiota in rat feces were analyzed using 16S rDNA high-throughput sequencing. ResultsCompared with the normal group， the sucrose preference of rats in the model group was significantly reduced （P<0.01）， whereas it was significantly increased in the Sini San group compared with the model group （P<0.05）. Compared with the normal group， hippocampal GABA protein levels and BDNF mRNA expression in the model group were significantly decreased （P<0.05）， and compared with the model group， both were significantly increased in the Sini San group （P<0.05， P<0.01）. Compared with the normal group， serum LPS and Zonulin levels in the model group were significantly increased （P<0.05， P<0.01）， and compared with the model group， Zonulin levels in the Sini San group were significantly decreased （P<0.05）. No obvious changes were observed in the ultrastructure of the jejunal mucosa among groups. Compared with the normal group， widened and blurred tight junctions， sparse and shortened microvilli， and mitochondrial swelling with cristae disruption in epithelial cells were observed in the ileal and colonic mucosa of the model group， which were markedly improved in the Sini San and fluoxetine groups. The results of 16S rDNA high-throughput sequencing showed that Sini San improved CUMS-induced dysbiosis of Bacteroidetes and Proteobacteria. Correlation analysis indicated that Bacteroidetes and Proteobacteria were significantly correlated with depression-related indicators， liver function， and intestinal mucosal permeability. ConclusionSini San exerts antidepressant and hepatoprotective effects by improving Bacteroidetes and Proteobacteria and inhibiting the increase in intestinal mucosal permeability in CUMS rats.

Objective: To investigate the barrier membrane fixation performance and enhanced guided bone regeneration (GBR) capability of a thermosensitive adhesive containing bioactive glass nanoparticles in order to provide a novel solution for membrane fixation during GBR procedures. Methods: M2NP@BGN (methoxyethyl acrylate-co-N-isopropylacrylamide-co-protocatechuic acid@Bioactive glass nanoparticle), a thermosensitive adhesive, was synthesized via free radical polymerization by compositing methoxyethyl acrylate, N-isopropylacrylamide, and protocatechuic acid into a basic adhesive that was modified with bioactive glass nanoparticle (BGN). The successful fabrication of basic adhesive M2NP was characterized by attenuated total reflection-Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The thermosensitive adhesive M2NP@BGN (BGN concentration of 1 mg/mL) was characterized by scanning electron microscopy and a rheometer. By adjusting the BGN concentration (0.1 mg/mL, 0.5 mg/mL, 1 mg/mL, and 2 mg/mL), the adhesive and mechanical strengths were investigated with a universal testing machine. Biocompatibility was evaluated with a cell counting kit-8 assay and hemolysis test to identify the optimal formulation. The optimal material’s extract was co-cultured with mouse bone marrow mesenchymal stem cells, and its osteogenic activity was examined in vitro by quantitative real-time PCR, alkaline phosphatase, and alizarin red S staining. The rat mandibular defect model was established, filled with bone graft, and divided into 3 groups based on membrane fixation method: M2NP@BGN (BGN concentration of 1 mg/mL) fixation group (M2NP@BGN), titanium nail fixation group (Nail), and unfixed control group (Negative). Bone regeneration was analyzed after 8 weeks by micro computed tomography and histological staining. Results: M2NP@BGN (BGN concentration of 1 mg/mL) was successfully synthesized and demonstrated rapid gelation under warm, humid conditions. The adhesive with a BGN concentration of 1 mg/mL exhibited the highest adhesive strength (P < 0.001) and significantly enhanced mechanical strength (P < 0.001) under 37℃ wet conditions. All formulations showed excellent biocompatibility, with cell viability > 80% and hemolysis ratio < 5%. M2NP@BGN (BGN concentration of 1 mg/mL) significantly upregulated the expression of Runx2 and Col I (P < 0.001) and enhanced the activity of osteogenic differentiation markers (P < 0.05). In the animal model, the M2NP@BGN group (BGN concentration of 1 mg/mL) achieved significantly higher bone volume fraction and better bone maturity compared to the negative and nail groups (P < 0.05). Conclusion M2NP@BGN (BGN concentration of 1 mg/mL) combines excellent wet adhesion with potent osteogenic activity, enhances the bone augmentation efficacy of membranes, and presents a novel fixation strategy with significant clinical translation potential for GBR therapy.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND:Gradient artificial bone repair scaffolds can mimic unique anatomical features in musculoskeletal tissues,showing great potential for repairing injured musculoskeletal tissues. OBJECTIVE:To review the latest research advances in gradient artificial bone repair scaffolds for tissue engineering in the musculoskeletal system and describe their advantages and fabrication strategies. METHODS:The first author of the article searched the Web of Science and PubMed databases for articles published from 2000 to 2023 with search terms"gradient,bone regeneration,scaffold".Finally,76 papers were analyzed and summarized after the screening. RESULTS AND CONCLUSION:(1)As an important means of efficient and high-quality repair of skeletal system tissues,gradient artificial bone repair scaffolds are currently designed bionically for the natural gradient characteristics of bone tissue,bone-cartilage,and tendon-bone tissue.These scaffolds can mimic the extracellular matrix of native tissues to a certain extent in terms of structure and composition,thus promoting cell adhesion,migration,proliferation,differentiation,and regenerative recovery of damaged tissues to their native state.(2)Advanced manufacturing technology provides more possibilities for gradient artificial bone repair scaffold preparation:Gradient electrospun fiber scaffolds constructed by spatially differentiated fiber arrangement and loading of biologically active substances have been developed;gradient 3D printed scaffolds fabricated by layered stacking,graded porosity,and bio-3D printing technology;gradient hydrogel scaffolds fabricated by in-situ layered injections,simple layer-by-layer stacking,and freeze-drying method;and in addition,there are also scaffolds made by other modalities or multi-method coupling.These scaffolds have demonstrated good biocompatibility in vitro experiments,were able to accelerate tissue regeneration in small animal tests,and were observed to have significantly improved histological structure.(3)The currently developed gradient artificial bone repair scaffolds have problems such as mismatch of gradient scales,unclear material-tissue interactions,and side effects caused by degradation products,which need to be further optimized by combining the strengths of related disciplines and clinical needs in the future.

Objective To examine the safety, efficacy and durability of totally endoscopic minimally invasive (TEMI) mitral valve repair in Barlow’s disease (BD). Methods A retrospective study was performed on patients who underwent mitral valve repair for BD from January 2010 to June 2021 in the Guangdong Provincial People’s Hospital. The patients were divided into a MS group and a TEMI group according to the surgery approaches. A comparison of the clinical data between the two groups was conducted. Results A total of 196 patients were enrolled, including 133 males and 63 females aged (43.8±14.9) years. There were 103 patients in the MS group and 93 patients in the TEMI group. No hospital death was observed. There was a higher percentage of artificial chordae implantation in the TEMI group compared to the MS group (P=0.020), but there was no statistical difference between the two groups in the other repair techniques (P>0.05). Although the total operation time between the two groups was not statistically different (P=0.265), the TEMI group had longer cardiopulmonary bypass time (P<0.001) and aortic clamp time (P<0.001), and shorter mechanical ventilation time (P<0.001) and postoperative hospitalization time (P<0.001). No statistical difference between the two groups in the adverse perioperative complications (P>0.05). The follow-up rate was 94.2% (180/191) with a mean time of 0.2-12.4 (4.0±2.4) years. Two patients in the MS group died with non-cardiac reasons during the follow-up period. The 3-year, 5-year and 10-year overall survival rates of all patients were 100.0%, 99.2%, 99.2%, respectively. Compared with the MS group, there was no statistical difference in the survival rate, recurrence rate of mitral regurgitation, reoperation rate of mitral valve or adverse cardiovascular and cerebrovascular events in the TEMI group (P＞0.05). Conclusion TEMI approach is a safe, feasible and effective approach for BD with a satisfying long-term efficacy.

POEMS syndrome is a rare condition associated with plasma cell disorders， and it often involves multiple systems and has diverse clinical manifestations. This article reports two cases of POEMS syndrome with hepatosplenomegaly as the initial manifestation. During the course of the disease， the patients presented with lower limb weakness， hepatosplenomegaly， lymph node enlargement， ascites， hypothyroidism， positive M protein， and skin hyperpigmentation， and ¹⁸F-FDG PET-CT imaging revealed bone lesions mainly characterized by osteolytic changes and plasma cell tumors. There was an increase in the serum level of vascular endothelial growth factor. The patients were finally diagnosed with POEMS syndrome， and the symptoms were relieved after immunomodulatory treatment.

Alzheimer’s disease (AD) is a central neurodegenerative disease characterized by progressive cognitive decline and memory impairment in clinical. Currently, there are no effective treatments for AD. In recent years, a variety of therapeutic approaches from different perspectives have been explored to treat AD. Although the drug therapies targeted at the clearance of amyloid β-protein (Aβ) had made a breakthrough in clinical trials, there were associated with adverse events. Neuroinflammation plays a crucial role in the onset and progression of AD. Continuous neuroinflammatory was considered to be the third major pathological feature of AD, which could promote the formation of extracellular amyloid plaques and intracellular neurofibrillary tangles. At the same time, these toxic substances could accelerate the development of neuroinflammation, form a vicious cycle, and exacerbate disease progression. Reducing neuroinflammation could break the feedback loop pattern between neuroinflammation, Aβ plaque deposition and Tau tangles, which might be an effective therapeutic strategy for treating AD. Traditional Chinese herbs such as Polygonum multiflorum and Curcuma were utilized in the treatment of AD due to their ability to mitigate neuroinflammation. Non-steroidal anti-inflammatory drugs such as ibuprofen and indomethacin had been shown to reduce the level of inflammasomes in the body, and taking these drugs was associated with a low incidence of AD. Biosynthetic nanomaterials loaded with oxytocin were demonstrated to have the capability to anti-inflammatory and penetrate the blood-brain barrier effectively, and they played an anti-inflammatory role via sustained-releasing oxytocin in the brain. Transplantation of mesenchymal stem cells could reduce neuroinflammation and inhibit the activation of microglia. The secretion of mesenchymal stem cells could not only improve neuroinflammation, but also exert a multi-target comprehensive therapeutic effect, making it potentially more suitable for the treatment of AD. Enhancing the level of TREM2 in microglial cells using gene editing technologies, or application of TREM2 antibodies such as Ab-T1, hT2AB could improve microglial cell function and reduce the level of neuroinflammation, which might be a potential treatment for AD. Probiotic therapy, fecal flora transplantation, antibiotic therapy, and dietary intervention could reshape the composition of the gut microbiota and alleviate neuroinflammation through the gut-brain axis. However, the drugs of sodium oligomannose remain controversial. Both exercise intervention and electromagnetic intervention had the potential to attenuate neuroinflammation, thereby delaying AD process. This article focuses on the role of drug therapy, gene therapy, stem cell therapy, gut microbiota therapy, exercise intervention, and brain stimulation in improving neuroinflammation in recent years, aiming to provide a novel insight for the treatment of AD by intervening neuroinflammation in the future.

Background At present, the treatment of silicosis is still limited, and no method is available to cure the disease. miRNAs are involved in the process of fibrosis at the transcriptional level by directly degrading target gene mRNA or inhibiting its translation. However, how miR-130a-3p regulates silicosis fibrosis has not been fully elucidated yet. Objective To investigate whether miR-130a-3p promotes epithelial-mesenchymal transition (EMT) by inhibiting peroxisome proliferators-activated receptors gamma (PPAR-γ), thereby pro-moting the process of silicotic fibrosis. To identify effective new targets for the treatment of silicotic fibrosis. Methods (1) Animal experiments: C57BL/6J mice were intratracheally injected with a one-time dose of 10 mg silica suspension (dissolved in 100 μL saline) as positive lung exposure. A silicosis model group was established 28 d after the exposure. A control group was injected with the same amount of normal saline into the trachea. Hematoxylin-eosin staining and Sirius red staining were used to observe the pathological changes and collagen deposition in lung tissues respectively. Realtime fluorescence-based quantitative polymerase chain reaction (RT-qPCR) was used to assay the expression of miR-130a-3p and PPAR-γ mRNA in lung tissues. Western blotting was used to detect the protein expression of PPAR-γ, transforming growth factor (TGF)-β1, E-cadherin, α-smooth muscle actin (α-SMA), and Collagen Ⅰ in lung tissues. (2) Cells experiments: Mouse lung epithelial cells (MLE-12) were induced with 5 µg·L⁻¹ TGF-β1 for different time (0, 12, 24, 48 h). RT-qPCR was used to detect the expression of miR-130a-3p and PPAR-γ mRNA in cells. The binding relationship between miR-130a-3p and PPAR-γ mRNA was verified by dual luciferase reporter gene assay. MLE-12 cells were stimulated by 5 µg·L⁻¹ TGF-β1 after transfection of miR-130a-3p inhibitor, and Western blotting was used to measure the protein expression of PPAR-γ, E-cadherin, and α-SMA in the TGF-β1-induced cells. Results In the silicosis model group, the alveolar septum was widened and the pulmonary nodules were formed. The Sirius red staining collagen deposition in pulmonary nodules indicated that a silicosis fibrosis model was successfully established. The expressions of TGF-β1, α-SMA, and Collagen Ⅰ proteins were increased, and the expressions of E-cadherin and PPAR-γ proteins were decreased in lung tissues of the silicosis group, compared with the control group (P<0.05 or P<0.01). The expression of miR-130a-3p was increased and the expression of PPAR-γ mRNA was decreased in lung tissues of the silicosis model (P<0.01). The expression of miR-130a-3p was significantly increased, while the expression of PPAR-γ mRNA was decreased in the TGF-β1 induced MLE-12 cells (P<0.05 or P<0.01). The dual luciferase reporter assay showed a direct relationship between miR-130a-3p and PPAR-γ mRNA in MLE-12 cells. The transfection of miR-130a-3p inhibitor in the TGF-β1 induced MLE-12 cells inhibited the decrease of PPAR-γ and E-cadherin proteins, and the increase of α-SMA protein in the MLE-12 cells induced by TGF-β1 (P<0.05 or P<0.01). Conclusion miR-130a-3p promotes the development of silicosis fibrosis by targeting PPAR-γ to increase pulmonary EMT.

Background Metals and metalloids in fine particulate matter (PM_2.5) may cause damage to the respiratory and circulatory systems of the human body, and long-term exposure is prone to causing chronic poisoning, cancer, and other adverse effects. Objective To assess the distribution characteristics of metals and metalloids in outdoor PM_2.5 in a southern city of China, conduct source apportionment, and evaluate the associated health risks, thereby providing theoretical support for further pollution control measures. Methods PM_2.5 samples were collected in districts A, B, and C of a southern China city, and the concentrations of 17 metals and metalloids were detected by inductively coupled plasma-mass spectrometry (ICP-MS). Pollution sources were assessed through enrichment factor and principal components analysis, and the main pollution sources were quantified using absolute principal component scores-multivariate linear regression (APCS-MLR). Health risks were evaluated based on the Technical guide for environmental health risk assessment of chemical exposure (WS/T777—2021). Results The ambient air PM_2.5 concentrations in the city were higher in winter and spring, and lower in summer and autumn. The annual average concentrations of ambient PM_2.5 in districts A, B, and C were 36.7, 31.9, and 24.4 μg·m⁻³, respectively. The ambient PM_2.5 levels in districts B and C were below the second-grade limit set by the Ambient air quality standards (GB 3095—2012). The enrichment factors of cadmium (Cd), aluminum (Al), and antimony (Sb) were greater than 10, those of copper (Cu), lead (Pb), arsenic (As), nickel (Ni), mercury (Hg), and molybdenum (Mo) fell between 1 and 10, and those of manganese (Mn), vanadium (V), chromium (Cr), cobalt (Co), barium (Ba), beryllium (Be), and uranium (U) were below or equal to 1. The comprehensive evaluation of source analysis showed that the main pollution sources in districts A and C and the whole city were coal-burning. In district B, the main pollution source was also coal combustion, followed by industrial process sources and dust sources. The carcinogenic risks of As and Cr were between 1×10⁻⁶ and 1×10⁻⁴. However, the hazard quotients for 15 metals and metalloids in terms of non-carcinogenic risk were below 1. Conclusion Cr and As in the atmospheric PM_2.5 of the city present a certain risk of cancer and should be paid attention to. In addition, preventive control measures should be taken against relevant pollution sources such as industrial emission, dust, and coal burning.