Objective To explore the valve regurgitation status of left heart after the implantation of left ventricular assist device (LVAD) and its effect on prognosis of patients with LVAD implantation. Methods A total of 35 patients with cardiomyopathy who underwent magnetic levitation LVAD implantation at Zhongshan Hospital, Fudan University from February 2021 to July 2024 were retrospectively selected. Clinical data during hospitalization were collected, including preoperative basic data and postoperative valve regurgitation status. Telephone follow-ups were conducted to monitor patients’ survival status and transthoracic echocardiography was used to assess left valve function. Kaplan-Meier survival curves and log-rank test were employed to compare the survival rate of patients with different levels of valve regurgitation. Results The 35 patients had a mean age of (53.9±11.1) years, with 85.7% male, and 3 patients (8.6%) died during hospitalization. Preoperatively, 17 patients (48.6%) had moderate or greater mitral regurgitation, while all 35 patients had less than moderate aortic regurgitation. One month postoperatively, thirty patients were followed up, among which 24 patients (80%) had less than moderate mitral regurgitation, including 11 cases with alleviated regurgitation compared to pre-surgery; 6 patients (20%) had moderate or greater mitral regurgitation, including 4 cases with stable regurgitation and 2 cases with progression of regurgitation compared to pre-surgery; 2 patients (6.7%) had progression of aortic regurgitation to moderate or greater. The follow-up time was 1.2 (1.0, 2.1) years, with 1-year survival rate of 91.4% and 3-year survival rate of 71.1%. Survival analysis showed that the 3-year survival rate of patients with moderate or greater mitral regurgitation one month postoperatively was significantly lower than that of patients with less than moderate regurgitation (66.7% vs 83.3%, P＝0.046). Conclusions After the implantation of magnetic levitation LVAD, most patients showed improvement in mitral regurgitation, while aortic regurgitation remained unchanged. The degree of mitral regurgitation one month postoperatively is associated with prognosis.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Forsythia suspensa is a traditional Chinese medicine and a commonly used landscaping plant. Its dried fruit is used in medicine for its functions of clearing heat, removing toxins, reducing swelling, dissipating masses, and dispersing wind and heat. It possesses extremely high medicinal and economic value. However, the genetic differentiation and diversity of its wild populations remain unclear. In this study, chloroplast genome sequences were obtained from 15 wild individuals of F. suspensa using high-throughput sequencing technology. The sequence characteristics and intraspecific variations were analyzed. The results were as follows:(1) The full length of the F. suspensa chloroplast genome ranged from 156 184 to 156 479 bp, comprising a large single-copy region, a small single-copy region, and two inverted repeat regions. The chloroplast genome encoded a total of 132 genes, including 87 protein-coding genes, 37 tRNA genes, and 8 rRNA genes.(2) A total of 166-174 SSR loci, 792 SNV loci, and 63 InDel loci were identified in the F. suspensa chloroplast genome, indicating considerable genetic variation among individuals.(3) Population structure analysis revealed that F. suspensa could be divided into five or six groups. Both the population structure analysis and phylogenetic reconstruction results indicated significant genetic variation within the wild populations of F. suspensa, with no obvious correlation between intraspecific genetic differentiation and geographical distribution. This study provides new insights into the genetic diversity and differentiation within F. suspensa species and offers additional references for the conservation of species diversity and the utilization of germplasm resources in wild F. suspensa.
Genome, Chloroplast ; Forsythia/classification* ; Phylogeny ; Genetic Variation ; Chloroplasts/genetics* ; Microsatellite Repeats

The quality of traditional Chinese medicine(TCM) is a critical foundation for ensuring the stability of its efficacy, as well as the safety and effectiveness of its clinical use. The identification of critical quality attributes(CQAs) is one of the core components of TCM preparation quality control. This study focuses on Jianwei Xiaoshi Tablets and explores their CQAs related to property and flavor from the perspective of taste receptor proteins. Three taste receptor proteins, T1R2, T1R3, and TRPV1, were selected, and a biosensor based on high-electron-mobility transistor(HEMT) was constructed to detect the interactions between Jianwei Xiaoshi Tablets and taste receptor proteins. Simultaneously, liquid chromatography-mass spectrometry(LC-MS) technology was used to analyze the chemical composition of Jianwei Xiaoshi Tablets. In examining the interaction strength, the results indicated that the interaction between Jianwei Xiaoshi Tablets and TRPV1 protein was the strongest, followed by T1R3, with the interaction with T1R2 being relatively weaker. By combining biosensing technology with LC-MS, 16 chemical components were identified from Jianwei Xiaoshi Tablets, among which six were selected as CQAs for sweetness and seven for pungency. Further validation experiments demonstrated that CQAs such as hesperidin and hesperetin had strong interactions with their corresponding taste receptor proteins. Through the combined use of multiple technological approaches, this study successfully determined the property and flavor-related CQAs of Jianwei Xiaoshi Tablets. It provides novel ideas and approach for the identification of CQAs in TCM preparations and offers comprehensive theoretical support for TCM quality control, contributing to the improvement and development of TCM preparation quality control systems.
Drugs, Chinese Herbal/chemistry* ; Biosensing Techniques/methods* ; TRPV Cation Channels/chemistry* ; Tablets/chemistry* ; Receptors, G-Protein-Coupled/genetics* ; Quality Control ; Taste ; Humans ; Mass Spectrometry

This study aims to explore the specific mechanism by which puerarin inhibits ferroptosis and improves the myocardial contractile function in myocardial hypertrophy through the nuclear factor erythroid 2-related factor 2(Nrf2)/antioxidant response element(ARE)/heme oxygenase-1(HO-1) signaling pathway. The hypertrophic cardiomyocyte model was established using phenylephrine, and H9c2 cells were divided into control group, model group, puerarin group, and puerarin+ML385 group. Cell viability and surface area were detected by cell counting kit-8(CCK-8) and immunofluorescence experiments. The mitochondrial membrane potential and Ca~(2+) concentration were measured. The ferroptosis-related indicators were detected by biochemical and fluorescence staining methods. The expression of proteins related to ferroptosis and the Nrf2/ARE/HO-1 signaling pathway was detected by Western blot. A myocardial hypertrophy model was established, and 40 rats were randomly divided into sham group, model group, puerarin group, and puerarin+Nrf2 inhibitor(ML385) group, with 10 rats in each group. Echocardiogram, hemodynamic parameters, and myocardial hypertrophy parameters were measured. Histopathological changes of myocardial tissues were observed by hematoxylin and eosin(HE) staining and Masson staining. Biochemical methods, enzyme-linked immunosorbent assay(ELISA), and fluorescence staining were used to detect inflammatory factors and ferroptosis-related indicators. Immunohistochemistry was used to detect the expression of proteins related to ferroptosis and the Nrf2/ARE/HO-1 signaling pathway. Cell experiments showed that puerarin intervention significantly enhanced the viability of hypertrophic cardiomyocytes, reduced their surface area, and restored mitochondrial membrane potential and Ca~(2+) homeostasis. Mechanism studies revealed that puerarin promoted Nrf2 nuclear translocation, upregulated the expression of HO-1, solute carrier family 7 member 11(SLC7A11), and glutathione peroxidase 4(GPX4), and decreased malondialdehyde(MDA), reactive oxygen species(ROS), and iron levels. These protective effects were reversed by ML385. In animal experiments, puerarin improved cardiac function in rats with myocardial hypertrophy, alleviated myocardial hypertrophy and fibrosis, inhibited inflammatory responses and ferroptosis, and promoted nuclear Nrf2 translocation and HO-1 expression. However, combined intervention with ML385 led to deterioration of hemodynamics and a rebound in ferroptosis marker levels. In conclusion, puerarin may inhibit cardiomyocyte ferroptosis through the Nrf2/ARE/HO-1 signaling pathway, thereby improving myocardial contractile function in myocardial hypertrophy.
Animals ; NF-E2-Related Factor 2/genetics* ; Rats ; Ferroptosis/drug effects* ; Signal Transduction/drug effects* ; Isoflavones/pharmacology* ; Male ; Rats, Sprague-Dawley ; Cardiomegaly/genetics* ; Myocytes, Cardiac/metabolism* ; Antioxidant Response Elements/drug effects* ; Myocardial Contraction/drug effects* ; Heme Oxygenase-1/genetics* ; Cell Line

OBJECTIVE: To explore the effectiveness of limb shortening/re-lengthening technique combined with in situ tissue regeneration technique in limb salvage for patients with complex lower limb fractures and soft tissue defects. METHODS: Between January 2021 and December 2024, 12 patients with complex lower limb fractures and soft tissue defects caused by trauma were admitted. There were 10 males and 2 females; the age ranged from 18 to 46 years, with an average of 36 years. Among them, 1 case of open comminuted tibiofibular fracture caused bone necrosis and soft tissue infection; 4 cases of open tibiofibular fractures developed bone and soft tissue infections after being fixed with a combined external fixator, resulting in defects; 7 cases of closed tibial fractures that underwent internal fixation developed soft tissue infections, leading to bone and soft tissue necrosis. The time from injury to the formation of bone and soft tissue defects was 2-9 weeks, with an average of 6 weeks. The length of bone defects was 5.0-10.2 cm, with an average of 6.8 cm; the area of soft tissue defects was 32-54 cm ², with an average of 43.9 cm ². After admission, all patients underwent thorough debridement. The limb shortening treatment was performed after the wound had filled with fresh granulation tissue, and an Ilizarov ring-shaped external fixator was placed or replaced. The limb was shortened at a rate of 1 mm/day to reduce bone defects. At the same time, the soft tissue defects were repaired using the in situ tissue regeneration technique. After the wound healed, osteotomy was performed, and limb lengthening was carried out at a rate of 1 mm/day. The lower limb full-length X-ray films were taken, and the lengthening was stopped when the lower limb alignment was restored. The healing condition of the wound was observed and the healing time was recorded. RESULTS: One patient died due to a traffic accident during limb lengthening. The remaining 11 patients completed limb shortening and re-lengthening treatment and were followed up 18-36 months, with an average of 20 months. All 11 patients successfully preserved their limbs. The wound healing time was 4-12 weeks, with an average of 8 weeks; the limb shortening time was 4-8 weeks, with an average of 6 weeks; and the limb lengthening time was 4-12 weeks, with an average of 8 weeks. One patient experienced delayed bone mineralization during bone lengthening, and one had pin tract infection. Both were treated symptomatically. The lower limb mechanical axis of all 11 patients was restored, and they were able to walk independently. CONCLUSION The application of limb shortening/re-lengthening technique combined with in situ tissue regeneration technique in the treatment of large bone and soft tissue defects not only effectively avoids the occurrence of nonunion at the apposition ends and increases the stability of the lower limb, but also significantly shortens the wound healing time, avoids the risk of soft tissue infection and increases the limb salvage rate. It can be used as a treatment technique for patients with complex lower limb fractures combined with soft tissue defects.
Humans ; Adult ; Male ; Female ; Middle Aged ; Soft Tissue Injuries/surgery* ; Limb Salvage/methods* ; Adolescent ; Young Adult ; Bone Lengthening/methods* ; External Fixators ; Lower Extremity/surgery* ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Tibial Fractures/surgery* ; Treatment Outcome ; Regeneration

OBJECITVE: To investigate the effectiveness of three-dimensional (3D) printing-assisted vascularized fibular graft for repairing metatarsal defects. METHODS: Between November 2021 and February 2024, 11 patients with varying degrees of metatarsal defects caused by trauma were treated. There were 10 males and 1 female, aged 22-67 years, with a mean age of 51.2 years. The defect locations were as follows: the first metatarsal in 4 cases, the fifth metatarsal in 2 cases, the first and the second metatarsals in 1 case, the first to third metatarsals in 1 case, the third and the fourth metatarsals in 1 case, the third to fifth metatarsals in 1 case, and the first to fifth metatarsals in 1 case. The preoperative American Orthopaedic Foot & Ankle Society (AOFAS) score was 67.0 (48.5, 72.5). Based on 3D-printed bilateral feet models and mirrored healthy-side foot arch angles for preoperative planning and design, the vascularized fibular graft was performed to repair the metatarsal defects. At last follow-up, the medial and lateral longitudinal arches of bilateral feet were measured on weight-bearing X-ray films, and functional assessment was conducted using the AOFAS score. RESULTS: All operations were successfully completed, with an operation time ranging from 180 to 465 minutes (mean, 246.8 minutes). All incisions healed by first intention, with no occurrence of osteomyelitis. All patients were followed up 6-22 months (mean, 10 months). X-ray film reviews showed bone graft healing in all cases, with a healing time of 3-6 months (mean, 5 months). All patients underwent internal fixator removal at 6-12 months after operation. At last follow-up, no significant difference was observed in the medial and lateral longitudinal arches between the healthy and affected feet ( P>0.05). The AOFAS score of the affected foot was 78.0 (73.5, 84.0), showing a significant improvement compared to the preoperative score ( P<0.05). The effectiveness was rated as excellent in 1 case, good in 7 cases, fair in 2 cases, and poor in 1 case. Linear scarring remained at the donor site, with no functional impairment in adjacent joint movement. CONCLUSION 3D printing-assisted vascularized fibular graft for repairing metatarsal defects can effectively restore the physiological angle of the foot arch, facilitate the recovery of weight-bearing alignment, promote good bone healing, and yield satisfactory clinical outcomes.
Humans ; Printing, Three-Dimensional ; Middle Aged ; Male ; Fibula/blood supply* ; Female ; Metatarsal Bones/injuries* ; Adult ; Bone Transplantation/methods* ; Aged ; Plastic Surgery Procedures/methods* ; Young Adult ; Treatment Outcome

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

Cervical spine health issues not only seriously affect patients' quality of life but also impose a heavy burden on the social healthcare system. Existing guidelines lack sufficient clinical guidance on lifestyle and work habits, such as exercise, posture, daily routine, and diet, making it difficult to meet practical needs. To address this, relying on the China Association of Chinese Medicine, Wangjing Hospital of China Academy of Chinese Medical Sciences took the lead and joined hands with more than ten institutions to form a multidisciplinary guideline development group. For the first time, the group developed the Guidelines for Cervical Spine Health Intervention based on evidence-based medicine methods, strictly following the standardized procedures outlined in the World Health Organization Handbook for Guideline Development and the Guiding Principles for the Formulation/Revision of Clinical Practice Guidelines in China (2022 Edition). This proposal systematically explains the methods and steps for developing the guideline, aiming to make the guideline development process scientific, standardized, and transparent.
Humans ; Practice Guidelines as Topic/standards* ; Cervical Vertebrae ; China

Objective This study aims to investigate the expression, phenotypic changes, and mechanisms of action of guanylate-binding protein 2 (GBP2) in the process of silica-induced pulmonary fibrosis. Methods The expression and localization of GBP2 in silicotic lung tissue were detected by immunohistochemical staining and immunofluorescence. An in vitro cell model was constructed, and methods such as Western blot and real-time quantitative reverse transcription polymerasechain reaction were utilized to investigate the function of GBP2 in different cell lines following silica stimulation. The mechanism of action of GBP2 in various cell lines was elucidated using Western blot analysis. Results GBP2 was highly expressed in the lung tissue of patients with silicosis. Immunohistochemical staining and immunofluorescence have revealed that GBP2 was localized in macrophages and epithelial cells. In vitro cell experiments demonstrated that silicon dioxide stimulated THP-1 cells to activate the c-Jun pathway through GBP2, promoting the secretion of inflammatory factors and facilitating the occurrence of M2 macrophage polarization. In epithelial cells, GBP2 promoted the occurrence of epithelial to mesenchymal transition (EMT) by upregulating Krueppel-like factor 8 (KLF8). Conclusion GBP2 not only activates c-Jun in macrophages to promote the production of inflammatory factors and the occurrence of M2 macrophage polarization, but also activates the transcription factor KLF8 in epithelial cells to induce EMT, collectively promoting the progression of silicosis.
Humans ; Silicosis/genetics* ; Macrophages/cytology* ; Epithelial Cells/pathology* ; GTP-Binding Proteins/physiology* ; Epithelial-Mesenchymal Transition ; Disease Progression ; Cell Line ; Male