Objective: To understand the population structure of food-borne Staphylococcus (S.) aureus in China. Methods: Whole genome sequencing was used to analyze 763 food-borne S. aureus strains from 16 provinces in China from 2006 to 2020. Multilocus sequence typing (MLST), staphylococcal protein A gene (spa) typing, and staphylococcal chromosome cassettemec (SCCmec) typing were conducted, and minimum spanning tree based on ST types (STs) was constructed by BioNumerics 7.5 software. Thirty-one S. aureus strains isolated from imported food products were also included in constructing the genome phylogenetic tree. Results: A total of 90 STs (20 novel types) and 160 spa types were detected in the 763 S. aureus isolates. The 72 STs (72/90, 80.0%) were related to 22 clone complexes. The predominant clone complexes were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, accounting for 82.44% (629/763) of the total. The STs and spa types in the predominant clone complexes changed over the years. The methicillin-resistant S. aureus (MRSA) detection rate was 7.60%, and 7 SCCmec types were identified. The ST59-t437-Ⅳa (17.24%, 10/58), ST239-t030-Ⅲ (12.07%, 7/58), ST59-t437-Ⅴb (8.62%, 5/58), ST338-t437-Ⅴb (6.90%, 4/58) and ST338-t441-Ⅴb (6.90%, 4/58) were the main types in MRSA strains. The genome phylogenetic tree had two clades, and the strains with the same CC, ST, and spa types clustered together. All CC7 methicillin sensitive S. aureus strains were included in Clade1, while 21 clone complexes and all MRSA strains were in Clade2. The MRSA strains clustered according to the SCCmec and STs. The strains from imported food products in CC398, CC7, CC30, CC12, and CC188 had far distances from Chinese strains in the tree. Conclusions: In this study, the predominant clone complexes of food-borne strains were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, which overlapped with the previously reported clone complexes of hospital and community-associated strains in China, suggesting that close attention needs to be paid to food, a vehicle of pathogen transmission in community and food poisoning.
Humans ; Staphylococcus aureus/genetics* ; Methicillin-Resistant Staphylococcus aureus/genetics* ; Multilocus Sequence Typing ; Phylogeny ; Staphylococcal Infections/epidemiology* ; China/epidemiology*

OBJECTIVE: To investigate the causes of ineffectiveness of platelet transfusion with monoclonal antibody solid phase platelet antibody test (MASPAT) matching in patients with allogeneic hematopoietic stem cell transplantation and explore the strategies of platelet transfusion. METHODS: A case of donor-specific HLA antibodies (DSA) induced by transfusion which ultimately resulted in transplantation failure and ineffective platelet transfusion with MASPAT matching was selected, and the causes of ineffective platelet transfusion and platelet transfusion strategy were retrospectively analyzed. RESULTS: The 32-year-old female patient was diagnosed as acute myeloid leukemia (high risk) in another hospital with the main symptoms of fever and leukopenia, who should be admitted for hematopoietic stem cell transplantation after remission by chemotherapy. In the course of chemotherapy, DSA was generated due to platelet transfusion, and had HLA gene loci incompatible with the donor of the first transplant, leading to the failure of the first transplant. The patient received platelet transfusion for several times before and after transplantation, and the results showed that the effective rate of MASPAT matched platelet transfusion was only 35.3%. Further analysis showed that the reason for the ineffective platelet transfusion was due to the missed detection of antibodies by MASPAT method. During the second hematopoietic stem cell transplantation, the DSA-negative donor was selected, and the matching platelets but ineffective transfusion during the primary transplantation were avoided. Finally, the patient was successfully transplanted and discharged from hospital. CONCLUSIONS DSA can cause graft failure or render the graft ineffective. For the platelet transfusion of patients with DSA, the platelet transfusion strategy with matching type only using MASPAT method will miss the detection of antibodies, resulting in invalid platelet transfusion.
Female ; Humans ; Adult ; Platelet Transfusion ; Antibodies, Monoclonal ; Retrospective Studies ; HLA Antigens ; Hematopoietic Stem Cell Transplantation

OBJECTIVE: To analyze and compare the effects of leukapheresis on hemostatic function in patients with hyperleukocytic leukemia. METHODS: A total of 139 patients with AML, ALL and CML who underwent leukapheresis from June 2009 to February 2020 and did coagulation test before and after operation were included in this study. The clearance efficiency of each group and the difference among three groups were evaluated, as well as hemostatic function including platelet counts, coagulation indicators, CDSS score and incidence of adverse events. The difference of hemostatic function caused by leukapheresis in different leukemia patients were compared. RESULTS: After leukapheresis, the WBC counts were decreased significantly in the three groups of patients (P<0.001), and the clearance efficiency was highest in ALL patients. However, the platelet counts also were decreased significantly (AML:P＜0.001, ALL: P＜0.001, CML: P＜0.01) in the three groups of patients, particularly for acute leukemia patients with a positive correlation with WBC clearance efficiency(r=0.284). After leukapheresis, fibrinogen decreased, PT and APTT prolonged. For acute leukemia patients, higher CDSS score was related to an elevated incidence of bleeding events (P<0.05). CONCLUSION Leukapheresis is an effective method to decrease the leukemic burden, but it is necessary to monitor the impact on hemostatic function. It is recommended to assess the CDSS socre for acute leukemia patients, in order to identify the predictive value for bleedings.
Acute Disease ; Blood Coagulation ; Blood Coagulation Tests ; Hemorrhage ; Hemostatics ; Humans ; Leukapheresis/methods* ; Leukemia, Myeloid, Acute/therapy*

OBJECTIVE: To establish a new method for synthesizing Lewis blood group antigens, that is, the mimotopes of Lewis blood group antigens were screened by using an alpaca phage display nanobody library. METHODS: We selected mimotopes of the Lewis a (le^a) antigen by affinity panning of an alpaca phage display nanobody library using a monoclonal anti-le^a antibody. Enzyme-linked immunosorbent assay (ELISA) was used to test the affinity of the positive clones for the monoclonal anti-le^a antibody, and the high-affinity positive clones were selected for sequencing and synthesis. Finally, the sensitivity, specificity and reactivity of the synthesized le^a mimotope in clinical samples were verified by ELISA. RESULTS: A total of 96 phage clones were randomly selected, and 24 were positive. Fourteen positive clones with the highest affinity were selected for sequencing. The result showed that there were 5 different sequences, among which 3 sequences with the highest frequency, largest difference and highest affinity were selected for expression and synthesis. The sensitivity and specificity of le^a mimic antigen by ELISA showed that, the minimum detection limit of gel microcolumn assay (GMA) and ELISA method were 25 times different, and the le^a mimic antigen had no cross reacted with the other five unrelated monoclonal antibodies(P<0.001). Finally, 30 clinical plasma samples were analyzed. The mean absorbance of the 15 positive plasma samples was significantly higher than that of the 15 negative plasma samples (P=0.02). However, the positive signal values of the clinical samples were much lower than those of the monoclonal antibodies. CONCLUSION A new method of screening le^a mimic antigen by using alpaca phage nanoantibody library has been established, which is expected to realize the screening of le^a mimotopes, thus realizing the application of high-sensitivity detection methods such as ELISA and chemiluminescence in blood group antibody identification.
Animals ; Antibodies, Monoclonal ; Antineoplastic Agents, Immunological ; Bacteriophages ; Blood Group Antigens ; Camelids, New World ; Enzyme-Linked Immunosorbent Assay/methods* ; Epitopes ; Humans ; Lewis Blood Group Antigens ; Peptide Library

In response to no national standard for Gynostemma pentaphyllum, a market survey was carried out, and 17 batches of gypenosides extract and 29 batches of Gypenosides Tablets on the market were collected. With gypenoside A as an index, the TLC qualitative identification and HPLC quantitative evaluation method of gypenosides extract and tablets was established. Based on the determination results of 17 batches of gypenosides extract and 29 batches of Gypenosides Tablets, the quality standards of gypenosides extract and tablets were formulated respectively, so as to give suggestions for improving the quality standards of gypenosides extract and tablets. Compared with the existing ministerial standards, the qualitative identification and quantitative detection of specific components were added, in order to provide scientific basis and suggestions for the revision of the quality standard of gypenosides extract and tablet preparation.
Gynostemma ; Plant Extracts ; Reference Standards ; Tablets

To study the relation between drug release and the drug status within curcumin-loaded microsphere, SPG (shirasu porous glass) membrane emulsification was used to prepare the curcumin-PLGA (polylactic-co-glycolic acid) microspheres with three levels of drug loading respectively, and the in vitro release was studied with high-performance liquid chromatography (HPLC). The morphology of microspheres was observed with scanning electron microscopy (SEM), and the drug status was studied with X-ray diffraction (XRD), differential scanning calorimetry (DSC) and infrared analysis (IR). The drug loading of microspheres was (5.85 ± 0.21)%, (11.71 ± 0.39)%, (15.41 ± 0.40)%, respectively. No chemical connection was found between curcumin and PLGA. According to the results of XRD, curcumin dispersed in PLGA as amorphous form within the microspheres of the lowest drug loading, while (2.12 ± 0.64)% and (5.66 ± 0.07)% curcumin crystals was detected in the other two kinds of microspheres, respectively, indicating that the drug status was different within three kinds of microspheres. In the data analysis, we found that PLGA had a limited capacity of dissolving curcumin. When the drug loading exceeded the limit, the excess curcumin would exist in the form of crystals in microspheres independently. Meanwhile, this factor contributes to the difference in drug release behavior of the three groups of microspheres.
Calorimetry, Differential Scanning ; Curcumin ; chemistry ; Drug Liberation ; Lactic Acid ; Microscopy, Electron, Scanning ; Microspheres ; Polyglycolic Acid ; X-Ray Diffraction

To study the relation between drug release and the drug status within curcumin-loaded microsphere, SPG (shirasu porous glass) membrane emulsification was used to prepare the curcumin-PLGA (polylactic-co-glycolic acid) microspheres with three levels of drug loading respectively, and the in vitro release was studied with high-performance liquid chromatography (HPLC). The morphology of microspheres was observed with scanning electron microscopy (SEM), and the drug status was studied with X-ray diffraction (XRD), differential scanning calorimetry (DSC) and infrared analysis (IR). The drug loading of microspheres was (5.85 ± 0.21) %, (11.71 ± 0.39) %, (15.41 ± 0.40) %, respectively. No chemical connection was found between curcumin and PLGA. According to the results of XRD, curcumin dispersed in PLGA as amorphous form within the microspheres of the lowest drug loading, while (2.12 ± 0.64) % and (5.66 ± 0.07) % curcumin crystals was detected in the other two kinds of microspheres, respectively, indicating that the drug status was different within three kinds of microspheres. In the data analysis, we found that PLGA had a limited capacity of dissolving curcumin. When the drug loading exceeded the limit, the excess curcumin would exist in the form of crystals in microspheres independently. Meanwhile, this factor contributes to the difference in drug release behavior of the three groups of microspheres.

Objective To observe serum uric acid (UA) level distribution and explore risk factors of hyperuricemia (HUA) in a large cohort of active and retired employees underwent physical examination.Methods Physical examination was arranged for 21 700 active and retired employees from May 2010 to September 2011,16 416 employees were examined and complete examination data were obtained in 14 044 subjects.The distribution characteristics of UA level and correlations of UA level and HUA prevalence rate with gender,age,body mass index (BMI),systolic pressure (SBP),diastolic pressure (DBP),fasting blood-glucose (FPG),serum total cholesterol (TC),triglyceride (TG),low-density lipoprotein cholesterol (LDL-C),high-density lipoprotein cholesterol (HDL-C) were analyzed.Results HUA prevalence rate was 11.2％ in this cohort,which was significantly higher in males (15.8％) than in females (4.1％,P ＜ 0.05).The UA level and the HUA prevalence rate presented a “J” curve relationship with aging and positively correlated with BMI,SBP,DBP,TG,LDL-C,TC and FPG while negatively correlated with HDL-C.Multiple linear regression analysis showed that SBP,BMI,FPG,TG,and LDL-C were independent risk factors while HDL-C and female gender were the protective factors of HUA(all P ＜0.01).Aging and high DBP were independent risk factors of HUA for females (all P ＜ 0.05)and LDL-C was risk factor of HUA for males (P ＜ 0.05).Conclusions Serum UA level presents a “J” wave relationship with aging.The risk factors of HUA are increased SBP,BMI,FPG,TG,LDL-C while the protective factors of HUA are female gender and high HDL-C.

Animals ; Hydrogen Sulfide ; metabolism ; Hypertension, Portal ; metabolism ; physiopathology ; Male ; Rats ; Rats, Sprague-Dawley