Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Research integrity is the foundation for ensuring the sound and orderly development of scientific and technological innovation. As the main battlefield of clinical medical research, hospitals should effectively fulfill their main responsibilities and do a good job in research integrity management. The China Hospital Research Integrity Alliance, consisting of the first batch of 43 hospitals, was established in November 2021. With the aim of " complementary advantages, resource sharing, and collaborative development", the alliance has carried out construction practices from seven aspects: construction mode, cultural system construction, organizational management, institutional construction, publicity and education, early warning and supervision, and technological empowerment. It has achieved the overall improvement of the research integrity construction ability of member units of the alliance, organic linkage between government and medical institutions, and efficient combination of internal and external resources, which can provide reference for the research integrity construction of medical institutions in China.

Objective:To construct a scientific and technological evaluation system based on the needs of the pilot program for building a national high-quality hospital and establishing a national medical center.Methods:Xiangya Hospital of Central South University gradually improved its academic evaluation system by following the guidelines outlined in national authorities′ documents regarding "abolishing the five only" and "setting new standards", adhering to the guiding principles of "quality, contribution, efficiency, and impact" and employing the principles of "high-standard evaluation, quantitative evaluation, representative work evaluation, and third-party evaluation" .Results:The hospital established a comprehensive, scientific, and quantifiable indicator pool. These indicators were applied to various aspects of medical innovation evaluation, including awarding incentives, discipline assessment, professional promotion, personnel assessment, mentor selection for graduates, and excellence evaluation. Simultaneously, the hospital developed an intelligent platform for medical innovation evaluation and assessment in university-affiliated hospitals based on performance management theory.Conclusions:Through the construction and practice of the Xiangya technology evaluation system, the hospital further improved and optimized its academic evaluation work, guiding researchers to high-quality innovation and efficient translational research, ultimately promoting the high-quality development of the hospital.

Objective: To investigate the molecular transmission network characteristics of HIV-1 among men who have sex with men (MSM) in Shaoxing City, Zhejiang Province, so as to provide insights into AIDS prevention and control among MSM. Methods: Newly reported HIV/AIDS cases among MSM in Shaoxing City were selected from January 2021 to September 2023. Plasma samples before the antiviral treatment were collected. The HIV-1 pol gene was amplified using reverse transcription PCR and nested PCR to construct phylogenetic trees for gene subtype analysis. The HIV-TRACE method was used to construct a molecular transmission network with a genetic distance of 1.5% to analyze clustering and the characteristics of cases within molecular clusters. Results: A total of 216 HIV/AIDS cases among MSM were included, and 179 qualified sequences were obtained. The predominant HIV-1 subtypes were CRF07_BC and CRF01_AE, with 95 and 66 cases, respectively. At 1.5% genetic distance, 20 molecular clusters were formed, with 61 nodes and 58 edges. A total of 61 sequences were connected to the transmission network (34.08%). HIV/AIDS cases among MSM from all the counties (cities, districts) in Shaoxing City were included in the network. There was the largest molecular cluster with ≥10 nodes, involving 12 cases from five counties (cities, districts), 3 medium-sized molecular clusters with 4 to 5 nodes, and the 16 small-sized molecular clusters with 2 or 3 nodes. Seven cases with high risk of transmission, each with ≥4 edges, were all CRF07_BC subtypes. Among them, two cases were from the large molecular cluster, and five cases were from the same molecular cluster composed of cases from Shengzhou City and Xinchang County. Conclusions The predominant HIV-1 subtypes among MSM in Shaoxing City were CRF07_BC and CRF01_AE. There was cross-regional HIV transmission, and potential transmission risk might exist in Shengzhou City and Xinchang County.

Objective: To investigate the molecular typing and drug resistance of Salmonella in market-sold raw livestock meats in Shaoxing City, Zhejiang Province, so as to provide the basis for the prevention and control of drug-resistant Salmonella. Methods: Salmonella isolates were detected and serotyped from raw livestock meat samples collected from supermarkets, agricultural markets and restaurants in Shaoxing City between March and November 2023. Molecular typing was performed using pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). Antibiotic resistance phenotypes and resistance gene analyses were conducted using broth microdilution method and whole genome sequencing. Results: A total of 34 Salmonella isolates were detected from 329 samples and the positive rate was 10.33%. There were 14 serotypes, with S. Rissen (9 isolates, 26.47%) and S. London (8 isolates, 23.53%) being dominant. PFGE typing revealed 31 band patterns and 23 banding pattern clusters of Salmonella, and the similarity ranged from 30.80% to 100.00%, without dominant band patterns. MLST identified 15 sequence typing (ST) types, and S. Rissen were all ST469 and S. London were all ST155. Salmonella strains exhibited high levels of resistance to tetracycline (44.12%) and ampicillin (35.29%). Thirteen resistance patterns were identified, with 8 multidrug resistant patterns (29.41%). There were 8 classes of 14 resistance genes, with aminoglycoside resistance gene aac(6' )-Iaa found in 100.00% of the strains. The highest concordance rate between the resistance phenotype and gene was observed for phenicol antibiotics (97.06%), while there was no concordance between the quinolone resistance phenotype and genes. Conclusions S. Rissen and S. London are the predominant serotypes in market-sold raw livestock meats in Shaoxing City. The PFGE band types of the Salmonella isolates show polymorphism distribution, and MLST are mainly ST469 and ST155. The isolates have high levels of resistance to tetracycline and ampicillin, manifesting multidrug resistance.

Objective:By analyzing the current status of hospital scientific research contract management, identifying common problems in contract review and proposing suggestions to improve the efficiency of hospital scientific research contract management.Methods:Taking a large comprehensive tertiary hospital as an example, through interviews with professional lawyers, and analysis of problems identified in the preliminary review of a total number of 419 scientific research contracts from 2018 to 2020, further solutions are proposed.Results:Identified problems include no breach protocol of the contract, more attention should be paid to intellectual property protection clauses, supplementary signing of contracts, not include the ethics consideration and protection of genetics resources, low efficiency, time costing, and lack of information sharing among multiple departments.Conclusions:By improving the level of scientific research services, strengthening the Principle Investigator’s awareness of the significance of contract management, enhancing the legal and regulatory training, pay more attention to the protection of intellectual property rights, develop contract templates and establishing an information system to improve the management level of scientific research contracts.

Objective To analyze the imaging features of congenital spinal deformity (CSD) associated with split cord malformation (SCM) and other intraspinal abnormalities, and to investigate the relationship to neurological symptoms. Methods 105 cases CSD with SCM were retrospectively studied. Analysis the imaging features of SCM (including type of SCM, location of SCM, location and apical vertebrae, symmetry of divided cord) and other intraspinal abnormalities. To investigate the relationship of the factors and neurological symptoms using Chi?square test of one factor and multiple factors logistic regression analysis. Re?sults 28 cases (26.7%) were formation failure, 33 cases (31.4%) were segmentation failure, and 44 cases (41.9%) were combina?tion of 2 disorders. 41 cases had neurological symptoms, 64 cases were asymptomatic. The distribution of SCM combined with spi?nal deformities:thoracic (11 cases), thoracolumbar (18 cases) and lumbar (20 cases) in type I SCM, thoracic (31 cases), thoracolum?bar (20 cases) and lumbar (5 cases) in type II, none was in cervical. The location of SCM upper than apical vertebrae 29 cases, on apical vertebrae 25 cases, lower than apical vertebrae 51 cases. Spinal cord was splitted symmetric 27 cases and asymmetric 78 cases. 66 cases combined with other intraspinal abnormalities, lower conus 42 cases, syringomyelia 38 cases, meningocele 10 cas?es and sakrale zyste 5 cases. Associated with intraspinal abnormalities, the rate of neural symptoms was different. According to Chi?square test of one factor and multiple factors logistic regression analysis, lumbar SCM, spinal cord asymmetric and lower conus were related with neurological symptoms. Conclusion The predilection spinal deformity of type I is combination, type II SCM is segmentation failure. When SCM patients associated with other intraspinal abnormalities, the incidence of neurologic symptoms is increased. The lumbar SCM, hemicords asymmetry and lower lying conus have significant relationship with neurologic symptoms.

OBJECTIVETo analyze the risk factors of neurological complications of posterior vertebral column resection in the treatment of severe rigid congenital spinal deformities.

METHODSThe clinical data of 88 patients with severe rigid congenital spinal deformities who underwent PVCR in Department Of Orthopaedics, Xijing Hospital, Fourth Military Medical University from June 2007 to November 2012 were collected. There were 39 males and 49 females at the average age of 16.9 years (range 6-46 years). To measure the Cobb angle and balance at preoperative, postoperative and follow up, and to record the operation report, neurological complications and at follow up. The relevant factors of neurological complications were analyzed by one-way analysis, including: age, Cobb angle, operation time, body mass index, pulmonary function, blood volume loss, resection level, number of vertebrae fixed, number of vertebrae resected, usage of cage or titanium mesh, preoperative neurologic function, the type of deformity and combination of spinal canal deformity, and further analyzed by multiariable Logistic regression analysis.

RESULTSThe average follow up was 42 months (range 19 to 83 months). The number of resected vertebrae average 1.3 (range 1 to 3), operative time average 502.4 min (range 165.0 to 880.0 min), estimate blood loss average 2,238 ml (range 100 to 11,500 ml) for an average 69.3% blood volume loss (range 9% to 299%). The average preoperative major coronal curve of 93.6° corrected to 22.2°, at the final follow-up, the coronal curve was 22.2° with a correction of 76.8%. The average preoperative coronal imbalance (absolute value) was 2.5 cm decreasing to 1.3 cm at the final follow-up. The average preoperative major sagittal curve of 88.2° corrected to 28.7°, at the final follow-up, the sagittal curve was 29.2°, average decrease in kyphosis of 59.0°. The average preoperative sagittal imbalance (absolute value) was 3.1 cm decreasing to 1.2 cm at the final follow-up. There were 12 patients (13.6%) developed a neurological complications. High rate of neurological complications was occurred in patients with operative time greater than 480 min, pulmonary dysfunction, blood volume loss greater than 50%, T7-T99 osteotomy and preoperative neurologic compromise (P=0.046, 0.000, 0.000, 0.033, 0.043).

CONCLUSIONSPosterior vertebral column resection can achieve satisfactory efficacy in treatment of severe spinal deformities. Pulmonary dysfunction and blood volume loss greater than 50% were significant risk factors of neurological complications.

Adolescent ; Adult ; Child ; Female ; Humans ; Kyphosis ; Male ; Middle Aged ; Neurosurgical Procedures ; Orthopedic Procedures ; Osteotomy ; Retrospective Studies ; Risk Factors ; Scoliosis ; Spinal Canal ; Spinal Diseases ; surgery ; Spine ; abnormalities ; surgery ; Treatment Outcome ; Young Adult

Objective To compare differences of SRS-22 scores between male and female AIS patients.Methods From October 2007 to April 2009,298 AIS patients from 7 spine centers completed simplified Chinese edition of SRS-22 questionnaire,including 62 males and 236 females with an average age of 15.7 years old,and the average Cobb angle was 52.8°.Of 62 male patients,34 were from urban areas and 28 rural areas.Among 236 female patients,132 were from urban areas and 104 rural areas.A comparison was conducted in terms of age,Cobb angle,the ratio of urban population to rural population,and the scores of all domains and the subtotal scores of SRS-22 questionnaire between male and female patients.Results There was no difference of age,Cobb angle and the ratio of urban population to rural population between male and female patients(P＞0.05).The scores of four domains and subtotal scores of SRS-22 questionnaire were significantly higher in male patients when compared with female patients(P＜0.05).Conclusion Gender difference should be taken into the consideration when estimating the quality of life in AIS patients by SRS-22 questionnaire.The quality of life in male patients with AIS was better than that of female patients.