Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To construct a scientific and technological evaluation system based on the needs of the pilot program for building a national high-quality hospital and establishing a national medical center.Methods:Xiangya Hospital of Central South University gradually improved its academic evaluation system by following the guidelines outlined in national authorities′ documents regarding "abolishing the five only" and "setting new standards", adhering to the guiding principles of "quality, contribution, efficiency, and impact" and employing the principles of "high-standard evaluation, quantitative evaluation, representative work evaluation, and third-party evaluation" .Results:The hospital established a comprehensive, scientific, and quantifiable indicator pool. These indicators were applied to various aspects of medical innovation evaluation, including awarding incentives, discipline assessment, professional promotion, personnel assessment, mentor selection for graduates, and excellence evaluation. Simultaneously, the hospital developed an intelligent platform for medical innovation evaluation and assessment in university-affiliated hospitals based on performance management theory.Conclusions:Through the construction and practice of the Xiangya technology evaluation system, the hospital further improved and optimized its academic evaluation work, guiding researchers to high-quality innovation and efficient translational research, ultimately promoting the high-quality development of the hospital.

Objective : To investigate the clinical and molecular epidemiological characteristics of 10 patients with enterovirus (EV)-D68 infections in the respiratory tract in Shaoxing City, Zhejiang Province, so as to provide insights into formulation of control interventions for EV-D68 infections. Methods: Clinical specimens were sampled from patients with acute respiratory tract infections (ARTIs) admitted to sentinel hospitals in Shaoxing City from 2021 to 2022, and EV-D68 was detected using real-time fluorescent PCR assay and sequencing of the VP1 region of enterovirus. The epidemiological and etiological characteristics of EV-D68 infected cases were descriptively analyzed. Results: A total of 3 009 specimens were sampled from patients with ARTIs from 2021 to 2022, and the detection of EV-D68 was 0.33%. Of all EV-D68-infected patients, there were 6 men and 4 women, and 5 cases under 18 years of age, 2 cases at ages of 18 to 60 years and 3 cases at ages of over 60 years. EV-D68 infection predominantly occurred in summer (5 cases detected between May and July) and autumn (5 cases detected between September and October). The main clinical symptoms included fever (10 cases), sore throat (9 cases) and cough (8 cases), and all 10 cases recovered well, with no deaths reported. Sequencing identified D3 subtype in all 10 specimens positive for EV-D68. Conclusions The ARTIs caused by EV-D68 occurred predominantly among children under 18 years of age in Shaoxing City, and was highly prevalent in summer and autumn. D3 was the predominant enterovirus subtype.

Objective: To investigate the epidemiological characteristics of foodborne disease outbreaks in Shaoxing City, Zhejiang Province, from 2012 to 2022, so as to provide the evidence for improving the foodborne disease control strategy. Methods: Foodborne disease outbreaks in Shaoxing City from 2012 to 2022 were collected from National Foodborne Disease Outbreak Monitoring System in China, including populations, places of outbreak, pathogenic factors and suspected foods. The temporal distribution, regional distribution, distribution of outbreak places and pathogenic factors of foodborne disease outbreaks were descriptively analyzed. Results: A total of 89 foodborne disease outbreaks were reported in Shaoxing City from 2012 to 2022, covering totally 699 patients, with an average annual attack rate of 6.35%. The outbreak peaked during the period between June and October (73 outbreaks, 82.02%), and family was the predominant place of outbreak (41 outbreaks, 46.07%). There were 83 outbreaks with known pathogenic factors, including 51 outbreaks caused by microbial factors, with Vibrio parahaemolyticus, Salmonella and norovirus as predominant pathogens, and 29 outbreaks caused by fungi and their toxins, which were all poisonous mushrooms poisoning, resulting in 2 deaths. In addition, there were 3 outbreaks caused by chemical factors. Conclusions The outbreak of foodborne diseases predominantly occurred in summer and autumn in Shaoxing City from 2012 to 2022. Family was the predominant place of outbreak, and toxic mushroom poisoning was the most lethal pathogenic factor.

Objective: To investigate the genotypes of enteroviruses causing hand, foot and mouth disease ( HFMD ) in Shaoxing City, so as to provide insights into HFMD control. Methods: The anal and pharyngeal swab specimens were collected from HFMD cases under 14 years of age reported by sentinel hospitals of HFMD in Shaoxing City from 2018 to 2020. The enterovirus genotypes were determined by quantitative real-time PCR (qPCR) assay and sequenced by BLAST, and the constitution and temporal distribution of enterovirus genotypes were descriptively analyzed. Results: A total of 1 267 anal and pharyngeal swab specimens were collected from children with HFMD, and 661 specimens were positive for enteroviruses, with a positive rate of 52.17%. Among the 661 enterovirus-positive specimens, 70 specimens were tested positive for EV71 ( 5.52% ), 208 specimens tested positive for CoxA16 ( 16.42% ), 239 specimens tested positive for CoxA6 ( 18.86% ); 23 specimens tested positive for CoxA10 (1.82%), and 121 specimens tested positive for other 10 genotypes, including CoxA2, CoxA4, and CoxA5. The prevalence rates of EV71 were 14.08%, 0.72% and 1.84% from 2018 to 2020, and the detection of EV71 peaked during the period between April and July, 2018. The prevalence rates of CoxA16 were 10.98%, 26.57% and 11.98 from 2018 to 2020, and the detection of CoxA16 peaked during the period between April and August, and between November and December, 2019. The prevalence rates of CoxA6 were 10.50%, 14.73% and 30.88% from 2018 to 2020, and the detection of CoxA6 peaked during the period between May and December, 2020. Conclusions EV71, CoxA16 and CoxA6 were predominant enterovirus genotypes causing HFMD in Shaoxing City from 2018 to 2020, and the detection of CoxA6 appeared a tendency towards a rise.

Objective:To determine lysophosphatidic acid receptor 6 (LPAR6) expression in patients with mycosis fungoides (MF) , a variant of cutaneous T-cell lymphoma (CTCL) , and to investigate its role and mechanism of action in the development and prognosis of CTCL.Methods:A total of 110 patients with confirmed MF were collected from Department of Dermatology, Peking University First Hospital from 2011 to 2020, including 24 with large-cell transformation (LCT) and 25 with non-large cell transformation (NLCT) in the discovery cohort, and 24 with LCT and 37 with NLCT in the validation cohort. RNA sequencing and RT-PCR were conducted to determine the LPAR6 expression in patients in the discovery cohort and validation cohort respectively. LPAR6 expression was compared between patients with LCT and those with NLCT, and its effect on the prognosis of patients was evaluated. Two LPAR6-overexpressing CTCL cell lines MyLa and Sz4 were constructed to evaluate the effect of LPAR6 overexpression on proliferative activity of MyLa and Sz4 cells, with the cells normally expressing LPAR6 as the control group; after the treatment with LPAR6-related ligand lysophosphatidic acid (LPA) , 2S-OMPT, adenosine triphosphate (ATP) or adenosine (ADO) , the effects of LPAR6 activation on the proliferative activity and apoptosis of LPAR6-overexpressing MyLa and Sz4 cells were evaluated by the MTS method and flow cytometry respectively. Log-rank test was used for prognostic analysis, and t test or Mann-Whitney U test was used for comparisons between two groups. Results:As RNA sequencing showed, LPAR6 was one of the significantly underexpressed genes in the LCT group in the discovery cohort; in the validation cohort, LPAR6 expression (median[ Q1, Q3]) was significantly lower in the LCT group (204.90[81.90, 512.70]) than in the NLCT group (809.40[417.50, 1 829.20], U= 242.00, P= 0.002) ; in the two cohorts, the underexpression of LPAR6 was significantly associated with increased risk of poor prognosis (both P < 0.01) . Cell proliferation assay showed no significant difference in the proliferative activity of MyLa or Sz4 cells between the LPAR6 overexpression group and control group at 0, 24, 48 and 72 hours during the experiment (all P > 0.05) ; 48 hours after activation of LPAR6 by LPA, 2S-OMPT, ATP and ADO in MyLa cells, the LPAR6 overexpression group showed significantly decreased cellular proliferative activity (1.38 ± 0.01, 1.04 ± 0.01, 1.09 ± 0.03, 1.23 ± 0.01, respectively) compared the control group (1.73 ± 0.04, 1.23 ± 0.01, 1.24 ± 0.01, 1.42 ± 0.03, t= 30.33, 18.38, 4.78, 5.75, respectively, all P < 0.05) , but significantly increased cell apoptosis rate (17.93% ± 0.88%, 17.75% ± 0.35%, 23.97% ± 0.57%, 31.44% ± 0.34%, respectively) compared the control group (3.98% ± 0.03%, 7.81% ± 0.59%, 11.95% ± 0.85%, 12.02% ± 0.48%, t= 15.93, 14.49, 11.74, 33.01, respectively, all P < 0.05) ; 48 hours after activation of LPAR6 by 2S-OMPT and ADO in Sz4 cells, compared with the control group, the LPAR6 overexpression group also showed significantly decreased cellular proliferative activity (2S-OMPT: 1.29 ± 0.04 vs. 1.48 ± 0.01; ADO: 1.27 ± 0.01 vs. 1.51 ± 0.02; both P < 0.05) , but significantly increased cell apoptosis rate (2S-OMPT: 41.70% ± 0.70% vs. 29.35% ± 0.55%; ADO: 37.05% ± 0.15% vs. 24.60% ± 1.00%; both P < 0.05) . Conclusions:LPAR6 was underexpressed in the patients with LCT, and its underexpression was significantly associated with increased risk of poor prognosis. In vitro activation of LPAR6 could inhibit the proliferation of CTCL cells and promote their apoptosis, suggesting that the decrease of LPAR6 expression may be one of the important mechanisms underlying disease progression in patients with LCT.

Objective To explore the effect of single level lumbar disc herniation on the morphology and diameter of sciatic nerve,and to identify the correlation between the diameter change in sciatic nerve and severity of clinical symptoms,as well as the prognosis of surgical treatment in patients with lumbar disc herniation.Methods From January 1,2017 to December 31,2017,Seventy lumbar disc herniation (LDH) patients who underwent single-level posterior lumbar spine surgery were recruited in this retrospective analysis study.Specific data including age,gender,the level of a disc herniation,the type of disc herniation,symptomatic side,surgical procedure were recorded respectively.In addition the morphological changes and the diameter of bilateral sciatic nerve were recorded preoperatively and postoperatively by B-mode ultrasound.Furthermore,the pain in patients and neurological function were evaluated by visual analogue scale (VAS,back pain and leg pain),Japanese orthopaedic association scores-lumbar (JOA) and Oswestry disability index (ODI).The correlation between the diameter of sciatic nerve and clinical features,as well as clinical prognosis of patients were identified in the present study.Results For patients with acute lumbar disc herniation,the diameter of sciatic nerve in affected side was 5.19±1.03 ram,which is significantly higher than that in the unaffected side (4.57±0.64 mm,t=6.735,P=0.000).In addition,preoperative ratio of the affected side to the healthy side of the sciatic nerve showed strong correlation with the VAS of leg pain (r=0.838,P=0.001),JOA (r=-0.857,P=0.001),and ODI score(r=0.881,P=0.000),but not with the VAS of back pain (r=-0.061,P=0.614).Three months after surgery,the diameter of sciatic nerve in the affected side decreased to 4.58±0.63 mm (t=6.865,P=0.000),while the unaffected side showed no significant change(t=0.300,P=0.765).Clinical improvement was observed in all the patients postoperatively.The changes in the diameter of sciatic nerve postoperatively in affected side showed strong correlation to the rate of improvement in VAS of leg (r=0.624,P=0.003),JOA(r=0.615,P=0.003) and ODI scores (r=0.722,P=0.002),but not to the rate of improvement in VAS of back (r=-0.025,P=0.836).Conclusion Single root compression in patients with single level disc herniation might cause morphological changes such as thickening and edema in sciatic nerve,which were closely related to the severity of clinical symptoms and the prognosis of surgical treatment.

Objective To analyze the imaging features of congenital spinal deformity (CSD) associated with split cord malformation (SCM) and other intraspinal abnormalities, and to investigate the relationship to neurological symptoms. Methods 105 cases CSD with SCM were retrospectively studied. Analysis the imaging features of SCM (including type of SCM, location of SCM, location and apical vertebrae, symmetry of divided cord) and other intraspinal abnormalities. To investigate the relationship of the factors and neurological symptoms using Chi?square test of one factor and multiple factors logistic regression analysis. Re?sults 28 cases (26.7%) were formation failure, 33 cases (31.4%) were segmentation failure, and 44 cases (41.9%) were combina?tion of 2 disorders. 41 cases had neurological symptoms, 64 cases were asymptomatic. The distribution of SCM combined with spi?nal deformities:thoracic (11 cases), thoracolumbar (18 cases) and lumbar (20 cases) in type I SCM, thoracic (31 cases), thoracolum?bar (20 cases) and lumbar (5 cases) in type II, none was in cervical. The location of SCM upper than apical vertebrae 29 cases, on apical vertebrae 25 cases, lower than apical vertebrae 51 cases. Spinal cord was splitted symmetric 27 cases and asymmetric 78 cases. 66 cases combined with other intraspinal abnormalities, lower conus 42 cases, syringomyelia 38 cases, meningocele 10 cas?es and sakrale zyste 5 cases. Associated with intraspinal abnormalities, the rate of neural symptoms was different. According to Chi?square test of one factor and multiple factors logistic regression analysis, lumbar SCM, spinal cord asymmetric and lower conus were related with neurological symptoms. Conclusion The predilection spinal deformity of type I is combination, type II SCM is segmentation failure. When SCM patients associated with other intraspinal abnormalities, the incidence of neurologic symptoms is increased. The lumbar SCM, hemicords asymmetry and lower lying conus have significant relationship with neurologic symptoms.

OBJECTIVETo analyze the risk factors of neurological complications of posterior vertebral column resection in the treatment of severe rigid congenital spinal deformities.

METHODSThe clinical data of 88 patients with severe rigid congenital spinal deformities who underwent PVCR in Department Of Orthopaedics, Xijing Hospital, Fourth Military Medical University from June 2007 to November 2012 were collected. There were 39 males and 49 females at the average age of 16.9 years (range 6-46 years). To measure the Cobb angle and balance at preoperative, postoperative and follow up, and to record the operation report, neurological complications and at follow up. The relevant factors of neurological complications were analyzed by one-way analysis, including: age, Cobb angle, operation time, body mass index, pulmonary function, blood volume loss, resection level, number of vertebrae fixed, number of vertebrae resected, usage of cage or titanium mesh, preoperative neurologic function, the type of deformity and combination of spinal canal deformity, and further analyzed by multiariable Logistic regression analysis.

RESULTSThe average follow up was 42 months (range 19 to 83 months). The number of resected vertebrae average 1.3 (range 1 to 3), operative time average 502.4 min (range 165.0 to 880.0 min), estimate blood loss average 2,238 ml (range 100 to 11,500 ml) for an average 69.3% blood volume loss (range 9% to 299%). The average preoperative major coronal curve of 93.6° corrected to 22.2°, at the final follow-up, the coronal curve was 22.2° with a correction of 76.8%. The average preoperative coronal imbalance (absolute value) was 2.5 cm decreasing to 1.3 cm at the final follow-up. The average preoperative major sagittal curve of 88.2° corrected to 28.7°, at the final follow-up, the sagittal curve was 29.2°, average decrease in kyphosis of 59.0°. The average preoperative sagittal imbalance (absolute value) was 3.1 cm decreasing to 1.2 cm at the final follow-up. There were 12 patients (13.6%) developed a neurological complications. High rate of neurological complications was occurred in patients with operative time greater than 480 min, pulmonary dysfunction, blood volume loss greater than 50%, T7-T99 osteotomy and preoperative neurologic compromise (P=0.046, 0.000, 0.000, 0.033, 0.043).

CONCLUSIONSPosterior vertebral column resection can achieve satisfactory efficacy in treatment of severe spinal deformities. Pulmonary dysfunction and blood volume loss greater than 50% were significant risk factors of neurological complications.

Adolescent ; Adult ; Child ; Female ; Humans ; Kyphosis ; Male ; Middle Aged ; Neurosurgical Procedures ; Orthopedic Procedures ; Osteotomy ; Retrospective Studies ; Risk Factors ; Scoliosis ; Spinal Canal ; Spinal Diseases ; surgery ; Spine ; abnormalities ; surgery ; Treatment Outcome ; Young Adult