Objective: To assess the clinical application value of a prediction model for red blood cell (RBC) demand in surgical procedures. Methods: Demographic data, laboratory parameters, anesthesia and transfusion records, and model prediction data were retrospectively collected from surgical patients at the First Medical Center of Chinese PLA General Hospital between 2018 and 2024. Statistical analysis was performed using the Chi-square test, t-test, and Mann-Kendall trend test. Results: From 2018 to 2024, the predictive model for RBC demand in surgical procedures was used to evaluate a total of 112 293 surgeries. During this period, the model call rate (77.49%-98.91%, P<0.05), compliance rate (56.81%-84.92%, P<0.05), and prediction accuracy rate (66.82%-94.17%, P<0.05) all showed significant upward trends. The total blood usage across the hospital (13645.4-7723.5 units, P<0.05) and the average blood usage per surgery (0.21-0.1 units, P<0.05) exhibited overall downward trends. Postoperative average hemoglobin levels in the non-compliance group (112.1-105.3 g/L in the non-compliance group vs 106.9-92.7 g/L in the compliance group, P<0.05) and the intraoperative excessive transfusion rate (5.06%-6.05% in the non-compliance group vs 0.09%-0.04% in the compliance group, P<0.05) were significantly higher in the non-compliance group compared to the compliance group. Conclusion: The predictive model for RBC demand in surgical procedures has played a positive role in conserving blood resources, optimizing blood resource allocation, and reducing intraoperative risks.

Objective To investigate the radon activity concentrations in subways of Nanning City and assess the average annual effective doses for subway staff and passengers due to radon exposure. Methods Sixty-three stations across the subway lines 2, 3, and 5 were selected as study sites. Radon activity concentrations were measured using the scintillation counting method with scintillation vials. Results The radon activity concentrations in subway lines 2, 3, and 5 were 7.9-24.4, 12.0-26.2, and 12.6-18.2 Bq/m³, respectively. The average radon activity concentrations for these three lines were (17.4 ± 4.6), (19.1 ± 4.1), and (14.6 ± 1.7) Bq/m³, respectively. Statistical analysis using SPSS 26.0 software revealed a significant difference in radon activity concentrations among these stations (P<0.01). Considering the data in previous research, the average radon activity concentration across all stations in the subway lines of Nanning City was determined to be 17.4 Bq/m³. The estimated average annual effective dose due to radon exposure was 0.131 mSv for subway staff and 0.033 mSv for passengers. Conclusion The radon activity concentrations in the subway lines of Nanning City were significantly lower than the national standard limit (400 Bq/m³). The annual effective doses from radon exposure for both subway staff and passengers were below the limits specified in the Basic Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources (GB18871—2002). The health impact of radon and its progeny on subway staff and passengers in the subway lines of Nanning City was extremely low and can be considered negligible.

ObjectiveTo evaluate the detection specificity for clinical samples and the detection capability for standard substances of five commercially available multiplex polymerase chain reaction (PCR) nucleic acid detection kits (hereinafter referred to as the kits) for respiratory pathogens, and to provide a reference for selecting appropriate detection kits for multi-pathogen nucleic acid testing of respiratory infections. MethodsA total of 60 respiratory pathogen-positive clinical samples with known redults were selected and tested using the five kits (labeled as A, B, C, D, and E). The detection rates and Kappa coefficients were calculated to evaluate the consistency between the results from these kits and those from single-pathogen PCR kits. According to the limit of detection (LOD) provided by the kits, standard substances of respiratory pathogens (including 12 types such as influenza virus, Mycoplasma pneumoniae, and Bordetella pertussis) were diluted to four concentrations (250, 500, 1 000, and 2 000 copies·mL⁻¹). All five kits were used for detection to evaluate their respective detection capabilities. ResultsCompared with the results from single-pathogen PCR kits, the five tested kits demonstrated good consistency (all Kappa >0.80). Among them, Kit A had the highest detection rate (100.00%), followed by Kits C and E (98.33%), and then Kits B and D (95.00%). All five kits showed a relatively low false negative rate (FNR) for samples with a cycle threshold (Ct) value ≤35 (≤2.38%). However, for samples with Ct values>35, the FNR increased accordingly(average FNR=6.67%, P=0.029). Kit C exhibited the highest detection sensitivity for the tested standard substances (average LOD: 458.33 copies·mL⁻¹), followed by Kit D, then Kits A/E, and finally Kit B. ConclusionThe five multiplex PCR kits showed good consistency with single-pathogen detection results, but each had its own performance emphasis. Kit A, with the highest detection rate and high throughput, is suitable for targeted viral screening. Kit B, covering the broadest pathogen spectrum (including fungi/bacteria), is suitable for comprehensive respiratory pathogen screening. Kits C, D and E, are applicable for rapid detection. It is important to note that the detection efficacy of all kits decreases for low viral load samples with Ct values >35. In practical application, selection should be based on specific screening objectives, throughput requirements, and sample types.

Objective To fabricate a large-diameter vascular graft with a pore size gradient structure mimicking that of natural blood vessels, using poly-L-lactic acid (PLLA) and polycaprolactone (PCL) as base materials through electrospinning and ultrasonic pore-forming techniques, and to evaluate its application potential. Methods A three-layered tubular graft was fabricated from a PCL/PLLA blend (mass ratio 6 : 4) via electrospinning, followed by an ultrasonic pore-forming process to create a gradient porosity. The resulting graft (diameter: 2 cm, length: 4 cm) was implanted into the descending thoracic aorta of an experimental pig using an end-to-end anastomosis. Graft patency and anastomotic sites were monitored by computed tomography angiography (CTA) at 1 and 6 weeks post-surgery. After 2 months, the graft was explanted for systematic evaluation of vascular regeneration and repair through gross examination, histopathology (H&E and elastic fiber staining), immunohistochemistry [for ETS-related gene (ERG), Actin, and Vimentin], and scanning electron microscopy (SEM). Results Postoperative CTA confirmed excellent graft patency at both 1 and 6 weeks, with no evidence of thrombosis or anastomotic stenosis. Gross examination of the 2-month explant revealed a smooth luminal surface covered by neotissue. Histopathological analysis demonstrated that the graft successfully induced the formation of a three-layered structure resembling a native vessel wall, comprising endothelial cells, smooth muscle cells, and fibroblasts. Immunohistochemistry further verified coverage of the luminal surface by endothelial cells (ERG-positive), along with the presence of neosmooth muscle (Actin-positive) and fibroblasts (Vimentin-positive). Endothelial cells were observed adhering to the inner surface of the artificial vessel under SEM. Conclusion The biomimetic, three-layered PLLA/PCL large-diameter vascular graft, constructed via electrospinning and ultrasonic pore-forming, exhibits excellent short-term patency and biocompatibility in a large animal model. More importantly, it demonstrates a significant potential to promote host cell infiltration and achieve in situ regeneration of a three-layered vascular wall structure, providing a promising experimental basis for the development of next-generation functional vascular substitutes.

SPF chickens were immunized with HN-mRNA vaccine by intramuscular injection.He-magglutination inhibition(HI)test,lymphocyte proliferation test,RT-qPCR and pathological sec-tions were used to evaluate the humoral and cellular immunity and protection against challenge in-duced by the candidate HN-mRNA vaccine.The results showed that 2.5,5.0,and 7.5 μg HN-mR-NA induced HI antibody antibodies in a dose-dependent manner.Among them,the Hi antibody in-duced by 7.5 μg HN-mRNA was slightly higher than that of the weak toxic vaccine(La Sota strain).In addition,in response to the stimulation of inactivated NDV virus,the proliferation and activation of lymphocytes in 2.5,5.0 and 7.5 μg HN-mRNA immunization groups and commercial vaccine group were observed.To further evaluate the antiviral protection provided by HN mRNA immunization,the 105 ELD50 NDV strong strain NA-1 was used to attack the 7.5 μg HN-mRNA immunised group and the commercial weakened vaccine(La Sota strain)and PBS groups using na-sal and ocular drops.The results showed that the survival rate of 7.5 μg HN-mRNA immunization group and commercial vaccine group was 100％,and these vaccines could protect tissues and or-gans from the damage caused by virus infection.At the same time,7.5 μg HN-mRNA and commer-cial vaccine could shorten the time of virus shedding in vitro and the viral load in vivo.This study provides a foundational framework for the clinical application of NDV HN mRNA candidate vac-cines and offers insights for the development of novel mRNA vaccines for poultry.

SPF chickens were immunized with HN-mRNA vaccine by intramuscular injection.He-magglutination inhibition(HI)test,lymphocyte proliferation test,RT-qPCR and pathological sec-tions were used to evaluate the humoral and cellular immunity and protection against challenge in-duced by the candidate HN-mRNA vaccine.The results showed that 2.5,5.0,and 7.5 μg HN-mR-NA induced HI antibody antibodies in a dose-dependent manner.Among them,the Hi antibody in-duced by 7.5 μg HN-mRNA was slightly higher than that of the weak toxic vaccine(La Sota strain).In addition,in response to the stimulation of inactivated NDV virus,the proliferation and activation of lymphocytes in 2.5,5.0 and 7.5 μg HN-mRNA immunization groups and commercial vaccine group were observed.To further evaluate the antiviral protection provided by HN mRNA immunization,the 105 ELD50 NDV strong strain NA-1 was used to attack the 7.5 μg HN-mRNA immunised group and the commercial weakened vaccine(La Sota strain)and PBS groups using na-sal and ocular drops.The results showed that the survival rate of 7.5 μg HN-mRNA immunization group and commercial vaccine group was 100％,and these vaccines could protect tissues and or-gans from the damage caused by virus infection.At the same time,7.5 μg HN-mRNA and commer-cial vaccine could shorten the time of virus shedding in vitro and the viral load in vivo.This study provides a foundational framework for the clinical application of NDV HN mRNA candidate vac-cines and offers insights for the development of novel mRNA vaccines for poultry.

A novel epileptic seizure prediction prediction model based on multichannel temporal and spatial feature extractions is presented.The model applies Stockwell transform to the original multichannel electroencephalogram(EEG)signals for extracting time-frequency components.To address the issue of insignificant difference between preseizure and interseizure time-frequency features,an adaptive feature module composing of ConvNeXt,SENet and pyramid pooling module is designed to enhance the ability of capturing key time-frequency features in each EEG channel.Meanwhile,a prediction model based on Bi-NLSTM is constructed to improve the spatiotemporal dependence between the time-frequency features of multichannel high-order EEG for further promoting the epilepsy classification performance.On the CHB-MIT dataset,the model has an accuracy,sensitivity,specificity and AUC of 96.0%,97.8%,96.8%and 0.987,respectively,and the false positive rate per hour decreased to 0.038,outperforming the existing mainstream methods.In addition,the effect of each component on the model performance is verified by ablation study.The proposed method improves the overall performance for seizure prediction effectively by optimizing local time-frequency feature extraction and enhancing multichannel spatiotemporal dependence.

Objective:To investigate the effect of dulagopeptide on physical examination indexes,plasma glucose metabolism and islet function in type 2 diabetes mellitus(T2DM)patients with poorly controlled plasma glucose.Methods:135 T2DM patients with poorly controlled plasma glucose who were admitted in our hospital from January 2023 to July 2024 were selected.A prospective randomized controlled design was adopted,they were divided into control group 1(received treatment with sitagliptin,n=45),control group 2(received treatment with insulin glargine,n=45),and observation group(received treatment with dulaglutide,n=45)according to the random number table method.Physical examination indexes,plasma glucose indicators,islet function,and incidence of adverse reactions were compared among the three groups.Results:12 weeks after treatment,body mass index(BMI),waist circumference,fasting plasma glucose(FPG),glycated hemoglobin(HbA1c),and postprandial 2-hour plasma glucose(2hPG)in the observation group were lower than those in control group 1 and control group 2(P＜0.05).12 weeks after treatment,the observation group had the highest HbA1c compliance rate,reaching 71.1％(P＜0.05).12 weeks after treatment,the fasting C-peptide(FC-P)and HOMA-islet(CP-DM)levels in the observation group were higher than those in control group 1 and control group 2(P＜0.05).Conclusion:Dulagopeptide can effectively improve physical examination indexes,plasma glucose indicators,and islet function in T2DM patients with poorly controlled plasma glucose.

Objective To explore the impact of suture configuration and fixation type on the biome-chanical strength of rotator cuff repair,using a factorial design study.Methods Sixteen fresh-frozen porcine shoulder samples were randomized into an anchorless double-row suture bridge transosseous su-tures(DS)group,an anchored double-row suture bridge transosseous-equivalent(DE)group,an an-chorless X-BOX construct transosseous sutures(XS)group,and an anchored X-BOX construct transos-seous-equivalent(XE)group,each of four,according to suture configuration(double-row suture bridge,traditional X-BOX construct)and fixation type(suture anchors,transosseous sutures).Then,their fatigue resistance(first-cycle excursion,gap length difference ratio,and the percentage of ex-posed footprints)and the failure strength(the maximum failure load and the re-tear type)were mea-sured using a biomechanical material testing machine.Results Different suture configurations affected failure strength(F=39.559,P<0.001),with the double-row suture bridge groups(693.07±58.35 N,746.76±138.57 N)showing significantly higher failure strength,compared to the traditional X-BOX groups(462.90±18.91 N,421.43±90.76 N).However,the fixation type did not significantly im-pact failure strength(F=1.161,P=0.302).Moreover,the suture configuration influenced the gap differ-ence ratio(F=7.781,P=0.016),but had no significant correlation with other fatigue resistance indica-tors(P>0.05).Meanwhile,failure strength and fatigue resistance were not correlated with fixation type,and the interaction between suture and fixation type(P>0.05).The incidence of failure types for the four suture configurations was as follows:Type I tendon tear:XS>XE>DS=DE;type II tendon tear:DS>XE>XS=DE;fixing material-related failure:DE>DS=XE=XS.Conclusion The failure strength and gap formation ratio in rotator cuff repair under fatigue loading are influenced by suture configuration,whereas no significant association has been observed with respect to fixation method,whether using transosseous sutures or suture anchors.

Objective To explore the impact of suture configuration and fixation type on the biome-chanical strength of rotator cuff repair,using a factorial design study.Methods Sixteen fresh-frozen porcine shoulder samples were randomized into an anchorless double-row suture bridge transosseous su-tures(DS)group,an anchored double-row suture bridge transosseous-equivalent(DE)group,an an-chorless X-BOX construct transosseous sutures(XS)group,and an anchored X-BOX construct transos-seous-equivalent(XE)group,each of four,according to suture configuration(double-row suture bridge,traditional X-BOX construct)and fixation type(suture anchors,transosseous sutures).Then,their fatigue resistance(first-cycle excursion,gap length difference ratio,and the percentage of ex-posed footprints)and the failure strength(the maximum failure load and the re-tear type)were mea-sured using a biomechanical material testing machine.Results Different suture configurations affected failure strength(F=39.559,P<0.001),with the double-row suture bridge groups(693.07±58.35 N,746.76±138.57 N)showing significantly higher failure strength,compared to the traditional X-BOX groups(462.90±18.91 N,421.43±90.76 N).However,the fixation type did not significantly im-pact failure strength(F=1.161,P=0.302).Moreover,the suture configuration influenced the gap differ-ence ratio(F=7.781,P=0.016),but had no significant correlation with other fatigue resistance indica-tors(P>0.05).Meanwhile,failure strength and fatigue resistance were not correlated with fixation type,and the interaction between suture and fixation type(P>0.05).The incidence of failure types for the four suture configurations was as follows:Type I tendon tear:XS>XE>DS=DE;type II tendon tear:DS>XE>XS=DE;fixing material-related failure:DE>DS=XE=XS.Conclusion The failure strength and gap formation ratio in rotator cuff repair under fatigue loading are influenced by suture configuration,whereas no significant association has been observed with respect to fixation method,whether using transosseous sutures or suture anchors.