Background Work-related musculoskeletal disorders (WMSDs) are a major occupational health concern, particularly among workers exposed to adverse ergonomic conditions. Manganese production involves heavy physical demands, yet research on WMSDs among manganese workers remains limited. Objective To investigate the prevalence and influencing factors of WMSDs among manganese workers in a manganese enterprise in Guangxi. Methods A cross-sectional survey was conducted from May to June 2024 on workers at a manganese factory in Guangxi. The Chinese Musculoskeletal Disorders Questionnaire was used to collect information on demographic characteristics, distribution of musculoskeletal symptoms, and work-related exposures. χ² test was applied to compare differences in positive WMSDs rates across groups, and logistic regression analysis was performed to identify associated factors. Results A total of 1476 workers were enrolled in the study after pre-determined inclusion and exclusion criteria. The overall prevalence of WMSDs was 34.15%. The most commonly affected body regions were the lower back (17.28%), neck (16.67%), and shoulders (13.82%). The results of logistic regression analysis indicated that female, older age, and education level of college or above were associated with a higher risk of WMSDs (P<0.05). Awkward working postures were significantly associated with WMSDs in corresponding body regions; in particular, awkward postures of the neck, upper limbs, trunk, and lower limbs were related to an increased risk of WMSDs in multiple body sites (P<0.05). In addition, poor lighting conditions, high workplace temperature, frequent or sustained arm support during work, and high job demands were associated with an increased risk of overall or site-specific WMSDs (P<0.05). Conclusion The high prevalence of WMSDs among manganese workers is closely associated with demographic characteristics, working postures, and work environment and organizational factors. Targeted ergonomic interventions focusing on high-risk body regions and key ergonomic exposures are warranted to reduce the risk of WMSDs among manganese workers.

The conversion of abundant and low-cost biomass waste into highly efficient two-electron oxygen reduction(ORR)electrocatalyst is an important link in the degradation of pollutants in industrial wastewater through the electro-Fenton process.In this work,porous biocarbon materials doped with manganese and nitrogen(MnNBC)were prepared from corn stalk.The H2O2 selectivity of MnNBC in acidic media was up to 81% @0.6 Vvs RHE,also MnNBC exhibited a long-term stability in a 10-h uninterrupted lifetime test.The ORR activity of MnNBC could be attributed to the synergistic effect of the hierarchical porous structure,improved defect level and heteroatom doping.Moreover,MnNBC as a cathode material for the electro-Fenton system could completely degrade four kinds of common organic dye pollutants,e.g.,Rhodamine B,methyl orange,methylene blue and crystal violet(25 mg/L),respectively,within 40?60 min.The present study provided valuable insights into the transformation of corn stalk waste into efficient cathode materials for the electro-Fenton process.

Mechanical pain is one of the most common causes of clinical pain, but there remains a lack of effective treatment for debilitating mechanical and chronic forms of neuropathic pain. Recently, neurotoxin GsMTx4, a selective mechanosensitive (MS) channel inhibitor, has been found to be effective, while the underlying mechanism remains elusive. Here, with multiple rodent pain models, we demonstrated that a GsMTx4-based 17-residue peptide, which we call P10581, was able to reduce mechanical hyperalgesia and neuropathic pain. The analgesic effects of P10581 can be as strong as morphine but is not toxic in animal models. The anti-hyperalgesic effect of the peptide was resistant to naloxone (an μ-opioid receptor antagonist) and showed no side effects of morphine, including tolerance, motor impairment, and conditioned place preference. Pharmacological inhibition of TRPV4 by P10581 in a heterogeneous expression system, combined with the use of Trpv4 knockout mice indicates that TRPV4 channels may act as the potential target for the analgesic effect of P10581. Our study identified a potential drug for curing mechanical pain and exposed its mechanism.

This review described the potential health threats to the cardiovascular system from micro-nano plastics (MNPs) and their multifaceted toxicity mechanisms. The article reviewed the environmental distribution of MNPs, exposure pathways, and their toxic effects on the cardiovascular system, and summarized the specific mechanisms of MNPs involving oxidative stress, inflammatory response, mitochondrial damage, apoptosis, pyroptosis, and autophagy dysregulation. Meanwhile, the combined toxic effects of MNPs with other environmental pollutants (e.g., heavy metals and polycyclic aromatic hydrocarbons), including synergistic, antagonistic, and dual effects, were analyzed, and the potential risks of MNPs as carriers of microorganisms and toxic chemicals were pointed out. The widespread presence of MNPs and their complex toxicity mechanisms may make them important triggers for cardiovascular diseases, but current research still suffers from unbalanced studies across environmental systems, incomplete understanding of plastic properties, and limited knowledge of long-term biological effects. Future research should focus on the long-term effects of MNPs, the joint toxicity mechanisms with other pollutants, and the differential effects across population subgroups. It is suggested to accelerate plastic recycling technology innovation, promote biodegradable materials, and optimize waste treatment process to mitigate the potential threat of MNPs pollution to human health. Through multidisciplinary collaboration and in-depth research, combining innovative concepts from toxicology, public health policy, and environmental science, it is expected to provide new methods and approaches for the prevention and treatment of cardiovascular diseases associated with MNPs.

Objective: To explore the potential category patterns of risk prevention and control behaviors of HIV infection among young students who have sex with men (MSM) and their impact on HIV infection and late detection, aiming to optimize intervention strategies. Methods: From September 2017 to December 2024, a total of 1 637 MSM young students in Tianjin were recruited through both online and offline channels. Latent class analysis was applied to classify 11 HIV risk prevention and control behaviors [condom use during the most recent anal sex in the past 6 months, consistent condom use, use of water based lubricants, abstinence from recreational drugs, regular on site professional testing, fixed sexual partners, partner testing, awareness of partner s HIV testing results, testing before sexual activity, nucleic acid testing, and use of pre exposure prophylaxis (PrEP) or post exposure prophylaxis (PEP)]. Multivariate Logistic regression analyzed associations between demographic characteristics/intervention services factors and latent classes. Differences in HIV infection and late detection across behavior patterns were compared. Results: HIV risk prevention and control behaviors among MSM students were classified into three latent classes:condom dependent group (38.42%), low prevention group (27.73%), and comprehensive prevention group (33.85%). Students who received condom promotion/testing services were more likely to belong to the comprehensive prevention group ( OR =5.58), while those who received peer education were less likely to the comprehensive prevention group ( OR =0.43) (both P <0.01). Among the MSM student population, the HIV infection rate was 4.83%, with 2.26% of cases detected late. The HIV infection rate (1.45%) and late detection proportion (0.82%) in the comprehensive prevention group were lower than those in the low prevention group (7.89% and 3.83%, respectively) ( χ 2=16.20, 7.31, both P <0.01). Conclusions HIV risk prevention and control behaviors among MSM young students exhibit significant heterogeneity. Comprehensive prevention strategies can effectively reduce HIV infection and late detection risks. It is necessary to optimize peer education content and improve the accessibility of diversified prevention measures such as PrEP/PEP to enhance HIV prevention and control.

Objective To explore the impact of suture configuration and fixation type on the biome-chanical strength of rotator cuff repair,using a factorial design study.Methods Sixteen fresh-frozen porcine shoulder samples were randomized into an anchorless double-row suture bridge transosseous su-tures(DS)group,an anchored double-row suture bridge transosseous-equivalent(DE)group,an an-chorless X-BOX construct transosseous sutures(XS)group,and an anchored X-BOX construct transos-seous-equivalent(XE)group,each of four,according to suture configuration(double-row suture bridge,traditional X-BOX construct)and fixation type(suture anchors,transosseous sutures).Then,their fatigue resistance(first-cycle excursion,gap length difference ratio,and the percentage of ex-posed footprints)and the failure strength(the maximum failure load and the re-tear type)were mea-sured using a biomechanical material testing machine.Results Different suture configurations affected failure strength(F=39.559,P<0.001),with the double-row suture bridge groups(693.07±58.35 N,746.76±138.57 N)showing significantly higher failure strength,compared to the traditional X-BOX groups(462.90±18.91 N,421.43±90.76 N).However,the fixation type did not significantly im-pact failure strength(F=1.161,P=0.302).Moreover,the suture configuration influenced the gap differ-ence ratio(F=7.781,P=0.016),but had no significant correlation with other fatigue resistance indica-tors(P>0.05).Meanwhile,failure strength and fatigue resistance were not correlated with fixation type,and the interaction between suture and fixation type(P>0.05).The incidence of failure types for the four suture configurations was as follows:Type I tendon tear:XS>XE>DS=DE;type II tendon tear:DS>XE>XS=DE;fixing material-related failure:DE>DS=XE=XS.Conclusion The failure strength and gap formation ratio in rotator cuff repair under fatigue loading are influenced by suture configuration,whereas no significant association has been observed with respect to fixation method,whether using transosseous sutures or suture anchors.

SPF chickens were immunized with HN-mRNA vaccine by intramuscular injection.He-magglutination inhibition(HI)test,lymphocyte proliferation test,RT-qPCR and pathological sec-tions were used to evaluate the humoral and cellular immunity and protection against challenge in-duced by the candidate HN-mRNA vaccine.The results showed that 2.5,5.0,and 7.5 μg HN-mR-NA induced HI antibody antibodies in a dose-dependent manner.Among them,the Hi antibody in-duced by 7.5 μg HN-mRNA was slightly higher than that of the weak toxic vaccine(La Sota strain).In addition,in response to the stimulation of inactivated NDV virus,the proliferation and activation of lymphocytes in 2.5,5.0 and 7.5 μg HN-mRNA immunization groups and commercial vaccine group were observed.To further evaluate the antiviral protection provided by HN mRNA immunization,the 105 ELD50 NDV strong strain NA-1 was used to attack the 7.5 μg HN-mRNA immunised group and the commercial weakened vaccine(La Sota strain)and PBS groups using na-sal and ocular drops.The results showed that the survival rate of 7.5 μg HN-mRNA immunization group and commercial vaccine group was 100％,and these vaccines could protect tissues and or-gans from the damage caused by virus infection.At the same time,7.5 μg HN-mRNA and commer-cial vaccine could shorten the time of virus shedding in vitro and the viral load in vivo.This study provides a foundational framework for the clinical application of NDV HN mRNA candidate vac-cines and offers insights for the development of novel mRNA vaccines for poultry.

Objective To analyze the risk factors of delayed wound recovery after Meek skin grafting in patients with extensive deep burn and its predictive efficiency.Methods A total of 100 patients with extensive deep burn who underwent Meek skin grafting from August 2018 to November 2024 were selected,and they were divided into the normal group(n=79)and the delayed group(n=21)according to the wound healing time.The clinical data of all patients were collected,and the influencing factors of delayed wound recovery after Meek skin grafting in patients with extensive deep burn were analyzed by Logistic regression model,and the efficiency of the model was analyzed by the receiver operating characteristic(ROC)curve and the Hosmer-Lemeshow goodness-of-fit test,respectively.Results There were statistically significant differences in the body mass index,hospitalization time,burn index,burn area,donor skin area,number of postoperative dressing change,postoperative nutritional support,postoperative pain scores,and hospitalized blood glucose levels between the two groups(P<0.05).Logistic regression analysis showed that high burn index(OR=1.086,β=0.082),large burn area(OR=1.155,β=0.144),fewer postoperative dressing change(OR=0.746,β=-0.293),lack of postoperative nutritional support(OR=6.439,β=1.862),high postoperative pain score(OR=4.483,β=1.500),and high level of hospitalized blood glucose(OR=2.251,β=0.811)were the influencing factors for delayed wound recovery after Meek skin grafting in patients with extensive deep burn(P<0.05).The ROC curve revealed that the combined prediction of the above six influencing factors for delayed postoperative wound recovery had an area under the ROC curve(AUC)of 0.896,with a sensitivity and specificity of 88.00%and 89.10%,respectively;and the Hosmer-Lemeshow test result showed:χ2=10.641,and P=0.223,indicating a high predictive efficacy and a certain calibration ability of the model.Conclusion The high burn index,large burn area,fewer postoperative dressing change,lack of postoperative nutritional support,high postoperative pain score and hospitalized blood glucose level were the influencing factors for delayed wound recovery after Meek skin grafting in patients with extensive deep burn,and the prediction model constructed by the above factors has good predictive ability,which can provide a reference for clinical treatment.

BACKGROUND:Cervical instability is a common orthopedic disease in young and middle-aged people,and is the early manifestation of cervical spondylosis,which has a great impact on the quality of life of patients.Therefore,early diagnosis of cervical instability to implement early intervention has positive clinical and social significance.OBJECTIVE:The clinical prediction model of cervical instability in young and middle-aged people was constructed based on machine learning to realize early screening of cervical instability in young and middle-aged people before X-ray examination.METHODS:From September 2022 to October 2023,155 young and middle-aged adults with cervical instability and 88 with non-cervical instability recruited through recruitment advertisements and spinal department outpatient of Wangjing Hospital,China Academy of Chinese Medical Sciences were selected as research subjects.The research subjects'general information,living and working habits,discomfort symptoms,visual analog scale score,Neck Disability Index,and 36-ltem Short Form Health Survey were collected on site based on questionnaires.The above information was used as predictive factors.After screening,six machine learning algorithms of Support Vector Machine,LightGBM,RandomForest,Logistic,AdaBoost,and XGBClassifier were used to train the model by ten-fold cross-validation method,and the clinical prediction model of cervical instability was constructed.Area under the curve was used as the main evaluation index.Univariate analysis was performed on the predictors,and SHAP method was used to rank the importance of the predictors.Correlation heat maps were used to show the degree of linear correlation between the predictors and the cervical instability.RESULTS AND CONCLUSION:(1)Among the six machine learning models,RandomForest model was chosen as the final prediction model,including nine predictors,such as age,body mass index,neck circumference/neck length,visual analog scale score,Neck Disability Index,bodily pain,general health,vitality,and mental health,area under the curve=0.725 4,and the calibration degree was good.It could be used as a reference tool for early screening of cervical instability in young and middle-aged people.(2)There were significant differences in age,visual analog scale score,Neck Disability Index,bodily pain,general health,and vitality between the two groups(P＜0.05).(3)The order of importance of predictors was age,Neck Disability Index,visual analog scale score,general health,body mass index,vitality,bodily pain,neck circumference/neck length,mental health,among which age,visual analog scale score,Neck Disability Index were positively correlated with cervical instability,while general health,body mass index,vitality,bodily pain,neck circumference/neck length,and mental health were negatively correlated with cervical instability.

Objective To systematically evaluate the radiation impact of radioactive sources used in online elemental analyzers in cement enterprises on the surrounding environment, and to provide a scientific basis for radiation monitoring and safety management at the application sites of this type of radioactive sources. Methods A statistical analysis was conducted on 15 cement enterprises in Guangxi Province using online elemental analyzers with ²⁵²Cf as the radioactive source. On-site investigation of radiation safety management and on-site monitoring of radiation environment were performed, followed by an evaluation based on the collected data. Results Although the gamma radiation ambient dose equivalent rate and neutron ambient dose equivalent rate increased around the sites using online elemental analyzers with ²⁵²Cf as the radioactive source, they all met the requirements of the Radiological Health Protection Requirements for Instruments with Sealed Sources (GBZ 125—2009). Conclusion Under the current usage and management conditions, the application of this type of radioactive sources has controllable radiation impact on the surrounding environment, and will not pose a threat to public health and environmental safety. However, continuous strengthening of radiation safety management measures and regular radiation monitoring work are still needed to ensure the safe use of radioactive sources, further reducing potential radiation risks and providing strong guarantees for the safe application of radioactive sources in online elemental analyzers in cement enterprises.