The prescription of Qidong Yixin oral liquid is derived from the experience of national medical master Ren Jixue in treating viral myocarditis （VMC）. It has the functions of tonifying Qi， nourishing the heart，calming the mind， and relieving palpitations. It is used to treat VMC and angina pectoris of coronary heart disease caused by deficiency of both Qi and Yin. However，the understanding of its efficacy evidence， advantageous aspects， dosage and administration， and medication safety remains insufficient in clinical practice. Therefore，the development of the Expert Consensus on the Clinical Application of Qidong Yixin Oral Liquid （hereinafter referred to as consensus） was initiated. Consensus strictly followed the process and methods of the expert consensus on the clinical application of Chinese patent medicines of the China Association of Chinese Medicine，successively completing multiple tasks such as the consensus project initiation，determination of clinical problems，evidence search and evaluation，formation of recommendation opinions and consensus suggestions，solicitation of opinions，peer review， submission for review and release， and so on. Consensus formed a total of 10 recommendation opinions and 12 consensus suggestions，clarifying the clinical positioning，efficacy advantages，syndrome differentiation，dosage and administration，combination therapy，timing of medication，adverse reactions，contraindications， and precautions of Qidong Yixin oral liquid，indicating that it has good clinical advantages and safety in the treatment of VMC and angina pectoris of coronary heart disease，providing norms and references for physicians to safely and rationally apply Qidong Yixin oral liquid. Consensus was reviewed and approved for release by the Standardization Office of the China Association of Chinese Medicine on December 23， 2024. Standard number：GSCACM-376-2024.

ObjectiveTo explore the possible mechanisms by which ligustilide （LIG） exerts neuroprotective effects on ischemic stroke （IS） by inhibiting the release of neutrophil extracellular traps （NETs）， promoting blood-brain barrier repair， and alleviating post-ischemic neuroinflammation， thereby providing a new direction for IS treatment. MethodsA middle cerebral artery occlusion （MCAO） model was established in rats. The rats were divided into the sham operation （Sham） group， model （Model） group， low- and high-dose LIG groups （20， 40 mg·kg^-1）， and the NET inhibitor CI-amidine group （CI-amidine， 10 mg·kg^-1）. Drug treatments were administered for 3 days. Neurological injury after ischemia was evaluated by 2，3，5-triphenyltetrazolium chloride （TTC） staining， neurological deficit scoring， and brain index measurement. Flow cytometry and Western blot were used to analyze changes in neutrophil expression. Immunofluorescence was used to observe the fluorescence intensity of the NET marker citrullinated histone H3 （H3Cit）. Western blot was performed to detect the expression of blood-brain barrier tight junction-related proteins and inflammatory factors， including interleukin-18 （IL-18） and interleukin-1β （IL-1β）. ResultsCompared with the Sham group， the Model group exhibited significant brain tissue injury （P<0.05）， significantly increased neutrophil numbers and NET expression （P<0.05）， significantly impaired blood-brain barrier permeability （P<0.05）， and significantly increased expression of inflammatory factors （P<0.05）. Compared with the Model group， both low- and high-dose LIG significantly alleviated brain tissue injury in rats （P<0.01）， inhibited neutrophil numbers and NET expression （P<0.01）， reduced blood-brain barrier damage （P<0.01）， and suppressed the expression of inflammatory factors IL-18 and IL-1β （P<0.01）， thereby ultimately exerting a neuroprotective effect. ConclusionThe neuroprotective effect of LIG in rats with cerebral ischemia-reperfusion injury may be related to inhibition of neutrophils and the NETs induced by them.

BackgroundPatients with depressive episode and schizophrenia have a high risk of suicide. The sleep electroencephalogram power spectral density characteristics of patients with depressive episode accompanied by suicidal behavior and those with schizophrenia may be different， but there is currently a lack of direct comparative studies on these two groups of patients. ObjectiveTo compare the sleep electroencephalogram power spectral density between depressive episode and schizophrenic patients with suicidal behavior， in order to provide references for exploring predictive indicators of suicidal behavior. MethodsFrom June 2018 to December 2020， 20 patients with depressive episode and 20 patients with schizophrenia who had committed suicide within the past month and were treated at the outpatient department of Shenzhen Kangning Hospital were selected. All of them met the diagnostic criteria for depressive episode or schizophrenia as defined in the International Classification of Diseases， tenth edition （ICD-10）. Using a random sampling method， 20 volunteers with matching gender and age to the patient groups were selected from the Cuiping community in Shenzhen as the control group. The subjective sleep of the patients was evaluated using the Insomnia Severity Index （ISI）， the Dysfunctional Belief and Attitude about Sleep （DBAS）， the Disturbing Dreams and Nightmare Severity Index （DDNSI）， and the Epworth Somnolence Scale （ESS）. The objective sleep of the patients was assessed using polysomnography. The sleep electroencephalogram was filtered and the power spectral density of the brain wave was analyzed and processed for all the subjects. The subjective and objective sleep conditions of the two patient groups were compared， and the sleep electroencephalogram power spectral density of the patient groups and the control group were also compared. ResultsA comparison of subjective and objective sleep conditions between patients with depressive episode accompanied by suicidal behavior and patients with schizophrenia accompanied by suicidal behavior showed no statistically significant differences （P>0.05）. Comparisons of sleep electroencephalogram power spectral density in the W stage （average power of α wave， total power of δ wave， average power of δ wave， average power of θ wave）， N1 stage （average power of β wave， total power of α wave， total power of δ wave）， N2 stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave）， N3 stage （average power of α wave， average power of δ wave）， and R stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave） between patients with depressive episode accompanied by suicidal behavior， patients with schizophrenia accompanied by suicidal behavior， and the control group showed statistically significant differences （P<0.05 or 0.01）. The total power of δ wave in the W stage and the average power of β wave and δ wave in the N1 stage were higher in two patient groups were higher than those of the control group. The total power of α wave and the average power of α wave in the N2 stage were lower than those of the control group， while the average power of δ wave was higher than that of the control group. The average power of α wave in the N3 stage of both patient groups were lower than that of the control group， while the average power of δ wave was higher than that of the control group. The total power and average power of α wave in the R stage were lower than those of the control group， while the total power and average power of δ wave were higher than those of the control group. All the differences were statistically significant. Patients with depressive episode accompanied by suicidal behavior had higher average powers of α wave， δ wave， and θ wave in the W stage compared with the control group， while the total power of α wave in the N1 stage was lower in the former group. All these differences were statistically significant （P<0.05）. ConclusionThe depressive episode patients accompanied by suicidal behavior have highly overlapping sleep electroencephalogram abnormal patterns with those of schizophrenia patients， mainly manifested as a general decrease in α wave power （N2， N3， R stage） and a general increase in δ wave power （W， N1， N2， N3， R stage） as well as β wave power in N1 stage. At the same time， patients with depressive episode accompanied by suicidal behavior also show specific changes， including an increase in the average power of α and θ waves during the wakefulness period （W stage）， and a decrease in the total power of α wave in N1 stage. ［Funded by Guangdong Province High-level Clinical Key Specialty （with supporting funds from Shenzhen City） （number， SZGSP013）； Shenzhen Key Medical Discipline （number， SZXK041）； Shenzhen Clinical Medicine Research Center Project （number， 20210617155253001）］

ObjectiveTo explore the possible mechanisms by which ligustilide （LIG） exerts neuroprotective effects on ischemic stroke （IS） by inhibiting the release of neutrophil extracellular traps （NETs）， promoting blood-brain barrier repair， and alleviating post-ischemic neuroinflammation， thereby providing a new direction for IS treatment. MethodsA middle cerebral artery occlusion （MCAO） model was established in rats. The rats were divided into the sham operation （Sham） group， model （Model） group， low- and high-dose LIG groups （20， 40 mg·kg^-1）， and the NET inhibitor CI-amidine group （CI-amidine， 10 mg·kg^-1）. Drug treatments were administered for 3 days. Neurological injury after ischemia was evaluated by 2，3，5-triphenyltetrazolium chloride （TTC） staining， neurological deficit scoring， and brain index measurement. Flow cytometry and Western blot were used to analyze changes in neutrophil expression. Immunofluorescence was used to observe the fluorescence intensity of the NET marker citrullinated histone H3 （H3Cit）. Western blot was performed to detect the expression of blood-brain barrier tight junction-related proteins and inflammatory factors， including interleukin-18 （IL-18） and interleukin-1β （IL-1β）. ResultsCompared with the Sham group， the Model group exhibited significant brain tissue injury （P<0.05）， significantly increased neutrophil numbers and NET expression （P<0.05）， significantly impaired blood-brain barrier permeability （P<0.05）， and significantly increased expression of inflammatory factors （P<0.05）. Compared with the Model group， both low- and high-dose LIG significantly alleviated brain tissue injury in rats （P<0.01）， inhibited neutrophil numbers and NET expression （P<0.01）， reduced blood-brain barrier damage （P<0.01）， and suppressed the expression of inflammatory factors IL-18 and IL-1β （P<0.01）， thereby ultimately exerting a neuroprotective effect. ConclusionThe neuroprotective effect of LIG in rats with cerebral ischemia-reperfusion injury may be related to inhibition of neutrophils and the NETs induced by them.

Objective: To explore the effect of YTH domain family protein 1(YTHDF1) on the activation, proliferation and migration of hepatic stellate cells(HSCs) by regulating mitochondrial fission mediated by mitochondrial fission protein 1(Fis1). Methods: The mouse hepatic stellate cell line JS-1 was treated with 5 ng/ml TGF-β1 for 24 h to induce its activation and proliferation, andYTHDF1-siRNA was used to construct aYTHDF1silencing model.The experiment was divided into Control group, TGF-β1 group, TGF-β1+si-NC group and TGF-β1+si-YTHDF1 group.Expression changes ofYTHDF1,Fis1and key indicators of fibrosis, type Ⅰ collagen(CollagenⅠ) and α-smooth muscle actin(α-SMA) were detected through reverse transcription quantitative polymerase chain reaction(RT-qPCR) and Western blot; CCK-8 was used to detect cell proliferation ability; Transwell migration assay and cell scratch assay were used to detect cell migration ability; immunofluorescence staining experiment was used to detect the effect ofYTHDF1onFis1-mediated mitochondrial fission; finally, JC-1 staining was used to experimentally detect the effect ofYTHDF1on mitochondrial membrane potential. Results: Compared with the Control group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1increased in the TGF-β1 group(P<0.05,P<0.01;P<0.000 1), as well as the fibrosis markersCollagenⅠand the expression level of α-SMA increased(P<0.01;P<0.001,P<0.000 1); while adding CCK-8, the experimental results showed that the proliferation ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); Transwell experimental results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.01); the cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1 group was enhanced(P<0.000 1); the immunofluorescence experiment results showed that the TGF-β1 group Mito-Tracker Red staining andFis1co-localization signal increased(P<0.05); JC-1 staining experiment results showed that the mitochondrial membrane potential increased in the TGF-β1 group(P<0.01). Compared with the TGF-β1+si-NC group, RT-qPCR and Western blot experimental results showed that the expression ofYTHDF1andFis1in the TGF-β1+si-YTHDF1 group was reduced(P<0.01;P<0.001), and fibrosis markers the levels ofCollagenⅠandα-SMAwere reduced(P<0.01;P<0.001,P<0.01).CCK-8 experimental results showed that the proliferation ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); Transwell experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.001); cell scratch experiment results showed that the migration ability of HSCs in the TGF-β1+si-YTHDF1 group was weakened(P<0.000 1); immunofluorescence experiment results showed that the Mito-Tracker Red staining andFis1co-localization signal decreased in the TGF-β1+si-YTHDF1 group(P<0.01); JC-1 staining experiment results showed that mitochondrial membrane potential decreased in the TGF-β1+si-YTHDF1 group(P<0.05). Conclusion YTHDF1promotes the activation, proliferation and migration capabilities of HSCs by positively regulatingFis1-mediated mitochondrial fission. This suggests thatYTHDF1may be a key gene involved in regulating the activation, proliferation and migration of HSCs.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.