OBJECTIVES: Whether vortioxetine has a utility as an adjuvant drug in the treatment of bipolar depression remains controversial. This study aimed to validate the efficacy and safety of vortioxetine in bipolar depression. METHODS: Patients with bipolar Ⅱ depression were enrolled in this prospective, two-center, randomized, 12-week pilot trial. The main indicator for assessing treatment effectiveness was a Montgomery-Asberg Depression Rating Scale (MADRS) of ≥50%. All eligible patients initially received four weeks of lurasidone monotherapy. Patients who responded well continued to receive this kind of monotherapy. However, no-response patients were randomly assigned to either valproate or vortioxetine treatment for eight weeks. By comprehensively comparing the results of MADRS over a period of 4‍‒‍12 weeks, a systematic analysis was conducted to determine whether vortioxetine could be used as an adjuvant drug for treating bipolar depression. RESULTS: Thirty-seven patients responded to lurasidone monotherapy, and 60 patients were randomly assigned to the valproate or vortioxetine group for eight weeks. After two weeks of combined valproate or vortioxetine treatment, the MADRS score in the vortioxetine group was significantly lower than that in the valproate group. There was no difference in the MADRS scores between the two groups at 8 and 12 weeks. The incidence of side effects did not significantly differ between the valproate and vortioxetine groups. Importantly, three patients in the vortioxetine group appeared to switch to mania or hypomania. CONCLUSIONS This study suggested that lurasidone combination with vortioxetine might have potential benefits to bipolar II depression in the early stage, while disease progression should be monitored closely for the risk of switching to mania.
Humans ; Bipolar Disorder/drug therapy* ; Vortioxetine/therapeutic use* ; Male ; Female ; Middle Aged ; Adult ; Valproic Acid/administration & dosage* ; Lurasidone Hydrochloride/administration & dosage* ; Prospective Studies ; Treatment Outcome ; Pilot Projects ; Drug Therapy, Combination ; Sulfides/therapeutic use* ; Antidepressive Agents/therapeutic use*

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

OBJECTIVE To systematically analyze the functional system and construction requirements for infection prevention and control('infection control system'in short)in medical institutions so as to facilitate the effective,standardized and practical construction of the infection control system.METHODS The questionnaires were de-signed based on the relevant criteria and literatures that were released in China with the combination of expect con-sultant and were distributed to experts or professionals involving multiple fields such as hospital infection manage-ment,clinical medical treatment and information technology.The questionnaires were recycled,summarized and analyzed.RESULTS The list of functions of the infection control system(consultative draft)was formulated after review of literatures and expert consultation,including fundamental functions such as data management,case sur-veillance and intervention feedback as well as the advanced functions like target surveillance,occupational protec-tion and interconnection.The surveyed subjects agreed unanimously after the questionnaire survey that all of the function modules and elements enlisted were important,the average score of importance was more than 4 points,the score of coefficient of variable(CV)for importance of the function modules was less than 0.25,indicating that there was high consistency in the opinions among the surveyed subjects.The element of tracing and epidemiologi-cal survey function was adopted and added according to the feedback suggestions from some of the subjects;two function elements including data query and clinical interaction were revised,and the list of function requirements for the infection control systems was finally defined.CONCLUSION The requirements for functions of the infection control system that are determined in the study can provide important bases and data support for the research and standardized development of future infection control system.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Objective:To evaluate the association between the preoperative aspartate aminotransferase/alanine aminotransferase (AST/ALT) ratio and postoperative delirium (POD) in patients undergoing total knee/hip arthroplasty.Methods:In this nested case-control study, medical records from patients, aged ≥55 yr, of American Society of Anesthesiologists Physical Status classification Ⅰ or Ⅱ, with Mini-Mental State Examination (MMSE) scale score >24 on preoperative day 1, scheduled for elective total knee/hip arthroplasty under combined spinal-epidural anesthesia at Qingdao Municipal Hospital between November 2021 and December 2023, were collected. POD was assessed using the Confusion Assessment Method. Patients were categorized into POD and non-POD groups based on the occurrence of POD. Logistic regression was employed to identify protective and risk factors for POD. The predictive performance of preoperative AST/ALT ratio alone and its combination with cerebrospinal fluid (CSF) biomarker concentrations for POD was evaluated using receiver operating characteristic curves, and the clinical utility of the prediction models was assessed using decision curve analysis. Mediation analysis was conducted to examine the mediation role of CSF biomarkers in the relationship between the preoperative AST/ALT ratio and POD. Restricted cubic splines were used to assess the nonlinear relationship between the preoperative AST/ALT ratio and POD.Results:A total of 460 patients were finally included, with 49 in POD group and 411 in non-POD group. After adjustment for multiple confounding factors including age, sex, educational level, MMSE score, history of hypertension, history of diabetes, history of smoking and history of alcohol use, multivariable logistic regression identified that the higher preoperative AST/ALT ratio, CSF total tau protein (t-tau) and phosphorylated tau protein (p-tau) concentrations were independent risk factors for POD, whereas lower CSF β-amyloid 42 (Aβ 42) concentration, Aβ 42/t-tau ratio and Aβ 42/p-tau ratio served as protective factors ( P<0.05). The area under the receiver operating characteristic curve of the preoperative AST/ALT ratio combined with CSF biomarkers in predicting POD was 0.939 ( P<0.001), demonstrating high clinical efficacy. After adjusting for age, educational level, sex, MMSE score, history of hypertension, history of diabetes, history of smoking, history of alcohol use and body mass index, restricted cubic splines revealed a nonlinear relationship between preoperative AST/ALT levels and the probability of POD, and the probability of POD increased with rising ratios when the preoperative AST/ALT ratio ranged from 1.09 to 1.40 ( Poverall < 0.05, Pnonlinear <0.05). After stratification by sex, the preoperative AST/ALT ratio demonstrated a linear relationship with the probability of POD ( Poverall <0.05, Pnonlinear>0.05). Mediation analysis indicated that the relationship between the preoperative AST/ALT ratio and POD was partially mediated by CSF p-tau concentration (proportion mediated 18.1%), CSF t-tau concentration (proportion mediated 12.0%), and the Aβ 42/t-tau ratio (proportion mediated 15.4%). Conclusions:A higher preoperative AST/ALT ratio is an independent risk factor for POD in total knee/hip arthroplasty patients. The concentrations of CSF t-tau and p-tau and Aβ 42/t-tau ratio have a mediating role in the relationship between the preoperative AST/ALT ratio and POD.

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

OBJECTIVE: To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook. METHODS: Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force. RESULTS: In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant. CONCLUSION Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals ; Bone Plates ; Clavicle/surgery* ; Swine ; Fractures, Stress/etiology* ; Female ; Risk Factors ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Biomechanical Phenomena ; Bone Density

Objective:To report the nationwide surveillance results of pathogenic profiles and antimicrobial resistance patterns of Gram-positive bloodstream infections in China in 2023.Methods:The clinical isolates of Gram-posttive bacteria from blood cultures were collected in member hospitals of National Bloodstream Infection Bacterial Resistant Investigation Collaborative System（BRICS）during January to December 2023. Antimicrobial susceptibility testing was performed using the dilution method recommended by the Clinical and Laboratory Standards Institute（CLSI）. Statistical analyses were conducted using WHONET 5.6 and SPSS 25.0 software.Results:A total of 4 385 Gram-positive bacterial isolates were obtained from 60 participating center. The top five pathogens were Staphylococcus aureus（ n=1 544，35.2%），coagulase-negative Staphylococci（ n=1 441，32.9%）， Enterococcus faecium（ n=574，13.1%）， Enterococcus faecalis（ n=385，8.8%），and α-hemolytic Streptococci（ n=187，4.3%）. The prevalence of methicillin-resistant Staphylococcus aureus（MRSA）and methicillin-resistant coagulase-negative Staphylococci（MRCNS）was 26.2%（405/1 544）and 69.8%（1 006/1 441），respectively. Notably，all Staphylococci remained susceptible to glycopeptide or daptomycin. Staphylococcus aureus demonstrated excellent susceptibility（>97.0%）to cephalobiol，rifampicin，trimethoprim-sulfamethoxazole，linezolid，minocycline，tigecycline，and eravacycline. No Enterococcus exhibiting resistance to linezolid were detected. Glycopeptide resistance was uncommon but more frequent in Enterococcus faecium（resistance to vancomycin and teicoplanin：both 1.7%）compared to Enterococcus faecalis（both 0.3%）. The detection rates of MRSA and MRCNS exhibited significant regional variations across the country（ χ2=17.674 and 148.650，respectively，both P<0.001）. No vancomycin-resistant Enterococci were detected in central China. Institutional comparison demonstrated higher prevalence of MRSA（ χ2=14.111， P<0.001）and MRCNS（ χ2=4.828， P=0.028）in provincial hospitals than that in municipal hospitals. Socioeconomic analysis identified elevated detection rates of both MRSA（ χ2=18.986， P<0.001）and MRCNS（ χ2=4.477， P=0.034）in less developed regions（per capita GDP