ObjectiveTo construct a risk prediction model for frequent acute exacerbations of chronic obstructive pulmonary disease （COPD） under disease-syndrome combination， thus providing decision support for precise clinical intervention. MethodsA total of 2 029 patients with acute exacerbations of COPD admitted to the First Affiliated Hospital of Anhui University of Chinese Medicine from January 2020 to August 2024 were retrospectively included. These patients were classified into groups of frequent acute exacerbations （≥2 times/year） and infrequent acute exacerbations （<2 times/year） according to the hospitalization times per year. Risk factors were screened by LASSO regression combined with logistic regression， and a nomogram model was constructed. The model performance was assessed based on the area under the curve （AUC）， calibration curves， and decision curve analysis （DCA）. ResultsThe differences in baseline characteristics between the frequent acute exacerbations group （1 196 cases） and infrequent acute exacerbations group （833 cases） were not statistically significant. LASSO regression combined with multivariate logistic regression screened the following independent risk factors： body mass index （BMI）， hospitalization days， number of smoking years， place of residence， use of noninvasive ventilators， oxygen-demanding therapy， liver cirrhosis， use of systemic glucocorticosteroids， and traditional Chinese medicine syndrome （phlegm and stasis obstructing the lung）. The nomogram model showed good discrimination and calibration in both the training set （AUC=0.748） and validation set （AUC=0.774）. ConclusionThe risk prediction model for frequent acute exacerbations of COPD， integrating traditional Chinese medicine syndrome， constructed in this study has high accuracy. It can provide a scientific basis for early clinical identification of high-risk patients and individualized intervention.

This article systematically reviews the current research status as well as diagnosis and treatment strategies of traditional Chinese medicine （TCM） for gastroesophageal reflux disease （GERD）. Studies demonstrate that TCM， based on the "disease-syndrome combination" approach， exhibits multi-target advantages in alleviating symptoms of various GERD subtypes， promoting mucosal repair， regulating emotions， and facilitating the reduction of western medication. To address clinical challenges such as symptom overlap and limited therapeutic efficacy， strategies have been proposed including "treating different diseases with the same method" and integrated regulation based on viscera correlation. Future efforts should focus on elucidating the mechanisms of compound prescriptions， promoting TCM drug development under the "three-combination" evaluation framework that integrates TCM theory， human experience and clinical trial evidence， and optimizing integrated traditional and western medicine models to enhance GERD management.

ObjectiveTo establish a reliable chronic obstructive pulmonary disease (COPD) mouse model based on a self-developed multichannel automatic control system for long-term continuous cigarette smoke exposure in small animals using a novel continuous cigarette smoke exposure method, and to conduct phenotypic evaluation and analysis, thereby providing an animal experimental basis for investigating COPD pathogenesis and prevention strategies. MethodsTwenty male C57BL/6J mice aged 6 weeks were randomly and equally divided into a control group and a model group. The model group (n=10) underwent 6 h of continuous cigarette smoke exposure daily (6 cigarettes per day for 12 consecutive weeks), while the control group (n=10) received no intervention. Body weight was monitored biweekly. Post-exposure, in vivo micro-CT imaging was performed. After euthanasia, serum and bronchoalveolar lavage fluid (BALF) levels of interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α) were quantified by ELISA. Lung tissues underwent H&E and Masson's trichrome staining to observe changes in lung morphology and inflammatory cell infiltration, and the mean linear intercept (MLI) was calculated, thereby comprehensively evaluating the clinical features of COPD in the mouse model. ResultsCompared with the control group, the model group showed significantly reduced body weight (P<0.01) from the fourth week. Compared with the control group, IL-6 level in the serum and BALF of the model group increased by 27.2% and 140.0%, respectively (P<0.01). TNF-α level in the serum and bronchoalveolar lavage fluid of the model group increased by 16.7% (P<0.01) and 19.3% (P<0.05), respectively. Histopathological examination revealed alveolar wall thinning, septal rupture, emphysematous bullae formation, reduced alveolar count, bronchial wall thickening with lumen narrowing, and inflammatory cell infiltration. MLI was significantly elevated (P<0.01). Masson's staining confirmed collagen deposition and bronchial remodeling. Micro-CT demonstrated localized high-density shadows exhibiting typical features of chronic bronchitis. Conclusion The self-developed device enables long-term continuous smoke exposure, and the successfully established COPD mouse model exhibits pathological features highly consistent with clinical manifestations, offering an efficient and reliable tool for COPD research.

As the core vehicle for preserving and transmitting traditional Chinese medicine（TCM） academic thought and clinical experience， the establishment of a robust quality evaluation system for TCM clinical case reports is a crucial component in the current standardization and modernization of TCM. Based on the practical experience of constructing the China Clinical Cases Library of Traditional Chinese Medicine by the China Association of Chinese Medicine， this study conducted a comprehensive analysis of critical challenges， including insufficient authenticity and unfocused evaluation criteria. It proposed a three-dimensional evaluation framework grounded in the structure-process-outcome logic， encompassing three dimensions of authenticity and standardization， characteristics and advantages， application and translational impact. This framework integrated 12 key evaluation indicators in a systematic manner. The model preserved the academic characteristics of TCM syndrome differentiation and treatment， while aligning with modern scientific research standards， achieving a balance between individualized TCM experience and standardized evaluation. Concurrently， this study provided theoretical foundations and methodological guidance for evaluating the quality of TCM clinical cases， contributing significantly to the inheritance of TCM knowledge， evidence-based practice， and the reform of talent evaluation mechanisms.

ObjectiveTo introduce visual teaching into the course design of medical humanistic care based on the concept of implementation science， evaluate the teaching implementation effect and feedback， and provide references for optimizing course teaching outcomes and improving students’ humanistic care competence. MethodsA visual teaching program for medical humanistic care was designed， with key steps including clarifying teaching objectives， content， methods， and curriculum assessment. This program was implemented in the medical humanistic care course teaching involving 50 elective students. Multi-dimensional evaluation of teaching effectiveness was conducted through course grades， visual teaching evaluation， and humanistic workshop assessment， combined with inductive content analysis of students’ learning experiences in the workshops. ResultsThe 50 students achieved above-average course grades （89.60±3.41） and demonstrated high satisfaction with the overall course and visual teaching. All the 6 groups obtained relatively high scores in the medical humanistic care workshops. Four themes were extracted， namely， enhancing humanistic care competencies， deepening familial and interpersonal relationships， realizing emotional expression and self-growth， and strengthening integration of humanistic care concepts with practice. ConclusionThe teaching of medical humanistic care course has achieved favorable effects， which contributes to deepening students’ understanding of humanistic care and enhancing their humanistic care competence. Students demonstrate high levels of recognition and satisfaction with the course.

BACKGROUND:Fixed-point rotation manipulation of cervical spine is a mechanical operation with high technical requirements,but the biomechanics of fixed-point manipulation of cervical spine still lacks relevant quantitative data.Moreover,the research on the influencing factors of cervical fixed-point rotation manipulation includes many parameters and there are differences,so it is necessary to further analyze its influencing factors to improve its related data. OBJECTIVE:To quantify the biomechanical parameters of cervical spine fixed-point rotation manipulation,explore the correlation between different biomechanical parameters,and the influence of individual characteristics of the subjects on the biomechanical parameters of cervical spine fixed-point rotation manipulation. METHODS:Totally 35 cases of cervical spondylosis were Outpatients from Orthopedic Department of Renai Branch of the First Affiliated Hospital of Guangxi University of Chinese Medicine and selected as the subjects investigated.Wearable mechanical measuring gloves were used to collect biomechanical parameters of cervical spine fixed-point rotation manipulation,including:thumb preload,thumb maximum thrust,palm preload,palm wrench force,and palm wrench maximum force.Personal characteristic parameters were collected,including age,height,weight,and neck circumference.The key biomechanical parameters in the process of cervical spine fixed-point rotation manipulation were analyzed and different individual characteristics were quantified.The results of biomechanical parameters were analyzed using Spearman correlation analysis.The possible effects of different individual characteristic parameters on biomechanics were analyzed. RESULTS AND CONCLUSION:(1)Compared with bilateral mechanical parameters,there was no significant difference between left manipulation and right manipulation(P>0.05).(2)The average of thumb preload force was(7.21±1.19)N;the average of thumb maximum thrust was(28.40±4.48)N;the average of palm preload was(5.67±2.49)N;the average of palm wrench force was(10.90±5.11)N,and the average of palm wrench maximum force was(16.00±7.27)N.(3)There was a significant positive correlation between palm preload and palm wrench force(Rs=0.812,P<0.01).There was a significant positive correlation between palm preload and palm wrench maximum force(Rs=0.773,P<0.01).There was a significant positive correlation between palm wrench force and palm wrench maximum force(Rs=0.939,P<0.01).(4)The weight was positively correlated with thumb preload,palm preload,palm wrench force and palm wrench maximum force(P<0.05).(5)These findings confirm that there is a certain biomechanical standard value in the operation of cervical spine fixed-point rotation manipulation to treat cervical spondylosis.There is no significant difference between the left and right manipulations,which indicates that the manipulation has good consistency and repeatability.There is consistency and coordination among palm preload force,palm wrench force,and palm wrench maximum force.Their contributions to the therapeutic effect are similar.Body weight is an important factor affecting cervical spine fixed-point rotation manipulation.

BACKGROUND:Degenerative scoliosis is defined as a condition that occurs in adulthood with a coronal cobb angle of the spine>10° accompanied by sagittal deformity and rotational subluxation,which often produces symptoms of spinal cord and nerve compression,such as lumbar pain,lower limb pain,numbness,weakness,and neurogenic claudication.The finite element method is a mechanical analysis technique for computer modelling,which can be used for spinal mechanics research by building digital models that can realistically restore the human spine model and design modifications. OBJECTIVE:To review the application of finite element method in the etiology and treatment of degenerative scoliosis. METHODS:The literature databases CNKI,PubMed,and Web of Science were searched for articles on the application of finite element method in degenerative scoliosis published before October 2023.Search terms were"finite element analysis,biomechanics,stress analysis,degenerative scoliosis,adult spinal deformity"in Chinese and English.Fifty-four papers were finally included. RESULTS AND CONCLUSION:(1)The biomechanical findings from the degenerative scoliosis model constructed using the finite element method were identical to those from the in vivo experimental studies,which proves that the finite element method has a high practical value in degenerative scoliosis.(2)The study of the etiology and treatment of degenerative scoliosis by the finite element method is conducive to the prevention of the occurrence of the scoliosis,slowing down the progress of the scoliosis,the development of a more appropriate treatment plan,the reduction of complications,and the promotion of the patients'surgical operation.(3)The finite element method has gradually evolved from a single bony structure to the inclusion of soft tissues such as muscle ligaments,and the small sample content is increasingly unable to meet the research needs.(4)The finite element method has much room for exploration in degenerative scoliosis.

BACKGROUND:In recent years,numerous studies have shown that autophagy and mitophagy play an important role in the regulation of bone metabolism.Under non-physiological conditions,mitophagy breaks the balance of bone metabolism and triggers metabolism disorders,which affect osteoblasts,osteoclasts,osteocytes,chondrocytes,bone marrow mesenchymal stem cells,etc. OBJECTIVE:To summarize the mechanism of mitophagy in regulating bone metabolic diseases and its application in clinical treatment. METHODS:PubMed,Web of Science,CNKI,WanFang and VIP databases were searched by computer using the keywords of"mitophagy,bone metabolism,osteoblasts,osteoclasts,osteocytes,chondrocytes,bone marrow mesenchymal stem cells"in English and Chinese.The search time was from 2008 to 2023.According to the inclusion criteria,90 articles were finally included for review and analysis. RESULTS AND CONCLUSION:Mitophagy promotes the generation of osteoblasts through SIRT1,PINK1/Parkin,FOXO3 and PI3K signaling pathways,while inhibiting osteoclast function through PINK1/Parkin and SIRT1 signaling pathways.Mitophagy leads to bone loss by increasing calcium phosphate particles and tissue protein kinase K in bone tissue.Mitophagy improves the function of chondrocytes through PINK1/Parkin,PI3K/AKT/mTOR and AMPK signaling pathways.Modulation of mitophagy shows great potential in the treatment of bone diseases,but there are still some issues to be further explored,such as different stages of drug-activated mitophagy,and the regulatory mechanisms of different signaling pathways.

Background Due to the unique working environment and numerous occupational disease hazards, workers in mining industry are particularly susceptible to psychological problems such as occupational stress. Objective To understand the current status of occupational stress, depressive symptoms, anxiety symptoms and sleep quality of workers in ferrous and non-ferrous metal mining industry in Gansu Province, and to explore the effects of occupational stress on depressive symptoms, anxiety symptoms, and sleep. Methods From April to December 2022, the workers of 25 large, medium, and small and micro enterprises were selected by stratified cluster random sampling and surveyed in ferrous and non-ferrous metal mining industry in Gansu Province. The Occupational Health Literacy Questionnaire of National Key Population, Core Occupational Stress Scale, Patient Health Questionnaire-q, Generalized Anxiety Disorder, and Self-administer Sleep Questionnaire were used to collect basic information, occupational stress, depressive symptoms, anxiety symptoms, and sleep quality of the workers. Chi-square test was used to compare occupational stress, depressive symptoms, anxiety symptoms and sleep disorders among different categories. Logistic regression model was used to study the effects of occupational stress on depressive symptoms, anxiety symptoms, and sleep quality. Results In this study, 2192 workers in mining industry were surveyed, of which 2087 returned valid questionnaires, and the recovery rate of valid questionnaires was 95.2%. Among them, 728 (38.4%) reported occupational stress. There were statistically significant differences in the positive rate of occupational stress among workers by gender, age, marital status, education level, average monthly income, length of service, enterprise size, and night shifts (P<0.001). The positive rates of depressive symptoms, anxiety symptoms, and sleep disorders in the mining industry workers were 85.6%, 49.8%, and 47.3%, respectively. The positive rates of depressive symptoms, anxiety symptoms, and sleep disorders among workers with higher occupational stress were higher than those among workers without occupational stress (P<0.001). The logistic regression analysis showed that occupational stress was a common risk factor for depressive symptoms (OR=3.29, 95%CI: 2.26, 4.79), anxiety symptoms (OR=2.87, 95%CI: 2.33, 3.53), and sleep disorder (OR=1.78, 95%CI: 1.46, 2.16). In addition, length of service and enterprise-scale were also risk factors for depressive symptoms, anxiety symptoms, and sleep disorders. In the 5−<10 and 10−<20 years of service groups, the risks of reporting depressive symptoms were 1.80 (95%CI: 1.18, 2.74) and 1.73 (95%CI: 1.10, 2.71) times higher than that of workers with less than 1 year of service, respectively; the risks of reporting anxiety symptoms were 1.98 (95%CI: 1.42, 2.76) and 2.11 (95%CI: 1.48, 3.01) times higher than that with less than 1 year of service, respectively; the risks of reporting sleep disorders were 1.58 (95%CI: 1.15, 2.16) and 1.78 (95%CI: 1.29, 2.45) times higher than that with less than 1 year of service, respectively. Workers in large enterprises were inclined to report more depressive symptoms, anxiety symptoms, and sleep disturbances than those in micro and small enterprises (OR=3.53, 95%CI: 2.41, 5.16; OR=2.49, 95%CI: 1.98, 3.13; OR=2.10, 95%CI: 1.67, 2.62). Conclusion The occupational stress level of mining industry workers in Gansu Province is high, and reporting occupational stress, 5−<10 and 10−<20 working age groups, and large enterprises are important risk factors affecting workers' mental health and sleep. It is necessary to increase the attention and develop intervention programs for mental health of miners in the working age group of 5−20 years old and in large enterprises.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.