OBJECTIVE: To evaluate the effectiveness of correcting post-traumatic equinovarus deformity using Ilizarov external fixation technique combined with limited osteotomy. METHODS: A retrospective analysis was conducted on clinical data from 29 patients with post-traumatic equinovarus deformity treated between July 2018 and March 2023. The cohort included 18 males and 11 females, with ages ranging from 15 to 57 years (mean, 24.3 years). All patients exhibited ankylosed ankle joints with equinovarus deformity. During surgery, external fixators were installed according to Ilizarov pinning principles, and minimally invasive osteotomy was performed at the ankle joint. Concurrently, soft tissue release was achieved via minimally invasive Achilles tendon lengthening. Postoperatively, multiplanar deformity correction was accomplished through gradual adjustment of the external fixator. The fixator was removed after bony union at the osteotomy site, followed by bracing. The surgical duration, intraoperative blood loss, fixator wear time, and complications were recorded. Postoperative outcomes included assessment of deformity correction and bony union at the osteotomy site. Functional improvement and pain relief were evaluated using pre- and post-operative scores from the American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot score and visual analogue scale (VAS) score. RESULTS: All 29 patients were followed up 12-24 months (mean, 18 months). The mean surgical duration was 85.6 minutes, with a mean intraoperative blood loss of 110 mL. Full deformity correction was achieved within 26-80 days (mean, 40.7 days) through progressive fixator adjustments. At correction completion, all ankles restored to a neutral or 5°-10° dorsiflexed position with plantigrade foot function. Superficial pin tract infections occurred in 3 patients (10.3%), resolved with local wound care, enhanced nursing, and oral antibiotics. No deep or systemic infections was observed. One patient sustained a calcaneal half-pin fracture due to a fall during fixator wear, but no bone fragment displacement occurred. No vascular or neurological complication was reported. Complete bony union was achieved at all osteotomy sites without nonunion. At last follow-up, the AOFAS ankle-hindfoot score improved from preoperative 42.7±8.7 to postoperative 65.7±9.3, and the VAS score decreased from preoperative 4.5±1.3 to postoperative 2.5±1.1, with significant differences ( P<0.05). Functional outcomes were rated as excellent in 14 cases, good in 13 cases, fair in 1 case, and poor in 1 case, with an excellent and good rate of 93.1%. CONCLUSION The progressive correction strategy combining Ilizarov external fixation technique with limited foot osteotomy effectively corrects post-traumatic equinovarus deformity while preserving soft tissue integrity. This method is associated with minimal, largely controllable complications and achieves alignment stability and fusion outcomes comparable to traditional open surgery, making it an effective treatment for complex foot and ankle deformities.
Humans ; Male ; Female ; Osteotomy/methods* ; Adult ; Retrospective Studies ; Ilizarov Technique ; Middle Aged ; Adolescent ; External Fixators ; Young Adult ; Treatment Outcome ; Ankle Joint/surgery* ; Clubfoot/etiology* ; Minimally Invasive Surgical Procedures/methods*

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To evaluate the effect of neuromuscular and vascular electrical stimulation in the treatment of postpartum diastasis recti abdominis.Methods:Adopting a prospective research approach, 100 patients with postpartum diastasis recti abdominis in Dalian Women and Children′s Medical Group from January 2020 to June 2023 were selected. The patients were divided into control group and observation group according to the random digits table method, with 50 cases in each group. The patients in control group were treated with neuromuscular electrical stimulation, and the patients in observation group were treated with vascular electrical stimulation. In curled abdominal position, the separation distance of recti abdominis 3 cm above the umbilicus, parallel umbilicus and 2 cm below the umbilicus before and after treatment, and the recovery rate (separation distance of recti abdominis after treatment ≤ 2 cm) were compared between the two groups.Results:In curled abdominal position, there were no statistical difference in separation distance of recti abdominis 3 cm above the umbilicus and 2 cm below the umbilicus before treatment between the two groups ( P>0.05); the separation distance of recti abdominis parallel umbilicus before treatment in observation group was significantly larger than that in control group: (35.26 ± 6.13) mm vs. (30.06 ± 6.18) mm, and there was statistical difference ( P<0.01). After treatment, the separation distance of recti abdominis 3 cm above the umbilicus, parallel umbilicus and 2 cm below the umbilicus in both two group was significantly reduced, the improvement in the observation group was significantly better than that in the control group: (24.33 ± 4.78) mm vs. (26.79 ± 5.77) mm, (16.38 ± 4.52) mm vs. (20.48 ± 4.50) mm and (15.34 ± 5.16) mm vs. (18.03 ± 7.27) mm, there were statistical differences ( P<0.01 or <0.05). The recovery rate in observation group was significantly higher than that in control group: 92.0% (46/50) vs. 74.0% (37/50), and there was statistical difference ( χ2 = 5.74, P<0.05). Conclusions:Both neuromuscular and vascular electrical stimulation can promote the healing of postpartum diastasis recti abdominis, and the therapeutic effect of vascular electrical stimulation is better than that of neuromuscular electrical stimulation.

Osteochondral lesions of the talus (OLT) was defined as lesions involving the articular cartilage and subchondral bone of the talus. The most common cause of OLT is trauma including ankle sprains and fractures, while other causes include non-traumatic factors such as chronic ankle injuries. The diagnosis of OLT is made by combining the patient′s medical history, symptoms and signs, and imaging studies such as X-ray, CT and MRI. Microfracture(MF) is the gold standard of treatment for injuries smaller than 150 mm 2, and while different drill diameters and depths have different effects on outcomes. The overall long-term outcome of MF is of concern. The choice of various restorative or rehabilitative procedures based on the patients’ symptoms, lesion size and staging, as well as the combination with arthrocentesis biotherapy, is a new trend in the treatment of OLT. In addition, for OLT combined with chronic lateral ankle instability(CLAI), ankle impingement or lower limb malalignment, one-stage combined treatment will improve the prognosis of patients. The coming of a new kind of material and a technique, such as hydrogel or organoids, makes a bright future foreseeable.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

[Objective]To investigate the effect and mechanism of Shuxuetong and its main component hirudin on the apoptosis of cerebellar granule neurons(CGNs)in Sprague-Dawley(SD)rats.[Methods]CGNs incubated in vitro for 7 days were divided into survival control group or 25 K group(cultured in medium containing 25 mmol/L KCL)and apopto-sis group or 5 K group(cultured in medium containing 5 mmol/L KCL).CGNs were separately treated with proportionally diluted and different concentrations of Shuxuetong(1/50,1/40,1/30,1/20 and 1/10)and the corresponding different con-centrations of hirudin(2,2.5,3.34,5 and 10 U/mL).Hoechst staining was performed to analyze the apoptosis.Western blot was used to detect the expression levels of Cleaved Caspase-3,Bim and VEGF.[Results]Hoechst staining showed that 5 K group had a higher apoptosis rate than 25 K group.In 25 K group,there was no significant change in the apoptosis rate between neurons treated with different concentrations of Shuxuetong and hirudin,but significant changes was found in 5 K group and the higher the concentration,the lower the apoptosis rate.Western blot results revealed that,compared with control neurons in 5 K group,Shuxuetong injection and hirudin treatments resulted in a decrease of Cleaved Caspase-3 and Bim expression,but an increase of VEGF protein.[Conclusions]Shuxuetong and its main component hirudin inhibits the apoptosis of CGNs through suppressing proapoptotic BH3-only protein Bim.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

Bone organoids can simulate the complex structure and function of the bone tissues, which makes them a frontier technology in organoid researches. Bone organoids show a tremendous potential of applications in bone disease modeling, bone injury repair, and medicine screening. Although advancements have been made so far in constructing bone organoids with functional structures like mineralization, bone marrow, trabecular bone, callus, woven bone, etc, the researches in this field are confronted with numerous challenges such as lack of standardized construction strategies and unified evaluation criteria, which limits their further promotion and application. To standardize researches in bone organoids, the Orthopedic Expert Committee of Geriatric Branch of Chinese Association of Gerontology and Geriatrics, the Youth Osteoporosis Group of Orthopedic Branch of Chinese Medical Association, the Osteoporosis Group of Orthopedic Surgeon Branch of Chinese Medical Doctor Association, and the Osteoporosis Committee of Shanghai Association of Integrated Traditional Chinese and Western Medicine organized related experts to formulate Expert consensus on the construction, evaluation, and application of bone organoids ( version 2024) based on an evidence-based approach. A total of 17 recommendations were put forth, aiming to standardize researches and clinical applications of bone organoids and enhance their value in scientific research and clinical practice.

Humans ; Asthma/drug therapy* ; Biological Therapy

Objective:To investigate the efficacy of osteochondral fragment fixation using bioabsorbable pins for Hepple Ⅱ osteochondral lesions of the talus (OLT) in adolescents.Methods:Retrospective case analysis was used. The clinical data and follow-up results of 13 adolescent patients (13 feet) with Hepple Ⅱ OLT were all treated with osteochondral fragment fixation using bioabsorbable pins admitted to Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2017 to December 2021 were retrospectively analyzed. There were 7 males and 6 females, with 13 right feet. The age was (14.85±2.23) years old, ranged from 12 to 18 years old. According to the American orthopedic foot and ankle society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) and SF-36 score before operation and at the last follow-up were used to evaluate the efficacy and function of the patients. Measurement data with normal distribution were represented as mean ± standard deviation( ± s), and the comparison between groups was conducted using the t-test; The mearsurement data with skewness distribution were expressed by M( Q1, Q3), and rank-sum test was used for inter-group comparison. Results:Thirteen adolescent patients (13 feet) with Hepple Ⅱ OLT underwent surgery successfully and were followed up for (25.54±9.95) months. All wounds healed by first intention, and no complications such as wound infection and delayed healing occurred. Preoperative AOFAS ankle-posterior foot score, VAS and SF-36 score were 58.62±3.55, 7.00 (6.50, 8.00) and 68.38±4.81, respectively. At the last follow-up, the scores were 97.38±2.73, 1.00 (0.00, 1.00), 91.15±4.28, respectively, and the results were significantly improved at the last follow-up, with the difference between the two groups statistically significant( P<0.05). Conclusion:Osteochondral fragment fixation using bioabsorbable pins which can promote cartilage repair, significantly improve symptoms, and achieve better clinical satisfaction with fewer complications, is a safe and effective surgical treatment option for Hepple Ⅱ OLT in adolescents with satisfactory short-term clinical outcomes.