Objective To optimize the extraction process of total phenolic acids from Cibotii rhizoma using Box-Behnken design-response surface methodology and evaluate antioxidant activity of total phenolic acid in vitro.Methods Taking the liquid-solid ratio,ethanol concentration and extraction temperature as influencing factors,and the extraction rate of total phenolic acids as evaluation indicator,the extraction process of total phenolic acids from Cibotii rhizoma was optimized using a three-factor and three-level Box-Behnken design-response surface methodology on the basis of single factor tests.Meanwhile,the scavenging effects of total phenolic acid extract from Cibotii rhizoma on ABTS·+and DPPH· was determined.Results The optimized extraction process for total phenolic acids from Cibotii rhizoma was as follows:the ethanol concentration of 55％,the extraction temperature of 88℃ and the liquid-solid ratio of 60∶1 mL/g.Under these conditions,the extraction rate could reach 8.67％.When the mass concentration of total phenolic acids extract were 2 mg/mL and 1 mg/mL,the clearance rates of ABTS·+and DPPH·were 92.76％and 88.66％,respectively.Conclusion The theoretical values obtained from the response surface optimization method are consistent with the actual measured values,and the extraction process of total phenolic acids from Cibotii rhizoma was simple and feasible.The total phenolic acids extract from Cibotii rhizoma exhibit strong antioxidant activity in vitro.

Cibotii Rhizoma has a long history of folk usage and clinical applications,which is commonly used to treat symptoms such as waist and knee soreness,numbness of hands and feet.Its chemical components mainly include sugars and glycosides,aromatics,volatile oils,pterosins,flavonoids,steroids,pyranones,amino acids and inorganic elements.Pharmacological studies have shown that Cibotii Rhizoma has antioxidant,anti-inflammatory,anti-osteoporosis,gastrointestinal protection,antibacterial,liver protection,anticancer,analgesic and other effects.This paper systematically reviews the research status of chemical constituents,pharmacological effects and quality control of Cibotii Rhizoma,which provides reference for the development and rational use of Cibotii Rhizoma.

Objective: To investigate the effects of human umbilical cord mesenchymal stem cells (hUCMSCs) combined with autologous Meek microskin transplantation on patients with extensive burns. Methods: The prospective self-controlled study was conducted. From May 2019 to June 2022, 16 patients with extensive burns admitted to the 990^th Hospital of PLA Joint Logistics Support Force met the inclusion criteria, while 3 patients were excluded according to the exclusion criteria, and 13 patients were finally selected, including 10 males and 3 females, aged 24-61 (42±13) years. A total of 20 trial areas (40 wounds, with area of 10 cm×10 cm in each wound) were selected. Two adjacent wounds in each trial area were divided into hUCMSC+gel group applied with hyaluronic acid gel containing hUCMSCs and gel only group applied with hyaluronic acid gel only according to the random number table, with 20 wounds in each group. Afterwards the wounds in two groups were transplanted with autologous Meek microskin grafts with an extension ratio of 1∶6. In 2, 3, and 4 weeks post operation, the wound healing was observed, the wound healing rate was calculated, and the wound healing time was recorded. The specimen of wound secretion was collected for microorganism culture if there was purulent secretion on the wound post operation. In 3, 6, and 12 months post operation, the scar hyperplasia in wound was assessed using the Vancouver scar scale (VSS). In 3 months post operation, the wound tissue was collected for hematoxylin-eosin (HE) staining to observe the morphological changes and for immunohistochemical staining to observe the positive expressions of Ki67 and vimentin and to count the number of positive cells. Data were statistically analyzed with paired samples t test and Bonferronni correction. Results: In 2, 3, and 4 weeks post operation, the wound healing rates in hUCMSC+gel group were (80±11)%, (84±12)%, and (92±9)%, respectively, which were significantly higher than (67±18)%, (74±21)%, and (84±16)% in gel only group (with t values of 4.01, 3.52, and 3.66, respectively, P<0.05). The wound healing time in hUCMSC+gel group was (31±11) d, which was significantly shorter than (36±13) d in gel only group (t=-3.68, P<0.05). The microbiological culture of the postoperative wound secretion specimens from the adjacent wounds in 2 groups was identical, with negative results in 4 trial areas and positive results in 16 trial areas. In 3, 6, and 12 months post operation, the VSS scores of wounds in gel only group were 7.8±1.9, 6.7±2.1, and 5.4±1.6, which were significantly higher than 6.8±1.8, 5.6±1.6, and 4.0±1.4 in hUCMSC+gel group, respectively (with t values of -4.79, -4.37, and -5.47, respectively, P<0.05). In 3 months post operation, HE staining showed an increase in epidermal layer thickness and epidermal crest in wound in hUCMSC+gel group compared with those in gel only group, and immunohistochemical staining showed a significant increase in the number of Ki67 positive cells in wound in hUCMSC+gel group compared with those in gel only group (t=4.39, P<0.05), with no statistically significant difference in the number of vimentin positive cells in wound between the 2 groups (P>0.05). Conclusions: The application of hyaluronic acid gel containing hUCMSCs to the wound is simple to perform and is therefore a preferable route. Topical application of hUCMSCs can promote healing of the autologous Meek microskin grafted area in patients with extensive burns, shorten wound healing time, and alleviate scar hyperplasia. The above effects may be related to the increased epidermal thickness and epidermal crest, and active cell proliferation.
Female ; Humans ; Male ; Burns/surgery* ; Cicatrix ; Eosine Yellowish-(YS) ; Hyaluronic Acid/therapeutic use* ; Hyperplasia ; Ki-67 Antigen ; Prospective Studies ; Umbilical Cord ; Vimentin ; Young Adult ; Adult ; Middle Aged

The quality of moxa is an important factor affecting moxibustion therapy, and traditionally, 3-year moxa is considered optimal, although scientific data are lacking. This study focused on 1-year and 3-year moxa from Artemisia stolonifera and A. argyi(leaf-to-moxa ratio of 10∶1) as research objects. Scanning electron microscopy(SEM), Van Soest method, and simultaneous thermal analysis were used to investigate the differences in the combustion heat quality of 1-year and 3-year moxa and their influencing factors. The results showed that the combustion of A. stolonifera moxa exhibited a balanced heat release pattern. The 3-year moxa released a concentrated heat of 9 998.84 mJ·mg~(-1)(accounting for 54% of the total heat release) in the temperature range of 140-302 ℃, with a heat production efficiency of 122 mW·mg~(-1). It further released 7 512.51 mJ·mg~(-1)(accounting for 41% of the total heat release) in the temperature range of 302-519 ℃. The combustion of A. argyi moxa showed a rapid heat release pattern. The 3-year moxa released a heat of 16 695.28 mJ·mg~(-1)(accounting for 70% of the total heat release) in the temperature range of 140-311 ℃, with an instantaneous power output of 218 mW·mg~(-1). It further released 5 996.95 mJ·mg~(-1)(accounting for 25% of the total heat release) in the temperature range of 311-483 ℃. Combustion parameters such as-R_p,-R_v, D_i, C, and D_b indicated that the combustion heat quality of 3-year moxa was superior to that of 1-year moxa. It exhibited greater combustion heat, heat production efficiency, flammability, mild and sustained burning, and higher instantaneous combustion efficiency. This study utilized scientific data to demonstrate that A. stolonifera could be used as excellent moxa, and the quality of 3-year moxa surpassed that of 1-year moxa. The research results provide a scientific basis for the in-depth development of A. stolonifera moxa and the improvement of moxa quality standards.
Artemisia ; Hot Temperature ; Moxibustion ; Plant Leaves

The purpose of this study was to analyze the effects of shading intensity on the growth, yield, and quality of Artemisia stolonifera so as to provide references for the artificial cultivation of A. stolonifera. The seedlings of A. stolonifera with consistent growth underwent shading treatment at four shading intensity levels(0, 55%, 85%, and 95%) with different layers of black shading nets. The agronomic indexes, yield, moxa yield, total ash, quality characteristics of moxa during combustion and pyrolysis, main volatile components, flavonoids, and phenolic acids were measured. The results showed that under shading conditions, the stem diameter, leaf width, 5-leaf spacing, branch number, and yield of A. stolonifera decreased significantly, while the plant height, leaf length, leaf number, chlorophyll content, and moxa yield increased first and then decreased with the increase in shading intensity. The burning performance of moxa under natural light was better than that under moderate and severe shading conditions. The content of eucalyptol first increased and then decreased with the increase in shading intensity. The humulene content was negatively correlated with shading intensity. Other major volatile components showed no significant difference under various shading conditions. The content of neochlorogenic acid, cryptochlorogenic acid, isoschaftoside, and isochlorogenic acid B was positively correlated with shading intensity, while the content of chlorogenic acid, isochlorogenic acid A, and isochlorogenic acid C decreased first and then increased with the increase in shading intensity. To sum up, A. stolonifera is a light-loving plant, and shading can greatly reduce the yield, the content of internal components, and the burning performance of moxa. It is the main reason why A. stolonifera is mainly distributed in the forest edge, open forest, roadside, and wasteland grass in the middle and high mountains in the wild. For artificial domestication and cultivation of A. stolonifera, it is better to select plots with sufficient light.

This paper aims to compare the difference of growth and quality between wild and cultivated Artemisia stolonifera, thereby providing references for further development and utilization of A. stolonifera. The wild and cultivated A. stolonifera from different altitudes were collected, and the agronomic characters, moxa yield, volatile components, flavonoids, and phenolic acids were determined. The results showed that the cultivated species were taller and stronger, with more leaves and branches, than the wild species. The moxa yield and combustion quality of wild products were higher than those of cultivated products. The content of main volatile components in cultivated products was higher than that in wild products. The content of flavonoids and phenolic acids in wild products was higher than that in cultivated products. At high altitude, the ignition performance, combustion persistence, comprehensive combustion performance, and heat release during combustion of the wild and cultivated A. stolonifera. were optimal. At middle altitude, the content of main characteristic volatile components and flavone phenolic acids in the leaves of the cultivated and wild A. stolonifera were the highest. At low altitude, the combustion quality and the content of the above components of the cultivated A. stolonifera decrease significantly. Considering the combustion quality and the content of the internal components of the leaf lint, the middle and high altitude areas are suitable for the artificial cultivation of A. stolonifera.
Artemisia ; Agriculture ; Flavonoids ; Plant Leaves ; Drugs, Chinese Herbal

The quality of moxa is a key factor affecting the efficacy of moxibustion. Traditional moxa grades are evaluated by the leaf-to-moxa ratio, but there is a lack of support from scientific data. Scanning electron microscopy(SEM), Image Pro Plus, Van Soest method, and stimultaneous thermal analysis(TGA/DSC) were used to characterize the scientific implication of the combustion differences between moxa with different leaf-to-moxa ratios(processed by crusher). The results showed that the median lengths from non-secretory trichomes(NSTs) of natural NSTs and moxa with leaf-to-moxa ratios of 3∶1, 5∶1, 10∶1, and 15∶1 were 542.46, 303.24, 291.18, 220.69, and 170.61 μm, respectively. The cellulose content of moxa increased significantly(P<0.05) with the increase in leaf-to-moxa ratio and the combustion parameters(T_i, t_i, D_i, C,-R_p,-R_v, S, D_b, and J_(total)) all showed an increasing trend. The correlation results showed that the burning properties of moxa(T_i,-R_v, t_i, and J_2) were significantly and positively correlated with cellulose content. NSTs with a length of 1-200 μm were significantly and positively correlated with J_2. NSTs with a length of 200-600 μm were significantly and positively correlated with J_1, T_(peak2), T_(peak1), and-R_v, and negatively correlated with J_(total), T_b, and t_b. As the leaf-to-moxa ratio increases, the NSTs in the moxa become shorter and the cellulose content increases, which is more conducive to ignition performance, heat release, and a milder, longer-lasting burn. The "NSTs-cellulose-TGA/DSC" quantitative evaluation method scientifically reveals the scientific connotation of the combustion of moxa with different leaf-to-moxa ratios and provides a scientific basis for the establishment of quality evaluation methods for moxa with different leaf-to-moxa ratios.
Trichomes ; Moxibustion ; Hot Temperature ; Plant Leaves

Three sesquiterpenoids were isolated and purified from the 95% ethanol extract of Atractylodis Macrocephalae Rhizoma by column chromatography on silica gel, Sephadex LH-20, ODS, and high-performance liquid chromatography(HPLC). Their chemical structures were identified on the basis of spectroscopic analysis and physiochemical properties as(7Z)-8β,13-diacetoxy-eudesma-4(15),7(11)-diene(1), 7-oxo-7,8-secoeudesma-4(15),11-dien-8-oic acid(2), and guai-10(14)-en-11-ol(3). Compounds 1 and 2 are new compounds and compound 3 was obtained from Compositae family for the first time. Compounds 1, 2, and 3 showed weak inhibitory activities against sterol regulatory element-binding proteins(SREBPs).
Atractylodes/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Rhizome/chemistry* ; Sesquiterpenes, Eudesmane/pharmacology* ; Sterol Regulatory Element Binding Proteins/antagonists & inhibitors*

Objective:To explore the effect of the wearing time of cervical collar on the rehabilitation of patients with anterior cervical discectomy and fusion (ACDF) .Methods:The data of 97 patients with cervical spondylosis who were admitted to the Neurosurgery Spine Group of Xuanwu Hospital of Capital Medical University and underwent 1-2 segment ACDF from January 2016 to December 2017 were retrospectively analyzed. According to the wearing time of cervical collar after operation, the patients were divided into 1-4 weeks group (39 cases) , 5-8 weeks group (22 cases) , and 9-12 weeks group (36 cases) .The scores of the Japanese Orthopaedic Association Score (JOA) , Axial Symptom Score (AS) , and Neck Disability Index (NDI) were compared among the three groups before operation and 3 months after operation.Results:The postoperative JOA scores of the three groups were improved compared with those before the operation, and the differences were statistically significant ( P<0.05) ; however, there was no significant difference among the three groups before operation and 3 months after operation ( P> 0.05) . Compared with preoperative, the postoperative AS scores in 1-4 weeks group and 5-8 weeks group has no significant difference ( P> 0.05) , but the AS score of the 9-12 weeks group decreased compared with that before operation, and the difference was statistically significant ( P< 0.05) . After operation, the difference of AS scores among three groups was statistically significant ( P< 0.05) . The postoperative NDI scores of the three groups were improved compared with those before operation, and the differences were statistically significant ( P<0.05) . The improved effect of NDI in the 5-8 weeks group was better than that in the 1-4 weeks group, and the difference was statistically significant ( P<0.05) . Conclusions:The incidence of axial symptoms in patients with 1-2 segment ACDF increases with the wearing time of cervical collar. The cervical collar wearing time for 5 to 8 weeks has the best effect, the patients have the lowest disability index, and did not significantly increase the patients ' axial symptoms.