ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

Objective To investigate the effectiveness of the integrated schistosomiasis control programme in Sichuan Province during the stage moving from transmission interruption to elimination (2015—2023), so as to provide insights into formulation of the schistosomiasis control measures during the post-elimination stage. Methods Schistosomiasis control data were retrospectively collected from departments of health, agriculture and rural affairs, forestry and grassland, water resources, and natural resources in Sichuan Province from 2015 to 2023, and a database was created to document examinations and treatments of human and livestock schistosomiasis, and snail survey and control, conversion of paddy fields to dry fields, ditch hardening, rivers and lakes management and building of forests for snail control and schistosomiasis prevention. The completion of schistosomiasis control measures was investigated, and the effectiveness was evaluated. Results A total of 20 545 155 person-times received human schistosomiasis examinations in Sichuan Province during the period from 2015 to 2023, and 232 157 person-times were seropositive, with a reduction in the seroprevalence from 2.10% (44 299/2 107 003) in 2015 to 1.12% (9 361/837 896) in 2023 (χ² = 7.68, P < 0.001). The seroprevalence of human schistosomiasis appeared a tendency towards a decline in Sichuan Province over years from 2015 to 2023 (b = −8.375, t = −10.052, P < 0.001); however, no egg positive individuals were identified during the period from 2018 to 2023, with the prevalence of human Schistosoma japonicum infections maintained at 0. Expanded chemotherapy was administered to 2 754 515 person-times, and medical assistance of advanced schistosomiasis was given to 6 436 persontimes, with the treatment coverage increasing from 46.80% (827/1 767) in 2015 to 64.87% (868/1 338) in 2023. Parasitological tests for livestock schistosomiasis were performed in 35 113 herd-times, and expanded chemotherapy was administered to 513 043 herd-times, while the number of fenced livestock decreased from 121 631 in 2015 to 103 489 in 2023, with a reduction of 14.92%. Snail survey covered 433 621.80 hm² in Sichuan Province from 2015 to 2023, with 204 602.81 hm² treated by chemical control and 4 637.74 hm² by environmental modifications. The area of snail habitats decreased from the peak of 5 029.80 hm² in 2016 to 3 709.72 hm² in 2023, and the actual area of snail habitats decreased from the peak of 8 585.48 hm² in 2016 to 473.09 hm² in 2023. The mean density of living snails remained low across the study period except in 2017 (0.62 snails/0.1 m²). Schistosomiasis control efforts by departments of agriculture and rural affairs in Sichuan Province included conversion of paddy fields to dry fields covering 153 346.93 hm², hardening of 6 110.31 km ditches, building of 70 356 biogas digesters, replacement of cattle with 227 161 sets of machines, and captive breeding of 21 161 070 livestock from 2015 to 2023, and the control efforts by departments of water resources included rivers and lakes management measuring 5 676.92 km and renovation of 2 331 irrigation areas, while the control efforts by departments of forestry and grassland included building of forests for snail control and schistosomiasis prevention covering 23 913.33 hm², renovation of snail control forests covering 8 720 hm² and newly building of shelterbelts covering 764 686.67 hm². All 63 endemic counties (cities and districts) had achieved the criterion for schistosomiasis elimination criteria in Sichuan Province by the end of 2023. Conclusion Following the integrated control efforts from 2015 to 2023, remarkable achievements have been obtained in the schistosomiasis control programme in Sichuan Province, with all endemic counties successfully attaining the schistosomiasis elimination target at the county level.

Objective To understand the sleep status in patients with Parkinson's disease (PD), and to explore its relationship with dyskinesia and negative emotions. Methods A total of 308 patients with PD who met the inclusion and exclusion criteria in the hospital from September 2022 to May 2024 were selected as the research subjects. The scores of sleep status [Pittsburgh Sleep Quality Index (PSQI)], dyskinesia [Simplified Fugl-Meyer Motor Assessment (FMA)] and negative emotions [Beck Anxiety Inventory (BAI), Beck Depression Inventory-II (BDI-II)] were analyzed, and the PSQI score was compared among patients with different demographic characteristics. Pearson correlation analysis was performed to analyze the correlation of sleep with dyskinesia and negative emotions in patients with PD. Results The total score of PSQI scale was (6.16±0.97) points in 308 PD patients, of which 208 cases (67.53%) were complicated with sleep disorders. The proportions of female, 61-75 years old, technical secondary school or below, disease course of 4 years and above, Hoehn-Yahr stage IV and unmarried status in the sleep disorder group were higher than those in the non-sleep disorder group (P<0.05). Compared with the non-sleep disorder group, the FMA score in the sleep disorder group was lower (P<0.05) while the BAI score and BDI-II score were higher (P<0.05). Pearson correlation analysis revealed that PSQI was negatively correlated with FMA (r=-0.489, P<0.05), and was positively correlated with BAI and BDI-II (r=0.476, 0.502, P<0.05). Conclusion The incidence rate of sleep disorders in PD patients is high. PSQI is negatively correlated with FMA, and is positively correlated with BAI and BDI-II.

Objective To explore the clinical efficacy of high hip center technique total hip arthroplasty(THA)for CroweⅡ and Ⅲ developmental dysplasia of hip(DDH)and severe hip osteoarthritis(HOA).Methods From January 2018 to Jan-uary 2020,74 patients with Crowe type Ⅱ and Ⅲ DDH and severe HOA were admitted,and 37 cases of anatomical hip center reconstruction were taken as control group,including 7 males and 30 females,aged from 42 to 65 years old with an average of(58.40±4.98)years old,body mass index(BMI)ranged from 18 to 29 kg·m-2 with an average of(23.02±2.21)kg·m-2.Thirty-seven routine high hip center technical reconstruction were performed as study group,including 5 males and 32 females,aged from 41 to 65 years old with an average of(57.31±5.42)years old,BMI ranged from 18 to 29 kg·m-2 with an average of(23.14±2.07)kg·m-2.The patients presented with hip pain,limited function and range of motion,and gait instability before surgery.All patients underwent THA,the control group underwent intraoperative anatomical hip center reconstruction,and the study group underwent intraoperative high hip joint reconstruction.The perioperative indicators of the two groups were com-pared.The hip joint function,balance function and gait of the patients were evaluated before surgery,3 months,6 months,and 12 months after surgery.The length difference of both lower limbs,horizontal distance of rotation center,vertical distance of ro-tation center and femoral eccentricity were measured before operation and 1 year after operation.The incidence of complica-tions in the two groups during the operation and postoperative follow-up was counted.Results The operation time of the study group was shorter than that of the control group,and the intraoperative blood loss was less than that of the control group(P＜0.05).After 12-months follow-up,1 was lost to followvup in study group and 2 were lost to follow-up in control group.The Har-ris scores and Berg balance scale(BBS),pace,stride frequency and single step length in the study group were higher than those in the control group at 3 months and 6 months after operation(P＜0.05);there was no statistically significant difference between the two groups in the indexes 12 months after operation(P＞0.05).The vertical distance of the center of rotation of the study group was greater than that of the control group 12 months after operation(P＜0.05),and there was no significant difference in the length difference of the lower limbs,the horizontal distance of the center of rotation,and the femoral eccentricity between two groups(P＞0.05).There were no complications in either group.Conclusion The long-term effects of TH A in patients with DDH and severe HO A were similar between the two central hip reconstruction methods,and the safety was good,and the high hip central reconstruction technique could shorten the operation time and reduce the amount of intraoperative blood loss.At the same time,it has certain advantages in early recovery of hip joint function,balance function and walking function of patients.

Objective:To investigate the effect of overexpression of T cell restricted intracellular antigen 1(TIA1)gene in M2-type tumor-associated macrophages(M2-TAMs)on invasion and migration of gastric cancer cells and its mechanism.Methods:Primary TAMs were extracted from gastric cancer tissues and induced to differentiate into M2-TAMs using IL-4 and IL-13.The TIA1 overex-pression plasmid(oe-TIA1)and its empty vector were transfected into M2-TAMs.The expression levels of TIA1 mRNA and protein were detected by qRT-PCR and Western blot.The expression levels of CD206 and CD163 were detected by flow cytometry.The levels of IL-10,TGF-β,VEGF-A and Arg-1 in cell culture supernatant were detected by ELISA.The transfected M2-TAMs were co-cultured with gastric cancer BGC-823 cells by Transwell co-cultivation system,and PI3K agonist 740Y-P was used to intervene in parallel.The cell migration ability was detected by scratch assay.Transwell assay was used to detect cell invasion ability.Protein expression levels of PI3K,p-PI3K,AKT,p-AKT,MMP-2 and MMP-9 in the cells were detected by Western blot.Results:①Compared with primary TAMs,the levels of CD206 and CD163 expression in M2-TAMs cells and IL-10,TGF-β,VEGF-A and Arg-1 in cell culture superna-tant were significantly increased(P<0.05),while the expression levels of TIA1 mRNA and protein were significantly decreased(P<0.05).Overexpression of TIA1 gene significantly decreased the expression levels of CD206 and CD163 in M2-TAMs and IL-10,TGF-β,VEGF-A and Arg-1 in cell culture supernatant(P<0.05).②Overexpression of TIA1 gene in M2-TAMs could significantly reduce the migration and invasion ability and the expression levels of p-PI3K/PI3K,p-AKT/AKT,MMP-2 and MMP-9 proteins in BGC-823 cells(P<0.05).③740Y-P could significantly reverse the inhibitory effects of overexpression of TIA1 gene in M2-TAMs on migration,inva-sion and PI3K/AKT signaling pathway of BGC-823 cells.Conclusion:Overexpression of TIA1 gene in M2-TAMs can affect the inva-sion and migration of gastric cancer cells by blocking the PI3K/AKT signaling pathway.