Objective The aim of this study was to investigate the correlation between the interaction of uric acid and inflammatory factors and hyperuricemia in overweight/obese patients. Methods The personnel with hyperuricemia who underwent physical examination in our hospital from September 2021 to September 2022 were selected as the study subjects, and they were divided into 100 cases of overweight group and 90 cases of obese group according to the BMI index; 120 cases of healthy and non-hyperuricemic personnel were randomly selected as the control group; venous blood of the three groups was collected in 5 mL after 8 h of fasting, and were tested respectively for serum uric acid, lipid indexes and inflammatory factors: IL-6, IL-2, IFN-γ, TNF-α, IL-4, IL-10. Results Glucose, triglycerides, total cholesterol, and LDL were significantly higher in the obese group versus the overweight group (P<0.001), while HDL was significantly lower than the control group (P<0.001), and these changes were more pronounced in the obese group (P<0.001).The Pearson correlation coefficient pointed out that the levels of serum uric acid in patients with hyperuricosuric acid were significantly associated with the pro-inflammatory factors IL- 6, IL-2, IFN-γ, and TNF-α were significantly positively correlated (P<0.001), whereas they were significantly negatively correlated with the anti-inflammatory factors IL-4, IL-10 (P<0.001). Conclusion High uric acid levels in overweight/obese patients can cause enhanced inflammatory responses and reduced expression levels of anti-inflammatory factors, and the interaction between uric acid and pro-inflammatory factors aggravates the condition of patients with hyperuricemia.

ObjectiveTo investigate the mechanism of ferroptosis mediated by long-chain acyl-CoA synthetase 4 （ACSL4） signalling pathway in rats with coronary heart disease with blood stasis syndrome and the intervention effect of Xuefu Zhuyutang. MethodsSPF male SD rats were randomly divided into normal group， sham-operation group， model group， trimetazidine group （5.4 mg·kg^-1）， low-， medium-， and high-dose group （3.51， 7.02，14.04 g·kg^-1） of Xuefu Zhuyutang. The coronary artery left anterior descending ligation method was used to prepare a model of coronary heart disease with blood stasis syndrome， and continuous treatment for 7 d was conducted， while the sham-operation group was only threaded and not ligated. The general macroscopic symptoms of the rats were observed， and indicators such as electrocardiogram， echocardiography， and blood rheology were detected. The pathological morphology of myocardial tissue was observed by hematoxylin-eosin （HE） staining， and the changes in mitochondria in myocardial tissue were observed by transmission electron microscopy. The level of iron deposition in myocardial tissue was observed by Prussian blue staining. The levels of 12-hydroxyeicosatetraenoic acid （12-HETE） and 15-HETE were detected in serum by enzyme-linked immunosorbent assay. A biochemical colourimetric assay was used to detect the levels of Fe²⁺， lipid peroxidation （LPO）， glutathione （GSH）， and T-GSH/glutathione disulfide （GSSG） in myocardial tissue. DCFH-DA fluorescence quantitative assay was employed to detect the levels of reactive oxygen species （ROS）. Western blot and Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） was adopted to detect the protein and mRNA expressions of glutathione peroxidase 4 （GPX4）， ferritin heavy chain 1 （FTH1）， ACSL4， and ly-sophosphatidylcholine acyltransferase3 （LPCAT3） in myocardial tissue. ResultsCompared with those in the normal group， the rats in the model group were poor in general macroscopic symptoms. The electrocardiogram showed widened QRS wave amplitude and increased voltage， bow-back elevation of the ST segments， elevated T waves， J-point elevation， and accelerated heart rate. Echocardiography showed a significant reduction in left ventricular ejection fraction （LVEF） and left ventricular fraction shortening （LVFS） （P<0.01）. Blood rheology showed that the viscosity of the whole blood （low， medium， and high rate of shear） was significantly increased （P<0.01）. HE staining showed an abnormal structure of myocardial tissue. There was a large area of myocardial necrosis and inflammatory cell infiltration and a large number of connective tissue between myocardial fibers. Transmission electron microscopy showed that the mitochondria were severely atrophy or swelling. The cristae were reduced or even broken， and the matrix was flocculent or even vacuolated. Prussian blue staining showed that there were a large number of iron-containing particles， and the iron deposition was obvious. The content of 12-HETE and 15-HETE in the serum was significantly increased （P<0.01）. The content of Fe²⁺， LPO， and ROS in myocardial tissue was significantly increased （P<0.01）. The content of GSH was significantly decreased （P<0.01）， and T-GSH/GSSG was decreased （P<0.01）. The protein and mRNA expressions of GPX4 and FTH1 in myocardial tissue were both significantly decreased （P<0.05， P<0.01）， while those of ACSL4 and LPCAT3 increased significantly （P<0.01）. Compared with the model group， the general macroscopic symptoms and electrocardiogram results of rats in low-， medium- and high-dose groups of Xuefu Zhuyutang were alleviated， and the differences in LVEF/LVFS ratios were all significantly increased （P<0.05， P<0.01）. The differences in whole-blood viscosity （low， medium， and high rate of shear） were all significantly decreased （P<0.01）. The results of HE staining and transmission electron microscopy showed that the morphology， structure， and mitochondria of cardiomyocytes were improved. The content of 12-HETE and 15-HETE in serum was reduced to different degrees in low-， medium-， and high-dose groups of Xuefu Zhuyutang （P<0.05， P<0.01）. The content of Fe²⁺， LPO， and ROS was significantly reduced in the medium- and high-dose groups of Xuefu Zhuyutang （P<0.05， P<0.01）， and the content of GSH and T-GSH/GSSG was significantly increased （P<0.05， P<0.01）. The protein and mRNA expressions of GPX4 and FTH1 were significantly increased to varying degrees in the medium- and high-dose groups of Xuefu Zhuyutang （P<0.05， P<0.01）， and ACSL4 and LPCAT3 were decreased to different degrees in the low-， medium-， and high-dose groups of Xuefu Zhuyutang （P<0.05， P<0.01）. ConclusionXuefu Zhuyutang can regulate iron metabolism and anti-lipid oxidation reaction to mediate ferroptosis through the ACSL4 signalling pathway， thus exerting a protective effect on rats with coronary heart disease with blood stasis syndrome.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo explore the clinical safety of Feilike Mixture （FLK） in the real world. MethodsThe safety of all children who received FLK from 29 institutions in 12 provinces between January 21，2021 and December 25，2021 was evaluated through prospective centralized surveillance and a nested case control study. ResultsA total of 3 035 juveniles were included. There were 29 research centers involved，which are distributed across 12 provinces，including one traditional Chinese medicine （TCM） hospital and 28 general hospitals. The average age among the juveniles was （4.77±3.56） years old，and the average weight was （21.81±12.97） kg. Among them，119 cases （3.92%） of juveniles had a history of allergies. Acute bronchitis was the main diagnosis for juveniles，with 1 656 cases （54.46%）. FLK was first used in 2 016 cases （66.43%），and 142 juvenile patients had special dosages，accounting for 4.68%. Among them，92 adverse drug reactions （ADRs） occurred，including 73 cases of gastrointestinal system disorders，10 cases of metabolic and nutritional disorders，eight cases of skin and subcutaneous tissue diseases，two cases of vascular and lymphatic disorders，and one case of systemic diseases and various reactions at the administration site. The manifestations of ADRs were mainly diarrhea，stool discoloration，and vomiting，and no serious ADRs occurred. The results of multi-factor analysis indicated that special dosages （the use of FLK）［odds ratio （OR） of 2.642， 95% confidence interval （CI） of 1.105-6.323］，combined administration： spleen aminopeptide （OR of 4.978， 95%CI of 1.200-20.655），and reason for combined administration： anti-infection （OR of 1.814， 95%CI of 1.071-3.075） were the risk factors for ADRs caused by FLK. Conclusion92 ADRs occurred among 3 035 juveniles using FLK. The incidence of ADRs caused by FLK was 3.03%，and the severity was mainly mild or moderate. Generally，the prognosis was favorable after symptomatic treatment such as drug withdrawal or dosage reduction，suggesting that FLK has good clinical safety.

Objective To investigate the screening results and factors affecting abnormal detection rates among high-risk groups of esophageal cancer and to explore effective intervention measures. Methods We investigated and collected the information on gender, education level, age, marital status, symptoms of reflux esophagitis (heartburn, acid reflux, belching, hiccup, foreign body sensation in the pharynx, and difficulty swallowing), consumption of pickled vegetables, salt use, and esophageal cancer incidence of villagers in a natural village in Wenfeng District, Anyang City, Henan Province. Changes in reflux esophagitis symptoms in the high-incidence area of esophageal cancer before and after 16 years were observed, and the relationship of such changes with esophageal cancer was analyzed. Results In 2008, 711 cases were epidemiologically investigated, including 213 cases with one of the symptoms of reflux esophagitis such as heartburn, acid reflux, belching, hiccups, foreign body sensation in the pharynx, and difficulty swallowing (sorted in accordance with the abovementioned symptoms; if there are multiple symptoms, then the former is taken); 55 cases with at least two related symptoms, among which the most symptom was heartburn in 108 cases (15.1%); followed by acid reflux, belching, etc. In 2024, the same group of people was investigated, and eight people were missing because of relocation. A total of 703 people were successfully investigated, of which 189 cases (26.8%) had one of the symptoms of reflux esophagitis, such as heartburn (sorted in accordance with relevant symptoms, if there are multiple symptoms, then the former will be selected); 167 cases (23.7%) had at least two related symptoms, among which the most symptom was heartburn in 139 cases (19.7%); followed by acid reflux. Over 16 years, among the 703 people investigated, 45 cases had esophageal cancer and they had one or more of the abovementioned symptoms. No significant differences in the reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.26); no significant differences in the composition of reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.299). Conclusion The detection rate of reflux esophagitis-related symptoms in the population in a high-risk area of esophageal cancer has not decreased in the past 16 years, and the high-risk factors still exist. Esophageal cancer is closely related to reflux esophagitis, and clinical practice can provide early diagnosis and treatment for high-risk population.