Objective:To evaluate the effect of polyetheretherketone (PEEK) periodontal splints and splints made from other materials under static loading on stress distributions in periodontal tissues, cement layer, and splints themselves.Methods:A finite element model based on cone-beam CT imaging data of a 25-year-old male patient (treated at the Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University in October 2021 for a cracked maxillary molar) with a healthy and intact mandibular dentition and periodontal health was constructed. The finite element model included anterior mandible dentition, mandibular bone model without bone resorption (WBR group), a periodontally compromised mandible model (control group), and three types of periodontal splints: a PEEK periodontal splint (0.7 mm thick, Young′s modulus: 4.1 MPa), a fiber-reinforced resin (FRC) splint (1.0 mm thick, Young′s modulus: 37.0 MPa), and a titanium splint (1.2 mm thick, Young′s modulus: 110.0 MPa). The bone resorption models fixed with different periodontal splints constituted the experimental groups (PEEK group, FRC group and titanium group). Loading of 100 N was applied on the midpoint of the incisal edge of tooth 41. The direction was set at 0°, which was parallel to the long axis of the tooth and downward. The buccal to lingual and downward angles were 30°and 60°, respectively, perpendicular to the long axis of the tooth and 90° to the lingual side. The finite element analysis software was utilized to analyze the stress distribution characteristics of the periodontal tissues, adhesive layer, and the splint itself in the anterior mandibular teeth among the different group.Results:Under the different loading simulation, in the control group, the maximal von Mises stresses of periodontal ligament and bone were 15.7-50.2 MPa and 38.8-130.3 MPa, respectively, and in the WBR group, the maximal von Mises stresses of periodontal ligament and bone were 3.6-6.4 MPa and 16.5-42.7 MPa, respectively. Under the same loading conditions, the magnitude of maximal von Mises stresses in periodontal tissues in the PEEK group was 4.6-6.2 MPa, and the magnitude of stresses in the periodontal ligament of 41 teeth in the WBR group was similar to that in the PEEK group, but higher than that in the FRC and titanium groups. The maximal von Mises stresses of each group is primarily distributed in the periodontal ligament and alveolar bone at the cervical area of the tooth. The higher the elastic modulus of the splint, the higher its own maximal von Mises stresses, and the smaller the maximal principal stresses transmitted to the adhesive layer. In the PEEK group and titanium group, the stress distribution area in the adhesive layer and the splint was near the splint connection adjacent to tooth 41.Conclusions:Periodontal splints fabricated from three types of materials, are effective in distributing stress within the periodontal tissues of the abutment teeth. Compared to FRC and titanium group, the higher PEEK splint stress value was obtained, and the smaller the stress value was transmitted to its adhesive layer.

The synergistic antibacterial strategy of peroxidase mediated chemodynamic therapy(CDT)and photothermal therapy(PTT)has been proven to effectively resist bacteria.However,the antibacterial effect against Pseudomonas aeruginosa is severely limited due to the factors such as short lifespan of reactive oxygen species(ROS)(<200 ns)and limited diffusion distance(about 20?200 nm).In this study,glucopyranose functionalized MoO3-x(P-MoO3-x)nanoenzyme was successfully synthesized using a one-pot hydrothermal method.This nanoenzyme exhibited both peroxidase-like activity and a photothermal effect.The combined antibacterial performance and biological safety of P-MoO3-x was analyzed and verified.By utilizing specific interactions with glucopyranose and lectin,P-MoO3-x nanoenzyme could target the surface of Pseudomonas aeruginosa.This targeted approach effectively shortened the range of hydroxyl radicals,significantly enhancing the antibacterial effect against Pseudomonas aeruginosa.Under photothermal action,P-MoO3-x could reach the optimal reaction effect at 70℃.Even at low concentrations of hydrogen peroxide(50 μmol/L),it released more hydroxyl radicals.In vitro antibacterial analysis experiments demonstrated that the inactivation efficiency of the P-MoO3-x antibacterial system against Pseudomonas aeruginosa(106 CFU/mL)exceeded 99%.Furthermore,in vivo experiments confirmed the significant therapeutic effects of P-MoO3-x in treating methicillin-resistant Staphylococcus aureus(MRSA)infected wounds and promoting wound healing,without producing toxicity to cells.In conclusion,P-MoO3-x exhibited excellent antibacterial ability and good biocompatibility,making it a promising anti-infective nanoenzyme with broad application prospects.

To explore the digital manufacturing process of distal extension removable partial denture. From November 2021 to December 2022, 12 patients (7 males and 5 females) with free-ending situation were selected from the Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University. Three-dimensional model of the relationship between alveolar ridge and jaw position was obtained by intraoral scanning technique. After routine design, manufacturing and try-in of metal framework for removable partial denture, the metal framework was located in the mouth and scanned again to obtain the composite model of dentition, alveolar ridge and metal framework. The free-end modified model is obtained by merging the digital model of free-end alveolar ridge with the virtual model with the metal framework. The three-dimensional model of artificial dentition, and base plate was designed on the free-end modified model, and the resin model were made by digital milling technology. The removable partial denture was made by accurately positioning the artificial dentition and base plate, bonding metal framework with injection resin, grinding and polishing the artificial dentition and resin base. Compared with the design data after clinical trial, the results showed that there was an error of 0.4-1.0 mm and an error of 0.03-0.10 mm in the connection between the resin base of artificial dentition and the connecting rod of the in-place bolt and the connection between artificial dentition and resin base. After denturen delivery, only 2 patients needed grinding adjustment in follow-up visit due to tenderness, and the rest patients did not find any discomfort. The digital fabrication process of removable partial denture used in this study can basically solve the problems of digital fabrication of free-end modified model and assembly of artificial dentition with resin base and metal framework.

Objective To investigate the predictive value of quantitative flow ratio(QFR)on the occurrence of major adverse cardiovascular events(MACE)3 years after percutaneous coronary intervention(PCI)in patients with non-acute myocardial infarction.Methods This study included 139 patients with non-acute myocardial infarction who underwent PCI from January 2020 to June 2020 in the cardiac catheterization room of our hospital,all of them underwent post-PCI target vessel QFR measurements,and the incidence of MACE was followed up 3 years after PCI.The cut-off value of QFR was calculated by receiver operating characteristic(ROC)curve,according to which patients were divided into QFR＞0.95 group and QFR≤0.95 group,and patients were divided into MACE group and non-MACE group depending on whether MACE occurs.The independent influencing factors of post-PCI QFR in patients with non-acute myocardial infarction were investigated by univariate and multifactorial linear regression analysis.Univariate and multivariate Cox regression analysis was used to investigate the predictive value of post-PCI QFR in the occurrence of MACE 3 years after PCI in patients with non-acute myocardial infarction.The long-term prognosis of patients with QFR＞0.95 and those with QFR≤0.95 was compared by drawing the survival curve of no-MACE event.Results ROC curve analysis showed that post-PCI QFR predicted the occurrence of MACE 3 years after surgery in non-acute myocardial infarction patients with statistical significance(AUC 0.666,95％CI 0.556-0.777,P=0.003),and the cut-off value of MACE was 0.95.The sensitivity and specificity were 75.00％and 51.30％for the diagnosis of MACE with QFR≤0.95.Patients were divided into QFR≤0.95 group(n=74)and QFR＞0.95 group(n=65)according to the cut-off value.Multivariate linear regression analysis showed that the maximum area stenosis rate after PCI was an independent factor for post-PCI QFR(P＜0.001).Multivariate Cox regression analysis showed that body mass index(BMI),post-PCI QFR,three-vessel lesions and post-PCI QFR groups were independent influencing factors of no-MACE lifetime.The no-MACE survival curve showed that the long-term prognosis of patients in the QFR＞0.95 group was significantly better than that in the QFR≤0.95 group(x2=5.272,P=0.022).Conclusions The optimal cut-off value of post-PCI QFR for predicting the occurrence of MACE 3 years after PCI in non-acute myocardial infarction patients was 0.95,and patients with QFR≤0.95 had worse long-term prognosis,and BMI,three-vessel lesions,and post-PCI QFR≤0.95 were independent risk factors for the occurrence of MACE 3 years in non-acute myocardial infarction patients after PCI.

Blast injury of the chest injury is the most common wound in modern war trauma and terrorist attacks, and is also the most fatal type of whole body explosion injury. Most patients with severe blast injury of the chest die in the early stage before hospitalization or during transportation, so first aid is critically important. At present, there exist widespread problems such as non-standard treatment and large difference in curative effect, while there lacks clinical treatment standards for blast injury of the chest. According to the principles of scientificity, practicality and advancement, the Trauma Society of Chinese Medical Association has formulated the guidance of classification, pre-hospital first aid, in-hospital treatment and major injury management strategies for blast injury of the chest, aiming to provide reference for clinical diagnosis and treatment.

OBJECTIVES: To investigate the clinical treatment outcomes and the changes of the outcomes over time in extremely preterm twins in Guangdong Province, China. METHODS: A retrospective analysis was performed for 269 pairs of extremely preterm twins with a gestational age of <28 weeks who were admitted to the department of neonatology in 26 grade A tertiary hospitals in Guangdong Province from January 2008 to December 2017. According to the admission time, they were divided into two groups: 2008-2012 and 2013-2017. Besides, each pair of twins was divided into the heavier infant and the lighter infant subgroups according to birth weight. The perinatal data of mothers and hospitalization data of neonates were collected. The survival rate of twins and the incidence rate of complications were compared between the 2008-2012 and 2013-2017 groups. RESULTS: Compared with the 2008-2012 group, the 2013-2017 group (both the heavier infant and lighter infant subgroups) had lower incidence rates of severe asphyxia and smaller head circumference at birth (P<0.05). The mortality rates of both of the twins, the heavier infant of the twins, and the lighter infant of the twins were lower in the 2013-2017 group compared with the 2008-2012 group (P<0.05). Compared with the 2008-2012 group, the 2013-2017 group (both the heavier infant and lighter infant subgroups) had lower incidence rates of pulmonary hemorrhage, patent ductus arteriosus (PDA), periventricular-intraventricular hemorrhage (P-IVH), and neonatal respiratory distress syndrome (NRDS) and a higher incidence rate of bronchopulmonary dysplasia (P<0.05). CONCLUSIONS There is a significant increase in the survival rate over time in extremely preterm twins with a gestational age of <28 weeks in the 26 grade A tertiary hospitals in Guangdong Province. The incidences of severe asphyxia, pulmonary hemorrhage, PDA, P-IVH, and NRDS decrease in both the heavier and lighter infants of the twins, but the incidence of bronchopulmonary dysplasia increases. With the improvement of diagnosis and treatment, the multidisciplinary collaboration between different fields of fetal medicine including prenatal diagnosis, obstetrics, and neonatology is needed in the future to jointly develop management strategies for twin pregnancy.
Bronchopulmonary Dysplasia/epidemiology* ; Female ; Gestational Age ; Humans ; Infant ; Infant, Extremely Premature ; Infant, Newborn ; Pregnancy ; Respiratory Distress Syndrome, Newborn/epidemiology* ; Retrospective Studies ; Treatment Outcome

OBJECTIVE: To compare the clinical efficacy of cupping treatment combined with antibiotics and antibiotics alone for bacterial pneumonia in children. METHODS: A total of 72 children with bacterial pneumonia were randomly divided into an observation group (36 cases, 1 case dropped off) and a control group (36 cases). The children in the control group were treated with intravenous drip of cefodizine sodium [80 mg/(kg•d)] for 7 days. Based on the treatment of the control group, the children in the observation group were treated with cupping treatment on the bladder meridian of the back on the first day and the fourth day of antibiotic treatment; each cupping treatment was given for 5-10 min; the treatment of observation group was given for 7 days. The days for complete fever reduction, TCM syndrome scores and Canadian acute respiratory illness flu scale (CARIFS) scores before and after treatment were observed, and the clinical efficacy was evaluated. RESULTS: The days for complete fever reduction in the observation group were shorter than that in the control group ( CONCLUSION Cupping treatment combined with antibiotics has similar efficacy with antibiotics alone for bacterial pneumonia in children, but shows better effect in shortening the duration of fever and improving pulmonary symptoms.
Anti-Bacterial Agents ; Canada ; Child ; Cough ; Cupping Therapy ; Humans ; Pneumonia, Bacterial ; Treatment Outcome

In this paper, the correlation between the chemical constituents of Chinese herbal medicines Daphnes Cortex and the ecological factors and soil factors was studied, which provided a reference for the selection of suitable areas for artificial cultivation of Daphne giraldii and wild tending. The geographic information system(GIS) was applied to obtain the ecological factor information of 23 collection sites of Daphnes Cortex, and the soil factor information was determined by the standard procedure in the soil test standard manual. Combining the information of 93 chemical constituents of Daphnes Cortex in 23 collection sites the correlation between components and ecological factors and soil factors was analyzed by statistical methods. The correlation analysis showed that the longitude, annual average rainfall, annual sunshine intensity, annual average temperature in the ecological factors, soil type, effective copper and pH value were the dominant factors affecting the chemical composition of Daphnes Cortex.
China ; Copper ; Daphne/chemistry* ; Drugs, Chinese Herbal ; Geographic Information Systems ; Hydrogen-Ion Concentration ; Plants, Medicinal/chemistry* ; Rain ; Soil/chemistry* ; Sunlight ; Temperature

OBJECTIVE: To investigate the clinical features, accompanying gene mutation characteristics and prognostic factors of adult patients with acute myeloid leukemia with mutated NPM1 (NPM1AML). METHODS: Seventy-three patients with newly diagnosed adult NPM1AML were selected. The mutations of 22 genes were detected by second generation sequencing and 43 fusion genes of AML were detected by real-time fluorescent quantitative PCR. The Kaplan-Meier survival curve and Cox multivariate regression analysis were used to study the prognostic factors. RESULTS: A total of 74 NPM1 site mutations were detected in 73 patients with NPM1AML. The incidence rates were 92.0% L287fs, 2.7% Q289fs and W288fs, 1.4% L258fs and Q289H, among which 1 patient had 2 NPM1 mutations; the different mutation sites had no effect on the prognosis of NPM1AML. The median value of NPM1 variant allele frequency (VAF) was 35.4% (1.8%-56.6%). Based on the uppermost quartile of 38.4%, the patients were classified as NPM1 VAF>38.4% (NPM1AML) and NPM1 VAF≤38.4% (NPM1AML). Compared with NPM1AML, the early mortality rate was statistically significantly higher (33.3% vs 7.3%, P<0.05), and median EFS (148 d，95%CI 58-238 d vs 372 d，95%CI 264-480 d) (P<0.01) and median OS (179 d 95%CI 6-352 d vs 444 d) (P<0.01) were significantly shorter in NPM1 AML. A total of 126 accompanying gene mutation sites were detected in 87.7% of patients with NPM1AML. The patients with NRAS gene mutation displayed a higher rate of complete remission (100% vs 58%) (P<0.05) and longer median OS (not reached to 320 d, 95%CI 150-490 d) (P<0.05). The 43 fusion genes were examined in 65 out of 73 cases of NPM1AML, and in all the patients the fusion gene test was negative. Multivariate analysis showed that NPM1 VAF>38.4% was an independent prognostic factor for EFS (HR=3.1, 95% CI 1.6-6.4, P<0.01) and OS (HR=3.0, 95% CI 1.4-6.2, P<0.01). CONCLUSION The NPM1 gene mutation in AML patients often is accompanied by other gene mutations, while the coexistence of fusion genes is rare; high NPM1 mutant allele burden is an independent prognostic factor for adult AML patients with mutated NPM1.
Alleles ; Humans ; Leukemia, Myeloid, Acute ; genetics ; Mutation ; Nuclear Proteins ; genetics ; Prognosis ; fms-Like Tyrosine Kinase 3

OBJECTIVETo examine the association between habitual sleep duration and obesity among Chinese adults.

METHODSThe association of sleep duration and obesity was investigated among 7,094 community-dwelling Chinese adults. Sleep duration was self-reported. In this study, obesity was defined as follows: body mass index (BMI) ⋝ 28 kg/m2, waist circumference (WC) ⋝ 85 cm in men and ⋝ 80 cm in women, and percent body fat (%BF) ⋝ 25 in men and ⋝ 35 in women. Logistic and quantile regressions were employed to examine relationships of interest.

RESULTSOverall, 6.42% of the participants reported short sleep durations (< 6 h/d) while 14.71% reported long (⋝ 9 h/d) sleep durations. Long sleepers (⋝ 9 h/d) represented a greater frequency of women with obesity [odds ratio (OR): 1.30; 95% confidence interval (CI), 1.02-1.67] and high body fat (1.43, 1.04-1.96) than those who slept 7-8 h/d. An association between long sleep times and higher BMI estimations was found across the 10th-75th percentile of the BMI distribution. Among men, long sleepers (⋝ 9 h/d) presented lower risks of developing abdominal obesity compared with individuals who slept 7-8 h/d (OR = 0.79, 95% CI: 0.44-0.99).

CONCLUSIONOur study suggests that long sleep durations are associated with general obesity in Chinese women but reduced waist circumferences in men. Confirmatory studies are needed to determine the heterogeneous association of sleep time and obesity by gender.

Adipose Tissue ; physiology ; Adult ; Asian Continental Ancestry Group ; Body Mass Index ; China ; Female ; Humans ; Male ; Middle Aged ; Rural Population ; Sleep ; physiology ; Surveys and Questionnaires ; Urban Population ; Waist Circumference