Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective To explore the coupling mechanism between medical surge response resources and the spread of secondary risks during public health emergencies,as well as the effectiveness of relevant interventions.Methods Based on complex network theory,a dual-layer network model of medical resources and secondary events was constructed.The interactive feedback between medical resource status and secondary event risk,as well as the effects of network structure,were analyzed through MATLAB simulations,REPAST agent-based modeling,and mean-field analysis.Results Simulation and prediction results show that an increase in first-layer resource-deficient nodes significantly raises the activation rate and transmission speed of secondary events,while the clustering and spread of secondary events in the second layer,in turn,intensify resource depletion,creating a negative feedback loop.Mean-field analysis indicates a nonlinear positive correlation between the adequacy of medical resources and the likelihood of secondary events.Network structure analysis reveals that when the average node degree exceeds 8,resource allocation efficiency improves markedly.Conclusion There exists a dynamic coupling and bidirectional feedback relationship between medical resource status and secondary event risks.Enhancing the flexible allocation and responsiveness of medical resources,improving multi-sectoral collaborative monitoring and coordinated regulation,optimizing network connectivity and coordination mechanisms for resource distribution,and establishing dynamic monitoring and tiered early warning systems are key strategies for strengthening the resilience of healthcare systems and effectively containing the spread of secondary events.

Objective To empirically analyze multiple pathways for enhancing medical surge response capacity and provide useful references for improving the resilience of health systems.Methods A comprehensive theoretical analysis framework for improving medical surge response capacity was constructed based on the 4S theory and collaborative governance theory.68 interview texts on medical surge response capacity conducted in July 2024 were selected as analysis samples.Using fuzzy-set Qualitative Comparative Analysis(fsQCA),7 conditional variables were selected from four dimensions:management system,information system,materials,and personnel to analyze their impact on medical surge response capacity.Results(1)A single conditional variable does not constitute a necessary condition for improving medical surge response capacity;(2)After the combination of conditions,8 specific configuration paths for capacity improvement were identified.Through systematic and comprehensive refinement,they were summarized into three modes of comprehensive configuration capacity improvement paths,namely:rapid response and collaborative operation mode,information empowerment and precise response mode,and resource conditions and resilience construction mode.Conclusion It is necessary to explore and construct systematic,combined,modularized and path-oriented capacity building strategies,refine the operational implementation paths for improving China's medical surge response capacity,target the linkage and configuration modes of different conditional variables,promote the formulation and implementation of modular construction schemes oriented by key capacity,and make efforts from multiple aspects to enhance the resilience of the health system.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective To explore the coupling mechanism between medical surge response resources and the spread of secondary risks during public health emergencies,as well as the effectiveness of relevant interventions.Methods Based on complex network theory,a dual-layer network model of medical resources and secondary events was constructed.The interactive feedback between medical resource status and secondary event risk,as well as the effects of network structure,were analyzed through MATLAB simulations,REPAST agent-based modeling,and mean-field analysis.Results Simulation and prediction results show that an increase in first-layer resource-deficient nodes significantly raises the activation rate and transmission speed of secondary events,while the clustering and spread of secondary events in the second layer,in turn,intensify resource depletion,creating a negative feedback loop.Mean-field analysis indicates a nonlinear positive correlation between the adequacy of medical resources and the likelihood of secondary events.Network structure analysis reveals that when the average node degree exceeds 8,resource allocation efficiency improves markedly.Conclusion There exists a dynamic coupling and bidirectional feedback relationship between medical resource status and secondary event risks.Enhancing the flexible allocation and responsiveness of medical resources,improving multi-sectoral collaborative monitoring and coordinated regulation,optimizing network connectivity and coordination mechanisms for resource distribution,and establishing dynamic monitoring and tiered early warning systems are key strategies for strengthening the resilience of healthcare systems and effectively containing the spread of secondary events.

Objective To empirically analyze multiple pathways for enhancing medical surge response capacity and provide useful references for improving the resilience of health systems.Methods A comprehensive theoretical analysis framework for improving medical surge response capacity was constructed based on the 4S theory and collaborative governance theory.68 interview texts on medical surge response capacity conducted in July 2024 were selected as analysis samples.Using fuzzy-set Qualitative Comparative Analysis(fsQCA),7 conditional variables were selected from four dimensions:management system,information system,materials,and personnel to analyze their impact on medical surge response capacity.Results(1)A single conditional variable does not constitute a necessary condition for improving medical surge response capacity;(2)After the combination of conditions,8 specific configuration paths for capacity improvement were identified.Through systematic and comprehensive refinement,they were summarized into three modes of comprehensive configuration capacity improvement paths,namely:rapid response and collaborative operation mode,information empowerment and precise response mode,and resource conditions and resilience construction mode.Conclusion It is necessary to explore and construct systematic,combined,modularized and path-oriented capacity building strategies,refine the operational implementation paths for improving China's medical surge response capacity,target the linkage and configuration modes of different conditional variables,promote the formulation and implementation of modular construction schemes oriented by key capacity,and make efforts from multiple aspects to enhance the resilience of the health system.