ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

Objective: To investigate the prevalence levels and trends of overweight and obesity among adult residents in Zhejiang Province from 2015 to 2023, so as to provide a basis for developing regional weight management strategies. Methods: Permanent residents aged ≥18 years from Zhejiang Province who participated in the China Chronic Disease and Risk Factor Surveillance Project in 2015, 2018, and 2023 were selected as survey subjects. Data on sociodemographic information, height, weight and waist circumference were collected through questionnaire surveys and physical examinations. The prevalence of overweight, obesity, and central obesity were calculated and standardized using data from the Seventh National Population Census of Zhejiang Province in 2020. The Cochran-Armitage trend test was employed to analyze the trends in prevalence of overweight, obesity, and central obesity across different genders, ages and regions. Results: A total of 23 902 individuals were surveyed, comprising 10 985 males (45.96%) and 12 917 females (54.04%). Participants were aged ≥60 years, with 13 088 individuals accounting for 54.76%. There were 9 388 urban residents (39.28%) and 14 514 rural residents (60.72%). The standardized prevalence of overweight among residents increased from 30.05% in 2015 to 33.98% in 2023, the standardized prevalence of obesity increased from 7.67% to 15.22%, and the standardized prevalence of central obesity increased from 22.81% to 33.82%, all showed upward trends (all P<0.05). In 2015, 2018, and 2023, the standardized prevalence of overweight was higher in males than in females. In 2018 and 2023, the standardized prevalence of obesity and central obesity were higher in males than in females (all P<0.05). From 2015 to 2023, the standardized prevalence of overweight, obesity, and central obesity among both males and females showed upward trends (all P<0.05). In 2015, 2018 and 2023, the prevalence of central obesity showed an increasing trend with age (all P<0.05). From 2015 to 2023, upward trends were observed in the prevalence of overweight, obesity, and central obesity among residents aged 18-<45 years and aged ≥60 years, as well as in the prevalence of obesity and central obesity among residents aged 45-<60 years (all P<0.05). In 2015, 2018 and 2023, the standardized prevalence of overweight obesity were higher in urban areas than in rural areas, while the standardized prevalence of central obesity was lower in urban areas (all P<0.05). From 2015 to 2023, the standardized prevalence of overweight, obesity, and central obesity among both urban and rural areas showed upward trends (all P<0.05). Conclusion From 2015 to 2023, the prevalence of overweight, obesity, and central obesity among adult residents in Zhejiang Province showed increasing trends, with variations in prevalence levels and trends observed across genders, ages, and urban / rural areas.

OBJECTIVE: By analyzing the hormone secretion of the adenohypophysis, thyroid glands, gonads, and adrenal cortex in patients with hematological diseases before and after hematopoietic stem cell transplantation (HSCT), this study aims to preliminarily explore the effect of HSCT on patients' hormone secretion and glandular damage. METHODS: The baseline data of 209 hematological disease patients who underwent HSCT in our hospital from January 2019 to December 2023, as well as the data on the levels of hormones secreted by the adenohypophysis, thyroid glands, gonads and adrenal cortex before and after HSCT were collected, and the changes in hormone levels before and after transplantation were analyzed. RESULTS: After allogeneic HSCT, the levels of thyroid-stimulating hormone (TSH), triiodothyronine (T3), free triiodothyronine (FT3) and estradiol (E2) decreased, while the levels of luteinizing hormone (LH) and follicle- stimulating hormone (FSH) increased. The T3 level of patients with decreased TSH after transplantation was lower than that of those with increased TSH after transplantation. In female patients, the levels of prolactin (PRL), progesterone (Prog), and testosterone (Testo) decreased after HSCT. Testo and PRL decreased when there was a donor-recipient sex mismatch, and the levels of adrenocorticotropic hormone (ACTH) and cortisol (COR) decreased when the HLA matching was haploidentical. The levels of T3, FT3, and PRL decreased after autologous HSCT. In allogeneic HSCT patients, the levels of TSH, T4, T3, FT3, and ACTH in the group with graft-versus-host disease (GVHD) were significantly lower than those in the group without GVHD. Logistic regression analysis showed the changes in hormone levels after transplantation were not correlated with factors such as the patient's sex, age, or whether the blood types of the donor and the recipient are the same. CONCLUSION HSCT can affect the endocrine function of patients with hematological diseases, mainly affecting target glandular organs such as the thyroid, gonads, and adrenal glands, while the secretory function of the adenohypophysis is less affected.
Humans ; Hematopoietic Stem Cell Transplantation ; Female ; Male ; Hematologic Diseases/blood* ; Follicle Stimulating Hormone/blood* ; Triiodothyronine/blood* ; Luteinizing Hormone/blood* ; Thyroid Gland/metabolism* ; Estradiol/blood* ; Thyrotropin/blood* ; Gonads/metabolism* ; Adult ; Middle Aged ; Adrenocorticotropic Hormone/blood* ; Hormones/metabolism* ; Adrenal Cortex/metabolism* ; Prolactin

Objective To summarize the clinical efficacy of robotic-assisted left thoracic small-incision minimally invasive direct coronary artery bypass grafting(MIDCAB).Methods A retrospective analysis was conducted on the procedures and treatment outcomes of robotic-assisted MIDCAB in the Army Medical Center of PLA from October 2016 to June 2023.Baseline clinical information,MIDCAB-related data,perioperative conditions and data during follow-up were collected and analyzed.Results There were 23 patients subjected,including 21 males and 2 females,with a mean age of 58.17±7.49 years,and a body mass index(BMI)of 23.99±3.25 kg/m2.All of them experienced angina pectoris,and 1 had a history of myocardial infarction,1 had dilated cardiomyopathy,2 patients had chronic obstructive pulmonary disease(COPD),and 10 had a history of percutaneous coronary intervention(PCI).Robotic-assisted MIDCAB procedure was successfully completed.No internal mammary artery injury or transformation of the procedure occurred in these cases,and excellent bridging vessel flow was achieved after anastomosis of the internal mammary artery to left anterior descending branch.The incision length in the left chest was 8(8,8)cm,the operation time was 380(300,465)min,the intraoperative bleeding volume was 300(100,400)mL,the length of ICU stay was 3(2,3)d,the amount of thoracic drainage was 780(525,1 040)mL,and the postoperative length from surgery to discharge was 11.17±2.38 d.No mortality was observed during or within 30 d of hospitalization,and 1 patient was readmitted due to pericardial effusion within 30 d,and was discharged after symptomatic treatment including pericardiocentesis and drainage.No deaths,major adverse cardiovascular and cerebrovascular events(MACCE),or re-revascularization occurred in all patients during outpatient and telephone follow-up.Conclusion Robotic-assisted internal mammary artery dissection is a delicate and safe technique,and coronary artery bypass grafting in minimally invasive small-incision off-pump is effective,safe and feasible,with satisfactory short-and mid-term outcomes.The technique is suitable for minimally invasive coronary artery disease surgery and is worthy of popularization and application.

Objective To observe the difference of bone micro-structure in different regions of proximal femur,micro-CT scanning was performed on 30 proximal femur specimens to explain the mechanism of proximal femur fracture and to provide anatomical basis for prosthesis design.Methods Totally 30 intact proximal femur specimens were obtained from 60-80 year-old cadavers.Micro-CT scanning was used to measure the trabecular thickness(Tb.Th),trabecular number(Tb.N),trabecular space(Tb.Sp),connectivity(Conn)and bone mineral density(BMD)and other parameters in 7 regions of proximal femur,including proximal pressure trabecular(PPT),distal pressure trabecular(DPT),femoral head-neck junction(FHNJ),head and neck of femoral neck(HNFN),the base of femoral neck(BPFN),intertrochanteric line(IL)and greater trochanter(GT).Results The bone mineral density of IL and GT were higher than those of BPFN,FHNJ,DPT and PPT.The trabecular thickness of GT was the largest,followed by IL,BPFN and HNFN,and the smallest was FHNJ,DPT and PPT.The trabecular space of IL was larger than that of GT,and the data of both were larger than those of other parts,among which DPT and PPT were the smallest.The trabecular number of IL and GT were the smallest,BPFN,HNFN and FHNJ were larger,and DPT was the largest.The volume fraction of IL was the smallest,BPFN and HNFN were larger,DPT and PPT were the largest.Conclusion The bone density,trabecular thickness,bone volume,and total volume of GT and IL in the proximal femur of elderly patients are all relatively large,so the reason for the high incidence of fractures is not due to weak internal bone microstructure;The bone density,trabecular thickness,and trabecular gap at the proximal and distal ends of the vertical trabecular bone are relatively small.If it is necessary to perform core decompression for prosthesis filling at this location,the design should be conducive to the mechanical conduction of the prosthesis and the regeneration of surrounding bone tissue.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

Objective To evaluate the effects of ketamine combined with sufentanil on postoperative analgesia and depression in patients undergoing hip arthroplasty.Methods A total of 60 patients who underwent elective hip arthroplasty were selected and divided into the S group,the SK1 group and the SK2 group according to the patient-controlled intravenous analgesia regimen,with 20 cases in each group.Patients in the S group were received 2 μg/kg of sufentanil for postoperative analgesia,patients in the SK1 group were received 1 mg/kg of esketamine and 2 μg/kg of sufentanil for postoperative analgesia,and patients in the SK2 group were received 2 mg/kg of esketamine and 2 μg/kg of sufentanil for postoperative analgesia.At 1,4,24,and 48 hours after surgery,the analgesic effect of patients was evaluated using the numeric rating scale(NRS),and the sedation effect of patients was evaluated using the Ramsay sedation score.Depression of patients before and 48 hours after surgery was assessed by self-rating depression scale(SDS).The adverse reactions such as nausea and vomiting,dizziness and headache,respiratory depression,and mental symptoms within 48 hours after surgery of patients were recorded.Results The NRS scores 1,4,and 24 hours after surgery of patients in the SK1 group and the SK2 group were lower than those in the S group(P<0.05);there was no statistically significant difference in the NRS scores 48 hours after surgery of patients among the three groups(P>0.05);there was no statistically significant difference in the NRS scores at different postoperative points of patients between the SK1 and SK2 groups(P>0.05).The SDS scores 48 hours after surgery of patients in each group were lower than those before surgery(P<0.05).There was no statistically significant difference in the Ramsay scores at different postoperative points of patients among the three groups(P>0.05).The incidence of adverse reactions 48 hours after surgery in the SK2 group was higher than those in the S group and the SK1 group(P<0.05).Conclusion Using 1 mg/kg of esketamine combined with 2 μg/kg of sufentanil after hip arthroplasty has a good analgesic effect without obvious increase of adverse reactions or significant effect on improving depression of patients.