Objective The aim of this study was to investigate the correlation between the interaction of uric acid and inflammatory factors and hyperuricemia in overweight/obese patients. Methods The personnel with hyperuricemia who underwent physical examination in our hospital from September 2021 to September 2022 were selected as the study subjects, and they were divided into 100 cases of overweight group and 90 cases of obese group according to the BMI index; 120 cases of healthy and non-hyperuricemic personnel were randomly selected as the control group; venous blood of the three groups was collected in 5 mL after 8 h of fasting, and were tested respectively for serum uric acid, lipid indexes and inflammatory factors: IL-6, IL-2, IFN-γ, TNF-α, IL-4, IL-10. Results Glucose, triglycerides, total cholesterol, and LDL were significantly higher in the obese group versus the overweight group (P<0.001), while HDL was significantly lower than the control group (P<0.001), and these changes were more pronounced in the obese group (P<0.001).The Pearson correlation coefficient pointed out that the levels of serum uric acid in patients with hyperuricosuric acid were significantly associated with the pro-inflammatory factors IL- 6, IL-2, IFN-γ, and TNF-α were significantly positively correlated (P<0.001), whereas they were significantly negatively correlated with the anti-inflammatory factors IL-4, IL-10 (P<0.001). Conclusion High uric acid levels in overweight/obese patients can cause enhanced inflammatory responses and reduced expression levels of anti-inflammatory factors, and the interaction between uric acid and pro-inflammatory factors aggravates the condition of patients with hyperuricemia.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

The chemical constituents of sesquiterpenes from 95% ethanol extract of Aquilariae Lignum Resinatum were isolated and purified by various column chromatography techniques, including silica gel, Sephadex LH-20, octadecylsilyl(ODS), and semi-preparative high performance liquid chromatography(HPLC). Their planar structures and absolute configurations were elucidated by ultraviolet(UV) spectrometry, infrared(IR) spectroscopy, mass spectrometry(MS), nuclear magnetic resonance(NMR), electronic circular dichroism(ECD), and other techniques. Eight sesquiterpenoids were isolated and identified as(+)-(7R,10R)-selina-4,11-dien-12-dimethoxy-15-al(1),(+)-(7R,10R)-selina-4,11-diene-12,15-dial(2), agalleudesmanol B(3), aquisinenoid C(4), 12,15-dioxo-α-selinen(5), agarospiranic aldehyde B(6), neopetasane(7), and eremophila-7(11),9-dien-8-one(8). Compound 1 was a new compound, and it was the first time to find a dimethoxy substitution on the side chain of eudesmane-type sesquiterpene skeleton.
Sesquiterpenes/isolation & purification* ; Thymelaeaceae/chemistry* ; Molecular Structure ; Drugs, Chinese Herbal/isolation & purification* ; Magnetic Resonance Spectroscopy

The quality of traditional Chinese medicine(TCM) is a critical foundation for ensuring the stability of its efficacy, as well as the safety and effectiveness of its clinical use. The identification of critical quality attributes(CQAs) is one of the core components of TCM preparation quality control. This study focuses on Jianwei Xiaoshi Tablets and explores their CQAs related to property and flavor from the perspective of taste receptor proteins. Three taste receptor proteins, T1R2, T1R3, and TRPV1, were selected, and a biosensor based on high-electron-mobility transistor(HEMT) was constructed to detect the interactions between Jianwei Xiaoshi Tablets and taste receptor proteins. Simultaneously, liquid chromatography-mass spectrometry(LC-MS) technology was used to analyze the chemical composition of Jianwei Xiaoshi Tablets. In examining the interaction strength, the results indicated that the interaction between Jianwei Xiaoshi Tablets and TRPV1 protein was the strongest, followed by T1R3, with the interaction with T1R2 being relatively weaker. By combining biosensing technology with LC-MS, 16 chemical components were identified from Jianwei Xiaoshi Tablets, among which six were selected as CQAs for sweetness and seven for pungency. Further validation experiments demonstrated that CQAs such as hesperidin and hesperetin had strong interactions with their corresponding taste receptor proteins. Through the combined use of multiple technological approaches, this study successfully determined the property and flavor-related CQAs of Jianwei Xiaoshi Tablets. It provides novel ideas and approach for the identification of CQAs in TCM preparations and offers comprehensive theoretical support for TCM quality control, contributing to the improvement and development of TCM preparation quality control systems.
Drugs, Chinese Herbal/chemistry* ; Biosensing Techniques/methods* ; TRPV Cation Channels/chemistry* ; Tablets/chemistry* ; Receptors, G-Protein-Coupled/genetics* ; Quality Control ; Taste ; Humans ; Mass Spectrometry

OBJECTIVES: To report the development, validation, and findings of the Multi-dimensional Attention Rating Scale (MARS), a self-report tool crafted to evaluate six-dimension attention levels. METHODS: The MARS was developed based on Classical Test Theory (CTT). Totally 202 highly educated healthy adult participants were recruited for reliability and validity tests. Reliability was measured using Cronbach's alpha and test-retest reliability. Structural validity was explored using principal component analysis. Criterion validity was analyzed by correlating MARS scores with the Toronto Hospital Alertness Test (THAT), the Attentional Control Scale (ACS), and the Attention Network Test (ANT). RESULTS: The MARS comprises 12 items spanning six distinct dimensions of attention: focused attention, sustained attention, shifting attention, selective attention, divided attention, and response inhibition.As assessed by six experts, the content validation index (CVI) was 0.95, the Cronbach's alpha for the MARS was 0.78, and the test-retest reliability was 0.81. Four factors were identified (cumulative variance contribution rate 68.79%). The total score of MARS was correlated positively with THAT (r = 0.60, P < 0.01) and ACS (r = 0.78, P < 0.01) and negatively with ANT's reaction time for alerting (r = -0.31, P = 0.049). CONCLUSIONS The MARS can reliably and validly assess six-dimension attention levels in real-world settings and is expected to be a new tool for assessing multi-dimensional attention impairments in different mental disorders.
Humans ; Adult ; Male ; Attention/physiology* ; Female ; Middle Aged ; Reproducibility of Results ; Young Adult ; Psychometrics

PURPOSE: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. METHODS: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1 - L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. RESULTS: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (F_z) of THOR-AV and THUMS changed in the similar trend. The maximum F_z ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (M_y) and the time when the maximum M_y occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of M_y measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. CONCLUSION The F_z of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on F_z. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map M_y directly because they are very different in ATD and HBM. The M_y of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.
Humans ; Lumbar Vertebrae/injuries* ; Finite Element Analysis ; Biomechanical Phenomena ; Manikins ; Spinal Injuries/physiopathology*

PURPOSE: To compare the effects of empirical and modified hemostatic resuscitation for liver blast injury combined with seawater immersion. METHODS: Thirty rabbits were subjected to liver blast injury combined with seawater immersion, and were then divided into 3 groups randomly (n = 10 each): group A (no treatment after immersion), group B (empirical resuscitation with 20 mL hydroxyethyl starch, 50 mg tranexamic acid, 25 IU prothrombin complex concentrate and 50 mg/kg body weight fibrinogen concentrate), and group C (modified resuscitation with additional 10 IU prothrombin complex concentrate and 20 mg/kg body weight fibrinogen concentrate based on group B). Blood samples were gathered at specified moments for assessment of thromboelastography, routine coagulation test, and biochemistry. Mean arterial pressure, heart rate, and survival rate were also documented at each time point. The Kolmogorov-Smirnov test was used to examine the normality of data distribution. Multigroup comparisons were conducted with one-way ANOVA. RESULTS: Liver blast injury combined with seawater immersion resulted in severe coagulo-fibrinolytic derangement as indicated by prolonged prothrombin time (s) (11.53 ± 0.98 vs. 7.61 ± 0.28, p＜0.001), activated partial thromboplastin time (APTT) (s) (33.48 ± 6.66 vs. 18.23 ± 0.89, p＜0.001), reaction time (R) (min) (5.85 ± 0.96 vs. 2.47 ± 0.53, p＜0.001), decreased maximum amplitude (MA) (mm) (53.20 ± 5.99 vs. 74.92 ± 5.76, p＜0.001) and fibrinogen concentration (g/L) (1.19 ± 0.29 vs. 1.89 ± 0.32, p = 0.003), and increased D-dimer concentration (mg/L) (0.38 ± 0.32 vs. 0.05 ± 0.03, p = 0.005). Both empirical and modified hemostatic resuscitation could improve the coagulo-fibrinolytic states and organ function, as indicated by shortened APTT and R values, decreased D-dimer concentration, increased fibrinogen concentration and MA values, lower concentration of blood urea nitrogen and creatine kinase-MB in group B and group C rabbits in comparison to that observed in group A. Further analysis found that the R values (min) (4.67 ± 0.84 vs. 3.66 ± 0.98, p = 0.038), APTT (s) (23.16 ± 2.75 vs. 18.94 ± 1.05, p = 0.001), MA (mm) (60.10 ± 4.74 vs. 70.21 ± 3.01, p < 0.001), and fibrinogen concentration (g/L) (1.68 ± 0.21 vs. 1.94 ± 0.16, p = 0.013) were remarkably improved in group C than in group B at 2 h and 4 h after injury. In addition, the concentration of blood urea nitrogen (mmol/L) (24.11 ± 1.96 vs. 21.00 ± 3.78, p = 0.047) and creatine kinase-MB (U/L) (85.50 ± 13.60 vs. 69.74 ± 8.56, p = 0.013) were lower in group C than in group B at 6 h after injury. The survival rates in group B and group C were significantly higher than those in group A at 4 h and 6 h after injury (p < 0.001), however, there were no statistical differences in survival rates between group B and group C at each time point. CONCLUSIONS Modified hemostatic resuscitation could improve the coagulation parameters and organ function better than empirical hemostatic resuscitation.
Animals ; Rabbits ; Resuscitation/methods* ; Liver/injuries* ; Seawater ; Blast Injuries/therapy* ; Fibrinogen/administration & dosage* ; Male ; Tranexamic Acid/administration & dosage* ; Immersion ; Hydroxyethyl Starch Derivatives/administration & dosage*